Hidden WLAN Missing in N95

Web Browser (or any other App) is unable to find the Hidden WLAN whose Access Point has been alaready saved in the settings of N95.
When I turn OFF the broadcasting of the SSID, the WLAN wizard shows Hidden WLAN from which I created an AP and the phone prompted that AP is valid.
Internet Phone didn't list that in WLAN section but gave an option to use Hidden Lan, if I used the option and got connected to my SIP provider, WLAN connected icon came on main screen along with internet phone. And then when I started browsing it showed me an AP of hidden wlan.
But when I disconnected the Internet Phone, browser didnt list that AP.
This seems to be a bug, I am using Nokia N95(01.01) at v12.
Please help me out as I am bound to use office's hidden WLAN which I cannot change to broadcasting.
Ritz - Total Nokia Freak
N95 - Apps - GarminMXT, SymSMB2.5, Mobiola Webcam, ScreenShots, SameTime etc
Previous Phones - 3315, 3530, 6600, N70ME, N95 - Finally

When you have your WLAN hidden and configured as an AP.
Are you able to see it in the list of available APs presented by Web Browser or any other Application ?
I can only see it as HIDDEN WLAN in WLAN Wizard, none my Apps pick it up even if its properly saved as AP.
Please help.
Ritz - Total Nokia Freak
N95 - Apps - GarminMXT, SymSMB2.5, Mobiola Webcam, ScreenShots, SameTime etc
Previous Phones - 3315, 3530, 6600, N70ME, N95 - Finally

Similar Messages

  • Can't delete WLAN, missing anchor config...

    Using WLC v7.6.100.0
    (Cisco Controller) >config wlan delete <n>
    This WLAN is used in AP groups.
    Are you sure you want to continue? (y/n) y
    Anchors configured on WLAN - unable to delete WLAN entry.
    There are no anchors configured on the WLAN... I think this is seen when an IP address changes in the mobility group, but the anchor for a WLAN isn't removed prior to the change.  This is an old bug from 4.2
    https://tools.cisco.com/bugsearch/bug/CSCsy94911
    Anyone got a workaround other than resetting the WLC?  That would be very annoying...

    Hi Rasika,
    Yes I tried that .
    One thing to note is that when you add the problem anchor it no longer appears on the list of selectable anchors but it doesn't appear above in the configured anchors...
    I then tried removing all WLAN anchor configs, then changing the mobility group entry for the anchor WLC to the previous (original) IP entry, then adding and removing that.
    So I assume that there is hidden WLAN config mapping anchor wlc by MAC to IP...  If there is a mobility group change this config goes into limbo.... It's still there but is removed from GUI and console running config somehow
    :S

  • E71 and hidden WLAN

    I'm using a hidden WLAN, i.e. WLAN which doesn't advertise its name to the air. On laptops, I manually set this WLAN as default (I type its name when connecting for the first time), and that works just fine.
    How can I setup WLAN manually on E71 to connect to a hidden WLAN?
    Solved!
    Go to Solution.

    Menu > Tools > Settings > Connection > Access points > Options > New access point
    Connection name: my hidden wlan
    Data bearer: Wireless LAN
    WLAN network name: (o) Enter manually: enter SSID
    ...and the rest as appropriate.

  • HIDDEN WLAN

    WHAT IS HIDDEN WLAN? How to access this? can I browse internet throught this? anyone to know this please help me...
    Solved!
    Go to Solution.

    My name is James
    I have a Nokia 6710 Navigator, and am having a wlan problem, when i search for wlan's I find only "HIDDEN WLAN'.  Must I delete  this and try and create a new wlan?

  • E65 - Hidden WLAN

    Hi,
    I was wondering if someone has the same problem, and preferrably a solution to the hidden WLAN problem I'am currently having.
    I have at home a WLAN that does not send out its SSID.
    The E65 can perfectly be configuered to this with the setting "hidden" WLAN and giving the exact name in the settings.
    I manually setup everything, but even when using the WLAN wizzard, I cannot get connected to my network, unless I turn again SSID BROADCASTING on, on the WLAN router.
    This of course makes my WLAN visible to every neighbour.
    I haven't found any wrong settings so far, I am using it now with the SSID broadcast on, but I would prefer to turn it off again.
    Regards,

    hello be,
    I'm no WLAN expert, but managed to get my WLAN and E65 working without SSID broadcasting.
    The thing I did was, set SSID to broadcasting, configured E65, browsed the web in E65 over WLAN connection (as it detects the access point it asked me to "store it", I accepted), then, and only after get it working, I set the SSID broadcast off (and of course I turn WLAN scan off when I'm not using it).
    So far I can always access WLAN, never had a problem.
    Give it a try.
    Hope this helps

  • Eap LEAP wifi standard missing in N95 ?

    Hi there,
    i need eap leap security standard in order to connect to office wi fi , when i started to set up the connection i cant seam to find it under EAP security settings ?
    Now i had no problem settin this up on e60 e61 or even older s8 9300i ...
    Now am i missing something or this is not on the N95 pls be so kind and check urse lookin forward for ure reply ...
    PS ... have the latest fw my phone is sim free no branding there !
    regards laz

    guindasoft wrote:
    hello all,
    i have a nokia n95-3 and need to configure a wlan conecction using 802.1x EAP (LEAP) security.
    i have created a new wlan and selected EAP but i can not see any EAP-LEAP plugin to configure. 
    type:    rm-160
    model:    n95-3
    current firmware:   20.2.011 (13-05-08)
    thank you very much for any help.
    jose
    Message Edited by guindasoft on 29-Sep-2009 11:51 AM
    I think that N95 may actually be one of the rare WLAN enabled Nokia phone models that doesn't support LEAP authentication method at all.  It seems that you are out of luck connecting to that particular WLAN network unless authentication server on the network supports also some other EAP authentication methods e.g. PEAP, TTLS or TLS that are supported by the N95.

  • No WLAN in standby (N95)

    I got my N95 a few weeks ago and my network provider is from 3. I have noticed that my phone has not got the WLAN shortcut option under the calender in standby mode. But my sister has just got her N95 on T-mobile and she has got the WLAN option in standby.
    My active standby is turned on and we both have the latest firmware (12.0.013).
    Not a big deal as i still have wifi but it would be a nice shortcut.
    Another small difference, the T-mobile version has an animated menu option which is not in the 3 version.
    What is the point?
    Just make a standard N95 for all networks !
    Please help me **bleep** my phone, T-mobile style !

    13-Mar-2008 02:04 AM
    mission_man wrote:
    But my sister has just got her N95 on T-mobile and she has got the WLAN option in standby [...] Please help me **bleep** my phone, T-mobile style !
    Errm... Maybe I'm missing something but have you tried accessing the active standby configuration?
    The chances are your sister added that shotcut herself because I don't remember having it on my N95, which I also got from T-Mobile.
    Menu > tools > settings > general > personalisation > standby > active standby apps.
    I know I changed mne pretty quickly to have shortcuts to the Buetooth menu, Google maps and the music player:
    http://198.173.85.168/misc/shortcuts.jpg
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • There's a hidden accelerometer in the N95

    There's a hidden accelerometer in N95's - could be interesting!
    http://research.nokia.com/projects/activity_monitor
    There is an application that uses this to its advantage:
    http://www.bysamir.fr/rotateme/
    Only problem is that its not 'signed'.
    If any one can sign it for me, as i have no idea how, i will love them forever:
    http://www.gosymbian.com/forum/viewtopic.php?t=757
    o2-uk, N95 8GB
    V20.0.016, 28-02-08, RM-320, (88.01)
    Running Rotate Me 2.2 & Rock'n'Scroll & Shake SMS & ShakeLock & Flip Silent

    02-Nov-200710:09 PM
    petrib wrote:
    Such a sensor has already been in earlier models (the first one was the N90, I think, but also in N93, N93i). So, having it in the N95 isn't that surprising.
    And as pfboven hints, turn on the camera, watch the viewfinder image, and rotate the phone and you'll see why it is there.
    You are a complete genious!
    Anyway, i turned the phone while on camera and i can understand that it has a sensor for that.
    But will there be a software for other phones like the 6120c and n95 n9i etc to make use of the sensor?
    Nokia N95
    V 20.0.015
    0546553

  • Calendar missing from N95 Active Standby

    I'm really hoping someone can shed some light on this ... I had my active standby activated on my N95, all fine. Then I turned it off recently. I went to switch it back on, and the calendar's missing! It gives me no options to be able to switch it back on! I've tried a factory reset (under Tools/Settings/General) but that hasn't helped. Tried to see if there was a Software or Firmware upgrade, but apparently my phone is all up to date. Any ideas? Anyone? (I know this seems like a weird request, as there are HEAPS of posts asking how to get rid of the calendar on active standby, but the fact I didn't change anything & it's just done it is concerning.)
    Message Edited by nemnem on 04-May-2008 03:24 AM

    Back up all your data to your PC using PC Suite's content copier, and then shut down your phone. Hold down 3 buttons: GREEN, 3 & * while switching on your phone. Make sure don't release your fingers till the phone ask for pin. You'll lose everything that's on your phone memory, and if you restore that from a back up, you'll be back to where you started, but this seems to have worked. You'll also lose things that your network operator may have installed. But oh well. Still no idea why it happened in the first place though!

  • Unable to connect to WLAN with Nokia N95

    Hi
    Just bought a nokia N95 and I'm unable to connect to the WLAN at my work place. No problem connecting to my home WLAN, and there are no problems connecting my laptop to the workplace WLAN.
    I browse for WLANs and select "Start web browsing", the wlan name comes up find and I select it, but after quite some time I get: "Internet: server not found".
    I've read the other posts about assigning a static IP, but the sysadms here will kill me if I try that. Is there another way of getting this to work? It can't be true that the N95 is so picky with WLAN configurations?
    Jens

    Can you post your question on here with the WLAN AP model name, firmware version and N95 sw version (*#0000#)?
    http://discussion.forum.nokia.com/forum/forumdisplay.php?f=121
    Forum Nokia provides a wealth of resources to mobile developers. To be informed about the latest on mobile tools, devices and technologies, register at http://www.forum.nokia.com/main/registration/registration.html

  • Satellite L300-145 (PSLB0E) - graphic card, LAN and WLan missing

    Hi,
    I've recently reinstalled windows Vista Home Premium but now I have some drivers missing.
    The graphic card and both Lan and WLan are missing.
    I've download and installed both Lan and graphic card controllers but i can't find the right WLan.
    The problem is that, the USB Wlan card is not reconnized and is showing as "Unkown Device".
    I looked under the properties inspector and i found that product id shows 2 values: USB\VID_0BdA%PID_8197&REV_0200 and USB\VID_0BA&PID_8197 and is found at Port_#0006Hub_#0007 also, under name of fisical object i find it to be \Device\USBPDO-9.
    I'm not totally sure that this is the Wlan card but since is the only thing that's working correctly i figure that's it. I've tried intel, antheros and realtek drivers, allways reinstalling the previous one so no conflicts would happen, but still nothing happens and windows still doesen't reconnize itm so
    Please, what's the card name and where can I find the RIGHT controller for it?

    Hi
    First of all you really get all drivers for your notebook on the Toshiba website:
    http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
    The drivers are pretested so I can not imagine that none of them are working.
    On this website http://www.pcidatabase.com I have searched for this vendor ID but I cant find anything. Only with the device ID 8197 it shows a Realtek WLAN card so I suppose you have to use this driver.
    Please check it again!!! Make sure that you have installed SP2 at least and before you install the WLAN driver again, remove all other versions and clean the system using CCleaner.

  • Disable wlan on a n95

    just been reading that a way to save battery is to only enable wlan when needed, now i thought mine was disabled yet i still get the icon which looks like 4 little boxes, so where would i disable it on a n95?
    thanks for any help

    Hiya,
    You must have an application running that is set to use WiFi automatically...
    Check the running programs and see if there's something open (press & hold the menu button to see running programs).
    If there's nothing there, either reboot the phone, or switch the profile to "Offline" for about 20 seconds, if it asks if you want to connect via WiFi, press no, then switch it back to General or whatever.
    Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
    Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

  • Files Hidden or Missing? Mark Spencer Motion 3 Book

    hello, i'm working with the Motion 3 book by Mark Spencer.
    When I open up my folder Motion 3 Book Files > Media > Ducati.. Then the book has me open a TextElement file, but I can't see any of the Media in the folder. I can see it when I open up the file from my desktop, but not in Motion. How do I view all the files in the Ducati folder?
    Thanks.
    By the way Lesson 4 seems to be wacky as far as the directions. I got lost and wasn't able to choose "if you get lost open up this project" type of thing. The book seems to be missing some steps, but **** it's a good book to learn motion overall. I just wish Lesson 4 had multiple save points because the work flow can get very confusing. I got lost up to the point where I add the "light" effect.
    Thanks again.

    Hi Mark
    I have your book Motion 3. There are a few problems with the book.
    1: page XV Installing the Lesson Files: It reads the disc contains 7GB data. My disc in inspector only contains 2GB.
    2: Page 124 Addiing Objects in 3d
    I have tried to follow and I cannot get the camera to do anywhere near to what is in the book. The exercise from page 124 to 148 is impossible if there is not a "catchup file" after page 128.
    That is as far as I have got.
    Many thanks
    Justin Howard
    128 Elderwood
    Gallinule Road
    Woodhaven
    Durban
    4004

  • WLAN missing from home screen of nokia E63

    I am a E63 user....the WLAN scanning suddenly stoped actually i was using an app for my phone,Upvise i wanted to cut the wifi connection i did so by going to connectivity>conn. mgr. and killed the connection after that i am uable to scan Wlan networks and when i go to WLAN wizard it shows 'system error'......please help my ASAP.....
    Thanks 
    Solved!
    Go to Solution.

    Hi bmadan123cool,
    Welcome to the Nokia forum!
    A software update should fix this issue straight away. 
    Make sure you make a back up with Nokia Suite first and don't tick the Settings box as this will backup the bug that's causing this. Once you've made the backup, click on the green arrow in Nokia Suite and update or reinstall the current software.
    After you've done the above, place the backup back onto your phone and then it should work perfectly. 
    If the above hasn't worked, take a another backup and enter *#7370# into your phone and default security code 12345, unless you've changed this code yourself. Place the backup back and then this should definitely fix the issue. 
    Let me know how you get on!
    Iris9290
    If my post has helped you in any way, please accept it as a solution or click on the white star, so that other users will be able to benefit from it too.

  • Real player missing on n95

    hi guys.
    just got my n95 the other day. at first real player worked then stopped. i looked through the forums and found that it might be a proxy setting.
    great, i can check that...wait, where's real player?
    so i can't go into tools and open real player to check on that cause its not there. another forum said do the firmware again and it may come back. videos started to play again but no icon for real player anywhere that i can see on the phone. definitely not in tools like most post say it should be in. I'm afraid the issue is going to crop up again and it'd be nice to fix instead of having to redo the phone over again.
    any suggestions?
    Thanks
    Solved!
    Go to Solution.

    RealPlayer is in "Applications", not "Tools".
    Furthermore, you can access its settings directly (on V21.0.016 firmware at least) in Menu > Tools > Settings > Applications.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Maybe you are looking for

  • Datatable wackiness - JSF trying to read a non-existant field from a bean

    I am having a very strange problem in JSF. I currently have one links page with four commandLinks in it, and one JSF page witha datatable in it, and an IBM <hx:pagerDeluxe> in it to page through the data. Each command link fires off a different actio

  • How to transfer parameters in jsp files

    what i want is : there is a jsp file named errorMsg.jsp, and in the file a variable msg which type is String is used, and the value of msg will be display on web browser. now, i want transfer a string to the errorMsg.jsp in another jsp file named try

  • How To Configure Or Intialize Portal Installed With BI7.0 -  Step By Step

    Hello Gurus How do I configure or start working on portals which is installed as part of BI 7.0 installation that is  EP and EP Core(Includes BI-JAVA and ABAP Stacks). Please help me out with possible guidance(if possible Step by Step procedure) how

  • Viruses, malware, trojans, etc.

    I have an MPB, OSX 10.5.8 and a 16.5 year old son. I was able to resolve the kernel panic problem, but only because I had access to an external drive version of an install disc with which I could fire up Disk Utility, which then made repairs. I had b

  • Oracle 11g driver to be configured to weblogic9.2

    Hi All, I need oracle 11g driver to be configured to weblogic9.2... Surfing for this found we need to add ojdbc5_g.jar; but no luck. Can u advise here if u have any idea? Thanks in advance.