Hibernating mode does not save what I left it
This if or my Flex 15 laptop. When I click on Hibernate, it would take about 5 minutes before it turns off. After turning the laptop back on, it would start up like a fresh start instead of where I had it left off when I hibernate it. It is supposed to save what I had on the desktop and then resume what I had it on.
I have checked the power management and everything seems to be what it is supposed to be.
As for sleep mode, it simply shuts down the laptop, not going in to sleep mode.
Anybody had the same problem and what did you have to do to resolve it. I have searched through the forum already.
Looks like it had to go with the Kernel-processor-power. Speed if processor is being limited by system firmware. Processor has been in this reduced performance state for 71 seconds since the last report. Also a various others. I may have a friend look at it.
Similar Messages
-
What it says in the title.
I have an older mac and it worked perfectly until about an hour ago when I shut it down because we needed the room dark for a presentation and the screen saver was putting out light.
Now it won't turn back on. It plays the start up music but the screen stays blank.
The CMD+OPT+R for recovery mode doesn't do anything, the keyboard is wireless so the command doesn't get to the computer and that's the only keyboard I have since that's the one it came with.
I'm looking at making a USB recovery disk but it says that I should click on "Options" in the Disk Utility but there is no options button or menu to click.
From here: OS X: About Recovery Disk Assistant in step 3 I get stuck.
Also it says that if I make a drive on this computer which has an older OS it might not work on the broken machine with Mavericks.
This machine literally worked and I turned it off and now it does not work and there seems to be nothing I can do... ***...kodemage wrote:
well, then recovery mode does not work. I've tried all the key combinations I've seen on line. Command+R, Command+Option+R, Command+Option+P+R, none of these work.
I don't believe there is anything we can do on a forum to help then, you need to take it into a AASP and have it professionaly diagnosed. If you don't know how to locate an AASP in your area you can begin by using Contact Apple for support and service
Good luck. -
I am trying to save a large file on Illustrator CS6 and it does not save and instead says "Unknown Error Occurred." What do I do?
The file has 4 artboards with webpage designs. I tried to take two of the artboards, create a separate doc with those two, and save, but the result was the same.
However, I am able to save simpler, smaller files.
I need to not lose these files and I am afraid to quit and restart and lose my unfinished work.
Any advice?What happens if you choose this option?
-
Macbook pro will not save what I was working on when in sleep mode
Everytime my computer goes into sleep mode or battery dies, it does not remember what I was last working on. It starts all over again
Open a TextEdit window and type something. Quit the application and relaunch it. Does the window open with the text you entered?
-
My MacBook Pro does not save bettery.I use 100% bettery charge 3-4 hrs instead of 7 hrs.what could be the problem?
7 hours mentioned is possible when run under lab conditions.
Running GPU intensive applications will decrease battery runtime.
Maximize Runtime / Tips for maximizing your battery charge
http://support.apple.com/kb/HT1446
Runawy applications can shorten battery runtime,affect performances and
increase heat and fan activity.
http://support.apple.com/kb/TS1473 -
Firefox 3.6.3 does not save history, nor passwords. I have read the forum and checked my settings in Privacy (all ok), I restarted Firefox in Safe mode (it still does not remember history or passwords). Running on XP. I think these problems started when I upgraded to 3.6.3.
I had the same problem after an upgrade to 3.6.3.
I was using password manager for a number of web sites before. Not using cookies but password manager.
After 3.6.3 auto upgrade it did not work.
I could not enter private browsing mode.
When I looked in tools>options>security at my saved passwords the list was blank. The button in the saved passwords dialog that normally says "Show saved passwords" was actually blank (the button was there but there was no text on it).
I did have my old bookmarks and was able to create new ones but oddly the bookmark all tabs menu function wouldn't work.
I decided to reinstall firefox 3.6.3. There is no way something with that many bugs got out!
I was able to get the full firefox executable from http://mozilla.com
I closed all firefox windows and ran the installation.
After re-running the install and starting firefox everything was fine. It must have been a bad download or the original install got messed up somehow.
I hope you have the same good fortune I had! -
Hallo! I installed ios 6.0 to my iphone 4s, but the panoramic shooting mode does not appear. Tell me please what is the proplem?
Camera App>Options:
-
Firefox does not save toolbar I made
Since FF upgraded me to Firefox 23 My tool bars are messed
Every time I make a new toolbar Via "Customize" > "Add New Toolbar" after I exit it does not save.
Yes I read over 10 different articles on it.
1) I deleted the localstore.rdf and started from scratch. After 15 minutes of dragging all the icons to various toolbars I close out of Customize. I then restart Only to find my toolbar not saves and icon missing (placed back into the Customize Box)
2) Only solution ALWAYS given is going to Safe Mode and resetting everything.
That requires me to spend 5 hours backing all the settings and data I have saved in the various 189 items loaded.
Why so many? If not that many I would have to spend 6 hour more all day on my computer doing things that many of these addons do for me. Time is Money.
3) This is not the first time over the 8 years or so of using Firefox this has occured.
4) Question why doen't save when you close out of "Customize" than when you exit? Plus what in Firefox is messed up that it is not saving right?Nope, I tried it again and added buttons to the New Tool bar I made and everything disappeared once I restarted Firefox up again. So they have not solved it. From FF 23 now on FF26 and it has not been fixed
-
GS70 laptop power setting issue (it does not save my setting even with admin)
laptop is decent, but the power setting does not save when i (1) shutdown (2) go through fn + F5;power modes on msi gs70
I want to change simple power options such as:
-do nothing when close lid
-other etc in power options
will revert back to original out of box setting when i shutdown....
Its not cool that I have to change 5 power option setting so that I can leave my laptop to download while I am out of house.
what i've tried:
I changed regedit for power setting option to give me admin/allow save/apply on power settings (this is windows 8)
Tried w/o messing with regedit but didnt work before messing with regedit on admin/saves
some help would be great! Been 6 mths with this power option issue :/ already at the point to chuck it out of my 20th floor windowI had the same problem do this
http://www.raymond.cc/blog/archives/2011/03/23/enable-save-tabs-on-exit-for-firefox-4/
I do what this guy said and it is allright again -
I want Firefox to save my passwords as it has in the past, but now it is not doing so. I am using version 6.0.2, I see the pop up asking to remember the password, but firefox does not save the passwords. What can I do to correct this so FF starts saving my passwords?
Firefox 4 and later versions place a key icon on the location bar that allows to (re)open the dialog to save the password at any time.<br />
That pop-up dialog has a button labeled with "Remember Password".<br />
If you click the arrow next to that button then you see the other choices ("Never Remember Password for this site", "Not Now").<br /> -
my sons ipod is disabled from trying password to many times my usb port on my computer does not work. what else can i do to get this disabled off my sons ipod please help!!!
The only thing you can do is place the iPod in Recovery mode and restore via iTunes on a computer. It is a good security feature.
-
just got photoshop cc 2014 on windows 8.1 64 bit, and it starts up on the white layout and and whenever I start a project it is in a window? Also whenever I try to change on of these it does not save. I am using the trial. Basically nothing saves and it was all screwed up when I first got it.
Do a screen screen capture and post it here so we can see what you stating about a white layout...
-
Acrobat 9.4.2 does not save/export all graphic formats
Dear all,
Obviously i had my glass of wine to early! See http://forums.adobe.com/thread/798630 for the whole story of my re-re-re-istallation of Acrobat.
The installation of 9.0 from the TCS2 DVD was OK
After update to 9.2 my tests displayed correct results for all desired tasks
After the update to 9.4.2 i obviously did not test thoroughly enough (hence the glass of whine).
Later it turned out that 9.4.2 does not save/export graphic formats:
pdf (all flavours), eps and ps are exported correctly
html (all flavours) export a html file and the image as jpg correctly
jpg, jp2 does not save anything, and no error message gives a hint
doc, rtf save issue error message "Save As failed to process this document. No file has been created"
png and tif do not save anything, and no error message gives a hint
xml table and xml export correctly
txt (both flavours) are exported correctly
Hence the only method i can get a picture is to export as HTML and through away the HTML... or: enlarge the picture as much as possible on the screen and take a screen shot.
What is missing in this installation?
During my re-re-re-installtions some Windows updates may have happened.
Any help available for this issue?
Klaus Daub eThe story goes on and hopefully Adobe has an answer/fix for this
There was an automatic update from 9.4.2 to 9.4.3, but the problem still existed.
So I decided to uninstall Acrobat and re-install it for the nth time: start with the installation of 9.0 from TCS2, reboot, update to 9.2, reboot, update to 9.4.3 and reboot again.
The result is very mixed (and this was alrady with the newly installed 9.0):
Save as RTF or DOC creates RTF and DOC files - although the contents is not that useful.
Save as PNG is OK
Save as JPG, JP2 or TIF works, but it turns out, that the files are all PNG (although with the various extensions)!
Creating a snapshot now works correctly. The clipboard receives a bitmap. However: although I have set the preferences for the snapshot to be of 96 dpi the bitmap gets the property 72 dpi!
Setting acrobat.exe to be Compatible to XP SP3 does not change a jota.
Keep in mind: on Windows XP things worked correctly for a long time. Switching to Window 7, x64 creates this strange problem.
I need to start with Acrobat from the TCS2 DVD, because otherwise I do not get the correct implementation for working with FrameMaker.
I'm very reluctant to buy Acrobat X, for me there are too many gimmics there (besides the costs).
Klaus Daube -
My version of LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits done in the basic module. That means that I can correct exposure, highlights, shadows etc. but once I go to another picture and returned to the edited one the histogram (on the edited photo) and specifically the clipping triangles are white or some other color. This is normally suppose to indicate that some channel or all channels are clipped in the highlight/shadow areas. If I adjust any slider in the Basic panel even as little as one +/- value or press the J-key, the histogram will now show the original edit. Moving on to another photo and then returning to to previously edited one and again the edits are "not saved" and I have to hit the J-key or adjust a slider to see the previously edited information reflected in the histogram.
This is especially frustrating for fours reasons. If I have edited a shoot and return to it I cannot see from the clipping information whether the original edit was correct and of course I might re-edit it (to some now incorrect value). This brings up the second issue synchronization. I can't rely on it because if I go back to fine tune a specific image in the batch the triangles are white or some other color for that and every image. I have to hit the J-key to show/hide clipping or the back slash key to see before/after previews. This is the third issue which is very time consuming and inefficient regarding my workflow. The forth issue is that I have noticed that normally when an image is saved in PS, LR adds a copy of the saved version to its catalogue. I have noticed that the PS to LR saves are all wrong in terms of exposure (they are much lighter in tone) than the original LR edit and the PS edit on my screen. If I check the PS to LR photo in LR I notice that the Basic panel values have been changed and that I have to sync the image with the originally edited RAW/NEF LR file to get it to look the same.
Note 1). I am using an Apple cinema display and a calibrated Eizo ColorEdge monitor to view my NEF files. I have reverted back to using LR 4 however I am not sure if I should expect compatibility problems with Camera Raw 7.4 in LR 4 vs. Camera Raw 8.6 in LR 5.
Note 2.) I am going to do an import converting everything to .dng to see if this is a work around.
Note 3). I would be interested in knowing if this issue is related to the PS RAW engine ver. 8.6, the Adobe created NEF calibrations or LR 5.
Note 4). I have duplicated this issue in OS X 10.8.5, OS X 9.xx and OS X 10.10.1
Hopefully someone else has noticed this problem. Any shared information would be valuable. Thanks for the reply.Happy New Year!
The Develop panel Tone settings in your Dec 31 screenshot show both the Highlights and Shadows controls set to negative values (-48 and -19). For most images (such as this model shot) they should be set to opposite values (-Highlights and +Shadows). To try and duplicate your issue I used negative values for both of these controls with a similar high contrast image. I noticed that the Shadows control becomes non-linear when both the Highlights and Shadows controls are set to negative values. As I moved the Shadows control from a positive value the Shadows clipping indicator comes ON as expected. Moving the Shadows control to a value caused the clipping indicator to turn OFF and moving it further negative caused it to turn back ON again.
The following screenshots demonstrate the issue with only Highlights & Shadows controls applied as shown.
The Highlights & Shadows controls set just to the threshold of extinguishing the clipping indicators.
Moving the Shadows control toward negative causes the Shadow clipping indicator to come ON (as expected), but at-13 it goes OFF again!
Moving the Shadows control further negative causes the Shadows clipping indicator to come back ON at -33.
This is probably normal behavior for the PV2012 Image Adaptive Tone controls as they were not designed to be used way (- - or ++ Highlights & Shadows). The PV2012 Tone controls all interact with each other, which is why it is suggested to adjust them from the Top down starting with Exposure. For most images using -Highlights and +Shadows of near equal value produces good results.
I still can't duplicate the change in clipping indicators after selecting another image, so it may be unique to certain camera models and/or lighting conditions.
SUGGESTION
Try one of the image files that exhibits this issue using the following PV2102 Tone control adjustment procedure:
Start with all of the Tone controls at their default 0 settings and adjust them from the top-down in the order shown below.
Set Exposure to correct midtone brightness ignoring the highlight and shadow areas for now. Setting Exposure slightly higher (+.25 to +.50 EV) than what looks correct for the midtones seems to work best with most images.
Leave Contrast at 0 for now. It’s usually better to adjust this after the first pass.
Adjust Highlights so that blown out areas are recovered and “fine tonal detail” is revealed.
Adjust Shadows to reveal fine detail in dark areas. For most normal images simply setting +Shadows = -Highlights (Example +50 and -50) works very well.
The Whites control sets the white clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
The Blacks control sets the black clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
Now go back and adjust the Contrast control to establish the best midtone contrast
If necessary “touch-up” the controls using the same top-down workflow.
If the issue persists I suggest Exporting an image to DNG file format with the settings that exhibit the issue and post it to Dropbox or other file download site. -
Recording does not save the file
We are facing a serious problem with Captivate 2. After
recording about 40 -50 slides it does not save the file.
The system hangs for several minutes and there’s no
response.To analyze this problem we have tried out User Forums and
FAQs.In the User Forum too similar problems are reported. For
example, visit:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=67&catid=464&threadid =1261116&enterthread=y
In fact, in our team Captivate is loaded on a standalone
hi-end system with ample space and memory.
We have also tried workarounds to address this issue. For
example, we deleted all temp files from library and we also saved
it on a short path like c:/project.
Nothing works!!!Hi Madduser and welcome to our community
When you say
To analyze this problem we have tried out User Forums and
FAQs are we to assume you simply searched them and read the
threads? I'm assuming this because this is your first post here.
You will note that the thread you linked to mentioned the
person was attempting to save on a network. I do see you have tried
using the shortened local path to no avail, so I'm guessing the
network is ruled out here.
As usual, I've got more questions than answers, but hopefully
as we work through them something will come to light.
* Have you EVER been able to create and save things using
Captivate? Or did you just install it and it's never worked for
you?
* Have you tried what is outlined in the following Technical
Note?
Click here to read the
Technical Note
Cheers... Rick
Maybe you are looking for
-
ITunes opens suddenly when opening Safire.
iTunes opens (with the latest page I have been on) each time I open a page in Safire. What can be wrong ? Has 'Versions' (when logging out from my computer) linked these 2 programs ?
-
HT1277 How to delete/remove mail accounts. After I restart mail they all come back.
I would like to remove mail accounts on my Mac. I press"-" and account is gone, however as soon as I start mail again it shows back. Is there a way to remove it so it wouldn't come back? Thank you.
-
HT1338 An error occurred while partitioning the disk in Bootcamp?
Any idea's why? Installed windows on my old mac with no problems.
-
Apple Servers versus PC Servers - Who wins?
Hi I'm starting a new business and have almost decided to use Mac in the office. One question remains though - servers! To-date I have only used Mac at home on a stand alone basis. I've only ever used PC's in work and although not 100% sure why I've
-
Is there a way to use my computer in the docking station and close the laptop? When I close it, the laptop goes to sleep.