Hibernation not working correctly and ThinkVantage connection problem

Hi -
I searched this but couldn't find my problem. I'm sure it's out there but didn't see it.
My computer will not go into hibernation on its own. I have it set to go off after 1hr not on battery. I don't have a mouse hooked up to it or any other external device. Does anyone know why this is. It will not go into standby mode either. The only feature that works is shutting my LCD off.
If anyone has a solution please let me know.
Also, I would like to get rid of my ThinkVantage connection manager. Is there a way to make it go away without uninstalling? I would rather use Microsoft's manager instead.
Thank you,
Lenovo T500 - Windows XP Professional

For the wireless connectivity...
Having two wireless clients both trying to control the card usually causes problems. My suggestion:
1. Use Access Connections, but create the WZC (Windows Zero Config) profile within Access Connections by using "Use Windows to configure wireless" under the wireless security type. Be sure before you do this, that and previously existing profiles under WZC that you created and gone. (So basically have to recreate the profiles and new ones under Access Connections)
or
2. Uninstall Access Connections and use WZC exclusively. Trying to use WZC to manage wireless with Access Connections installed will just cause problems (disconnects, etc...)

Similar Messages

I bought an IPAD air from state and the screen is not working correctly and right now i'm in Egypt ,can i send my ipad to service in Egypt and the warranty will work in Egypt or what?

i bought an IPAD air (32 gb wifi only) from USA just one month ago and the screen is not working correctly(picture attached) and right now i'm in Egypt ,can i send my ipad to service in Egypt and the warranty will work in Egypt or what?

Have you tried a soft-reset to see if that fixes it ? You might be able to get warranty service in Egypt for your iPad, but the warranty includes :
IMPORTANT RESTRICTION FOR iPHONE AND iPAD SERVICE.
Apple may restrict warranty service for iPhone and iPad to the country where Apple or its Authorized Distributors originally sold the device.
As it's wifi-only you should have a better chance of it being serviced under warranty, but there are no guarantees, it might depend upon the repairer.
Egypt authorised service providers : https://locate.apple.com/eg/en/

My trackpad was not working correctly and now when i use a mouse it wont work eather.

I have a Mac Book Pro 13" and for months now my track pad was acting up. When i was watching youtube it would randomly pause and zoom in and other things like that. I am going away and me and my sister have to share it and because her computer is fine and she isn't bring it she will have a very very hard time using it. I used to just ignore it but not it is becoming a big problem and I can't bring it to the apple store because we are leaving tomorrow and have no time at all. I herd it might have something to do with the disk or battery or the trackpad? How do I fix this problem?

go on system preffrences and trackpad and all the settings their avan in the other taps turn them all on with a tick (just click the box)

Keyboard problems, not working keys and different connection with letters

PLEASE HELP ME, The background is this: Yesterday I have done for the first time the time machine with my external hardisk, and I try to delete also all remains documents of windows from virtual machine Parallel (I delete it after trial version and I still have windows data in the mac).
(I dont know if is connected to the problem)
After this, this morning the keyboard start to work bad, some keys don't work, like ENTER or P or Volume Buttons, but the strange thing is that some other work differently, like pushing the left arrow it type "à".
I try to change Mac, in order to understand if is a software problem, but nothing, it didnt work also on different computer.
It's not a keyboard lenguage problem as you can think, I changed, lenguage, and nothing, in fact this does not explain why some keys dont work,
In the keyboard visor, I can see which key works and which not, and some like, down arrow, is perennially insert, and furthermore, up volume work as backspace.
So, a series of strange problems.
-keys that dont work
-wrong connection (key-letters)
-and keys always "ON"
I'm sure that no liquid went on the keyboard, and the keyboard is new, (less than 6 month, bought at Apple store)

Ok, I try again, and I followed perfectly the process, the "UTILITY DISC PAGE" was due to the fact that the "P" button doesnt work, therefore, it get just option+cmd+R
Oh, really this is very strange. I try this keyboard on an other mac and it didnt work (it fail the configuration process because the "ENTER KEY" doesnt work)
I try also a USB keyboard on my mac and it was all OK.
So, it seems to be a software problem of my bt keyboard, there isnt a way to reset? I'm worry about match again the bt because it will ask me to type numbers and then ENTER and if the keyboard will not be fixed, Im without keyboard... now I can use it and when I need some key that dont work, I use the virtual keyboard.
Guys, what do you suggest to do? The keyboard is in warranty but the bill is in Italy, now I'm in UK, the apple store could replace it without the bill?

Why is the Up to date program not working correctly and letting me download Lion when I have a qualifying system?

The Apple online store doesn't seem to recognize my serial number or says it is not correct? What is going on with this???

Well I finally figured out why my serial wasn't working. Apparently it was because my system was customised as opposed to off the rack, not sure why this should be a problem though.
Anyway, I used the old paper and fax method and have received confirmation that it is on it's way. If you haven't received confirmation I'd recommend chasing Apple to find out where it is.

Business Contact Manager 2013 Issue with drop down menus not working correctly and BCM disappearing.

We upgraded from BCM 2007 to BCM 2013. Now the BCM disappears from Outlook occasionally and the drop down menus are confused. for instance when accessing the drop down for phone numbers, the user selects company - but the field for TTY/TDD comes up.
Shows fields that don't exist etc.
The client is using Office 2013 Pro Premium from Office 365 Small Business Premium subscription and BCM downloaded from Microsoft website.
Please let me know what the support avenues are for this product.
Chris Smith

Hi,
This issue may be caused since the BCM was not installed properly.
Please go to Control Panel -> Programs and Features, find Business Contact Manager for Microsoft Outlook and Uninstall it.
Then go to
http://www.microsoft.com/en-us/download/details.aspx?id=36513, download the right version of BCM(32bit or 64bit) and install it.
If issue persists, you may provide the screenshots of the issue, post them to SkyDrive and share it via a link:https://skydrive.live.com/, then we will have a better understanding on the issue.
Thanks,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

I have an iPhone 4 on contract and its not working correctly , what should I do ?

I have an iPhone 4 on contract , I only have this 5 and a half months and the iPhone is not working correctly and i do not have insurance .. What should I do ??

It sounds like you did not purchase it at the Apple store? That doesn't matter - you can still take it to Apple to troubleshoot it.
You can also try to troubleshoot it with the help of the folks here - if you want to do that, let me know and I'll ask that your post be moved to the iPhone forum where you're more likely to get knowledgeable answers, ok.

Line-in input not working correctly in Garageband

Problem:
Line-in input not working correctly with Garageband. Problem occurred AFTER installing and using Blue Yeti USB mic, purchased from the Apple store.
System Details:
'07 20" iMac 2.4GHz 4GB RAM, OSX 10.6.5, Garageband '11 v6.0, Logitech Z4 speakers.
Background:
Before using the Yeti USB mic, I used the line-in jack. I'd connect a Shure mic or guitars directly in, but more recently through a 12 channel mixer. Have connected the Shure mic directly into the input jack, and the computer appears to be picking it up (System Preferences->Sound->Input), it is responding correctly there. Have set the output to the headphone (line-out) jack. When I go into Garageband, I can select from Line-in 1, Line-in 2, and Line-in Stereo. The trouble is that it's the iMac's built-in mic that is active (the one above the screen), not the line-in. I've rebooted the computer, checked the connections, reconnected the Yeti mic and I can't find what's causing the problem. Not sure what to do from here, need some help. Thanks

I have Logic Express on the iMac as well and I worked out how to set the input device back to the Line-In. I went back to Garageband and found the equivalent setting under Preferences->Audio/MIDI. Thanks for reading, sorry I didn't sort it out sooner! Merry Christmas!

ITunes not Working Correctly

When I use iTunes without connecting my iPhone, it seems OK. When I connect the iPhone, after the sync has been performed, I get a message that my iTunes is not working correctly and has to be closed. Is anyone else having this problem or know how to address it.
Thanks.

Thanks. Before I saw your reply, I shut down my iPhone fully, restarted it (I had to reset the defaults) and reconnected. The problem did not reoccur. It also seemed to correct a problem I was having the "weather" function on my iPhone. Thanks again.

External usb sound card is not working correctly

When my computer usb sound card is working correctly. If your computer to sleep and wake up the sound card is working correctly. If you disable the sound card and connect again, it appears extraneous sound on the background music playing. Each time the sound is different. The sound is very similar to not match the sampling frequency. If the computer is rebooted, then the sound card is working properly again.
Soundcard Infra-sonic.com model Amon.
I have not experienced problems when using the same card with Mac OS 10.5.8 with the drivers for Mac OS 10.5
Manufacturer issued driver for Snow Leopard, but the card still does not work correctly.
Also such problems, other users complain about an external USB audio card. None of the users can not find a solution to this problem.

Contact Infra-Sonic tech support.

1st Gen iPod touch not working correctly?

I have a 1st generation 8GB iPod Touch. It's not working correctly.
My biggest problem is that, unexplaiably, certain areas of the screen don't seem to register touch anymore. There is a sort of "L" shape on the left and bottom edges of the screen that won't register touch, making it impossible to move applications to the previous page on the home screen and making it hard to use the keyboard/buttons while in portrait mode. It's extremely frustrating to try to change the volume while playing a song, as I now have to either put the iPod in sleep mode then double tap the home button or flip it to cover flow and double tap the home button to do it.
http://i38.photobucket.com/albums/e140/Vipershark/IMG_0001.png
(Highlight the image to see it better.)
This is a screenshot of the working/non-working areas that I made using the Whiteboard application. The white area that you see (excluding the little half circles of black which are extended brush strokes and not actually working areas) is the area that doesn't work. I can't seem to figure out why it happened, as I've never dropped or otherwise damaged it. It just happened one day, and I don't know why.
But I can't fix it. I've tried everything. Upgrading (I'm now running iPhone OS 3.0 which still didn't fix the problem.) didn't work, restoring didn't work, deleting everything and restoring from factory settings didn't work.
I'm also having a few other problems as well, though they're not as bad. My home button seems to stop working sometimes and sometimes the entire screen witll stop registering touch until I put the iPod to sleep and turn it back on. It also seems to go a lot slower than usual.
My iPod is less than a year old. Can you help?

Vipershark,
I had a very similar problem this past weekend with my 1G 8GB iPod touch. But with me, just the left side of the screen wasn't registering my touch. I could still access the bottom section, which you cannot.
The good news for me is that I fixed it and I hope it works for you as well. What fixed it for me was resetting all my settings. To do this, go to the settings icon, then click on general, and then on the very bottom is reset. Choose "reset all settings."
Apparently this is different than a restore through iTunes, which you tried. I also tried that earlier and it did not help.
Of course, the reset solution I used relies on you being able to access all of the correct buttons, so I hope you can!
Please let us know if this works for you. If not, since it is less than a year old, it is still under warranty. Contact Apple and see what they can do.

Trust computer does not work correctly

http://support.apple.com/kb/HT5868 - this is the thing that makes me NOT continue using Apple products anymore. The feature does not work correctly and I am SICK of reinstalling drivers, turning on/off apple mobile service to get access to my files. I ask for a premanent fix OR REMOVE THIS CRAPPY feature you have put in !!!! You care about your customer satisfaction, am I correct ? Then I do expect an answer ( read this as permanent solution ) to this issue.
I have been connecting to the very same PC for months. And it asks me to trust it every time, which does not work at all.
iOS 7.0.4

Dan, they never responded to this. And now you are telling me this is still going on with iP6 on iOS8. God, Apple started to really suck in some aspects. I have the phone, have unlocked it and have access to all apps and settings on it, even those photo/video files from the device itself! And I still need to give permission to the computer from the phone, just so I can access them on it?!? Seriously what the **** is with that feature and why does it not work correctly for us? Still the same on my current iP5 , iOS 7.1.2

My bridge is not working normally and keep given me this message : bridge encountered a problem and is unable to read the cache . Please try purging the central cache in cache preferences to correct the situation

My bridge is not working normally and keep given me this message : bridge encountered a problem and is unable to read the cache . Please try purging the central cache in cache preferences to correct the situation

And did you then actually purge the cache?
Please realize that you have given ZERO details.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

HT2216 I am on OSX 10.7.5 and recently had to reinstall it due to 'mail' not working correctly. That problem was resolved but now my I can't use the 'right click' function on the apple usb mouse. Any clues?

I am on OSX 10.7.5 and recently had to reinstall it due to 'mail' not working correctly. That problem was resolved but now my I can't use the 'right click' function on the apple usb mouse. I only have a previous version re-install disc as I bought the latest OSX off the app store. Any help gratefully received?

Hmmm, no, no drivers needed, now it sounds like a bad install... unless you might have some old Mouse software installed???
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

I have the iPad 2 16GB, bought it in August 2011, I worked perfectly but in mid-August 2012 I took her to the store because the microphone did not work reviewed and changed me, but to my surprise that the new iPad had the problem is disconnected WIFI sign

I have the iPad 2 16GB, bought it in August 2011, I worked perfectly but in mid-August 2012 I took her to the store because the microphone did not work reviewed and changed me, but to my surprise that the new iPad had the problem is disconnected WIFI signal I have to be glued to the router, and I did everything he says is supported by the Apple and all other pages and forums regarding this problem is not solved and always disconnects when connected always disconnects again!! passing will be settled as no longer factory warranty although it has neither the three months I renewed new, please help because the investment has been great and I can not use only as "a mirror" I'm waiting a true solution, thanks ....
Sincerely,
Catlos

This does help me because I am pondering on wether to buy an airport extreme to solve my ipad 2 connection woes. I have an extremely old router dLink 524....but I have NEVER had any problems with it at all ever. My xbox connected great to it and netflix ran flawless through my xbox.....now I have an ipad2 and an apple tv and they are BOTH having horrible connection problems. I have read most of the forums on how to fix it by changing the settings on my router but since mine is so old I couldn't do some of the suggested solutions. So here I am debating on whether to spend all this $ on an airport extreme? I am just hoping that if I go and purchase this, my connectivity issues problems will go away like yours did. Just wondering if you have ATV as well and if the AE solved its problems? I have read about AE solving ipad2 wifi problems, I'm just hoping it will solve my ATV as well.
**Glad they didn't "moderate into extinction" your post yet, lol, Thank

Hibernation not working correctly and ThinkVantage connection problem

Similar Messages

Maybe you are looking for