Hidden Key figures are not being displayed after unhiding

We've applied SP 14 - SP 22 in our 3.1C BW system. Prior to the patches going in, users were able to unhide hidden key figures through the Change Query local view and view them in the report once the query was executed. After the patches were applied, even though the key figures
were unhiden through the change query local view, they are not returned in the report after executing the
query.
As anyone run across this after appling this patch level ?

Hi Rajkumar,
Actually it is a generic extractor (customized) and the ODS active data is getting the delta records correctly. After I extract from R/3 and activate the ODS, the active table has correct results, but the change log table has the problem described before. All the fields comes from one single extractor.
The 0RECORDMODE that I mentioned is about the setting in the transformation to the ODS. You have the Technical rule group where you can set the 0RECORDMODE, in my case it is set to ' ' (blank) which means it will receive After-Images from the extractor (which I think is correct in my case). The most curious is that it is working for almost all key figures (all amount type), except for the Price Unit which is Quantity type.
Any other ideas?
Thanks.

Similar Messages

  • Some key figures are not being correctly reversed in the Change Log

    Hi Experts,
    I'm working with the BI 7 (SP 15) and I have created an ODS with Overwrite option (Record Mode equal to ' ') and a Cube receiving data from this ODS.
    Whenever I have a change in one existing record in R/3 side (already previously loaded to BW), it comes perfectly to the ODS and overwrite the record in the Active Data. However, in the change log table, the before image record is not reversing all the key figures, there is one (Quant type) which is not working and it is being doubled in the cube. All the other key figures are Amount type and are working fine. PLease see below some examples of the Change Log behavior:
    First time the record comes - Change log content:
    Material   Valid Dt   Cost Value      Quantity Rec. Mode      Req. ID
    1234     May/01   $  100.00       10          'N'     1
    Second time when the record changes the Date:
    Material     Date      Cost Value      Quantity Rec. Mode      Req. 1234     May/29   $  100.00       10          '  '     2
    1234     May/01   $  -100.00       10          'X'     2
    Then the final result in the cube, after it is compressed, is:
    Material     Date      Cost Value      Quantity
    1234     May/29   $  100.00       20      
    Also, I have a Counter in the transformation to the Cube which is a constant equal to 1, it is also being aggregated erroneously. I could create a routine to check the record mode coming, but I'm not sure it is the best solution.
    Can anybody help me to figure this out, please?
    Thanks in advance.

    Hi Rajkumar,
    Actually it is a generic extractor (customized) and the ODS active data is getting the delta records correctly. After I extract from R/3 and activate the ODS, the active table has correct results, but the change log table has the problem described before. All the fields comes from one single extractor.
    The 0RECORDMODE that I mentioned is about the setting in the transformation to the ODS. You have the Technical rule group where you can set the 0RECORDMODE, in my case it is set to ' ' (blank) which means it will receive After-Images from the extractor (which I think is correct in my case). The most curious is that it is working for almost all key figures (all amount type), except for the Price Unit which is Quantity type.
    Any other ideas?
    Thanks.

  • Check boxes are not being displayed in any list applets

    Issue: The check boxes are not being displayed in any list applets in the system. A check box can be marked in the system, but as soon as the user clicks anywhere outside of the box the check box 'visibly' disappears. If you hover the mouse over the check box it displays a 'Y'. However, check boxes are working fine for the form applet, the issue is only with the list applet.
    I verified the checkboxes work fine in the thick client and in production. However, it is the testing environment, which belongs to client, that is showing the above behavior. I think there is some setting that is missing for them. But I am unable to figure it. I would really appreciate if someone could help !!
    Thanks in advance

    One way that you could make it work (just tried it out again) is to use the windings font
    and use the checkboxes from there. However, you need to register the font with xml publisher. In the template builder for Word, you can put a configuration file under:
    C:\Program Files\Oracle\XML Publisher Desktop\Template Builder for Word\config
    (depnding on your installation). The file should have the name xdo.cfg or xdoconfig.xml.
    There is an example file: xdo example.cfg that you rename and change accoringly.
    The font is there setup for windows 2000 as an example. Select the correct font
    path - for my XP it is:
    <font family="Wingdings" style="normal" weight="normal">
    <truetype path="C:\WINDOWS\fonts\wingding.ttf" />
    </font>
    Then you can put the symbols into your RTF template and it will be rendered.
    At least it worked for me - with 5.6.2. (Availbable on Wednesday or Thursday), but
    I am pretty sure I tried it before with 5.5.
    Didn't have the 5.5 manual with me - so I have to check what that says again..
    Hope it helps,
    Klaus

  • Pictures are not being delivered after saying delivered on iMessage.

    Pictures are not being delivered after saying delivered on iMessage.
    Txting through iMessage works fine. Pic's won't send.
    I turned on and off everything and did all the necessary trouble shooting.
    I'm on a Verizon 4S. and I'm sure Verizon has nothing to do with iMessage system, since it's on its on server.

    bump

  • I just switched from Outlook to Mail and now the sent messages are not being displayed.  Help, please.

    I just switched from Outlook to Mail and now the sent messages are not being displayed.  Help, please.

    Back up all data. Rebuild the mailbox.

  • Some key figure are not update for movement type 101

    Dear All,
    I have done load for Inventory and now i am finding that for some material the with movement type 101 the key figures are not getting populated, for these materials the values in characteristics is getting populated fine.
    I have loaded the data according to stranded procedure in "How to Load...."
    I have checked the values of material in R3 and it is there.
    Example of the record::
    Material    Plant Movement type  Calender Day    quanity Base Unit
    10101      01       350                     01.02.2006     20             KG
    10101        01       101                     05.07.2006                      KG
    10101         01      101                      10.07.2006                      KG
    The Quantity is not appearing in second and third record.

    Hi,
    Please check whether you have set  ''Rule groups''  at transfermation level . There you can set the conditions like materials having movement type X can be updated to one Key Figure and material having movement type Y can be updated to another Key figure.
    Please check whether you have set this option at transfermation level.
    For example, may be in your case materials from different plants are updating to different key figure.
    Thanks,
    Edited by: kavitha nagandla on Feb 17, 2010 7:19 AM

  • Icons for apps are not being displayed when I open the App store, just getting gray color boxes

    Icons for apps are not being displayed when I open the App store, just getting gray color boxes

    Did you update your operating system?  If so, did it solve the problem?  I have not updated my OS because so many people complained that the newer Os's had problems.

  • Images are not being display in people search for few users - why ?

    Hello,
    In my farm, users having profile picture in UPSA and they are able to see in My Profile page as well.
    However when I find user in People search - images are not being display for few users while for others it works.
    I have checked picture property which is indexed and then I run full crawl still its same issue.
    Following are the settings for Picture Property - would you please let me know why its still not being display in people search ?
    Dipti Chhatrapati

    Dipti,
    Hope below urls will help you,
    https://littletalk.wordpress.com/2010/12/10/people-search-result-doesnt-have-images-in-sharepoint-2010/
    https://social.technet.microsoft.com/Forums/office/en-US/eea8aa10-4565-41bf-98ec-dc93fb600021/some-users-pictures-are-not-showing-in-people-and-groups-but-are-viewable-in-the-thumbnail-and-my?forum=sharepointgeneralprevious
    http://westerdale.biz/sharepoint-2010/display-active-directory-profile-thumbnail-photo-and-other-attributes-in-sharepoint-2010?doing_wp_cron=1421939809.4895009994506835937500
    Sudip
    Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

  • Data access disrupters  (DAD's)are not being displayed on control panel

    Hi,
    Data access disrupters are not being displayed on Application server control panel (sid.host.domine > HTTP Server > mod_plsql Services >DAD's ) But users are able to access their applications.
    Not able to see database access details through Application server control panel. Can you please tell me where could be the problem exists..
    Thanks,
    DJ

    I am assuming you mean Discriptors (instead of Disrupters) and I am not sure which release of Application Server you are running. But assuming it is 9i (say 9.0.3 on Windows), if you select the OC4J instance or container the applicatlion was deployed to. You will see a link to Data Sources displayed below Application Defaults.
    The files equivalent will be found in your <ORACLE_APPSHOME>\j2ee\<INSTANCE_NAME>\config\data-sources.xml

  • Special characters are not being displayed normally after recent update.

    FF messed up with that recent update. Special characters are now not being displayed properly - they somehow stretch the whole line where they are posted. It was fine before
    I.E.:
    http://www.discogs.com/artist/%E2%84%91%E2%8A%87%E2%89%A5%E2%97%8A%E2%89%A4%E2%8A%86%E2%84%9C
    ℑ⊇≥◊≤⊆ℜ
    Here you can see what I mean (Opera & FF screenshots), Opera has no problems with them, see highlighted:
    http://img525.imageshack.us/img525/3897/image16m.jpg
    Thanks

    Which version were you using before?
    Some font issues may be caused by graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
    You can disable it, but you might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
    orange Firefox button ''or'' classic Tools menu > Options > Advanced
    On the "General" mini-tab, uncheck the box for "Use hardware acceleration when available"
    Does that make any difference?

  • In Query key figure are not populated

    Hi Gurus,
    i am using a RSCRMBAPI to get the out put of my query into a Ztable but when i run my program the Ztable is getting data but no key figures are getting populated.
    plz help
    thanks
    neelu

    Hi gurus,
    i just have 1.6lac records with six keyfigures so i think its not the problem of limitation...
    then can somebody help me how to get rid of this, no key figure values are getting populated
    thanks and regards
    Neel

  • Why key figures are not displaying

    Dear Experts,
    I am faced with a problem not encountered before. My report has multiple key figures all of which are not displayed when I run the query. However if I change the view to Tabular format (from query properties) the key figures become visible.
    Request your help in resolving the issue.

    Hi,
    are you hidden the some key figures? please check.
    select the KF -> go to properties -> check the display tab - hide/show/hide can be shown.
    if not close and open one more time in query designer.
    Thanks,
    Phani.

  • Key figures are not appearing in the reports ?

    Hi Guys,
    After integration process BW with Crystal 2008. I have tried to build a report on Bex query on top the Infocube. I could not fine key figures. Can you guys help me out ?

    Hi,
    can you run the BEx query in transaction RSRT without any issues and keyfigures are shown ?
    Ingo

  • Virtual Key Figures-  RSRT says Key Figures are not valid

    Hi,
    Getting the following mssg when I try to generate a query in RSRT for the first time after I have coded Virtual Key Figures.
    For the characteristic that I am pulling the user entered data from:
    /BIC/ZNEWEST is not a valid characteristic for InfoProvider 0QM_C08
    Message no. BRAIN122
    Diagnosis
    "Customer enhancement RSR00002 or the implementation of BAdI RSR_OLAB_BADI delivers /BIC/ZNEWEST as the characteristic to be calculated. 1. is however not a valid key figure for Infoprovider 0QM_C08.
    System response
    /BIC/ZNEWEST is ignored.
    Procedure
    Check the exit."
    From the key figure I am using this info to populate value:
    "/BIC/ZKF3 is not a valid key figures for InfoProvider 0QM_C08
    Message no. BRAIN121
    Diagnosis
    Customer enhancement RSR00002 or the implementation of BAdI RSR_OLAB_BADI delivers /BIC/ZKF3 as the key figure to be calculated. 1. is however not a valid key figure for Infoprovider 0QM_C08 or /BIC/ZKF3 references the key figure . In this case, the basic key figure l  is enough to calculate in the exit.
    System response
    /BIC/ZKF3 is ignored.
    Procedure
    Check the exit."
    Any help would be appreciated.
    This is my first time using Virtual KF's.
    Thanks,
    Brandon

    Hi Ajay,
    Here is my code:
          FORM user_0QM_C08                                            *
    -->  L_S_RKB1D                                                      *
    -->  C_S_DATA                                                       *
    FORM user_0QM_C08 USING l_s_rkb1d   TYPE rsr_s_rkb1d
                         CHANGING c_s_data TYPE any.
    *-- Local data
      DATA: l_n TYPE n,
            FIN1 like /bic/azqm_O5000-/BIC/ZPFINNT,
           FIN2 like /bic/azqm_O5000-/BIC/ZPFINNT,
           STAR1 like /bic/azqm_O5000-/BIC/ZPFINNT,
            STAR2 like /bic/azqm_O5000-/BIC/ZPFINNT,
            TASK type STRING.
    *-- Field Symbols
      FIELD-SYMBOLS <ZNEWEST>.
      FIELD-SYMBOLS <ZOLDEST>.
      FIELD-SYMBOLS <ZPSTARNT>.
      FIELD-SYMBOLS <ZPFINNT>.
      FIELD-SYMBOLS <ZKF3>.
      FIELD-SYMBOLS <ZKF4>.
      FIELD-SYMBOLS <0NOTIFICATN>.
    *->>> Initial checks
      SELECT SINGLE * FROM  zvir_reports
             WHERE  infocube  = l_s_rkb1d-infocube
             AND    compid    = l_s_rkb1d-compid.
      CHECK sy-subrc IS INITIAL.
    *->>> Prepare the structure
      ASSIGN COMPONENT g_pos_0QM_C08_ZNEWEST
        OF STRUCTURE c_s_data TO <ZNEWEST>.
      ASSIGN COMPONENT g_pos_0QM_C08_ZOLDEST
        OF STRUCTURE c_s_data TO <ZOLDEST>.
      ASSIGN COMPONENT g_pos_0QM_C08_ZPSTARNT
        OF STRUCTURE c_s_data TO <ZPSTARNT>.
      ASSIGN COMPONENT g_pos_0QM_C08_ZPFINNT
        OF STRUCTURE c_s_data TO <ZPFINNT>.
      ASSIGN COMPONENT g_pos_0QM_C08_0NOTIFICATN
        OF STRUCTURE c_s_data TO <0NOTIFICATN>.
    *~~~>Changeable
      ASSIGN COMPONENT g_pos_0QM_C08_zKF3
        OF STRUCTURE c_s_data TO <ZKF3>.
      ASSIGN COMPONENT g_pos_0QM_C08_zKF4
        OF STRUCTURE c_s_data TO <ZKF4>.
    *do not go thru code if user fields are blank.
      IF <znewest> IS INITIAL OR <zoldest> IS INITIAL.
      Exit.
      Endif.
    *-->>> Read general data
      CLEAR: /BIC/AZQM_O5000, FIN1, FIN2, STAR1, STAR2, TASK.
      TASK = 'SCM'.
    get Start1 time
      SELECT /BIC/ZPSTARNT   FROM  /bic/azqm_O5000 INTO STAR1
             WHERE  notificatn        EQ <0NOTIFICATN>
             AND    /bic/ZNEWEST      EQ <ZNEWEST>.
      ENDSELECT.
    Get Finish1 time
      SELECT /BIC/ZPFINNT   FROM  /bic/azqm_O5000 INTO FIN1
             WHERE  notificatn        EQ <0NOTIFICATN>
             AND    /bic/ZNEWEST      EQ TASK.
      ENDSELECT.
    Get Finish2 time & Start2 time
      SELECT /BIC/ZPFINNT /BIC/ZPSTARNT FROM  /bic/azqm_O5000 INTO (FIN2 ,
    STAR2)
             WHERE  notificatn        EQ <0NOTIFICATN>
             AND    /bic/ZOLDEST      EQ <ZOLDEST>.
      ENDSELECT.
    *- Update key figures
      <zKF3>  = abs( FIN1 - STAR2 ).
      <zKF4>  = abs( STAR1 - FIN2 ).
    ENDFORM.                    "user_0QM_C08
    Thx

  • Text Variables are not being Displayed in the Output of the Query

    Hi All ,
    We have some column headings , which are populated through the Text Vaiables , But in the Query Ouptput only the tech names of the Text variables are being displayed . can anyone tell me why its happening like this . I want to debug the Query , please guide me in this regard
    Thanks in Advance.. Pls reply me as soon as possible

    Hi Nagarjuna reddy,
    Click on the properties of the infoobject enter the name of the description and next to that you can see the X/? buttion click on the this button and select the field/if the proper field is not there then create a field descriton and select. i hope this is works and correct me if i am wrong. for debuggin the query use a transaction code- RSRT.
    regs,
    Vachan

Maybe you are looking for