Hibernation does not work - System hangs

Hi, I have T41 laptop with Windows XP. When I tried Hiberation option, system hangs ( message - hibernating......) and does't hibernate. Can you help me with this..
thanks
-G
Solved!
Go to Solution.

Right,
Based on the info you supplied, there's one glaring issue that prevents you from using the hibernate feature successfully - the low disk space. Hibernation requires a minimum of 3GB (mostly 3.5GB as a minimum depending on what you're running - processes, etc).
Alas, one of the only ways to fix that is to upgrade to a larger capacity hard drive or remove some software to make space.

Similar Messages

  • I updated my iPad 4 iOS 8.0.2 and the camera does not work, ... Please help

    I updated my iPad 4 iOS 8.0.2 and the camera does not work and hangs and unconnected, .... Please help me in this question,... Thanks in advance

    You're welcome, but I didn't do anything. Try closing the camera app completely and reset your iPad and maybe that will help.
    In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Updating iTunes - Keyboard does not work anymore...

    I updated iTunes on both my computers today...
    Now im experiencing problems on my computers:
    - Keyboard on both computers does not work.
    - I cant log off or shutdown computer on both computers(Have to force shutdown with powerbutton)
    Now i have uninstalled iTunes and everything from Apple INC, still have the same problems...
    Does anyone have a solutions to these problems....

    After waiting for computer to shutdown for 30 min, I then got a bluescreen:
    Driver_power_state_failure
    Looked it up and seems like the new iTunes update have messed up the USB drivers on my computers...
    Ive tried to reinstall the USB driver, but it does not work(just hangs)
    Apple you messed up my computers with your software...
    So please give me a solution to this.
    Thanks!

  • I have installed windows 8 on my mac book pro with bootcamp 4 and the issue is whenever i open windows 8 , It hangs after 15 minutes and does not work . How to resolve this issue?

    I have installed windows 8 on my mac book pro with bootcamp 4 and the issue is whenever i open windows 8 , It hangs after 15 minutes and does not work . How to resolve this issue? Is it compatibility issue ?

    Please also see Boot Camp: Set the default operating system.

  • Lenovo System Update 5 does not work on my B580

    Hello,
    the Lenovo System Update 5 program does not work on my B580 laptop.
    After 16% of the status bar the program says "there are no packages for your PC".
    That can't be true, because i haven't installed all drivers and programs.
    I got .NET Framework 4 on my laptop.
    What will solve the problem?
    Greetings from germany
    MAD3000

    i also have the same problem with my B480

  • HT5649 Version 11.1.4 Does Not Work on my system

    I had itunes version 11.1.3.8 and it was working just fine. I believe this version is the 32 bit version.
    itunes sent me version 11.1.4 which is a 64 bit version and it DOES NOT work on my system.
    Some how this important file was deleted. And I keep getting this message.
    The following is the message I get everytime I turn on my computer
    I can close it and my computer works fine except for itunes. I can not get into Itunes at all.
    MSVCR80.dll is missing. Itunes was not installed correctly please reinstall itunes.
    ERROR 7 windows error 126
    How do I remove version 11.1.4 completely and Reinstall version 11.1.3.8
    And do I remove everything to do with APPLE and reinstall.
    I have tried numerous times to uninstall Version 11.1.4 and it is removed but when I
    reinstall it is always Version 11.1.4 I would like Version 11.1.3.8
    Please advise Jeff Beez

    Hello there, Jeff.
    The following Knowledge Base article offers up the instructions on how to resolve the very issue you're describing:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/ts5376
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • My sound system does not work AFTER installing pc to tv wireless connection

    my sound system does not work after installing hp pc to tv wireles device when I am using lap top for other purposes.

    Hi,
    You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
    Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
    one used by the Form contact for Form Invoice.
    Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
    VS General Question forum mainly discusses
    the usage of Visual Studio IDE such as
    WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
    System and Visual Studio Editor.
    Thanks,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • My old MBP (2005) often crashes, freezes or shows grey screen at start up. Also track pad often does not work. I have re fomatted the HD and reinstalled system but to no avail. Genius bar says possible faulty HD, but suspect logic board, any ides any body

    My old 17" MBP (2005) often crashes, freezes or shows grey screen at start up. Also track pad often does not work. I have re fomatted the HD and reinstalled system but to no avail. Genius bar says possible faulty HD, but I suspect logic board. All checks out OK on the Apple Diagnostic bench. Can a Logic board go intermittant?? Any Ideas any body??

    Ive repaired 1000s of laptops over the years (translate: diagnose and replace parts).
    Its not that old, Ive owned 100s of laptops (most were free) ....some I still have are nearly 13 years old and still perfect, ....some extremely expensive ones died in under a year.
    other than becoming obsolete at some point, there isnt really any "will spoil on" data like Milk for solid state computer parts, ....alas.
    You can have a $5000 laptop die in 4 months, and a junker one keep kicking after 10 years.... Ive seen that firsthand countless times.
    Common logic dictates that "very expensive = long life" in computers,..... but all the repair people will tell you just the opposite.
    I know you have a gripe, I get that all too well honestly .

  • TS3989 New MacAir but  photostream does not work.  Message though everything is on. "In order to use Photo Stream, you have to be signed into your iCloud account in System Preferences." And,

    New computer but Photostream does not work.  I am signed into my account but get the following message:  In order to use Photo Stream, you have to be signed into your iCloud account in System Preferences.  I go to system preferences and then get a message that says that my account cannot be accessed.  However, I am using my icloud account for email and other items and it works fine.  Any thoughts?

    Are you getting this messages in iPhoto? If so try the following (again?):
    Log out of iCloud in the System/iCloud preference pane and disable Photo Stream in iPhoto's Photo Share preference pane.  Then log back in and re-enable, respectively.  That should jump start Photo Stream.
    OT

  • "F11 System Recovery" during boot does not work after Cloning hard drive.

    Problem: “F11 System Recovery” during boot does not work after Cloning hard drive.
    HP Envy m6-1125dx UEFI Notebook Computer with GPT hard drive.
    Original Seagate Hard Disk GPT 700GB with Window 8.0_64 upgraded to Windows 8.1_64
    Startup Menu (F11 System Menu works properly) only on original hard drive.
    Following obtained from Disk Management & diskpart in Command Prompt.
                                     GPT Disk <700GB>
    Partition 1 WINRE NTFS Primary 235MB/400MB [Recovery]
    Partition 2 EFI System FAT32 (LBA) Primary 108MB/260MB [System]
    Partition 3 (NONE) Unformatted Primary 128MB/128MB [Reserve]
    Partition 4 Main NTFS Primary 90GB/195GB [Primary “C”]
    Partition 5 (NONE) NTFS Primary 372MB/450MB [Recovery]
    Partition 6 Data NTFS Primary 7GB/475GB [Primary “E”]
    Partition 7 NTFS Primary 26MB/350MB [Recovery]
    Partition 8 Recovery NTFS Primary 24GB/26GB [Recovery “D”]
    I have Cloned the original hard drive to a new HGST 1TB Hard Drive using four different methods (sector by sector):
    Acronis True Image 2015
    Acronis Backup for PC
    AOMEI Backupper Professional
    Macrium Reflect
    Each time the cloning process completes successfully and has the same original partition arrangement. The computer works properly except when trying to use the “F11 System Menu” key during boot. It gives the following error message:
    “Recovery
    Your PC needs to be repaired
    A required device isn’t connected or can’t be accessed.
    Error code: 0xc0000225
    You need to use the recovery tools on your installation media. If you don’t have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer. “
    Any suggestions why the F11 System Recovery does not work during boot and how to fix the problem would be appreciated. I have does various disk checking and file checking on both the original and new hard drive with no errors.
    Thank you in advanced.

    Hi,
    How did you clone the HDD ? One-for-one or different method ?
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I got a iphone 5 but it does not work on my MacBook with Mac OSx 10.5.8  it says i need OSX 10.6.8 but it will not download because I need OSX 10.6 but it would load either. How do I get the older operating system to work with the IPhone5?

    I got a iphone 5 but it does not work on my MacBook with Mac OSx 10.5.8  it says i need OSX 10.6.8 but it will not download because I need OSX 10.6 but it would load either. How do I get the older operating system to work with the IPhone5?

    You don't. Since you have an Intel Mac, buy a Mac OS X 10.6 DVD from the online Apple Store.
    (71894)

  • I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out.  I looked at system settings on trackpad and it is set, but does not work How do I get it started?

    I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out.  I looked at system settings on trackpad and it is set, but does not work How do I get it started?

    This is really unfortunate. I'm sorry that nothing works. I was going to mention holding down the power button and doing a force shutdown but you already did that. You might need to take it into the Apple store. I don't know if booting into safe mode would help. You would have to turn off the machine again, hit the start button and hold down the shift key after you hear the tone, but normally you would let go of the shift key when you see the apple logo and spining wheel. Maybe by holding down the shift key after you here the tone will cause the screen to come back on? The other option is to start up from the 'install disk' if your machine came with one. You would insert the disk, then shut down the computer, and hold down the C key right after hitting the start button.
    Here's the link for the safeboot
    http://support.apple.com/kb/HT1564?viewlocale=nl_nl

  • JDK 1.6_07 with Windows: System.out.flush() does not work...

    I wonder if this is a known issue: Since I upgrade the jdk1.6 version to the _07 pack, text IO does not work anymore with WinXP cmd.exe window. Assuming a static import of System.out, I use:
    static void prompt()
      out.print(pr); //pr is a prompt string...
      out.flush();
    }works as usual with Unix/Linux, but with windows nothing will be written to the terminal, until I make at least one input. In that case a barrage of cached prompts appear all at once.
    Do we have a bug for it, can we work around somehow?
    Thomas

    Since this code works correctly in Java 6u10 on Windows XP
    System.out.print("This is the data");
    System.out.flush();You are apparently doing something unusual or wrong. What is "out"?
    Show a small sample program that compiles and exhibits the problem when executed.

  • Link does not work for-End-of-Sale and End-of-Life Announcement for the Cisco Secure Access Control System 5.4

    Link does not work for
    End-of-Sale and End-of-Life Announcement for the Cisco Secure Access Control System 5.4
    How do we get Cisco to fix?
    see attachment

    Give it a couple of days - it looks like they just sent out the notification before the notice was published on the public page.
    Once the ACS 5.4 EoS/EoL notice is published you should see it linked from this page.

  • Systems preferences does not work

    My Systems Preferences does not work, either reminders and messages... since Mavericks(10.9) Programs do not respond and Macbook air is not responding....  Help.....

    Well, you are certainly correct that the fact that the "wired" machines work sure doesn't rule out a faulty router....But that's why (as part of a process of elimination troubleshooting scheme) I hooked up my old Linksys Router, and got the same results. Now...What are the odds of 2 separate routers acting the same way? Especially when both worked fine on my TIPB and even on my MBP until a few months ago. Plus, my 12 year old son can pull a wireless signal from the router on his console games (xbox360, Wii, PS3) with no problem
    Believe me, my first thought was to go out and buy another router, but when I swapped routers and got the same problem, I began to look elsewhere, eventually coming here for help and knowledge.
    I did the SMC reset to no avail. I'm not sure about the stuff in System Configuration....By "pull" do you mean to delete all the files in this folder? Move them to a temporary folder? Should I just deal with the folders that have "IP" in the "bundle" file name?
    Any help would be greatly appreciated!
    G5 Dual / G4 TiPB / MBP 2.0 / 2.0   Mac OS X (10.4.8)   23" Cinema Display and 8 gig on G5 Dual
    G5 Dual / G4 TiPB / MBP 2.0 / 2.0   Mac OS X (10.4.7)   23" Cinema Display and 8 gig on G5 Dual

Maybe you are looking for