Hidde field

Hello everybody
Im working with Report Builder 10.
My question.
I need hidde a field when the value of this field is null.
Any idea?
Thanks in advanced & regards.

hi,
You can hide a field either by conditional formatting or format trigger.
Any format exception you specify in conditional formatting is automatically generated by report builder in format trigger
check the below link for more details
http://oracleapps4u.blogspot.com/2011/03/report-layout-conditional-formatting.html

Similar Messages

My MacBook Pro freezes whenever I try to type in a text field

In the past couple of days, out of the blue, My MacBook Pro (early 2011, Logic Board replaced twice by now due to video card issues) freezes whenever I try to type something in any text field of the system or or other apps.
Specifically, whenever I try to search for an item in spotlight, or search for a "help" item under each application's help menu, even when I try to type in the adress bar of (any) of my browser(s). The crash causes all running apps to freeze for a few seconds and makes things work drammatically slower.
I'm on 8GB RAM so I think this is ridiculous and I cannot think of any third party app causing the issue, since I have not installed anything in the past few days. I Also resolved and deleted any fonts that seemed redundant and/or probematic (I do have a lot of fonts installed as I am a graphic designer, but again, no new fonts were added any time recently).
Any help would be appreciated!
Thanks.

Thanks.
See below.
Let me know if you want me to stop all running apps and redo it.
Hardware Information:
          MacBook Pro (15-inch, Early 2011)
          MacBook Pro - model: MacBookPro8,2
          1 2.2 GHz Intel Core i7 CPU: 4 cores
          8 GB RAM
Video Information:
          Intel HD Graphics 3000 - VRAM: 512 MB
          AMD Radeon HD 6750M - VRAM: 1024 MB
System Software:
          OS X 10.9 (13A603) - Uptime: 0 days 1:13:42
Disk Information:
          TOSHIBA MK7559GSXF disk0 : (750.16 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    mem (disk0s2) /: 749.3 GB (253.42 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-8A8
USB Information:
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist
          [loaded] com.adobe.SwitchBoard.plist
Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist
          [loaded] com.nike.nikeplusconnect.plist
          [loaded] com.wacom.pentablet.plist
User Launch Agents:
          [loaded] com.google.keystone.agent.plist
User Login Items:
          iTunesHelper
          Dropbox
          Airmail
3rd Party Preference Panes:
          PenTablet
          Flash Player
          GRproofing
Internet Plug-ins:
          Default Browser.plugin
          Flash Player.plugin
          FlashPlayer-10.6.plugin
          iPhotoPhotocast.plugin
          JavaAppletPlugin.plugin
          QuickTime Plugin.plugin
          WacomNetscape.plugin
          WacomSafari.plugin
User Internet Plug-ins:
Bad Fonts:
          None
Top Processes by CPU:
              23%          Airmail
               6%          Adobe Photoshop CS6
               4%          WindowServer
               2%          Adobe InDesign CS6
               2%          coreaudiod
               2%          Google Chrome
               1%          EtreCheck
               0%          fontd
               0%          NotificationCenter
               0%          hidd
Top Processes by Memory:
          1.08 GB            Adobe Photoshop CS6
          344 MB             Adobe InDesign CS6
          213 MB             iPhoto
          172 MB             Airmail
          123 MB             WindowServer
          123 MB             com.apple.internetaccounts
          115 MB             iTunes
          106 MB             Safari
          98 MB              Twitter
          98 MB              mds_stores
Virtual Memory Statistics
          1.88 GB            Free RAM
          3.85 GB            Active RAM
          1.06 GB            Inactive RAM
          1.21 GB            Wired RAM
          918 MB             Page-ins
          0 B                Page-outs

Mac mini late 2012 wakes up unexpectedly with password field filling by itself

I just upgraded from OS X Mavericks 10.9.5 to OS X Yosemite 10.10.1 and have difficulty keeping my computer asleep. I always put it to sleep using the drop down menu.
Symptoms are:
1. Power light on Mac mini does not always pulsate from dim to bright when asleep. It is often constantly lit.
2. Mac mini wakes up without user intervention with password field filling itself in as if someone is typing it.
Attached peripherals:
Apple Magic Mouse (Bluetooth wireless)
Apple Keyboard with Numeric Keypad (USB)
Actions I have taken to remedy the situation:
* Turned Magic Mouse off using the power switch
* Turned off Wake for Network Access
* Turned off Sharing, deselecting every option
* Turned off Allow Bluetooth devices to wake this computer
This problem did not occur with OS X Mavericks.
Nothing is resting on the keyboard or mouse that could cause this.
Thank you for any suggestions and solutions. I appreciate any help.
Paul

Hi Loner.
I did the following:
1. Turned off Bluetooth and switched off Magic Mouse
2. Installed Logitech USB mouse
3. Put Mac mini to sleep
I thought that would solve it but it woke up from sleep again with this in the logs:
Dec 11 21:24:00 Pauls-Mac-Mini.local powerd[26] <Notice>: PID 26(powerd) TimedOut InternalPreventDisplaySleep "com.apple.powermanagement.delayDisplayOff" 00:04:59 id:0x100000028d [System: DeclUser IntPrevDisp kDisp]
Dec 11 21:35:26 Pauls-Mac-Mini.local powerd[26] <Notice>: Display is turned off
Dec 11 21:35:26 Pauls-Mac-Mini.local powerd[26] <Notice>: PID 70(hidd) Summary UserIsActive "com.apple.iohideventsystem.queue.tickle" 11:28:25 id:0x90000014d [System: DeclUser kDisp]
Dec 11 21:35:26 Pauls-Mac-Mini.local powerd[26] <Notice>: PID 26(powerd) Created InternalPreventSleep "com.apple.powermanagement.darkwakelinger" 00:00:00 id:0xd00000751 [System: DeclUser SRPrevSleep kCPU kDisp]
Dec 11 21:35:41 Pauls-Mac-Mini.local powerd[26] <Notice>: PID 26(powerd) TimedOut InternalPreventSleep "com.apple.powermanagement.darkwakelinger" 00:00:15 id:0xd00000751 [System: DeclUser SRPrevSleep kCPU kDisp]
Dec 11 21:35:41 Pauls-Mac-Mini.local powerd[26] <Notice>: Entering Sleep state due to 'Software Sleep pid=66': Using AC
Dec 11 21:35:44 Pauls-Mac-Mini.local powerd[26] <Notice>:
Dec 11 21:35:44 Pauls-Mac-Mini.local powerd[26] <Notice>:
Dec 11 21:37:32 Pauls-Mac-Mini.local powerd[26] <Notice>:
Dec 11 21:37:32 Pauls-Mac-Mini.local powerd[26] <Notice>: Display is turned on
Dec 11 21:37:34 Pauls-Mac-Mini.local powerd[26] <Notice>: Wake [CDNVA] due to EHC2/HID Activity: Using AC
Dec 11 21:37:34 Pauls-Mac-Mini.local powerd[26] <Notice>:
I'm perplexed but now we know it has nothing to do with the Magic Mouse.
I'm no expert but this worked fine under Mavericks.
Perhaps it is a keyboard driver that's a bit wonky under Yosemite while in sleep mode?
Maybe the OS can't communicate properly with the keyboard while asleep.
I have an idea to rule it out further:
I'll try unplugging the keyboard and use the Logitech USB mouse to put
it to sleep again.
I'll report back with any findings.

Enhace Datasource - Field is not showing in RSA6

Hi All,
I have enhaced stadard datasource 0FI_AP_3:
1)Append structure ZADTFIAP_3
2)Added new field "ZZTEST"
3)Active
4)But when i got in RSA6 in order to uncheck "hide field" the added field is not present !!! but in SE11 the new structure is OK.
ANy idea?
REGARDS

Hi
Check the status of the field in ROOSFIELD after activating ur datasourcse if still it is hidden then the following thread might help u
ROOSFIELD: standard SAP DataSource 0MAT_PLANT_ATTR several fields are hidde
Hope this helps
Sonal....

Hidde metadata on different steps of WF ?

Hi to all,
I was trying to hidde different metadata fields on different steps of the workflow, but without success. Some one knows how to make this?
Is there a script to add in the step to hide or display a field ?
UCM 10G version 10.350
tnks!
Edited by: Julian E. on Jun 3, 2012 1:44 PM
Edited by: Julian E. on Jun 3, 2012 1:59 PM

I think the initial question is WHERE you want to hide the fields.
- There are two forms, which display workflow items (either from the perspective of an approver, or from a perspective of the workflow); these cannot be modified by profiles, so you will need an idocscript (in a custom component).
- Then, there is a review workflow frame, which by default, displays no metadata.
- Finally, you can drill down to item's details (either DOCINFO or UPDATE), where you can use profiles - use dWfStepName or wfCurrentStep(0) in the rule activation condition.

Fields in DSO & Cube

Hi experts,
I have the field 0fiscyear in my dso and also in the cube. But
when creating transformation the field 0fiscyear is present in
the dso but not in the cube. So that i am unable to create
transformation for 0fiscyear.Anyone please explain me what
should i do to make the field visible in the cube.
And one more question. How can we select or hide the fields
of 0fi_ar_3.This data source is not visible in LBWE.
Full points will be assigned.
Thanks & Regards,
V N.

Hi VN,
Goto SBIW->Application Specific>Logistics>manage extract struvctures>initialization->appl specific setup of statistical dat -->select inventory mangement perform setup>
in the select materil movement/Setup: Invoice Verification, Revaluation as per your choice to load.
direct transaction OLI1BW for material movement
OLIZBW for invoice verification
once you gets into statistical setup give name of the run and termination time and date to setup then gofor excution
once setup tables start loading gotoRSA3 which is extrac chekor to chk u r datasource data
before all this make sure your data source as active.
i hope this is clear na
mahesh
Edited by: Mahesh Kumar on May 19, 2008 7:00 AM
Edited by: Mahesh Kumar on May 19, 2008 7:01 AM

Fields in Creation of free goods VBN1

hi everybody,
Can somebody expalin in detail the fields in creation of free goods(T-vbn1) like free goods quantity,additional quantity,documnet quantity and calculation rule....
<b>Please dont copy paste anything form SAP help....I read that one......</b>
I would appreciate if u explain with your sentence..
Will reward point if it helps.
Ghassan

Hi Gafoor,
Material
Material, for which free goods is to be
granted
Minimum quantity
Minimum quantity for which free
goods can be granted
From
Quantity of sales material
FGQ--- Quantity unit of free goods material
Free goods -- Quantity of free goods with reference to the quantity and quantity unit of the sales material.
AQU - Quantity unit of the free goods additional quantity
Rule - Calculation rule
Prorata
whole units
unit related
D -- Delivery controlling - it tells how you can manage the delivery of free goods with respect to the main item ordered.
Additional material - Additional material (only available for entry in exclusive free goods)
Hope it helps. Please reward if helpful.
Thanks & Regards
Sadhu Kishore

Open Field in ALV Report

Hi all,
i have to develop a ALV report.
In that report i have to put a open quantity column , so that the user can enter values in that, and that value should get updated in the database.
So please suggest me how to develop such report with open field.
Thanks in advance,
Regards,
Pawan

Hi,
Try executing the below code
REPORT YMS_EDITBLOCKALV.
TABLES : rmmg1,MCHB, mkpf.
DATA: BEGIN OF t_mseg OCCURS 0,
zeile LIKE mseg-zeile,
menge LIKE mseg-menge,
meins LIKE mseg-meins,
matnr LIKE mseg-matnr,
werks LIKE mseg-werks,
charg LIKE mseg-charg,
bwart LIKE mseg-bwart,
END OF t_mseg.
DATA:BEGIN OF t_mchb OCCURS 0.
INCLUDE STRUCTURE mchb.
data flag type c.
matnr LIKE mchb-matnr,
charg LIKE mchb-charg,
werks LIKE mchb-werks,
clabs LIKE mchb-clabs,
DATA END OF t_mchb.
TYPE-POOLS slis.
data: progname like sy-repid,
fieldcattab TYPE slis_t_fieldcat_alv WITH HEADER LINE.
data tabindex type i.
data wa_matnr LIKE mchb-matnr.
progname = sy-repid.
SELECTION-SCREEN BEGIN OF BLOCK b_b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS s_docno FOR mkpf-mblnr. " OBLIGATORY.
PARAMETERS p_docyr LIKE mkpf-mjahr. " OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b_b1.
START-OF-SELECTION.
SELECT zeile
menge
meins
matnr
werks
charg
bwart
FROM mseg
INTO TABLE t_mseg
WHERE mblnr IN s_docno AND mjahr = p_docyr.
CLEAR fieldcattab.
fieldcattab-col_pos = 1.
fieldcattab-fieldname = 'ZEILE'.
fieldcattab-tabname = 'T_MSEG'.
fieldcattab-fix_column = 'X'.
fieldcattab-seltext_l = 'Item'.
APPEND fieldcattab.
CLEAR fieldcattab.
fieldcattab-col_pos = 2.
fieldcattab-fieldname = 'MENGE'.
fieldcattab-tabname = 'T_MSEG'.
fieldcattab-seltext_l = 'Quantity'.
APPEND fieldcattab.
CLEAR fieldcattab.
fieldcattab-col_pos = 3.
fieldcattab-fieldname = 'MEINS'.
fieldcattab-tabname = 'T_MSEG'.
fieldcattab-seltext_l = 'Unit'.
APPEND fieldcattab.
CLEAR fieldcattab.
fieldcattab-col_pos = 4.
fieldcattab-fieldname = 'MATNR'.
fieldcattab-tabname = 'T_MSEG'.
fieldcattab-seltext_l = 'Material'.
APPEND fieldcattab.
CLEAR fieldcattab.
fieldcattab-col_pos = 5.
fieldcattab-fieldname = 'WERKS'.
fieldcattab-tabname = 'T_MSEG'.
fieldcattab-seltext_l = 'Plant'.
APPEND fieldcattab.
CLEAR fieldcattab.
fieldcattab-col_pos = 6.
fieldcattab-fieldname = 'CHARG'.
fieldcattab-tabname = 'T_MSEG'.
fieldcattab-seltext_l = 'Batch No'.
APPEND fieldcattab.
CLEAR fieldcattab.
fieldcattab-col_pos = 7.
fieldcattab-fieldname = 'BWART'.
fieldcattab-tabname = 'T_MSEG'.
fieldcattab-seltext_l = 'Inventory'.
fieldcattab-hotspot = 'X'.
APPEND fieldcattab.
end-of-selection.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = PROGNAME
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USERCOMMAND1'
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT =
IT_FIELDCAT = fieldcattab[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_ADD_FIELDCAT = fieldcattab
IT_HYPERLINK =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = t_mseg
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM usercommand1 USING r_ucomm LIKE sy-ucomm rs_selfield TYPE
slis_selfield.
CASE r_ucomm.
WHEN '&IC1'.
tabindex = rs_selfield-tabindex.
read table t_mseg INDEX tabindex.
select * from mchb into table t_mchb where matnr = t_mseg-matnr.
clear fieldcattab.
CLEAR fieldcattab[].
fieldcattab-col_pos = 1.
fieldcattab-fieldname = 'FLAG'.
fieldcattab-tabname = 'T_MCHB'.
fieldcattab-fix_column = 'X'.
fieldcattab-seltext_l = 'Check Box'.
fieldcattab-input = 'X'.
fieldcattab-edit = 'X'.
fieldcattab-checkbox = 'X'.
APPEND fieldcattab.
clear fieldcattab.
fieldcattab-col_pos = 2.
fieldcattab-fieldname = 'MATNR'.
fieldcattab-tabname = 'T_MCHB'.
fieldcattab-fix_column = 'X'.
fieldcattab-seltext_l = 'Material'.
fieldcattab-emphasize = 'C1'.
fieldcattab-input = 'X'.
fieldcattab-edit = 'X'.
fieldcattab-checkbox = 'X'.
APPEND fieldcattab.
clear fieldcattab.
fieldcattab-col_pos = 3.
fieldcattab-fieldname = 'CHARG'.
fieldcattab-tabname = 'T_MCHB'.
fieldcattab-seltext_l = 'Batch No'.
fieldcattab-emphasize = 'C2'.
fieldcattab-input = 'X'.
fieldcattab-edit = 'X'.
APPEND fieldcattab.
clear fieldcattab.
fieldcattab-col_pos = 4.
fieldcattab-fieldname = 'WERKS'.
fieldcattab-tabname = 'T_MCHB'.
fieldcattab-seltext_l = 'Plant'.
fieldcattab-emphasize = 'C30'.
fieldcattab-input = 'X'.
fieldcattab-edit = 'X'.
APPEND fieldcattab.
clear fieldcattab.
fieldcattab-col_pos = 5.
fieldcattab-fieldname = 'CLABS'.
fieldcattab-tabname = 'T_MCHB'.
fieldcattab-seltext_l = 'Stock'.
fieldcattab-emphasize = 'C601'.
fieldcattab-input = 'X'.
fieldcattab-edit = 'X'.
APPEND fieldcattab.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = PROGNAME
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USERCOMMAND2'
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT =
IT_FIELDCAT = FIELDCATTAB[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_ADD_FIELDCAT =
IT_HYPERLINK =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = t_mchb
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endcase.
endform.
FORM usercommand2 USING r_ucomm LIKE sy-ucomm rs_selfield TYPE
slis_selfield.
CASE r_ucomm.
WHEN '&IC1'.
IF rs_selfield-sel_tab_field = 'T_MCHB-MATNR'.
CALL FUNCTION 'ZALV2'
EXPORTING
CTU = 'X'
MODE = 'E'
UPDATE = 'A'
GROUP =
USER =
KEEP =
HOLDDATE =
NODATA = '/'
MATNR_001 = '200-200'
KZSEL_01_002 = 'X'
IMPORTING
SUBRC =
TABLES
MESSTAB =
SET PARAMETER ID 'RID' FIELD RMMG1-MATNR.
CALL TRANSACTION 'MM03' and skip first screen.
ENDIF.
ENDCASE.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = progname
i_callback_user_command = 'USERCOMMAND3'
it_fieldcat = fieldcattab[]
TABLES
t_outtab = t_mchb
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
endcase.
ENDFORM.
Regards,
chandru

Necessary Fields For Creation of Service PO of Order Type Relaese Order.

Dear Guru,
I have encountered an issue which i am trying to resolve...
My this requirment will seem little okward the way i am asking but i have no way...
The issue is I have to create a Service PO of Order type Release order (RO) using BAPI Function Module .BAPI_PO_CREATE1.
The service PO should be of multiple Item and services for particular line item should be multiple.
When I am creating this using ME21 or ME21N i am facing no issue.
But when i am using BAPI Function Module .BAPI_PO_CREATE1
i am getting following errors ;; The error which i am getting as below
T ID                   NUM MESSAGE
E BAPI                001 No instance of object type PurchaseOrder has been created. External reference:
E MEPO              000 Purchase order still contains faulty items
E SE                   029 Please maintain services or limits
E SE                   140 Service HIRING OF LCD: please specify unit of measure
But I am failing to findout in which field services or limits and unit of measurement have to maintain.
What are the necessary fields have to pass in Bapi import parameter and the table i am unable to findout.
Please show some way how to resolve this or give me some guideline to resolve this
Dear Moderator request your kind intervane to move this qurry into correct forum if i have asked this in wrong forum
Thanks and regards
saifur rahaman

Hi Saifur
Can you please elaborate how did you resolve the issue we are also facing same problem when we are trying to create the PO for service items through SRM it is throwing same error while creating the PO in SAP.
Email Id : [email protected]
Thank you in advance!!
Regards
Deepika

Issue in Creation of new Value Field in CO-PA

Hi,
I have a query in CO-PA Value Field Linking.
In my Development Client,
1. Created a New Value Field (No Transport Request Generated)
2. Linked to the above to new Conditon type created in SD. (Tranport request was generated) i.e. in Flow of Actual Values->Transfer of Billing Documents->Assign Value Fields
However then i try creating a new Value Field in my Production Client it throws a message 'You have no authorization to change Fields".
Is this an issue with authorization or i need to transport the Value field too from Development to Production client.
Please Advise.
Thanks in Advance,
Safi

Thanks Phaneendra for the response.
The creation of Value field did not create any tranportation request. Will this too be transported if i transport the Operating Concern.
Please Advise.
Thanks,
Safi

What are the mandatory fields while creation of material master in differen

what are the mandatory fields while creation of material master in different views?

Hi Gopi,
This is purely depends on the function configuration, which would be done MM consultants. Kindly check with them.
thanks & regards
Kishore Kumar Maram

BADI for changing fields during Creation of BP in CRM

Hello to everyone,
I need to find a BADI (or other way) to default several fields during BP creation in CRM (4.0 SR1 SP9). The fields I will like to set are TAX TYPE, TAX NUMBER, TAX CATEGORY, etc.. I have found the BADI BUPA_TAX_UPDATE but i dont see any suitable parameters (structures) to changes these fields. Please advice and thanks in advance.

Hi
If you use function BUPA_NUMBERS_GET then your BP number will already be buffered and you can avoid a DB read. It may also be that the BP is not in the DB yet anyway.
You can only pass one GUID in at a time - loop through IT_CHANGED_INSTANCES into a variable of type BU_PARTNER_GUID and pass that into the function as input parameter IV_PARTNER_GUID.
Cheers
Dom

Fields for creation of BP in cProjects front-end are read-only

Hi everyone,
I'm a beginner in SAP-Development/Customizing so I hope this question isn't too easy
I can't create a Business Partner using the cProjects front-end (Ressources > Staffing) because the necessary fields and buttons are read-only... (> web-Dynpro Component: DPR_ROL_STAFF; View-Info: VI_SEARCH_CREATE)
I'm using CPRXRPM 450_700 patch 0006
The field-control is standard-SAP (0SAP).
My user-account has all cProject-roles + SAP-ALL
I assume i can change the behaviour of these fields in the Field Control but I can't identify which is the corresponding Object Category to apply the changes.
- Is there a documentation which field belongs to which Object Category in Field Control?
- Or can somebody tell me a procedure to find it out on my own?
Thanks in advance

Hi,
generally it is recommended to use transaction BP or ALE distribution to get the business partner be created.
If you would like to create the BP in web UI directly, the user must have the Structural Authorization, see customizing path:
Collaboration Projects -> Resource Management -> Organizational Management.
It is very HR related topic, you may contact a HR consultant to know more details about it.
Kind regard,
Zhenbo

Error while selecting the fields in creation of Look-Up

Hi Experts,
I am getting following error message when writing a lookup.
Unknown column name "/BIC/XXXXXX" until runtime, you cannot specify a field list.
Would like to know whats the cause and how to solve it.
Regards
Shubh Karan

I think you dont have a field named /BIC/XXXXXX in the table from which you are trying to fetch the data. Chech the spelling of the field name and table name.

Can not see two fields in Crystal 2008 Developer explorer/designer view

I am currently developing crystal 2008 reports against the salesforce.com database using version 12.0.0.683 CR Developer Full version. I am using an updated driver that was provided in July or Aug 08 in order to view self referencing fields. The problem is that when I try and report against one of the tables (lead history) I cannot view two of the fields (New Value and Old Value)? I can see these two field (New Value and Old Value) in the database expert as the last two fields in the actual table, but the two fields are missing when I go into the explorer/designer view. In Salesforce, these two fields can not be filtered on, but I can export all the values in this table using Salesforece Apex data loader.

Please re-post if this is still an issue to the OnDemand Forum or purchase a case and have a dedicated support engineer work with you directly

Hidde field

Similar Messages

Maybe you are looking for