Hibernation mode on Qosmio G50-12Q

Good Morning
In the Qosmio G50 - 12Q, after to have selected " Put in Hibernation " in order to make that it enters in function it is necessary to press key OFF of the pc ?
Because selecting simply " Put in Hibernation " the current - feeding not come removed
Tank you

Hi valkyrie,
I didnt understand your question but you can use hibernation mode when you press FN+F4 key combination or choose hibernation from Windows start menu.
After this the computer will automatically go to hibernation mode and then you can close the lid if you want.
If you close the lid, the notebook will start when you open the lid or you press power button. ;)

Similar Messages

Qosmio G50-12q - Vista does not load after connecting external USB keyboard

I have acquired a keyboard enermax acrilux usb and have connected the taken keyboard to the qosmio g50 12q at the same one where an other keyboard was attacked usb and that it worked without problems.
After to start the PC with keyboard eneramx connected the qosmio has not loaded windows vista ultimate and the inner impellers have been activated.
Never happened previously. I have doubted of the enermax
Reconnected to taken usb the mail of the qosmio it has on the back not given to problems of start of impellers
As the enermax it never has blocked the start of the system operating and put in function the impellers also having connected it to the same one taken usb to which precedence was connected one keyboard ?
Tank you

Hi mate
Sorry but you message I really hard to understand
What I understand is that you connected an external keyboard to the Qosmio and now the notebook does not boot up correctly. Is it right?
What to say; maybe you should disable the USB legacy mode in BIOS.
Please check this!
To get into the BIOS press F2 and while powering up the notebook.

Qosmio G50-12Q: Recording TV programs to DVD video using Win Media Centre

Good Morning
I have a Qosmio G50-12Q that it introduces this problem:
When I want to masterize or burn a program recorded of the terrestrial TV with the Qosmio on DVD - video it come outside this message MEDIA CENTER EXTENSIBILITY HOST HAS STOPPED TO WORK " and the Media Center program comes closed .
If the program TV the registry choosing whit option " DVD dates " records given it normally but it does not come read from other player DVD, because is not recorded in the format video
While if the masterize choosing option DVD video comes the error message over saying.
Does this happen to someone else?
What could be the problem?
Thank you for your reply.

Someone knows to say reading in the detail the error list to me please what e' opportune to make
Media Center Extensibility Host
Problem
Stopped working
Firma del problema
Nome evento problema CLR20r3
Firma problema 01 : ehexthost.exe
Firma problema 02 : 6.0.6002.18005
Firma problema 03 : 49e01113
Firma problema 04 : SonicMCEBurnEngine
Firma problema 05 : 6.0.6000.0
Firma problema 06 : 4549bdd6
Firma problema 07 : 3d
Firma problema 08 : a9
Firma problema 09 : System.InvalidCastException
Versione SO : 6.0.6002.2.2.0.256.1
ID Impostazioni Locali : 1040
Ulteriori Informazioni sul Problema
ID bucket : 580277127

How to enter BIOS on Qosmio G50-12Q?

Good Morning
I have a PC Qosmio G50-12Q - OS is Window Vista 32 bit
How I make to enter in the BIOS of the system ?
Which are the keys to press ?
Tank you

Hello
I asked a friend of me because he has Qosmio G50 and you have to press F2 key to enter BIOS setup.
By the way: If you press F12 you can select the boot device. Therefore its not necessary to enter the BIOS. :)

Qosmio G50-12Q - Screen saver doesnt work if I use wireless mouse

I have a Toshiba Qosmio G50-12Q
If you use a wireless mouse does not work the screen saver.
If I disable the mouse instead of the screen saver runs regularly.
There is some way to run the screen saver also using a wireless mouse?
Tank you

> The screen saver is one program downloaded from internet.
Well, in such case it can be a software bug too.
To be honest I dont see any connection to Toshiba here it seems to be an 3rd party software which does not start up when WLan mouse in connected maybe the screen saver developer could provide more details here

Qosmio G50-12Q: No audio while moving video files from camcorder

Good Morning
I have a portable PC Toshiba Qosmio G50-12Q with 640GB of HDD and 4GB Ram equipped with seen the Window system Completed modernized to service version pack 2
I connected the video camera Sony PC 115 to the PC through the I.Link IEEE 1394 cable while that I am importing a determined video to the Window Movie Maker in order to record it.
At this moment in which it comes reproduced in the screen of Movie Maker I see the reproduced video from the video camera but do not feel the audio. When then I have ended to import the video I go and it always see again in Movie Maker, the program regularly reproduces or the video that it has recorded or the audio that exactly I did not feel it was importing while it.
It' is to regular ?
Task that in phase of import I would have to feel and to see or that video audio. Not task that is the defective cable because when I see the recording of the video in Movie Maker I feel also the audio base, wants to say that the audio has exited from the video camera, entered in the PC through taken I.Link has recorded that it.
To the aim i can hear the audio in phase of transfer / import from video camera or any other audio apparatus / video I must for case to modify inside of Window Movie Maker or in Seen Window some formulation detail that it regards also the taken I.Link specifically ?
Or the cable goes connected between video camera and PC with details sagacities? Even if me it seems to have connected well it perche' as I repeat l' audio comes recorded.
Thanks and salutes

I have Sony camcorder DCR-TRV520E to and in the past I have recorded several movies on my notebook.
I have used Ulead Movie studio application and everything was OK.
10 minutes ago I tested it with Windows Movie Maker (Vista) too. Here some facts:
- My Sony cam was recognized properly
- Started Windows Movie Maker and chosen option IMPORT > From digital video camera
- Browsed into right folder
- On next step from alone application started rewinding videotape
- Importing video started from alone and when finished I checked it and sound was there.
Later I chosen option "Publish to" > This computer and after 20 minutes everything was finished.
I use simply firewire cable. Nothing special.
I really don't understand what is wrong there.
Is this first time you do this?

Qosmio G50-12Q - Integrated recorder issue

Good Morning
I have Toshiba Qosmio G50-12Q, with Window Vista Ultimate 32 bit with integrated masterizze Teac. Every time that I try to masterize a cd or dvd the system says to me that does not find the masterizze.
In management dispositive it perfectly turns out installed and that it works correctly. Which could is the cause of this continuous not acknowledgment of the masterizze ?
Every time I must reestart the system newly
Thank you for your reply

Hi
I dont understand you too
Please post clearly what problems you have with the Qosmio G50 notebook.
I read something about CD/DVD drive (Teac) and masterizze what do you mean by masterizze?
Secondly; as far as I know this Qosmio notebook was equipped with Panasonic (UJ-841) DVD-SUPER-MULTI (+-R DL) drive I didnt find any info about Teac

Qosmio G50-12Q: How to disassemble keyboard key?

Where I can find of the relative photos to the disassembling of the keys of the keyboard of Qosmio g50 ?

Is possible to remove the single keys and in some sites in it Usa and France I have been able to see that they sell also the single keys of several models of PC
I have since there are photo in Internet on like taking apart the qosmio g50 but in particular of the keys of the keyboard I have not found no type of photo

Qosmio G50-12q - How to setup devices connected to USB in standby

Good Morning
I wanted to use the function of stand by of the PC.
I wanted also that the peripheral ones were extinguished once in stand by.
Once set up this function the PC goes regularly in stand by but the peripheral ones connected through usb remain ignited, additional masterize type, a peripheral one usb wi.fi, etc
Someone has said to me that perhaps some functions in the Bios are not set up in order to make that once entered in stand by the PC extinguish also all the peripheral ones connected.
Which verifications and configuration I must carry out in the bios of the PC?
How us within in the bios? Pressing which keys?
Thanks for

*@ valkyrie*
Please post some feedback if the workaround posted by Akuma helped!
This would be really appreciated.

Qosmio G50-12Q - AC IN LED will flash orange

The PC and 'connected via the power supply current and when I turn the pc off by the button on the LED starts flashing orange on the PC AC IN. I state that the PC and 'turned off for a week and there are no problems of overheating. Although the detachment from PC Power Supply LED continues to blink orange.
I tried to remove the battery and reinsert it. Uil LED has stopped flashing and pressing the button on the PC is off and on again but 'every time I have to remove and replace the battery for por ensure that the PC comes on a regular basis by the on off button.
From what can 'depend. a battery problem because if I remove and reinsert stops blinking and lights up again?

Usually the DC-IN led does not blink if everything is OK.
If the DC-IN start flashing orenage then this indicates a problem with the power supply.
You should initially try to plugging the AC adaptor into another power outlet to check if the same would appear. If it still does not operate properly, then you should contact your reseller or the Toshiba ASP.
PS: if the power indicator flashes orange then this means that the notebook is in sleep mode

Qosmio G50 802.11n activated but didn't work correctly

Hi
I get a new Qosmio G50 on christmas and now I have a little problem. I use a D-link draft-N access point and I want to use the 802.11n mode with my qosmio. But I have some problems with it. I activated the 802.11n mode in the device manager and channelbandwidth band 2.4 & 5.2 are both set on "auto"!! But I dont get the 300mbps, 60mbps is the most what I get. My father has a notebook from an other manufacture with also a 802.11n wireless card but not from Intel and with the other notebook I get the 300mbps! I can put the notebooks together in the same room, the other get 300mbps the qosmio fluctuates from 1 to 81mbps or so.
Do anybody know whats going wrong or do I have to change something at the device manager?? I heard that many other intel wifi 5100 owners also dont get the 300mbps speed.
can anybody help me??
greetz

Have you tried turning off 802.11g/b/a modes by setting it to "802.11n Only"?
Go to the Wireless LAN device settings in Device Manager to change these settings.
Remember that 300Mpbs is the signal speed. Actual data transfer speed (minus the overhead) is less than 100Mbps

Qosmio G50 won't finalize Windows 7 64-bit install

Hi everyone!
I recently wanted to updated my Qosmio G50-12f from vista 32bit to 7 ultimate 64bit. I did a clean install: formatted the c partition.
Everything seemed to work fine until the "setup is preparing your computer for first use" screen. At first I thought it just froze as it wouldn't go any further. Rebooting (in any modes) would get the same effect.
But to my great surprise and pleasure, it managed to pass that point when i desperately decided to wait long enough for a miracle to happen. But the problems still remain. The configuration process is just !REALLY! slow. I could painfully pass the firsts few screens, like enter computer's name, activation screen, security modes, but with a very long waiting time between each. And everytime it reaches this last security modes screen it would suddenly go to a BSOD:
Driver Power State Failure
* * * stop 0x0000009F (0x0000000000000003, 0xFFFFFA800193DD70, 0xFFFFF80000B9C518, 0xFFFFFA80029C8610)
Please anyone has any ideas about how to solve this?
Obviously it should be a driver problem, but how do i get to update any drivers without an OS running? I've seen such a feature in the repair section of the install DVD but it only accepts .inf files.
And I can t find those anywhere on toshiba's support website. Only .exe that you run from your already running OS.
Anyway the Qosmio G50 was not listed as incompatible with 7-64bit. So i'm a bit confused here!
Please Help^^

Hi
Fact is that notebooks are different from desktop PCs and many newer notebooks series are equipped with newer motherboards and controllers which need an additional driver.
The G50 needs an SATA driver in order to install the Windows OS.
The SATA driver should be a part of the Intel Matrix Storage Manager.
Some words regarding the ISO image.
Who knows what ISO image it is seem you are trying to install an image which was created on different computer this could be a problem on notebooks with different hardware configuration
You should use either the Toshiba Recovery disk or the clean Microsoft Windows CD!

Qosmio G50-129 PQG55E - 64Bit Windows 7 Upgraded - How To Update BIOS?

Hello,
I have a Qosmio G50 that I have upgraded to Windows 7 64bit. My BIOS is unupdated from 6 months ago when I bought the machine.
I went to update the BIOS just to keep things up to date, so I went through the online driver wizard:
http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp
And with all the above information inputted, it provides:
http://support1.toshiba-tro.de/tedd-files2/0/bios-20090312131718.zip
After unzipping and running P0060v210.exe, it extracts and then says:
" [Error] BIOS Update is not supported OS. Unsupported OS or service pack is installed. " (Word up to all my Googling friends!) "
Does Toshiba have a BIOS update for the Qosmio G50 that is supported on Windows 7? Specifically 64bit? They should fix this glitch that directs you to download this file when it clearly isn't supported by Windows 7.
Also, I tried to run it in compatibility mode with Windows XP SP2 and it ran fine -- but I was nervous about going through with the update if it originally doesn't support Windows 7, so I don't continue at the next prompt. Is it safe to do this? Has anyone else in this situation done it without issues? I've read that BIOS updates can go horribly wrong if not careful, so I'm hesitant to update the BIOS by running the updater in compatibility mode when it doesnt support Windows 7 on its own!
Thanks in advance for any assistance and Merry Xmas.

Hi All,
Sorry ,my English is not perfect.I have a Toshiba Qosmio G50-12K.The solution is go to the US Toshiba website.Here is the link:
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=2140527& rpn=PQG55U&modelFilter=G55-Q805&selCategory=3&selFamily=804517
There are all of the BIOS what is available. The 2.1 BIOS exactly the same as on the European website just they used a zip file. If you guys open it you will find the same .exe file, the file size is the same, but don't use this one, instead of it you can find there an ISO file. Write a CD with this one, turn off the computer and boot from the CD, use the F12 button. This is a safety way update the BIOS. But I use the 2.3, this is newest one, for me this one is works much better, because the display is more bright. I hope this is a big help for you and you understand my English! :)
Kornel

Cannot write anything to discs using Nero 2014 on Qosmio G50

HI THERE,
I am having trouble burning things to disc ?
I have no idea why, as a few months ago i had no troubles.
I have recently done a complete re install of my Qosmio, changing the OP from 32 bit to 64 bit.
I have convert x to dvd but will not burn using it, and i have nero 2014 but again, i cannot burn anything .
Would appreciate any help ......
thank you.....

> i went into toshiba qosmio G50 drivers downloads page and clicked on the firmware update for TEAC . and after opening the download and starting it , it tells me that there is no DV-W28S-R drive found ?????
This firmware update has been released for
TEAC DVD Super Multi Drive (DV-W28S-RT3, DV-W28S-RT4): Version 7.0D and
TEAC DVD Super Multi Drive(DV-W28S-RT1): Version 7.1D
On the driver page (under More Info) you can find details about this update:
_+Changes+_
+- Fixed the issue that the ODD is not recognized if the system is booted from a certain CD in SATA AHCI mode.+
This means that this update does not fix any data writing issues! Furthermore it has been published only for DV- DV-W28S-RT1, W28S-RT3, DV-W28S-RT4 model drives.
Back to you disk writing issue:
Try to delete the upper and lower filter following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
Details here:
http://support.microsoft.com/kb/929461
http://support.microsoft.com/kb/314060

Problem installing XP on Qosmio G50 with preinstalled vista

Hello everyone, just joined, and after some browsing I believe 'll like this place.
I just bought a Qosmio G50 10 with preinstalled Vista and I would like to install XP on the second hard drive to have double-boot. It starts well but after it finishes loading drivers etc it says "starting windows" and then I get a blue screen.
I know the installation CD is good. This portable is new on the market and there isn't much info about it.
Even Toshiba does not seem to have drivers for it to download.
Reading here and elsewhere shows that a driver problem might be the cause, but I need help.
Thanks.

The BSOD is because XP doesn't have a driver for your hard disk, so it panics because it can't find the hard drive.
I also had this problem, following the steps at http://www.msfn.org/board/lofiversion/index.php/t124213.html solved it.
Basically, here is what you have to do:
1. Get a copy of Win XP with SP2 to get the SATA support. Note that it _does not_ have drivers for your HD, so this by itself is not enough!
2. Get the Intel Matrix Manager "F6" drivers from Intel website ( http://downloadcenter.intel.com/Filter_Results.aspx?strOSs=All&strTypes=All&Produc tID=2101&OSFullName=All%20Operating%20Systems&lang =eng - be sure to pick the F6 Floppy Driver package that matches your 32- or 64-bit XP ).
3. Download a copy of nLite to use to make a custom Windows XP Install CD
4. Copy your WinXP CD (all the files) to some folder on your HD.
5. Unzip the Intel Drivers.
6. Run nLite, pointing it at the folder you created in step 4. Choose only the options to add drivers and to create an ISO image. For the add drivers, use the multi-driver folder option and point it at your unzipped Intel drivers folder from step 5. You want the "text mode" driver - pick the one that matches your controller (ICH9M-E/M SATA AHCI).
7. When you get to the disk image page, DON'T try to use nLite to burn the CD. Have it create an image (.iso). nLite always locked up for me if I tried to use it to burn CD.
8. Find your .iso in explorer, right click and do Send To menu to bring up the TOSHIBA burn image to CD. Use that to burn it.
This will get you an XP SP2 CD that will successfully install on your G50. At least, it did for me, using the Vista 64 environment that came loaded with the laptop. You will also need to go into BIOS (er, Hardware Setup) by holding down ESC when you power on the laptop. On the first page, on the right hand side, change the boot order to one of the options that list CD-ROM first. Otherwise the laptop will happily ignore your shiny new install CD.
Hope that helps!

Hibernation mode on Qosmio G50-12Q

Similar Messages

Maybe you are looking for