Hic, help me ! thanks. get version file AI, EPS by C

i have file .ai and .eps ,
MyApp used C# , i want get version file ... help....
the same get version indesign : Re: [Ann] Identify Your InDesign File by Tony722

You are running jrockit (BEA JRockit(R) R27.6.5-32_o-121899-1.6.0_14-20091001-2113-linux-x86_64), but you have
some Sun JVM parameters
-XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=128m
These are ignored by jrockit, but should not be in your start script.
Maybe this could be causing the issue
-agentlib:jprofilerti=port=8849,nowait,id=107,config=/opt/jprofiler5/config/config.xml -Xbootclasspath/a:/opt/jprofiler5/bin/agent.jar
If you want to profile your environment and you are using jrockit, you can use jrockit mission control:
http://download.oracle.com/docs/cd/E15289_01/index.htm

Similar Messages

Help Needed! Getting the files off the recovery disc and onto the computer. How?!?

Okay, I shut down my computer a few hours ago like normal and I restarted it again when I wanted to go on it which was later this evening. A screen popped up that said press enter to continue and a bunch of code, so I did just pressed 'Enter' like it asked. Then another screen came up that said, "Your computer could not start up, we are finding and fixing the problems, ect ect." And then there was a percentage at the bottom of how much was completed.
So after it was finished, my computer started to totally restart, like I just bought the computer. It had me remake everything. And when it was all done EVERYTHING except for the programs that came with the computer where gone. I noticed a recovery disc and how it was almost full, and it said it has all my programs on it and to not delete it. Well okay if it has all my programs....
How in the world do I get everything from the recovery disc back onto my computer?
Please comment on any information that can help!

The recovery partition on the hard drive does not have your programs/files. It holds the files to reinstall Windows and all original software/drivers that came on the laptop. In other words, it does exactly what just occurred.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Need help! Issue getting TempDB files removed

I'm currently running SQL 2012 and having some issues altering the TempDB to remove two additional mdf data files from the filegroup.
The tempdb currently has two additional mdf data files, tempdev1, tempdev2
I'm running the following command
ALTER DATABASE tempdb
REMOVE FILE tempdev2
And while I expect to see the message
Msg 5042, Level 16, State 1, Line
1
The file ‘tempdev2′ cannot
be removed because it is not empty.
I am NOT seeing anything to the likes
below...which concerns me as I don't think i'm ready to restart my instance and have the desired changes in play
The file “D:\tempdb\tempdev2.mdf”
has been modified in the systemcatalog. The
new path will
be used the next time the database isstarted.

It seems some activities are going on that is using your TempDB.
Restart the SQL services this will create your new Tempdb & all files become clear. After that run your both commands, It should work.
USE tempdb;
GO
DBCC SHRINKFILE('tempdev1', EMPTYFILE)
GO
USE master;
GO
ALTER DATABASE tempdb
REMOVE FILE tempdev1;
Just to add, only 1 mdf can have per database, rest of this all other data files will be ndf.
Regards,
Rohit Garg
(My Blog)
This posting is provided with no warranties and confers no rights.
Please remember to click Mark as Answerand
Vote as Helpfulon posts that help you. This can be beneficial to other community members reading the thread.

I am getting a message that my iphoto library cannot be opened because I mades changes to my photos in a newer version of iphoto and I need to quit and use the newest version of iPhoto. but i cannot update it and or access my photos. Help. thanks.

I am getting a message that my iphoto library cannot be opened because I mades changes to my photos in a newer version of iphoto and I need to quit and use the newest version of iPhoto. but in update, it says i have no updates. i dont even remember making changes in iphoto.Help. thanks.

What version of iPhoto? Assuming 09 or later...
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Hi, photoshop crashed and the file I was previously working in on the same version says Could not complete your request because the file is not compatible with this version of Photoshop. I'll appreciate any help. Thank you.

hi, photoshop crashed and the file I was previously working in, on the same version of Photoshop says "Could not complete your request because the file is not compatible with this version of Photoshop." I'll appreciate any help. Thank you.

CR2 files from which Canon camera?
Supported cameras are listed here
Camera Raw plug-in | Supported cameras

WHAT SHOULD I DO MORE TO GET MY FILES BACK IN THE FCP FORMAT ?

A ROUND-ABOUT PROBLEM
RECENTLY I GRADUATED FROM. FCE AND FCE HD. I DECIDED TO INSTALL FCP 5. I HAVE POWER BOOK G4 V10.4.8, PROCESSOR 1.5 GHZ PC SDRAM WITH INTERNAL MEM 80 DISK STORAGE AND 1 GB DDR SDRAM. I ALSO HAVE AN EXTERNAL LaCIE WITH 200 CAPACITY.
IN THE PROCESS OF INSTALLING FCP, THE STUPID THING I DID WAS TO CHANGE NAME OF THE MEDIA FILE, AND THIS ACTION CAUSED ALL MY FILES GO OFFLINE. THE OPTIONS GIVEN TO ME BY THE RECONNECT FILLES TABLE BOX TO GET BACK MY FILES ARE:I TRIED TO USE BOTH BUT WITH NO SUCCESS.
I WOULD BE GRATGEFUL TO ANY ONES WHO COULD HELP ME RECOVER MY FILES WITHOUT GOING INTO THE PAIN OF CAPTURING THEM FROM TAPE.
FOR THOSE OF YOU WHO HAVE THE PATIENCE PLEASE READ MOR BELOW. THANK YOU SO MUCH.
WHEN I TRY I GET A WARNING WHICH SAYS:
THE FILE FORMAT OF THIS PROJECT IS FROM AN EARLIER VERSION. WOULD YOU LIKE TO UPDATE THIS PROJECT?
NOTE: ONCE SAVED, THIS FILE CANNOT BE OPENED BY PREVIOUS VERSION. TO AVOID OVERWRITING THE ORIGINAL PROJECT FILE , YOU CAN CHOOSE SAVE PROJECT AS FROM THE FILE MENU WHEN PROJECT UPDATING IS COMPLET
WHEN I SAY YES, ANOTHER BOX APPEARS: UPDATE PROJECT. IT SAYS THE FOLLOWING:
THIS PROJECT CONTAINS ONE OR MORE SEQUENCES WHICH THIS VERSION OF FINAL PRODUCT PRO CAN RENDER WITH MOTION TAP QUALITY(NAMELY SCALIBG, ROTATION, ETC). PLEASE CHOSE A SCALING QUALITY TO USE (“FASTEST” RECOMMENDED IS THE QUALITY LEVEL 4.5.
NEW QUALIT Y CHICKED INSIDE THE BOX ARE: BEST, NORMAL, FASTEST OR LINEAR . THE UNCHECKED LITTLE BOX READS: REMOVE EXISTING FILES (THIS ACTION IN NOT UNDOABLE
WHEN I PRESS OK “OFFLINE FILES” BOX APPEARS AND SAYS:
SOME OF THE MEDIA OF YOUR PROJECT REFERENCES EITHER CHANGED, MOVED, OR GONE AWAY.YOU CAN EITHER RECONNECT THESE FILES , OR CONTINUE WITH THEM BEING OFFLINE. BELOW THIS SAYS AS FOLLOWS:
FORGET FILES. BELOW THAT THERE IS AN UNCHED BOX WHICH SAYS: MEDIA FILES 69 OFFLINE
WHEN I PRESS CONNECT INSTEAD OF CONTINUE , THE RECONNECT FILLES BOX OPENS AND 69 OFFLINES FILES APPEAR. IN THIS RECONNECT FILES BOX THERE ARE 2 SECTIONS
THE 1ST SECTION HAS A LITTLE UNCHECKED SKIP FILE BOX AND ANOTHER LITTLE CHECKED BOX WHICH READS: SEARCH SINGLE LOCATION. WHEN I OPEN IT TWO OPTIONS ARE GIVEN AS FOLLOWS:
MACINTOSH HD: USERS WITH MY NAME AND DOCUMENT
LaCILE:FINAL CUT PRO DOCUMENTS; AUTO SAVE VAULT WITH THE TITLE OF MY FILE
WHEN I PRESS RECONNECT I GET THE FALLOWING PATH :
MY NAME.>MACINTOSH HD >APTS FCT 5 >GRAY FILES
WHEN I CHANGE THE SHOW BOX TO REVEAL FILES .I GET OFFLINE
WHEN I ADD RESEACH, IT TAKES ME TO THE A CHOOSE A FOLDER WITH THE FOLLOWING PATH:
MY NAME>LACIE DISK>FINAL CUT DOCUMENT >FOLDER >GRAY FILES WHICH CANNOT BE RVEALD., AND WHICH I CANNOT CHOOSE. IT GOES ON AND ON IN A CIRCLE WITHOUT HELPING ME TO GET MY FILES IN FCP FORMQAT.
WHAT SHOULD I DO MORE TO GET MY FILES BACK IN THE FCP FORMAT WITHOUT BEING STUCK TO OFFLINE FILES FOR EVER? YOUR STEP BY STEP TO WALK ME THROUGH TO REESTABLISH MY FILES WOULD BE GREATLY APPRECIATED.

A round-about problem
I thank you all for your very kind replies. I have rewritten my issue in lower case as suggested by all of you. I hope I will be helped.
Recently, I thought I had graduated from final cut express and final cut express HD when . I decided to install final cut pro. Perhaps a wishfull thinking!
I have a power book g4 v 10.4.8, processor 1.5 ghz sdram with internal memory of 80 storage disk and 1 gb ddr sdram. I also have an external LaCie with a 200 storage capacity.
In the process of installing final cut pro, I stupidly changed the name of the media file. Maybe this action caused all my clips, video and audio, files go offline. The options given to me by the Reconnect Files Table , to get my files back, are : Single Search Location and Search.
I tried and tried both with no success. I would be grateful to any ones who might be able to help me to recover my clips without going through the pain of recapturing them from the tape. There are several tapes to be recaptured.
Now, for those of you who may have the patience, please read more below to see what I have gone through.
When I try to get to the files, I get the first warning: “The file of this project is from an earlier version. Would like to update this project?” And then it continues: “Note, once saved, this file cannot be opened by previous version. To avoid overwriting the original project file , you can choose Save Project As from the File Menue when the project updating is complete”. (It was at this point where I changed the files names formatted by the previous versions).
When I say Yes, another box appears: Update Project. It reads as follows:
“This project contains one or more sequences which this version of Final Cut Pro can render with Motion Tap (i.e. scalable, rotation, etc). Please choose a scalable quality (“fastest” recommended is the quality level 4.5. New Quality checked inside the little Box are: Best. Normal Fastest or linear." I choose Normal. The unchecked little Box reads: "Remove existing files ( this action is not undoable, it says”.
(By the way, in my project no sequences, have been set up as yet; they are all clips inside the bins with red slash in all clips).
When I press OK, “Offline Clips” Box opens and says the following:
“Some of the media of your project references either changed, moved, or gone away. You can either Reconnect these files, or Continue with them being Offline”. Below this it continues:
“Forget files.” Below that there is an unchecked box which says: “Media Files 69 Offline”.
When I press Connect instead of Continue, the Reconnect Files Box opens with 69 Offline files. In this Reconnect Files Box there are two sections’
The first section has a little unchecked Skip Files Box and another little checked Box which reads: “Search Single Location”.
When I open it, two paths are given to recover my files:
My name>LaCie> Final Cut Document>Folder>Gray files which cannot be revealed, and which I cannot open. I go on and onl ike a checken without a head in a circle without being able to get to the files off Offline.
I have the same problem with the second path: My name>Macintosh HD>FCP 5>gray files.
What should I do more to get my clip files back in the FCP format without being stuck to Offline files for ever?
I am new to this field and enjoy what I am doing. I am old, and sometime my head goes off. Your expert step by step walking me through to reestablish my file linkage with Media would be greatly appreciated. Thank you all and have a nice holiday. Faruk Sabet

How to get the file name from Oracle B2B 10g

Hi My requirement is I am getting a CSV file from Trading partner, I am using oracle 10g b2b to translate the data.
In my BPEL 10g I am using AQ adapter to get the message from IP_IN_QUEUE.
Now I want to get the file name Eg: SampleFile.dat of the CSV file in my BPEL process.
I tried using the b2b.filename property in the receive activity and it is not getting the file name.
<sequence name="main">
    <receive name="Receive_Note" partnerLink="GetB2BNote"
             portType="ns1:Dequeue_ptt" operation="Dequeue"
             variable="Receive_Note_Dequeue_InputVariable"
             createInstance="yes">
             <bpelx:property name="b2b.fileName" variable="WriteFileName"/>
    </receive>
</sequence>
Can you help me to get the file name from Oracle b2b 10g ?
Thanks,
b2b user

Hi My requirement is I am getting a CSV file from Trading partner, I am using oracle 10g b2b to translate the data.
In my BPEL 10g I am using AQ adapter to get the message from IP_IN_QUEUE.
Now I want to get the file name Eg: SampleFile.dat of the CSV file in my BPEL process.
I tried using the b2b.filename property in the receive activity and it is not getting the file name.
<sequence name="main">
    <receive name="Receive_Note" partnerLink="GetB2BNote"
             portType="ns1:Dequeue_ptt" operation="Dequeue"
             variable="Receive_Note_Dequeue_InputVariable"
             createInstance="yes">
             <bpelx:property name="b2b.fileName" variable="WriteFileName"/>
    </receive>
</sequence>
Can you help me to get the file name from Oracle b2b 10g ?
Thanks,
b2b user

Spc.fp and spc.h not found, How can I get these files

Hello
I get a project from my friend, I opened it and built it, then there was an error, spc.h file not found.
Then I double clicked on the file spc.fp , it told me that the spc.fp not found.
I have used everything to search them , but I got nothing
Does someone can help me to get these files?
Thank you!
Clasu.

.fp files are small libraries of functions ("Instruments") normally associated to specific devices (e.g. a scope, a DMM or something similar) or to specific softwares (CVI comes with a set of instruments like the Programmer Toolbox, the Password Control and so on).
spc.fp may relate to Statistical Process Control Toolkit for CVI, a product whose only references on NI site date back to 1998 and is not listed any more among toolkits for CVI.
Can you ask your friend if my hypothesis is correct?
I do not know of any other standard CVI instrument with that acronym: could this .fp be a library of functions your friend wrote by himself?
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

AI CS3 Plugin: How to get the file format that is selected in the "save as" dialog??

Hi,
Someone please help me in getting the file format that is selected in the "save as" dialog. I wanted to retrieve it in the string format.
I tried sAIDocument->GetDocumentFileFormat. But i'm unable to implement it correctly. Is there a better way or How do I implement this? Precisely, I wanna get the value as a string when the user selects "save as .pdf".

Do you really need to know the file type? What about just checking the bit depth?
var doc = activeDocument;
if (doc.bitsPerChannel != BitsPerChannelType.EIGHT) {//Not 8 bit
doc.bitsPerChannel = BitsPerChannelType.EIGHT;
//do your save etc
}else{
//Ignore

Mac os x . Face Time - I connect to the other person and the call futs off and ends immediately.Please could someone help? Thanks.

Mac os x . Face Time - I connect to the other person and the call futs off and ends immediately.Please could someone help? Thanks.

What version of FaceTime are you using? The current one for 10.6 is 1.0.5.
FaceTime calls after April 16, 2014 – Unable to make or receive
FaceTime Troubleshooting

I am having trouble dating to version 3.6.14. I am running Linux/Ubutu OS and I get this error message:/tmp/p7x3vko2.part could not be saved, because the source file could not be read. Please help. Thank you , Deb

I am having trouble dating to version 3.6.14 or updating to the Beta testing. I am running Linux/Ubutu OS and I get this error message:/tmp/p7x3vko2.part could not be saved, because the source file could not be read. Please help. Thank you , Deb

Solved for me.
I set the owner/permissions of my profile's mozilla folder's (and all the files in it) to read/write access, and the problem disappeared.
in linux:''
* cd /home/myusername/.mozilla
* chown -cR myusername:mygroup ./
* chmod -cR +rw ./
'''Never do that with root privs (nor with sudo)'''

I cannot get i-tunes anymore. I tried the i-download. Still no help. I get an error message that reads The file "itunes Library itl" cannot be read because it was created by a newer version of iTunes. What can I do? tunes down load

I cannot get i-tunes. I tried the download, but no help. I get an error message The file "iTunes library itl" cannot be read because it was created by a newer version of iTunes. Any suggestions?

If you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
Not sure if the following site/link will tell the method...
•Apple - Support - iTunes - install & update:
http://www.apple.com/support/itunes/install/
•Troubleshooting iTunes installation on Mac OS X:
http://support.apple.com/kb/HT2311
Good luck & happy computing!
ps: i see you resolved this issue. it's magic!

I'm am trying to upgrade to the newest ITunes version. Whenever I try to do anything like this I get the following message "The installer has insufficient priviledges to access this directory...." Can anyone help? Thanks

I am trying to download the newest version of ITunes. When I try the download, it starts and after a bit the following message appears "The installer has insufficient priviledges to access this directory: C:\ProgramData\Microsoft\Start\Menu\Programs\ITunes The installation can not continue...."
Can someone please help?
Thanks,
I'm Always Confused

B Noir --
I can't tell you how much I appreciate your taking the time to help me with this problem. I'm doing a healing technician training class at my church, and have most of my study material on my ipod. It cashed this weekend which hindered my preparation for my class tomorrow night. I went to the local "Apple Store" late last night and they could get me up and running. They suggested that I call the APL CARD line which I did today, but they gave me a nice run around seccession, and did nothing. Then I was lead to "Google" my question, which eventually lead me to the "Apple" site. Praise the LORD for your help and may you be richly blessed with multiplied blessings in all that you put your hands to do. May you receive a great harvest. As far as I'm concerned you were used by the LORD, and are the real genius!!!
Thanks
JimTalbot7

When I try to access iTunes I get 'The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes.' But when I try to download iTunes I get error (-42408)...help please.

When I try to access iTunes I get 'The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. Would you like to download iTunes now?'' But when I try to down load I get "unknown error occurred (-42408)". Don't know what to do next and I can't get into my iTunes library. (I have an iMac, OS10.6.8.)

Did you uninstall iTunes 11 and replace it with iTunes 10.7? If so, you'll need to go through a few steps to put things right:
Rename "iTunes Library.itl" to some other name;
Copy newst ITL file from the "Previous iTunes Libraries" folder into your main iTunes folder and rename it to "iTunes Library.itl";
Download iTunes 10.7: http://appldnld.apple.com/iTunes10/041-7195.20120912.d3uzQ/iTunes10.7.dmg
Download/install shareware app called Pacifist;
Open Pacifist and, separately, mount iTunes DMG file -- drag iTunes PKG file into Pacifist and install iTunes via the Pacifist application -- be sure to answer yes to replacing everything Pacifist asks about;
Enjoy iTunes 10.7.
Cheers,
trane

I had Adobe digital editions on my old computer and when I bought my new computer, I could just never get my books transferred to my new computer. I downloaded the latest version but my library remains empty. How do I get my books back? Please help. Thank

Can any one help me with getting my books back into my library after I purchased my new computer. Thanks

Copy them from your old computer, or your backuo copy of your old computer. to your new one.
The music sync is one way - computer to ipod. the exception is itunes purchases.

Hic, help me ! thanks. get version file AI, EPS by C

Similar Messages

Maybe you are looking for