Hidden layers get PDFed anyway

Hello all,
I've been meaning to ask this for a while now:
Whenever I hide InDesign layers; then Export to a PDF; and choose Visible Layers (in the General options); and finish up and OK the producing of the PDF; the dialog immediately warns me that stuff from hidden layers will be in the PDF anyway! Sure enought there is!
Why?
Also, is there a way in Acrobat 8 or 9 Pro to remove an entire layer (OCG, in Acrobat-speak) along with its objects all at once?
I can't find it if it does this.
Mike Witherell in Maryland

The world's spun a few times since then Peter. I'm trying to think back.
I had a raft of buttons on a separate layer forming an index (call these buttons B). I could turn this layer on using a
button (call this button A) on the page in view, and a button on the index layer (call this button C) could then hide it
again.
The PDF was exported with all layers.
The visibility or otherwise was determined by the button options - visible in PDF or hidden.
So button A which turned on the raft of buttons forming the index was set to visible, but all the buttons on the index
raft (buttons B and C) were set to hidden. Mouse down of button A had the behaviour to show each of buttons B and button
C and hide button A - you have to list each event separately in the actions attributed to each button.
Mouse down of button C then hid buttons B and C and showed button A.
The crux I think is what you can define as a "field" for the purposes of the Button Option menu > Behaviors > Behavior >
Show/Hide Fields. I was defining buttons as fields. I can't remember/never knew whether you could define a layer as a
field. I think probably not, and you would have to make the contents of a layer a single button or selection of buttons
and then define them initially as visible or not visible in the PDF.
k

Similar Messages

  • QuickLook / Preview and PDFs with hidden layers

    Hidden layers in PDF files show up in preview, quicklook and in the generated thumbnails. Is there any known fix for this to get the content to render with only the visible layers?

    It would help to look at a sample. Can you post one?
    Also, check the "Show Large Images" Page Display preference.

  • Applescript: missing required parameter "including hidden layers"

    I've used this script (below) for packaging files in InDesign CS3, but when I upgraded to CS4 I always get this message: "Missing required parameter 'including hidden layers' for event 'package'." Does anyone know how to include this and where it goes?
    Thanks.
    on run
    display dialog "Whoa Dude, I'm a Droplet so drop an InDesign file on me"
    end run
    on open draggedItems
    tell application "Finder"
    make new folder at alias "Macintosh HD:Users:Melanie:Documents:ScriptFiles:Packaged:" with properties {name:"_Folder"}
    end tell
    set folderPath to "Macintosh HD:Users:Melanie:Documents:ScriptFiles:Packaged:_Folder:"
    repeat with currentFile in draggedItems
    tell application "Adobe InDesign CS4"
    set openedfile to open (currentFile as alias)
    set theDoc to (document 1)
    tell document 1
    package to folderPath copying fonts yes copying linked graphics yes copying profiles no updating graphics yes ignore preflight errors yes creating report yes
    set fileName to (name of theDoc)
    set filepath to folderPath & fileName & ".pdf"
    export openedfile format "Adobe PDF" to filepath using "[Smallest File Size]"
    save openedfile
    close openedfile
    end tell
    tell application "Finder"
    set NewName to fileName & "_Folder"
    set name of folder folderPath to NewName
    end tell
    end tell
    end repeat
    end open
    ---------

    I don't use InDesign/CS4, but it seems clear that the 'package' command now has additional parameters that you're not including in the command.
    Since it's telling you that 'including hidden layers' is the parameter that's missing, just append it to the packagecommand, with either a 'yes' or a 'no' depending on what you want:
    package to folderPath copying fonts yes copying linked graphics yes copying profiles no updating graphics yes ignore preflight errors yes creating report yes including hidden layers no

  • Flattening hidden layers

    I found a tutorial on ( www.comeandphotoshop.com/animated-neon-sign/ ) and followed it up to the point of animation. The effect worked fine but it involved stroking outlines then hidding the layer and creating a new layer and adding the effects to the new layer. So far so good everything looks great. Problem is when I flatten the layer to send out to web as a jpeg I get a box that says flattening will disguard all hidden layers. This looses some of the effect. Can you get past the deleation of hidden layers or is there another way to keep all effects? I need to save my hidden layers but can't keep them visible or once again it ruins the effect.
    Any help would be appreciated,
    Thanks
    Chuck

    Again.
    When you flatten, ALL layers are discarded. Flattened images don't have Layers, by definition. Any layer that had the visibility turned off will have no effect on the way the image looks whether it's flattened or not.
    Are you looking at this at 100%? Something else must be going on.
    Maybe what you mean by "turned off" is different than what I think. Are you clicking on the eyeball? Are you setting the Fill Opacity to zero perhaps (which is what I would do)?

  • Export hidden layers error

    Flash CS3
    Under 'Publish Settings' I have 'export hidden layers'
    checked.
    But every time I paste something from Fireworks, 'export
    hidden layers' unchecks itself.
    This behavior may also be triggered by other actions.
    Is there a solution to this problem?
    I have only been able to confirm the bug on the great www -
    no solutions :(
    Also if anyone has triggered this behavior in other ways,
    please post here (let's get smart).

    I'm having the same problem.  This is a constant frustration for the other developer working with me & I don't quite understand why the program defaults to doing this.  How do you submit bugs to Adobe?

  • PS Layers getting renamed after pasting (PROBLEM!!!)

    I am an experienced FCP user, but for some reason this is just beyond my FCP or PS knowledge. I have a .psd file that is imported into FCP, i double click the psd file, then select all the layers, then paste them into a new sequence. The layers show up fine, but if i move the layers up 1, they get renamed to the psd file name. If i just use the .psd file and move the layers up 1 or more, they are fine. But i need to cut/paste them all the time and have been dealing with this for quite some time and it *****.
    I first noticed this when i went to FCP 4 because we did a big upgrade with all of our software. FCP 3 to FCP 4, and all adobe stuff, PS6 to PS7, etc. But..
    Recently we got FCP 5 and the problem is still there, so we got PS CS, and still having this problem. Maybe it is just a FCP 4 and 5 thing. Seemed that FCP 3 was my favorite. I just thought it was a PS 7 thing or something, but when we got CS, it has to be something else. Anyways..
    Here is a breakdown of what i have been doing.
    1. Made a PSD file in PS 7, 2 layers. (Test.psd), then Open FCP 5, new project.
    2. Import it into FCP 5 and double click the file to open it up and see 2 layers.
    http://www.nofriends.com/stoker/Test1.jpg
    3. Pasted 2 layers into Sequence 1
    http://www.nofriends.com/stoker/Test2.jpg
    Notice layers stay named, but Sequence 1 gets named Test.psd instead of Sequence 1
    4. Move both layers up 1 to V2 and V3, the bottom layer (main) gets renamed the file name (Test.psd). text-photos layers stays the same
    http://www.nofriends.com/stoker/Test3.jpg
    5. Move both layers up to V3 and V4, and both layers get renamed to the file name of Test.psd
    http://www.nofriends.com/stoker/Test4.jpg
    6. If i go back to the original .psd file which I originally double clicked and move the layers up and down, they do not get renamed to Test.psd.
    http://www.nofriends.com/stoker/Test5.jpg
    I have used FCP since FCP 1.0 so i am not crazy. I used to be able to double click a layered psd file, then cut/paste the files into any sequence and the layers would keep their layer names, but it just does not work that way anymore.
    So...
    Is it just my FCP or is this just how FCP 4 and up works?
    Can someone please try these simple steps and see if the layers get renamed to the file name.
    This is a huge problem for me because if i ever go to fix the .psd file, it is impossible to reconnect media because it does not know what layer to reconnect since the layer is renamed to the file name.
    Please help.
    Thanks.

    Steve,
    Thanks for the help.
    I have trashed prefs, reinstalled, etc. Everything.
    I have used FCP for a looong time.
    It came around when i started using FCP 4.
    I thought it was just PS6 or 7 or something back then.
    Then when i "finally" got CS1, i thought the problem would go away.
    Nope.
    Totally weird.
    It is so frustrating. I might just call up Apple or something.
    It ***** when i have to make changes to a .psd file and it will not update when i go back into FCP because it doesnt know which layer to update since the file name is now like Main Menu.psd for each layer instead of naming each layer.
    Weird how i can double click a .psd file and it opens up in the timeline and the layers are there.
    Then select them both, paste them into a new sequence, move the layers up one and BAM, it gets changed to the file name.
    I have NO IDEA what to do.
    Biggest bummer.
    I feel like installing FCP 3 again.

  • Hidden Layers printing unwanted blank pages.

    When I use layers to hide portions of a document that I do not want to print all is well on pages that only include hidden layers and these pages do not print UNTIL I add page numbers to the document, and then all pages print - including the ones that only include hidden layers, and these pages are blank except for the page number.  I do need the page numbers included - so is there any way to not print pages that only have a page number on them?

    Have you considered using Conditional Text for the answers?
    I am not familiar with conditional text – I will need to investigate.
    It's not clear to me, either what the numbering scheme here might be. In the teacher's edition, do the pages with the answers get numbered in sequence, or do they have a special numbering system applied?
    Good question – In the teacher’s Answer Key I could go either way. My first choice would for the pages to be numbered sequentially with the first printable non-blank page to be #1. If the pages printed with the same page numbers that they have in the book that would not be the end of the world, there would be gaps in the page numbers for the non-printed chapter content – either way I don’t want the blank hidden content pages to be included in the document.
    If they are numbered in sequence, how do you synchronize numbering between the two editions if you don't include blank pages?
    Sequencing and synchronizing page numbers is not a significant problem – the instructor is just glad to have the answers and they do not care a lot about how the pages are numbered. However, having said that it would be really nice if a future version of InDesign Books could create both sequential page numbers and a Table of Contents for only the printed pages in an output document that would have layers that are not hidden.
    How is this bound? And how is it printed? Changing the page counts can be problematic unless the answer pages can be tipped in at binding.
    We deliver all of our documents electronically on CDs as PDF files so binding and printing are not problems for us.

  • How do I export to PDF in InDesign without the hidden layers

    Hi there
    This is probably a simple solution but I am trying to export a document to PDF in InDesign without the hidden layers.
    i.e - I have created a document that includes images etc from an existing PDF.
    When I open the new PDF and use the 'find' tool, Pro is highlighting words on the hidden (original pdf).
    I have tried exporting only the visible layers but is there a setting in InDesign that I can use to export only the visible content to pdf?
    Thanks in advance.

    Jenjimay wrote:
    I have tried exporting only the visible layers but is there a setting in InDesign that I can use to export only the visible content to pdf?
    Even if you mask off part of a PDF, or place a white rectange on top of it, the text will still be selectable. Other than with raster images, InDesign is not smart enough to clip off parts of a PDF (or rather, it's smart enough to leave them as they are). PDFs can contain incredibly complex objects, and any clipping routine would probably make as many mistakes as it solves problems.
    Introduce a small Transparency to this image or one on top of it, then export with Acrobat 4 (PDF 1.3) settings. Since that old version does not support native transparency, ID is forced to redraw the image, and then it will clip off excess data.

  • Does Safari support a interactive PDF with hidden layers? I'm on version  5.0.3 and the interactive PDF displays just fine, but our web development team tells me all the layers display when they view the same PDF on Safari.

    Does Safari support interactive PDFs with layers? Through the use of hidden layers and buttons we built in interactivity that allows the viewers to click on buttons to display different content. When I view the PDF in Safari 5.0.3 on my Mac OS 10.5.8 the PDF displays fine and the interactivity works. However our web design firm tell me the PDF displays all the hidden layers when they view it in Safari. Who's right?

    Try updating your Safari to the latest version, 5.0.5.
    Also check whether the rest of your system is up to date by going to Software Update in the Apple menu.

  • How do I Reveal/Hide Hidden Layers for viewing with Acrobat Reader (iPad)?

    Hi,
    I've created a document in Quark Xpress with multiple layers which I then exported to a PDF. Using Acrobat Pro I created hotspots which revealed/hid these layers on rollover. It works perfectly on the desktop version of Acrobat Reader but not on Acrobat Reader for iPad (where the hidden layers are automatically switched on and touching the hotspots does not hide them). Does anybody know a good work around to this?

    There are many features which are possible in the desktop version of Adobe Reader which won't work in Reader for tablets. I think this is one of them. Probably no workaround possible until the feature is updated.

  • Why are my hidden layers showing up in a PDF when i convert it from an Ai file?

    When I convert an illustrator file to a PDF the hidden layers are showing up when openned by a mac or iphone. This does not happen when i send it to people with a pc and is only happening to one person. What could be causing this and how can I fix it?
    Thank you.

    That's probably because the Mac people are opening or viewing the PDFs within the Mac's "Mail" program or with the "Preview" program and not with Acrobat.
    Since the Windows people aren't using these programs and most likely just Acrobat or Adobe Reader, the layers are kept hidden.
    I'm afraid the only way to truly keep those layers hidden is to delete them before saving your file as a PDF. (Of course, do a "Save As" and keep your original .ai file intact.

  • How to set the number of hidden layers for neural network?

     I am using "Multiclass Neural Network" to build a model. I can configure number of hidden nodes, iterations etc., but I couldn't find anything to configure number of hidden layers. How to configure the number of hidden layers in Azure ML?

    Here is the article describing it - https://msdn.microsoft.com/library/azure/e8b401fb-230a-4b21-bd11-d1fda0d57c1f?f=255&MSPPError=-2147217396
    Basically, you will have to use a custom definition script in Net# (http://azure.microsoft.com/en-us/documentation/articles/machine-learning-azure-ml-netsharp-reference-guide/)
    to create hidden layers and nodes per hidden layer

  • Uploaded page does not correctly display hidden layers

    Hi,
    I am a bit baffled by this as I haven't seen this in all my
    years using Dreamweaver.
    I have created a few links, that when rolled over they
    display a hidden layer that contains a styled table of contents (No
    links in the tables).
    This works perfectly as expected on my testing server, but
    when it is uploaded to the client webserver, the hidden layers
    display below each link, throwing the page out completely, and also
    the CSS style does not apply.
    Is there something on the clients webserver that needs to be
    changed or tweeked to recognise hidden layers, CSS etc?
    Cheers

    Are the layers actually hidden in the code? I mean when you
    look at the
    code view of the page (either in the CSS or the inline styles
    for the
    layers, depending on what DW version you are using), do you
    see -
    visibility:hidden
    or -
    visibility:visible
    Which?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Macnimation" <[email protected]> wrote in
    message
    news:e3q43i$1hg$[email protected]..
    > Hi,
    >
    > I am a bit baffled by this as I haven't seen this in all
    my years using
    > Dreamweaver.
    >
    > I have created a few links, that when rolled over they
    display a hidden
    > layer
    > that contains a styled table of contents (No links in
    the tables).
    >
    > This works perfectly as expected on my testing server,
    but when it is
    > uploaded
    > to the client webserver, the hidden layers display below
    each link,
    > throwing
    > the page out completely, and also the CSS style does not
    apply.
    >
    > Is there something on the clients webserver that needs
    to be changed or
    > tweeked to recognise hidden layers, CSS etc?
    >
    > Cheers
    >

  • Hidden Layers

    My site has hidden layers that function with side navigation
    bar links so that you can show different iframes within the same
    window of one page. The iframes show in the various hidden layers
    that are shown when you click on their corresponding side nav tab.
    The problem is that once you click on one of the side nav
    links to show a layer, they will disapear when you roll over any of
    the top navigation bars, which use the same extention to make a
    drop down menu,
    Here is an example:
    http://webdemo.camba.org/pages/developmentdept.htm
    If you click on "contact," the correct layer appears, but if
    you move your mouse to the top of the page, say to the search bar,
    the contact layer disappears again.
    Can anyone remedy this? I'm sure it has to do with the
    extention but I am not sure how to fix it.
    Thanks!

    [email protected] wrote:
    > My site has hidden layers that function with side
    navigation bar links so that
    > you can show different iframes within the same window of
    one page. The iframes
    > show in the various hidden layers that are shown when
    you click on their
    > corresponding side nav tab.
    > The problem is that once you click on one of the side
    nav links to show a
    > layer, they will disapear when you roll over any of the
    top navigation bars,
    > which use the same extention to make a drop down menu,
    > Here is an example:
    >
    http://webdemo.camba.org/pages/developmentdept.htm
    >
    > If you click on "contact," the correct layer appears,
    but if you move your
    > mouse to the top of the page, say to the search bar, the
    contact layer
    > disappears again.
    >
    > Can anyone remedy this? I'm sure it has to do with the
    extention but I am not
    > sure how to fix it.
    >
    > Thanks!
    >
    >
    your approach is flawed. If you're using an iframe, there is
    no point in using layers to hide the
    iframes. iFrames are meant to load different content
    depending on what you click on in the main page.
    Instead of hiding layers, you should just have one visible
    iframe, and load different content
    targetting this single iframe when you click on the
    navigation.
    Then, your problem will desappear. But if you don;t want to
    do that, the problem you're describing
    is probably due to the fact that you're using the same id or
    variable name in the function call to
    show-hide your layers on the menu and the layers that contain
    the iframes.
    Look at your code. Look at the javascript attached to your
    links, and you'll find the answer.
    seb ( [email protected])
    http://webtrans1.com | high-end web
    design
    Downloads: Slide Show, Directory Browser, Mailing List

  • Delete hidden layers script

    I wish, I wish for a javascript that would check my open document for hidden layers and delete them, thats all.
    Thank you,
    Richard

    Hello try67 and thank you very much for the script.
    It works well but not at 100%.
    As an example:
    If I have a InDesign file with 20 hidden layers. The script will delete 10, then when double-clicked again 5 more will be gone, do it again and 2 more will be deleted, so the run command needs to be repeated until all hidden layers are gone.
    I cannot find any particular pattern as to the way layers are deleted and what prompt the script to stop, but I am sure there is one.
    If you find out why please let me know, in the mean time this sure beats: selecting layers, right click, select delete layers, click yes, wait...
    Thanks again,
    Richard

Maybe you are looking for