Hibernation does not shutdown the computer

Hello,
the hibernation was working perfectly until one of the last updates. I can not say exactly when things get broken since I didn't rebooted my computer for weeks (it was in hibernation only) and so the last kernel updates were probably not applied... However, after a real reboot, when I hibernate now, everything works fine except that I have to "shutdown" the computer manually pressing the on/off button myself. When I start the computer again, it resumes from hibernation perfectly without doing the whole start sequence...
Does someone have an idea where I could look for to avoid pressing the on/off button myself to close the computer?
Thanks for your help,
Salvatore
PS: I am working with KDE and have an ATI graphic card.

I investigate the polkit area... arrived to the file "/usr/share/polkit-1/actions/org.freedesktop.login1.policy" that I modified frw time ago (to enable my wife to hibernate when my session was open). I thought the problem may come from here... so I reinstalled systemd and other small package to recover the original configuration of the files in the directory /usr/share/polkit-1/actions/.
But it is still not working... I start to loose my hope
You can find below the end of /var/log/pm-powersave.log :
/usr/lib/pm-utils/power.d/laptop-mode false: success.
Running hook /usr/lib/pm-utils/power.d/pcie_aspm false:
/usr/lib/pm-utils/power.d/pcie_aspm: ligne 9 : echo: erreur d'écriture : Opération non permise
/usr/lib/pm-utils/power.d/pcie_aspm false: success.
Running hook /usr/lib/pm-utils/power.d/readahead false:
Setting readahead for /dev/sdb1 to 256...Done.
Setting readahead for /dev/sda1 to 256...Done.
Setting readahead for /dev/sdb6 to 256...Done.
Setting readahead for /dev/sdb7 to 256...Done.
Setting readahead for /dev/sdb8 to 256...Done.
/usr/lib/pm-utils/power.d/readahead false: success.
Running hook /usr/lib/pm-utils/power.d/sata_alpm false:
Setting SATA APLM on host2 to max_performance...Done.
Setting SATA APLM on host3 to max_performance...Done.
Setting SATA APLM on host4 to max_performance...Done.
Setting SATA APLM on host5 to max_performance...Done.
/usr/lib/pm-utils/power.d/sata_alpm false: success.
Running hook /usr/lib/pm-utils/power.d/sched-powersave false:
**sched policy powersave OFF
/usr/lib/pm-utils/power.d/sched-powersave false: success.
Running hook /usr/lib/pm-utils/power.d/wireless false:
/usr/lib/pm-utils/power.d/wireless false: success.
Running hook /usr/lib/pm-utils/power.d/xfs_buffer false:
/usr/lib/pm-utils/power.d/xfs_buffer false: success.
Running hook /usr/lib/pm-utils/power.d/hal-cd-polling false:
/usr/lib/pm-utils/power.d/hal-cd-polling false: success.
Running hook /usr/lib/pm-utils/power.d/intel-audio-powersave false:
Setting power savings for snd_hda_intel to 0...Done.
/usr/lib/pm-utils/power.d/intel-audio-powersave false: success.
Running hook /usr/lib/pm-utils/power.d/journal-commit false:
Setting journal commit time for / to 0...Done.
Setting journal commit time for /media/BACKUP to 0...Done.
Setting journal commit time for /media/DIVERS to 0...Done.
Setting journal commit time for /media/MEDIA to 0...Done.
Setting journal commit time for /media/DATA to 0...Done.
/usr/lib/pm-utils/power.d/journal-commit false: success.
Running hook /usr/lib/pm-utils/power.d/laptop-mode false:
Laptop mode disabled.
/usr/lib/pm-utils/power.d/laptop-mode false: success.
Running hook /usr/lib/pm-utils/power.d/pcie_aspm false:
/usr/lib/pm-utils/power.d/pcie_aspm: ligne 9 : echo: erreur d'écriture : Opération non permise
/usr/lib/pm-utils/power.d/pcie_aspm false: success.
Running hook /usr/lib/pm-utils/power.d/readahead false:
Setting readahead for /dev/sdb1 to 256...Done.
Setting readahead for /dev/sda1 to 256...Done.
Setting readahead for /dev/sdb8 to 256...Done.
Setting readahead for /dev/sdb7 to 256...Done.
Setting readahead for /dev/sdb6 to 256...Done.
/usr/lib/pm-utils/power.d/readahead false: success.
Running hook /usr/lib/pm-utils/power.d/sata_alpm false:
Setting SATA APLM on host2 to max_performance...Done.
Setting SATA APLM on host3 to max_performance...Done.
Setting SATA APLM on host4 to max_performance...Done.
Setting SATA APLM on host5 to max_performance...Done.
/usr/lib/pm-utils/power.d/sata_alpm false: success.
Running hook /usr/lib/pm-utils/power.d/sched-powersave false:
**sched policy powersave OFF
/usr/lib/pm-utils/power.d/sched-powersave false: success.
Running hook /usr/lib/pm-utils/power.d/wireless false:
/usr/lib/pm-utils/power.d/wireless false: success.
Running hook /usr/lib/pm-utils/power.d/xfs_buffer false:
/usr/lib/pm-utils/power.d/xfs_buffer false: success.
Running hook /usr/lib/pm-utils/power.d/hal-cd-polling false:
/usr/lib/pm-utils/power.d/hal-cd-polling false: success.
Running hook /usr/lib/pm-utils/power.d/intel-audio-powersave false:
Setting power savings for snd_hda_intel to 0...Done.
/usr/lib/pm-utils/power.d/intel-audio-powersave false: success.
Running hook /usr/lib/pm-utils/power.d/journal-commit false:
Setting journal commit time for / to 0...Done.
Setting journal commit time for /media/BACKUP to 0...Done.
Setting journal commit time for /media/DATA to 0...Done.
Setting journal commit time for /media/MEDIA to 0...Done.
Setting journal commit time for /media/DIVERS to 0...Done.
/usr/lib/pm-utils/power.d/journal-commit false: success.
Running hook /usr/lib/pm-utils/power.d/laptop-mode false:
Laptop mode disabled.
/usr/lib/pm-utils/power.d/laptop-mode false: success.
Running hook /usr/lib/pm-utils/power.d/pcie_aspm false:
/usr/lib/pm-utils/power.d/pcie_aspm: ligne 9 : echo: erreur d'écriture : Opération non permise
/usr/lib/pm-utils/power.d/pcie_aspm false: success.
Running hook /usr/lib/pm-utils/power.d/readahead false:
Setting readahead for /dev/sdb1 to 256...Done.
Setting readahead for /dev/sda1 to 256...Done.
Setting readahead for /dev/sdb6 to 256...Done.
Setting readahead for /dev/sdb7 to 256...Done.
Setting readahead for /dev/sdb8 to 256...Done.
/usr/lib/pm-utils/power.d/readahead false: success.
Running hook /usr/lib/pm-utils/power.d/sata_alpm false:
Setting SATA APLM on host2 to max_performance...Done.
Setting SATA APLM on host3 to max_performance...Done.
Setting SATA APLM on host4 to max_performance...Done.
Setting SATA APLM on host5 to max_performance...Done.
/usr/lib/pm-utils/power.d/sata_alpm false: success.
Running hook /usr/lib/pm-utils/power.d/sched-powersave false:
**sched policy powersave OFF
/usr/lib/pm-utils/power.d/sched-powersave false: success.
Running hook /usr/lib/pm-utils/power.d/wireless false:
/usr/lib/pm-utils/power.d/wireless false: success.
Running hook /usr/lib/pm-utils/power.d/xfs_buffer false:
/usr/lib/pm-utils/power.d/xfs_buffer false: success.
There is a strange line with an error (in French):
/usr/lib/pm-utils/power.d/pcie_aspm: ligne 9 : echo: erreur d'écriture : Opération non permise
that means : line 9: write error - operation not allowed.
Any idea how can I allow pcie_aspm to shutdown my computer ?

Similar Messages

  • The file may be corrupt. The file header checksum does not match the computed checksum.

    I just put Vista Home Premium on a computer I was going to give to my son. Upon adding some hardware I kept getting the above screen. "The file may be corrupt. The file header checksum does not match the computed checksum.' When I booted in safe mode and slow boot, it hung on crcdisk.sys. I removed everything except the keyboard hhd dvd and fdd and it still does the same thing. I tried to reinstall Vista but it keeps hanging. From reading a lot of other threads this seems to be a big problem. I doubt if the product should have been marketed. But.... If anyone can help me get it booted I would like to try XP instead. I tried to install XP on the same drive and it hungs there too.

    Hi ballen6721,
    Thank you for the post.
    This issue can occur if the newly installed hardware device is incompatible with the system.
    Based on the current situation, I suggest trying the following steps to troubleshoot the issue:
    Method 1 Device Clean Boot
    ============================================
    Please unplug all unnecessary devices such as sound card, printer, network card and TV card.
    Method 2: Startup Repair from the Windows Recovery Environment (WinRE)
    ============================================
    1. Insert the Windows Vista installation disc into the disc drive, and then start the computer.
    2. Press a key when the message indicating "Press any key to boot from CD or DVD …". appears.
    3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
    4. Click Repair your computer.
    5. In the System Recovery Options dialog box, choose the drive of your Windows installation and click Next.
    6. At the System Recovery Options Dialog Box, click on Repair your computer.
    7. Click the operating system that you want to repair, and then click Next.
    8. In the System Recovery Options dialog box, click Startup Repair.
    Method 3: Use the Windows Recovery Environment (WinRE) to run System Restore ============================================
    1. Insert the Windows Vista installation disc into the disc drive, and then start the computer.
    2. Press a key when the message indicating "Press any key to boot from CD or DVD …". appears.
    3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
    4. Click Repair your computer.
    5. In the System Recovery Options dialog box, choose the drive of your Windows installation and click Next
    6. At the System Recovery Options Dialog Box, click on System Restore.
    7. Follow the System Restore Wizard instruction and choose the appropriate restore point.
    8. Click Finish to restore the system.
    Note: If you computer is an OEM one, the method to enter WinRE can be different, you may contact your OEM to consult how to enter WinRE.
    Can we start the computer now?
    If the issue persists, please help confirm the following points:
    1. What hardware changes have you made recently?
    2. Can we enter Safe Mode now?
    I look forward to hearing from you.
    Best regards,
    Tim Quan
    Microsoft Online Community Support

  • "the file header checksum does not match the computer checksum." Pavilion P6000

    HP Pavilion P6000
    Windows 7 64-bit
    The file is possible corrupt.  The file header checksum does not match the computer checksum
    I was previously getting blue screens saying things like "Memory_Management"

    I see you have damaged both your hardrive(hardware) and your operating sytem (corrupted too, software)
    You may want to run an diagonstic test of your hard drive complete before trying to reinstall windows.
    Press ESC right after power button and repeatdley and look for Diagnostic test and start up test and hard drive test.
    Please report results.
    Sorry because of different timezone I might not be able to help/reply you right away.IF that happens I deeply apologize!
    **Click the White thumb if you like the answer.**
    **Please mark Accept As Solution if it solves your problem and only solves your problem, if you have any more questions please ask, this also helps others to solve related issues.**
    Feel yourself like home here, we are all happy to help, if you have an question reply or start a topic or pm me or an expert.

  • System Recovery media does not support the computer. HELP!!!

    Ok problem here the recovery discs that were created do not work. And this is where I'm stuck.
    First the details. It's a DV7-6163CL Laptop with windows 7. The discs were created shortly after we got the computer. The reason we have to try and recover the computer is hard drive #1 failed and failed hard. Hard drive was replaced. Now after trying to use the recovery discs we get the error message after a few windows loading screens in Recovery Manger.
    "The system recovery media does not support this computer. You are not able to restore this computer with the media."
    Well Hp doesn't support his platform anymore due to its age.
    Is there anything I can do next to formatting the computer and getting a new OS?

    Many times this error is caused by missing info in BIOS. Can you enter BIOS-F10 at power on- and check for serial number,etc?
    Sometimes a new hdd requires prepping with Cyberlink Utility cd first. Download and Save the file. Once download is complete, put a blank cd in your drive and click the file to create a boot cd. Boot with this cd and wait until you get a green check mark indicating hdd is ready. Remove the cd , insert first Recovery Disk and restart the laptop.
    http://ftp.hp.com/pub/softlib/software11/COL32372/​pv-80183-1/sp44645.exe
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • I had a hard drive crash so replaced it and now iTunes does not recognize the computer as authorized to play some songs in my playlist.  help

    I had a hard drive crash, replaced the hard drive and now iTunes does not recognize or authorize my iMac to play some songs.  help

    iCloud Backup is for your iPad, not for your computer.
    Whatever you bought from iTunes is yours forever and can be downloaded as many times as you want. This assumes what you purchased is still available in the Store.
    Here is the procedure for your reference.
    On a computer, launch iTunes. Click on iTunes Store on the left
    On the right you will see this
    "Sign in" using the Apple ID used to purchase your songs, then click on "Purchased" (with the orange blob)
    On the summary page that appears select the tab "Not on This Computer" on the right.
    On the list that appears, select what you want and then click the "Download" button.
    Whatever you have that did not originate from iTunes will have to be obtained from whatever means you used to obtain it in the past.

  • "The file is possibly corrupt. The file header checksum does not match the computed checksum."

    Yesterday evening, I accidentally dropped my Probook 6565b. It bluescreened with strange red boxes around the text, so I thought the screen or something was damaged. I emergency shut down the computer, and started it up again. It was visibly slower, but I was able to use it, so, relieved, I turned it off again and went to bed.
    This morning, I tried to turn it on again. It started out normally (and I am able to access the start up screen) . But afterwards, it gives me a blank dark blue screen (like before you see the Windows logo) and it stays there for around 15 seconds before it gives me the error.
    I have no idea what to do, so any advice would be greatly appreciated!
    I think my operating system is Windows 7, but I'm not sure.
    Thank you.

    I see you have damaged both your hardrive(hardware) and your operating sytem (corrupted too, software)
    You may want to run an diagonstic test of your hard drive complete before trying to reinstall windows.
    Press ESC right after power button and repeatdley and look for Diagnostic test and start up test and hard drive test.
    Please report results.
    Sorry because of different timezone I might not be able to help/reply you right away.IF that happens I deeply apologize!
    **Click the White thumb if you like the answer.**
    **Please mark Accept As Solution if it solves your problem and only solves your problem, if you have any more questions please ask, this also helps others to solve related issues.**
    Feel yourself like home here, we are all happy to help, if you have an question reply or start a topic or pm me or an expert.

  • Foxfire just updated to 3.6.14. Now when I open Facebook, in the secured site, it keeps asking the name of this computer each and every single time. Facebook does not recognize the computer, as it did before.

    As above, whenever I reopen Facebook, I have to put in my log in information, and then I have to put in "home", as the name of my computer, and I have to do this each time I open up Facebook, after I just got the new Firefox update to 3.6.14.

    * Websites remembering you and automatically log you in is stored in a cookie.
    * Create an allow cookie exception (Tools > Options > Privacy > Cookies: Exceptions) to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
    * In [[Private Browsing]] mode all cookies are session cookies that expire if that session is ended, so websites won't remember you.
    * Do not use [[Clear Recent History]] to clear the "Cookies" and the "Site Preferences"
    Clearing "Site Preferences" clears all cookies, images, pop-up windows, software installation, and password exceptions.
    * http://kb.mozillazine.org/Cookies

  • When I connect video projector via mini VGA to MacBook Air, the projector will not recognize the computer.

    I have no problem projecting PPT but when I try to project a video in whatever format, the projector does not recognize the computer.  Suggestions?

    Sorry I'm no help. I'm just here to say that I'm having the same issue and add a bit of info. I've always projected DVDs, with no problem, until I upgraded to OS X Mavericks. I'm teaching in the same room this semester, and now as soon as I plug in the VGA cord the DVD shuts down and I get a message saying "disc not supported." (The DVDs play fine on my computer--the problem arises when I plug in the cord.) Like you, I have no problem projecting my PowerPoints or images from the web. It's just the DVDs. Anyone? Help!

  • Computer restarts (does not shutdown) when iPod is connected

    This issue has probably been covered in these forums,
    but I didn't read anything about this.
    My Computer (G4 on Tiger) restarts (does not shutdown) when my iPod Classic 30GB is connected
    via USB. Is that normal? Everytime I shutdown my computer and I forget to disconnect my iPod
    it restarts. The problem is that my G4 is connected to my sound system and I hear the loud opening BONG sound when the OS boots up. Very annoying, and dangerous for my speaker system...
    I know there are third party utilities that enables users to kill that start up sound but if I repair permissions, clean PRAM, etc those settings are removed and the original Apple factory settings come back. Is there any way to kill that sounds PERMANENTLY! with Mac OS Tiger.
    Thanks

    Hmm... You might want to consider posting this in the OS X forum as well. I know with my MacBook (running Leopard), if I mute the system volume prior to shutting down the computer, the next time I boot up, I don't hear the startup chime.
    It's not normal for your computer to restart itself coinciding with iPod actions. Do you have any other software applications installed that interact with the iPod that might be causing this?
    CG

  • I have an Ipod Touch 4g. My computer broke. I have a new computer now. My problem is that my new computer  itunes library does not recognise the content already on my ipod. Help please

    I have an Ipod Touch 4G.   My computer broke.  I now have a new computer .  I have NO access to old computer.  The itunes on my new computer recognises by Ipod but not the music content already on my ipod.  This means it does not  show the content in the library on itunes any more.  The content on my ipod is not purchased from itunes store.  Can i get it to show up in the `new` library?    Is this also preventing me from downloading new items into my ipod - as i can download new discs into the library, but they will not load into the ipod.   Your help would be appreciated - cant bear another sleepless night.  Thank you

    I dont know how helpful this will be but here we go:
    try syncing your ipod again
    do you still have these cds? try reburning them to you library
    restart itunes
    restart the computer
    hardware reset ipod touch
    Heres how to do this
    Hold down power and home button at the same time until the screen goes black, ignore the slide to power off arrow
    Idevice will now restart on its own, this might take longer then when waking it from shut down
    6. now try step 1 again
    note: try any of these ideas they are not a set order of instructions

  • The security database on the server does not have a computer account for this workstation trust relationship

    When I try to log on to my DC it says "The security database on the server does not have a computer account for this workstation trust relationship". It won't let me log on. I installed another server server 2012r2  (its virtual )
    and I can get to ADSI edit. 
    I think what happened was I had a pc that could not connect without unplugging the network cable. So I found this fix 
    FIX: “The security database on the server does not have a computer account for this workstation trust relationship”2032011
    I’ve seen a lot of solutions, or suggestions rather, with regard to the error in the title of this post.  In my experience, the problem can almost always be resolved without extra domain add/removes and reboots, which is the most prevalent solution I have
    seen around.  Usually, this issue is due to a mismatch between attributes of the computer account in Active Directory and those values on the system itself.  Here are the steps I take to fix this issue when it crops up:
    Open up Active Directory Users & Computers pointed to the domain the computer account resides in
    From the “View” pull-down menu, make sure that “Advanced Features” is checked
    Navigate to the part of your organizational unit (OU) structure where the computer account for this server resides
    Open the Properties for the computer object
    Choose the “Attribute Editor” tab on the Properties dialog box
    Check the Attributes dNSHostName & servicePrincipalName – anywhere that a fully qualified hostname is specified (e.g. myserver.mydomainname.com), make sure that the entry matches the hostname
    you have configured when you go here on your server: Start -> Computer -> Right-Click, Properties -> Change Settings (under “Computer name, domain… settings”) -> Full Computer Name
    As an example, for a fictitious W2K8 R2 server whose Full Computer Name is “srv1.mydomainname.com”, these attribute/value pairs should be in Active Directory:
    dNSHostName:
    srv1.mydomainname.com
    servicePrincipalName:
    HOST/SRV1
    HOST/srv1.mydomainname.com
    RestrictedKrbHost/SRV1
    RestrictedKrbHost/srv1.mydomainname.com
    TERMSRV/SRV1
    TERMSRV/srv1.mydomainname.com"
    Not reading it carefully I add a computer with the same name as the pc having the issue and followed the above. The problem is that I did not notice that the spn did not want the name of my server (serv1) but the name of the trouble
    pc.
    dcdiag output
    PS C:\Users\administrator.TOM> dcdiag.exe
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
       ***Error: DC3 is not a Directory Server.  Must specify /s:<Directory Server> or  /n:<Naming Context> or nothing to
       use the local machine.
       ERROR: Could not find home server.
    PS C:\Users\administrator.TOM> dcdiag.exe /s:DC2
    Directory Server Diagnosis
    Performing initial setup:
       * Identified AD Forest.
       Done gathering initial info.
    Doing initial required tests
       Testing server: Default-First-Site\DC2
          Starting test: Connectivity
             The host 9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM could not be resolved to an IP address. Check the DN
             server, DHCP, server name, etc.
             Neither the the server name (DC2.TOM) nor the Guid DNS name (9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM)
             could be resolved by DNS.  Check that the server is up and is registered correctly with the DNS server.
             Got error while checking LDAP and RPC connectivity. Please check your firewall settings.
             ......................... DC2 failed test Connectivity
    Doing primary tests
       Testing server: Default-First-Site\DC2
          Skipping all tests, because server DC2 is not responding to directory service requests.
       Running partition tests on : ForestDnsZones
          Starting test: CheckSDRefDom
             ......................... ForestDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... ForestDnsZones passed test CrossRefValidation
       Running partition tests on : DomainDnsZones
          Starting test: CheckSDRefDom
             ......................... DomainDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... DomainDnsZones passed test CrossRefValidation
       Running partition tests on : Schema
          Starting test: CheckSDRefDom
             ......................... Schema passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Schema passed test CrossRefValidation
       Running partition tests on : Configuration
          Starting test: CheckSDRefDom
             ......................... Configuration passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Configuration passed test CrossRefValidation
       Running partition tests on : TOM
          Starting test: CheckSDRefDom
             ......................... TOM passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... TOM passed test CrossRefValidation
       Running enterprise tests on : TOM
          Starting test: LocatorCheck
             ......................... TOM passed test LocatorCheck
          Starting test: Intersite
             ......................... TOM passed test Intersite
    PS C:\Users\administrator.TOM> regsvr32 schmmgmt.dll
    PS C:\Users\administrator.TOM> netdig /fix
    netdig : The term 'netdig' is not recognized as the name of a cmdlet, function, script file, or operable program.
    Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
    At line:1 char:1
    + netdig /fix
    + ~~~~~~
        + CategoryInfo          : ObjectNotFound: (netdig:String) [], CommandNotFoundException
        + FullyQualifiedErrorId : CommandNotFoundException
    PS C:\Users\administrator.TOM> Setup /PrepareSchema
    Setup : The term 'Setup' is not recognized as the name of a cmdlet, function, script file, or operable program. Check
    the spelling of the name, or if a path was included, verify that the path is correct and try again.
    At line:1 char:1
    + Setup /PrepareSchema
    + ~~~~~
        + CategoryInfo          : ObjectNotFound: (Setup:String) [], CommandNotFoundException
        + FullyQualifiedErrorId : CommandNotFoundException
    PS C:\Users\administrator.TOM> netdiag /test
    netdiag : The term 'netdiag' is not recognized as the name of a cmdlet, function, script file, or operable program.
    Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
    At line:1 char:1
    + netdiag /test
    + ~~~~~~~
        + CategoryInfo          : ObjectNotFound: (netdiag:String) [], CommandNotFoundException
        + FullyQualifiedErrorId : CommandNotFoundException
    PS C:\Users\administrator.TOM> nslooup
    nslooup : The term 'nslooup' is not recognized as the name of a cmdlet, function, script file, or operable program.
    Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
    At line:1 char:1
    + nslooup
    + ~~~~~~~
        + CategoryInfo          : ObjectNotFound: (nslooup:String) [], CommandNotFoundException
        + FullyQualifiedErrorId : CommandNotFoundException
    PS C:\Users\administrator.TOM>

    Ok fixed. 
    At a elevated cmd prompt run ;
    C:\Users\administrator.TOM>setspn -x
    As you can see the DC serv1 had duplicate SPNs.
    Checking domain DC=TOM
    Processing entry 1
    HOST/serv1.TOM is registered on these accounts:
            CN=SERV1,OU=Domain Controllers,DC=TOM
            CN=C00049,CN=Computers,DC=TOM
    {14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/TOWN-HBWJ29ZOQC is registered on these ac
    counts:
            CN=Administrator,CN=Users,DC=TOM
            CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
    {14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/town-hbwj29zoqc.TOM is registered on thes
    e accounts:
            CN=Administrator,CN=Users,DC=TOM
            CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
    RestrictedKrbHost/serv1 is registered on these accounts:
            CN=C00049,CN=Computers,DC=TOM
            CN=SERV1,OU=Domain Controllers,DC=TOM
    RestrictedKrbHost/serv1.TOM is registered on these accounts:
            CN=C00049,CN=Computers,DC=TOM
            CN=SERV1,OU=Domain Controllers,DC=TOM
    found 5 groups of duplicate SPNs.
    Went to the computers OU and changed computer c00049 to the correct SPN. Now I have a new issues, I'll start a new thread.

  • Ipod touch will not turn on and computer does not recognize the device

    I tried resetting my ipod touch, but there is still no response. I have had it plugged into the computer for a couple of days. I don't know if it is charging or what because the screen won't turn on and the computer does not recognize the device. I have downloaded the latest version of iTunes, as well as restarting my computer several times. Does anyone know what to do? I would try restoring it, but like I said my computer doesn't recognize it and itunes doesn't either. Thanks!

    I just had a similar problem and tried all of the reboot techniques with no success. I knew it had to be a connection issue inside the iPod, and grasping at straws, I sprayed a little WD-40. I dried it off and let it sit overnight. Today at lunch I plugged it in to my wall charger and it began charging.
    ***FYI I know they don't recommend spraying WD-40 on your iPod, but it was a last resort for me. I was at the point of paying to send it in for repairs or throwing it away. I wouldn't try this unless you are ready to throw yours away too.

  • So my Ipod touch hasn't been connecting to computer, or charging for a week or two until i turn it off completely and now i try to reset all content and setting, the circle goes round and round for like hrs(24) and it still does not complete the reset

    so my Ipod touch hasn't been connecting to computer, nor charging for a week or two until i turn it off completely and now i try to reset all content and setting,(thinking it may connect to the computer and itunes and also charge) but the circle goes round and round for like hrs(24) and it still does not complete the reset.
    pls pls pls pls help .
    i have tried alot of solutions, but non of them have worked.

    Have you tried walking it into the nearest Apple Store and asking for assistance there...?
    I'm guessing you don't have Apple Care on it.

  • I have an iphone 5s and it is synced to itunes and works fine. previously I have downloaded audiobooks to my wifes 6th gen nano using this account - now I tunes does not recognize the device and also it seems that it is not being read by the computer?

    I have an iphone 5s and it is synced to itunes and works fine. previously I have downloaded audiobooks to my wifes 6th gen nano using this account - now I tunes does not recognize the device and also it seems that it is not being read by the computer?

    Hey Stan1958,
    Thanks for the question. I understand you are experiencing issues with your iPod nano and iTunes. Based on your symptoms, you may find the following resources helpful in resolving this issue:
    Windows
    iPod appears in Windows but not in iTunes
    iPod not recognized in 'My Computer' and in iTunes for Windows
    iTunes reports that "iTunes cannot recognize this iPod at this time"
    Thanks,
    Matt M.

  • I have just bought an iPod Nano to replace my previous one which died,when I open my iTunes it does not show the new iPod, and refuses to allow me to sync my existing library, the new iPod does not show in my computer only on devices, any suggestions ?

    Question: I have just bought an iPod Nano to replace my previous one which "died" My computer does not recognize the new iPod and only shows it in devices and printers. I cannot sync my existing iTunes to the new iPod, there is no way I can do it. Any help please?

    Hey there longislandmacca,
    It sounds like your iPod is not recognized in either Explorer, or in iTunes on your PC. That can be frustrating, expecially when its a new device. I recommend you use the following article to help resolve that issue named:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

Maybe you are looking for

  • No longer can connect to the internet after updating to 10.4.10 for Intel

    I (fortunately) use a cloning program (SuperDuper) to clone my MacBook Pro hard drive now and then on to an external Firewire hard drive... I say "fortunately" because after reading some of the problems folks were having with this most recent OS X up

  • Just updated software and now epson printer no longer works

    I'm frustrated.  I updated software ( as recommended by apple) and now my epson printer no longer is working. I've read through some threads about throwing the extension /System/Library/Extensions/AppleUSBEthernetHost.kext/Contents/MacOS/AppleUSBEthe

  • How do I add hyperlinks in the PDF output

    I am generating the PDF output from my DITA sources by using the menu option File > Save as PDF and hyperlinks are not taken into account. What can I do to get them working? Thank you for your help.

  • Installing color Laserjet 3600 driver on Windows 7 machine

    When I installed the drivers from the HP website for my color laserjet 3600n printer, it does not show up as "Printer and Faxes" it show up below as "Unspecified".  It then is not recognized as a printer, and I am unable to acess the device.  It also

  • Messaging server is very slow

    our messaging server is very slow, and there is a message in the default log as follwing: Store Warning: Database snapshot aborted. Database in uncertain state. what's the problem, thank you.