Hidde metadata on different steps of WF ?

Hi to all,
I was trying to hidde different metadata fields on different steps of the workflow, but without success. Some one knows how to make this?
Is there a script to add in the step to hide or display a field ?
UCM 10G version 10.350
tnks!
Edited by: Julian E. on Jun 3, 2012 1:44 PM
Edited by: Julian E. on Jun 3, 2012 1:59 PM

I think the initial question is WHERE you want to hide the fields.
- There are two forms, which display workflow items (either from the perspective of an approver, or from a perspective of the workflow); these cannot be modified by profiles, so you will need an idocscript (in a custom component).
- Then, there is a review workflow frame, which by default, displays no metadata.
- Finally, you can drill down to item's details (either DOCINFO or UPDATE), where you can use profiles - use dWfStepName or wfCurrentStep(0) in the rule activation condition.

Similar Messages

  • What are the different steps to follow in order to develop an application and deploy it into a PAC

    Hi,
    I developped a program on my computer but in order to deploy it in a PAC , I don't know what are the different steps to follow?
    What are the difference between a stand alone application and communication with server mode.
    Can the file which will be downloaded into the PAC be in a form othre than (.exe). 
    what does the deployment licence consist of??? is it a software? 
    if the file is .exe then how to maintain it?
    Thank you for all,
    Regards

    Hi!
       Since I'm familiar with FieldPoint PACs, I'll refer to that (but maybe it is similar for cRIO...).
       An embedded application (standalone), runs entirely and independently on the PAC, while if you're not doing this, you'll have your computer, with LabView, which is controlling the PAC.  In this mode, application is dowloaded in PAC's RAM, so when you reboot controller, application will be lost.  If you build an embedded application, you can provide for application to boot authomatically at boot, each time the PAC reboots.  These are some basic stuffs on embedded applications with LV.
        To deploy an application to a PAC, you need LabVIEW + Real-Time module. Without it, you can't build an embedded application on PACs.
        usually, the file dowloaded is an .exe, and some libraries.  What would you like to have, exactly? For example, I think you can buy a simple .exe, which is universal, which loads VIs dinamically, so you can download directly VIs, but I've never tried this way....
       Deployment license, I think, refer to PCs, id est, when you use a PC or PXI as embedded target, in PACs, you have it bundled (it seems to me) whit the PAC you buy, so you don't have to buy an extra license for every PAC you ship with your application.  Otherwise, if you develop a Real-Time application for a PC, you will ship PC + OS licensed + Real-Time extension licensed, but this is not your case, since you'll use PACs.
       The maintain problem... I've already faced with! Simply, for my needs it was enough to make an application which loads configuration files, depending on different task the controller has to do. If you have to dowload a completely new version of VI.... it's better to deploy new application from LV.  But maybe you can bypass this problem with dinamic VIs loading...
        Let me know if this help.... Have a nice day!
    graziano

  • What are the different steps for  costing related to repetitive manufacturi

    Hi PP guys
    can any one explain the different steps for costing in repetitive scenario as compared to discrete scenario what is the major difference
    thanks
    shaik

    Dear Michel,
    !.In REM scenario Product cost collector is required for all the products for which production booking is
    to be done.
    2.For each production version created a product cost collector will be created in KKF6N.
    3.Without a product cost collector production confirmation can not be done in MFBF.
    4.Product cost collector is the cost object in REM scenario.
    5.Once after creating material master,BOM,work center,rate routing,aproduction version the next steps
    is creating product cost collector.
    6.While creating the PCC,the system creates a preliminary cost estimate nothing bu the sum up of the
    BOM and dare routing cost.
    7.Either a prelimnary cost or a standard cost estimate can be used for doing the production
    confirmation in MFBF as per the REM profile assigned.
    8.Standard cost estimate can be done in CK40N and this costs gets updated in the material master.
    9.For every production confirmation made in MFBF the costs gets accumulated in the respective PCC.
    10.the variances can be settled periodically as per the business requirement.
    Regards
    Mangalraj.S

  • Explain the different steps involved in the process.

    very simple question.
    When you execute a query in oracle what happens. Explain the different steps involved in the process.

    Check out the documentation, explains it all:
    Overview of SQL Processing

  • Error message:" Couldn't complete the command because the scratch disks are full" Ive try to fix this many times following different steps but none of them work and my disks equal to over 250GB. Please help.

    . This error message pops up in Photoshop  when i just wanna create a new plain white template. I have downloaded agentransack to track down the temp files and for some reason it says nothing matches the temp files.I have a couple of drives including 2 SSD's. I've  try to fix this many times following different steps but none of them work and my disks equal to over 250GB. Please help. ( I am running windows 7 proffesional) 64 bit

    Good day!
    my disks equal to over 250GB.
    What’s relevant is the space on the disk/s you have assigned as Scratch Disks – what are they (Phortoshop > Preferences > Performance > Scratch Disks)?
    Regards,
    Pfaffenbichler

  • Why is metadata so different in Prelude as compared to Lightroom and Bridge?

    As a still photographer now shooting video, I'd like to have a similar workflow for video clips that I have for my still images for metdata entry. However, metadata seems to be completely different for video. I'd like to be able to enter common metadata entries for my still and video images at the same time. Both Lightroom 4.2 and Bridge CS6 make it look like this is possible, but the metadata only seems to be available from within those programs and doesn't transfer outside the program either in the file itself or in xmp sidecar files. I looked at Prelude and the metadata categories are completely different. I'm mostly concerned with the IPTC fields and the GPS fields that Lightroom applies using the Maps function. I understand that video has additional fields unique to video, but IPTC and GPS seem like they could be shared. My ultimate goal is to catalog the video files in our DAM, Canto Cumulus, which is accessible by hundreds of users. Photo Mechanic seems to write IPTC to an XMP file for video files, which can be read by Cumulus. It seems like Adobe should have similar functionality. Am I missing something?

    As a still photographer now shooting video, I'd like to have a similar workflow for video clips that I have for my still images for metdata entry. However, metadata seems to be completely different for video. I'd like to be able to enter common metadata entries for my still and video images at the same time. Both Lightroom 4.2 and Bridge CS6 make it look like this is possible, but the metadata only seems to be available from within those programs and doesn't transfer outside the program either in the file itself or in xmp sidecar files. I looked at Prelude and the metadata categories are completely different. I'm mostly concerned with the IPTC fields and the GPS fields that Lightroom applies using the Maps function. I understand that video has additional fields unique to video, but IPTC and GPS seem like they could be shared. My ultimate goal is to catalog the video files in our DAM, Canto Cumulus, which is accessible by hundreds of users. Photo Mechanic seems to write IPTC to an XMP file for video files, which can be read by Cumulus. It seems like Adobe should have similar functionality. Am I missing something?

  • Report results of test in different step

    Hello All,
      I have a section of a test sequence that loops through several iterations while looking for an acceptable result. The only result I am interested in is the passing result (or the last iteration if a passing result is not found).  I've tried a few different things like removing the result of the failed step from the result list, but this doesn't work if on-the-fly reporting is enabled.
      I have read a few different articles and posts that sound like they may have a better solution.  If I disable result recoding on the individual step inside the loop, then use a seperate step, after the loop to only record the result of the last iteration, the failed steps will never get into the report, even if on the fly reporting is enabled (presumably).
      My question is this: It is unclear to me how to set up that extra step outside the loop to copy the result from a previous step. Please advise.
    Thanks in advance,
    GSinMN 

    Give this one a try.  I think it is what you are looking for.  If you set up the looping on the step correctly it will only display the last result.  I have to stop looping if the step is pass.
    Let me know if you have questions or concerns.
    Regards,
    jigg
    CTA, CLA
    teststandhelp.com
    ~Will work for kudos and/or BBQ~
    Attachments:
    DiscardFails.seq ‏6 KB

  • Apple watch and iPhone show different step counts

    When I look at the activity app on my watch and on my phone, they show a different number of steps. For the most part i've been walking with both my phone and watch, so I'm wondering why the number doesn't sync between the two. Obviously on the phone its including some additional steps that it is counting that the watch didn't get. I have not calibrated it yet (doing a workout with the GPS on the phone). When I look at the raw data int he Health app, the phone is obviously counting a couple more steps each time. Is this something other people are encountering or will it fix once I've calibrated it?

    I have the same issue, but my iPhone actually has fewer steps counted. I did a dumb test to count steps myself and looks like my iPhone has more accurate steps. The thing bothering me most is the Health app picks steps from iphone and watch. It doesn't recognize sometimes the data is duplicated.

  • Repeatable different steps of a stepper motor

    Hello everyone,
    I am working on a project where i have a stepper motor moving a plate and a signal sensor who measures a distance. I managed to initialize the signal so my initial position is the position where the sensor gives me the minimum value (Voltage).Each time the stepper motor moves, i define it from the front panel. My question is, how can my stepper motor moves automatically for e.g. 8000steps then without define it again for another 5000 steps or whatever i want with a time delay. The definition of the steps now is being done from DAQmx Timing>Samples per channel. I want to run the program and the steps to be already defined wihtout change them again and again from the front panel. I attach my current VI.
    Thank you in advance
    Attachments:
    (2nd version (a-D).vi ‏73 KB

    Hi Chris,
    not a problem, we all were new at some point. In case you don't know there are boatloads of classes you can access online with your License or even without one:
    Here's a small collection (courtesy of crossrulz):
    3 Hour Introduction
    6 Hour Introduction
    LabVEW Basics
    Self Paced training for students
    Self Paced training beginner to advanced, SSP Required
    LabVIEW Wiki on Training
    Learning NI
    Getting Started with NI Products
    And if you are a student you can take a real class with NI for a ridiculously small amount of money (say, 93%) discount).
    With start twice I mean that I was wrong in believing you did so, when I fact you started two different tasks, so: nevermind.
    PFI stands for Programmable Function Input, which is confusing because it is probably assigned to an I/O line. I just asked to find out what section of your code I have to look at. I'm still not quite sure about this, butI understood you want to move the motor, when you push a button. The only part of your code, where you even read a button within a while loop is for the Direction Line. Apart from that you just write the inputs once and then forget about the tasks (not even stopping them sometimes). I suggest moving the button that should move the motor into a while loop. 

  • Error deploying data tier application to SQL Azure at "Registering metadata for database" step ... should I care?

    I'd like to move an on-premesis SQL Server Database to SQL Azure. I've used SQL Mgmt Studio to Extract Data Tier Application and save my db as a dacpac file. Now I'm connected to my Azure server and I've chosen to Deploy Data Tier Application. I select my
    dacpac and the deploy starts but then on the last step "Registering metadata for database" it times out. I've tried it a couple of times and each time the deployed database is there and appears to be fully populated, but I'm not sure if I can ignore
    that error and continue. What is supposed to happen in that step, and should I expect it to fail when deploying to SQL Azure? 
    I'm following the steps here http://msdn.microsoft.com/en-us/library/hh694043.aspx in the Using Migration Tools > Data-tier Application DAC Package section, except that to deploy there's no SQL Mgmt Studio > Object Explorer [server]
    > Management >"Data Tier Applications" node, so I'm deploying by right-clicking on the server name and choosing "Deploy Data-tier Application". 
    My (total) guess here is that it's deployed the database fine and it's doing whatever magic happens when you register a data tier application, except that it's not working for SQL Azure. 
    I'm running against a server created for the new Azure service tiers, not against a Web/Business edition server. 
    The full details of error I get are below. 
    thanks, 
    Rory
    TITLE: Microsoft SQL Server Management Studio
    Could not deploy package.
    Warning SQL0: A project which specifies SQL Server 2008 as the target platform may experience compatibility issues with SQL Azure.
     (Microsoft.SqlServer.Dac)
    ADDITIONAL INFORMATION:
    Unable to register data-tier application: Unable to reconnect to database: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding. (Microsoft.Data.Tools.Schema.Sql)
    Unable to reconnect to database: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding. (Microsoft.Data.Tools.Schema.Sql)
    Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding. (Microsoft SQL Server, Error: -2)
    For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&ProdVer=11.00.9213&EvtSrc=MSSQLServer&EvtID=-2&LinkId=20476
    The wait operation timed out
    BUTTONS:
    OK

    Hello,
    The registration process creates a DAC definition that defines the objects in the database, and register the DAC definition in the master system database in Windows Azure SQL Database.
    Based on the error message, there is timeout error when connect to SQL Database. Did you deploy a large database? When move large data to Azure SQL Database, it is recommended to use SQL Server Integration Services (SSIS) and BCP utility.
    Or you can try to create a client application with the Data-Tier Application Framework (DACFx) client tool to import database and handle connection loss it by re-establish the connection.
    Reference: http://sqldacexamples.codeplex.com/
    Regards,
    Fanny Liu
    If you have any feedback on our support, please click here. 
    Fanny Liu
    TechNet Community Support

  • Data loading from identical metadata of different databases

    Dear All,
    I have 8 Databases in source sql server and i need to load in oracle db which is target.I already loaded 1 db and i need to load other db data into the target which is oracle.
    as i have same metadata ,there is a confliction while i load data into oracle where second db tables will have same key values as in first db.
    i want to to :
    1.what is the best way to access these 8 db's to load in oracle.
    2.how to resolve the conflication about validating the same records already exists in db and i could not load it agian.
    how can we achieve in owb.
    regards,
    kum

    Ola Kum,
    From youre question I understand that you'll have to combine tables with the same name into one single target (your datawarehouse)...
    To get the data I would first get alle tables to your staging area within the target. here you can optimize quick loading ( try to get incremental loading, only get the changes within the source).
    After this you have to determine specific caracteristics of each source. Questions you'll need to ask yourself:
    Are all columns the same?
    Iif not, what source db should take the lead?
    Do you need to keep data seperate?
    In that case you might need to duplicate columns and store the source in the column name as well...
    the validation conflict must be resolved. As you already mentioned, the business key from two different sources could be the same. Ik would say you need to add the source to the business key combination. After this I would recommend using atificial key's when loading facts and dimensions.
    Hope this helps!
    Kind regards
    Moscowic
    Edited by: Moscowic on Aug 19, 2009 1:20 AM

  • BPF - Use different step region criteria

    Hi All,
       I've a doubt about BPF in step region criteria.
    I saw for each step of BPF I must use the same member. But is possible use different member?
    I have 3 step.
      The first is "OPENING PERIOD" where I execute a copy of data from different month using DATA MANAGER PACKAGE
      The second is "INPUT DATA" where I open a input schedule
      The third is "CLOSE PERIOD" like the first.
    Now, I want enable the "INPUT DATA" for 4 user with different COST CENTER so I can use step region criteria
    CC_10001   user1
    CC_10002   user2
    CC_10003   user3
    CC_10004   user4
    But I must use the same criteria also in step 1 OPENING PERIOD.
    Is possible use only 1 member?
    Like :
    CC_1001 user1
    Thanks,
      Marco

    Hi Moritz,
      thanks you to interested in my problem.
    Maybe I explained bad.
    In first step -
    1. OPENING PERIOD
    task: data manager package to copy and transform data
    role: Only one user SUPERADMIN
    I'd like to excute a copy from JANUARY to FEBRARY for all Cost Center.
    In second step -
    2. INPUT DATA
    task: cost center responsible plans his cost center
    role: owner defined in dimension property 'owner' in cost center dimension
    I want that different user open same template with different cost center ( I manage it using property OWNER and I think that work well )
    The third step -
    3. CLOSE PERIOD
    task: data manager package to copy and transform data
    role Only one user SUPERADMIN
    Is similar to first step and I want to copy all cost center in different scenario
    Main Problem
    When I execute a BPC, and I want excecute step 1 I'd like see only 1 step region and not more.
    Unlucky when I  create  BPF I must use the same data region for all step.

  • FM to read the different steps in workflow and the status at each step

    Hi All,
    Is there any FM in SAP which gives the detail roadmap of the steps taken in a workflow and the diffrent status or decision at each step.
    I am looking for something like what you see when you click on the "STARTED WORKFLOW" in the business workplace outbox.
    Which shows up the "steps in the process so far "  and the decision and the agents for each of them.
    Thanks,
    Charan.

    Hi,
      You can get the status according to the task. please check with FM "SAP_WAPI_GET_WI_DELTA".
    Regards
    SM Nizamudeen

  • How check what's stored in the data store at different steps in the model?

    I would like to place a table or form temporarily within the model to display the values in the data store as they change at different points at runtime.
    I tried simply adding a form, creating the same field types as are in the store, and then mapping the form fields' default values to the data store's fields. This does not work as it doesn't update automatically.
    Tips?
    Henning

    Hi Jarod,
                I have the similar problem of using the data form datastore as input for getting results.
    I wanted to know wether is it possible to use input field instead of expression box so that i can click submit button based on input displayed from data store.
    Also if i use expression box the values are getting concatenating instead i want to overwrite(dont know wether expressionbox value can be used as input) i couldnot overwrite the values.Can you let me know what is the function i need to use in the formula of expression box.
    I have posted the same in a thread
    want the data store values to be displayed in input field of form
    Thank You
    K.Srinivas

  • MDS Customize metadata for different user. Jdev 11.1.7

    I have a VO, ExampleVO. and i have 2 user, user1, user2.
    I want customize MDS
    user1 add one attribute , attr1, to ExampleVO through MDS session. ( using session to get MetadataObject, and get DOM, then add new attr1 to the DOM)
    but user2 not.
    I want the VO only display attr1 to user1. When user2 login, user2 can't see attr1.
    How can i customize this?
    I have changed SiteCC(), in the getValue() method, i return different value for user1 and user 2.
    But when I add attr1 using user1 and logout.  Then login as user2, can also see the attr1. This is not what i want.
    I am new to this. If my explanation is not clear, pls let me know.
    Thank you very much.

    I am able to fix this issue. After a series of R & D I was able to find that the root cause is %APPDATA%\jdeveloper. Deleting the relevant directory will solve this issue. In fact, I tried to delete the entire jdeveloper directory under %APPDATA% and the jdev 11.1.1.7 form generation issue got resolved. Those who find "referential integrity" issue may follow this approach.
    This solution also applies to this thread
    Auto Generate task Form

Maybe you are looking for