Hidden objects in UNX causing errors in Web I reports

Hello All,
Is there a change in behaviour regarding hidden objects in universe? In earlier version of BO, we can hide a objects in universe and can still refresh the reports in WEB I based on that hidden objects.
Right now in BO 4.1, when I hide a object in universe (.UNX) the reports are throwing errors. Any suggestions on how it can be resolved?
Thanks

Hello,
It would be helpful if you provide the error message.
There are several articles about similar problem, like:
https://service.sap.com/sap/support/notes/1848566
https://service.sap.com/sap/support/notes/1943645
https://service.sap.com/sap/support/notes/1937725
Thanks and Regards,
Rabeb

Similar Messages

BI Launch Pad - Error opening Web Intelligence Report (Error: INF)

Hi:
We're working with 4.1 Support Pack 3 Patch 1
Version: 14.1.3.1300
We migrated a Webi report from development environment to testing and it was working fine.
After making some minor changes on the Web Intelligence report, we migrated again, but now when we open the Web Intelligence report we get the following error:
Faltal Exception occured. The cause was: com.businessobjects.corba.generic.container.proxy.internal.DependencyFailoverCallbackImpl$FailoverFatalException:
Prepare failover failed (Error: INF)
Any ideas?
Thanks in advance!
Kind regards,
Florencia

Hi Florencia,
It seems like report is corrupted some how.
To check report is existing in filestore or not , go to report in Launchpad->Properties->check File name , there should be frs path assigned to it.If not it is corrupted.
Ex : File Name:frs://Input/a_067/064/004/278595/auytslwhrgrdneqcvzbefs0-guid[atli.nsurgzit4q8pfgonmi].wid
If it corrupted , check in myfavourites : ~webintelligence folder , there you can find last auto saved instance.If not we may need to create new report.

Getting # to Refresh error in web-i report.

hello
yesterday i opened the report it was opened properly but today while i opening the same report i am getting #TOREFRESH error even i refreshed am unable to find the data it was showing the same error in the entire columns of a report.But while i am opening the same report via bi-launch pad it was showing the correct data.i am using SAP database.can anybody please let u know me y am getting the problem& what is the resolution for that.
Thanks in Advance
Suresh.

Hi Suresh,
Please go through below thread will help you-
#TOREFRESH ISSUE IN WEBI
#TO REFRESH Error In Webi report
If you are generating universe from BEx query then change aggregation property of the measure object from "Delegated" to "Sum" and then try.
~Anuj

Scheduling Error For Web Intelligence Reports

Dear Experts,
    I want schedule BO XI R3.1 SP 3 Web Intelligence reports.
    For this i want to give Adaptive job server :destination details.
    Can you suggest what i need to enter for below details?
   1)Host    ?
   2)Port?
   3)Domain Name?
   For Host can i give BO CMC name or can i give BO Server IP Address or suggest me right one?
   For Port can i give CCM -->Adaptive job server PID value or CMS Port or SIA Port or Suggest me right one?
   For Domain name what i need to enter?
   The errors i am getting as shown below while scheduling with different ways as i mentioned above..
Error Message:     server error. []: [CrystalEnterprise.Smtp]
Remote Instance in Federated Cluster:     No
   Error Message:     server error. [Error initializing SMTP server. Return code: [TCP send failed.]. Reason:                               [Port address].] [CrystalEnterprise.Smtp]
Reply will be appreciated
Regards,
Venkat.

Thanks a lot Konovolav,
Can you tell how can i find SMPT server details to fill host, port and domain name for email scheduling?
I can able to connect to Internet in my BO server.
Can you tell me the path to find above details?

Date Format Error in Web intelligence Report

I created Web intelligence report using the BEx query.
The problem is when i drop the date field in webi report it gives me only one date that is (01/01/1970)
but the year and month field that are calculated on BEx query is coming in correct way.
So any one have solution to this Bug.
I m currently on :SAP BO 4.0 SP 2
SAP BI 7.0 EPH 2 on NW 7.02 Instance.

HI,
Not getting whatever you are trying check...please give few more example where you are facing error.
Regards,
satya.

Error Launching Web Analysis Report from the Hyperion Workspace

Hi Everyone
When launching the report as a HTML from the Workspace, the output flashes briefly on screen
The view in the content pane disappears to leave a blank screen.
When I Select View | Refresh. The following result is returned "Web Analysis Information" -1
I have set the report in start up preferences. And Web Analysis preferences set to open as HTML
After logging on again the following error is shown " An attempt to open "Actual vs Budget" Failed
Show Details displays: this.getFocusRoot() is nullor not an object
The reports all display correctly when launched from the Web Analysis studio
Any ideas will be greatly appreciated
Thanks
G
Web Analysis Version
Server Information
Version: 11.1.1.0.0.724
Class Version: Java HotSpot(TM) Server VM
VM Version: Java HotSpot(TM) Server VM
VM Vendor: Sun Microsystems Inc.
Java Vendor: Sun Microsystems Inc.
Java Version: 1.5.0_11
OS Name: Windows 2003
OS Version: 5.2
Total Memory: 66519040
Free Memory: 22975320
Locale: English (United States)
Client Information
Version: 11.1.1.0.0.724
Class Version: Java HotSpot(TM) Client VM
VM Version: Java HotSpot(TM) Client VM
VM Vendor: Sun Microsystems Inc.
Java Vendor: Sun Microsystems Inc.
Java Version: 1.5.0_12
OS Name: Windows 2003
OS Version: 5.2
Total Memory: 34766848
Free Memory: 10688504
Locale: English (United States)

Hi Ian,
Thanks for the advise but I have looked into your possible solution and referred to the Web Analysis user guide. I have a number of reports and when selecting the Design for HTML option - a number of objects are valid and should be displayed in the workspace.
After creating reports from scratch - with valid objects - the problem still persists.
Unfortunately, I don't think this provides a solution to the problem.
Cheers
G

Error opening web analysis report in workspace: Array index out of range:2

I am able to view this report in web analysis studio with no errors..Its only when I go to workspace and open report do I get following error: Array index out of range:2.
Any suggestions?

Have you tried checking the "Design for HTML" from the Edit toolbar to see if you get any error when saving?
Do you have any advanced items on the report, as there are 4 types of differences between Studio and HTML:
- font differences, Workspace (DHTML) uses the WA Server fonts whereas WA Studio client machine fonts.
- Service Buttons are very restricted using Workspace
- Display: Tab selection, Splitter panels, Slider selection do not render in Workspace
- Cannot restrict WA Tools menu in Workspace at all, where you can in the Studio.
For exact details check out the Hyperion Web Analysis Studio User’s Guide from the Doc Library:
http://download.oracle.com/docs/cd/E10530_01/doc/nav/portal_4.htm

PSE11 stops working and is causing errors in the Reliablity Report Windows 8

I keep getting this error code can anyone assist me? I have had several calls into Adobe and the last person said if it is working disregard the error. I get that but it is effecting my performance. I have uninstalled twice and reinstalled it twice as well and the error continues. Please assist me once tech told me to install Quicktime and that did not help either it is a bit frustrating.
Source
Elements 11 Organizer
Summary
Stopped working
Date
4/11/2013 12:07 PM
Status
Report sent
Description
Faulting Application Path:              C:\Program Files (x86)\Adobe\Elements 11 Organizer\PhotoshopElementsOrganizer.exe
Problem signature
Problem Event Name:      APPCRASH
Application Name:           PhotoshopElementsOrganizer.exe
Application Version:         11.0.0.0
Application Timestamp:   503fdd1d
Fault Module Name:        QtCore4.dll
Fault Module Version:      4.8.1.0
Fault Module Timestamp:                503fbfa6
Exception Code:                c0000005
Exception Offset:              00050b14
OS Version:        6.2.9200.2.0.0.768.101
Locale ID:           1033
Additional Information 1:                111e
Additional Information 2:                111ef96ebf8a0fead9be2dd0c19dacd2
Additional Information 3:                7942
Additional Information 4:                7942f7a164f0a42120fbf45dde61b5dd
Extra information about the problem
Bucket ID:          3b07f926dcb86fc12af834aa3e6aa10e (-1150612356)

Start PSE to get to the Welcome screen.
Hold down the Ctrl + Shift keys and click Organizer. Keep holding down the keys until you see the Catalog window.
Select your catalog and click Repair. Select “repair anyway” even if PSE doesn’t find problems.
Then for good measure, click Optimize.
If repairing resolves your issue then fine else repeat the above steps, but click New to create a new catalog. If you’re able to import photos into the new catalog and the Organizer works fine, then problem can be old catalog.
Check for Task Manager and end the "ElementsAutoAnalyzer.exe" file and then try.
- Try launching Organizer directly from the exe with Admin rights.
Some more solutions once you try these are here http://forums.adobe.com/message/4994459#4994459
Thanks,
Garry

" Error in Web-Intelligence Report "

Hai Friend's,
I am having a Issue.
I have created Two Variable's ::
Initial Date
final Date
Measure Object -- calAmount
I have to calculate two thing's to create :: Initial Value,Final value.
initial Value =Initial Date(CalAmount)
final value = final Date(CalAmount)
can you let me know the Procedure to Implement in BO.

Hi
Let assume that ur initial and final dates
initial date=1/6/2011
final date=30/6/2011
and u having measure calAmount ,and u would like to display initial value of 1st date and final value of last date isnt it ?
then
create a variables
Var_initial value
=calAmount where(calendarday=initial date)
Var_final value
=calAmount where (calendarday=final date)
if u have problem with date then convert the initial date as todate(Initial date;"") and same for final date todate(final date;"")
Hope this helps U

Hiding object in UNX universe

Hi, We are using BI 4 SP7.
We have recently converted UNV universe to UNX universe. There are some hidden objects in UNV that are used in reports it is fine with UNV.
After converting UNV to UNX, those reports are failing because of the hidden objects. If we un-hide them then report is working fine. So there seems to be change in behavior of UNV and UNX.
Our universe will be used by others to create ad-hoc/custom reports. We don't want to have these objects to be visible to those report creators. Is there a way to hide some objects but still use in reports.

Hi, I have tried it.
I created a business security profile and denied access to specific objects for a user.
Objects are restricted to that user in Query panel, this is fine. But that user is not able to access these objects in the standard reports. Below error is thrown when i tried to refresh the report.
"An internal error occured while calling 'processDPCommandsEx' API. (Error: ERR_WIS_30270)"
Is there a way to enable access to objects for all users in reports but not Query panel ?
I added tried by adding 'ALL OBJECT' access in Display Data tab but it did not change anything.

Could not persist object with token:re00100000b7f6e12d419f(Error: INF)

Post Author: saravanan rangaraj
CA Forum: Migration to XI R2
Hi everybody,
I'm getting error, 'could not persist object with token:re00100000b7f6e12d419f(Error: INF)' while refreshing reports in infoview. If I logoff and logon it's working fine. The error repeats everytime after refreshing 3-5 reports.Can anybody say why it happens?

Post Author: saravanan rangaraj
CA Forum: Migration to XI R2
Hi everybody,
I'm getting error, 'could not persist object with token:re00100000b7f6e12d419f(Error: INF)' while refreshing reports in infoview. If I logoff and logon it's working fine. The error repeats everytime after refreshing 3-5 reports.Can anybody say why it happens?

Code 91 - Caused Error: (Object variable or With block variable not set)

Hi,
We are using FDM 9.3.1. We have enabled batch processing.
We are having following process being followed
- Batch Loader script will pull the data from dwh table for each entity, scenario, year and period
- Batch processing is set to serial and processlevel set to Up-To-Check
- We had following five files created for Location - EMAFF100
i. 1_EMAFF100_ACT_May-2011_RR.txt
ii. 1_EMAFF100_ACT_Jun-2011_RR.txt
iii. 1_EMAFF100_ACT_Jul-2011_RR.txt
iv. 1_EMAFF100_ACT_Aug-2011_RR.txt
v. 1_EMAFF100_ACT_Sep-2011_RR.txt
Batch loader process completed the processing for May - 2011, Jul - 2011, Aug-2011, Sep-2011.
But for Jun 2011 it has given the following error in the 'tbatchinformation' table and failed at import stage.
40751.6239236111 1_EMAFF100_ACT_JUN-2011_RR.TXT 2 2 91-Object variable or With block variable not set
When we checked the view error log from tool menu we found following
** Begin FDM Runtime Error Log Entry [2011-07-27-14:58:29] **
ERROR:
Code......................................... 91
Description.................................. File [1_EMAFF100_ACT_Jun-2011_RR.txt] Caused Error: (Object variable or With block variable not set)
Procedure.................................... clsBatchLoader.mFileCollectionProcess
Component.................................... upsWBatchLoaderDM
Version...................................... 931
Thread....................................... 5600
IDENTIFICATION:
User......................................... ncreighton
Computer Name................................ HYAPSDEV1
App Name..................................... EMATTEST
Client App................................... WebClient
CONNECTION:
Provider..................................... ORAOLEDB.ORACLE
Data Server..................................
Database Name................................ hydev_serv
Trusted Connect.............................. False
Connect Status.. Connection Open
GLOBALS:
Location..................................... EMAFF100
Location ID.................................. 762
Location Seg................................. 16
Category..................................... ACT
Category ID.................................. 13
Period....................................... Jun - 2011
Period ID.................................... 30/06/2011
POV Local.................................... False
Language..................................... 1033
User Level................................... 1
All Partitions............................... False
Is Auditor................................... False
We then re submitted data for Jun period and saw batch process got successfully completed and June data got imported successfully and also rest other processes got through.
Can any one provide exact cause for this error? As we have automated the data load from DWH to FDM And then to HFM. Hence when such error comes it disturbs lot of processing there on. Appreciate your early response.
Thanks in advance.

Hi SAP collegues,
At my site, BPC Excel created this problem too "Object Variable or With Block Variable not set" .
It turned out that this is symptom of a a dys-functioning BPC COM Plug-in in XL2007 or XL2010!
This is a consequence that your Excel recently crashed while using BPC. And it relates to an Excel Add-in becoming disabled when the applications crashes. Please check the following.
Note before doing the following, close all other open Excel and BPC sessions.
Within Excel go to File à Options
Select the Add-Ins option on the left
Select the <<COM Add-ins >> option in the Manage drop down, and click Go
Make sure that the Planning and Consolidation option is selected. If not, mark this box and click OK.
If you do not see anything listed, return to the Add-in screen and select the Disabled Items option, and see if Planning and Consolidation is listed there.
Let me know if you have any queries,
Kind Regards,
robert ten bosch

0Orgunit(hierarchy) and authorization object display getcell error in Webi

Hello,
         We are facing with GetCellData error in WebI to SAP BEx Query.
         This works perfectly fine in Bex for a particular test user who has access to particular org unit value.
         But in Webi we are getting this Getcelldata error.
        Tried all the options and message as recommended in sdn group.
        mdxtest returns no value.
        looked at all below messages but no luck.
GetCellData error in WebI to SAP BEx Query
Re: SAP BO WebI Report on top of BI Bex Query with Authorization Variable
in the rsecadmin, we get the same error like mentioned in below message
Hierarchy Authorization doesn't work for MDX but works for BEx Query.
Is any authorization required for this user to execute and view the authorized values in Webi?
or we have to assign any authorization ?(0BI_ALL is not assigned).
Please find below screenshots of BEx query auth log or Webi auth log (differences)
Bex auth log:
The Following Attributes Are Authorized and Thus Are Visible
0BBPPURGRPX
0BBPPURORGX
0BBP_BUYID
0BBP_ISCOMP
0BUS_AREA
0COMP_CODE
0CO_MST_AR
0CRMSALGRPX
0CRMSALOFFX
0CRMSALORGX
0CRMSRVTGRP
0CRM_SALGRP
0CRM_SALOFF
0CRM_SALORG
0CRM_SRVORG
0LEAVERS
0LOGSYS
0MAST_CCTR
0PERS_AREA
0PERS_SAREA
0PLANT
0PURCH_ORG
0PUR_GROUP
0SALESORG
0SALES_GRP
0SALES_OFF
This above log is missing for mdxtest auth log.
Is this the issue?
Any quick reponse or help really appreciated.
Regards,
Ravi
Edited by: Ravi Gadicherla on Feb 28, 2010 5:36 PM

Hi,
    Here is the log of MDXtest:
Buffering the Authorization Data
Buffering for InfoProvider 0PA_C01 and Users HRTEST93
InfoObject Properties Defined
Reading of Directly Assigned Authorizations
Direct Assignment Does Not Include Universal Authorization 0BI_ALL
Reading the Indirect Assignments with Authorization Object S_RS_AUTH
Does user have OBI_ALL?
No, the User Does Not Have Universal Authorizion 0BI_ALL
Negative Entry in SU53 Result of Failed Check for 0BI_ALL
Indirect assignments found; no universal authorization
Regards,
Ravikanth

Web Acceleration Client Error (513) - Internal Error The Web Acceleration Client detected an internal error which caused the connection between the Web Acceler

Web Acceleration Client Error (513) - Internal Error
The Web Acceleration Client detected an internal error which caused the connection between the Web Acceleration Client and Web Acceleration Server to be broken. Retrying the web page may correct the problem.
I get this error continuously when working in the ancestry.com website. I have to reload the page on almost every search I do on that website. This is the ONLY website that I get this error message on, can work continuously for several hours on other websites and never get this message. I've talked to the people at Ancestry.com support and they made 2 recommendations: turn of antivirus (did not help) or switch to another web browser. I tried both IE 11 and Chrome Version 31.0.1650.63 m and I did not have the problem with either of those 2 browsers getting this error.
Is there a problem with how Firefox and ancestry.com are communicating with each other?

Hello byron.lewis, many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you.

How to find the hidden objects in Webi Rich client report 4.0 sp 04 ?

Hi,
How to find the hidden objects in Webi Rich client report at BI 4.0 sp 04 ?
Best Regards,
ASR

Hi Sai,
Go to Report Element Tab-->There you have a Tab Cell Behaviors.
When you flip between 'With Data' and 'Structure Only' under 'Design' Tab,you can see the some cells will be hide/Un hide behavior,if hiding of cells applied.
Select that cell and then Under 'Cell Behaviors'-->'Hide' Tab-->and choose Show Option.
Regards,
Venkat P

Hidden objects in UNX causing errors in Web I reports

Similar Messages

Maybe you are looking for