Hide a output field in FM

Hi Guys,
I have one structure with 12 fieds.
in 1 FM i need display all 12 fieds,
but in another FM i need to hide 3 field in the above 12 field.
How can i hide a output field in a function module??
Thanks,Shaik

HI,
You cannot hide the field .. what you can do is create a new structure with 9 fields that you want to display.. and use this structure in the FM rather than the one that you are using..
No hide option available
Thanks
mahesh

Similar Messages

How to hide a output field without changing its layout

Hi
My requirement is that i ahve a field which is just for calculation purpose and I do not want it to show as output.
I want to know how to do that without changing layout.

Hi,
If your are using module pool. Goto the field attribute, in attribute select Display-> select Invisible check box.
Regards,
Bhaskar

HOW TO ASSIGN F4_VALUE_HELP FOR A REPORT OUTPUT FIELD???

Hi Gurus,
Can you please help me out in assigning F4_VALUE_HELP for a report output field where it is taking value as the input parameter....... If possible please help me out with some sample code ....
Regards,
Santosh
Intelligroup

I don't think that you are get the F4 functionality by pressing F4, but maybe if you use a hotspot you could achieve it. Check this sample. When you click on a company code in the list, it fires the F4 help defined by the program.
report zrich_0001 .
tables: t001.
data: begin of it001 occurs 0,
      bukrs type t001-bukrs,
      butxt type t001-butxt,
      ort01 type t001-ort01,
      land1 type t001-land1,
      end of it001.
start-of-selection.
select bukrs butxt ort01 land1 into table it001 from t001.
loop at it001.
    format hotspot on.
    write:/ it001-bukrs.
    hide it001-bukrs.
    format hotspot off.
    write: it001-butxt.
endloop.
at line-selection.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
       exporting
            retfield    = 'BUKRS'
            dynprofield = 'BUKRS'
            dynpprog    = sy-cprog
            dynpnr      = sy-dynnr
            value_org   = 'S'
       tables
            value_tab   = it001.
Regards,
Rich Heilman

XSLT mapping sorting against an output field

Hi, all
I am testing my XSLT mapping. Here is the output message type defintion:
I want to sort f2 in my xslt mapping. Here is my mapping:
<?xml version="1.0" encoding="UTF-8" ?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://fileconversion" xmlns:ns1="http://fileconversion">
    <xsl:template match="/">
      <ns1:TESTOUTPUT_MT>
        <Msg>
        <xsl:for-each select="ns0:TESTDATA_MT/Trans/Detail">
        <xsl:sort select="Transaction/Data/f2" />
          <Transaction>
            <Data>
              <f1>
                <xsl:value-of select="PERNR" />
              </f1>
              <f2>
                <xsl:value-of select="POSITION" />
              </f2>
              <f3>
                <xsl:value-of select="TEL" />
              </f3>
              <f4>
                <xsl:value-of select="concat(concat(STREET,' '),CITY)" />
              </f4>
            </Data>
          </Transaction>
            </xsl:for-each>
        </Msg>
      </ns1:TESTOUTPUT_MT>
    </xsl:template>
</xsl:stylesheet>
The sorting did not execute on field "f2" and the data is in the same order as the input.
Note that I can do <xsl:sort select="POSITION " /> instead and it will work. But I am trying to test on sorting against output field as this is the requirement in the real interface.
What did I do wrong? Please advise.
Thanks,
Jonathan.

Hi Jon - You can sort the source values. If you use "sort select="Transaction/Data/f2" i don't think it has got some effect.
You can use <xsl:sort select="POSITION " /> Any issues with that?
Just to add - when you map Position with F2... how does the sorting will be different when you execute it on F2 or Position?
If you are doing some calculation for F2 then should handle the Sort function accordingly..

Hide grand total field on ALV report, But keep the sub total fields

Dear Experts,
1) How to hide grand total field on ALV report, But keep the sub total fields.
2) How to populate rate per ton & calculate total price according to the qty in delivering document.

Dear Experts,
1) How to hide grand total field on ALV report, But keep the sub total fields.
2) How to populate rate per ton & calculate total price according to the qty in delivering document.

Display output fields in Hierarchy format in ALV report

Hi,
I have a requirement to display the output fileds in ALV report, the output format is like this . The output field should be in ALV format, under each purchase order its corresponding line item should appear.
Pruchase Order 4700000581
company code        item
        9001                     10
        9001                     20.
        9001                     30.
Pruchase Order 4700000174
        9001                     10
        9001                     20.
Can any one please help me how to do this in ALV report.

Hi
This can be achieved using the Heirarchial ALV list
see the sample and do it
REPORT ZALV5_OBJECTS.
TABLES : EKKO.
TYPE-POOLS : SLIS.
TYPES : BEGIN OF TY_EKKO,
EBELN TYPE EKPO-EBELN,
EBELP TYPE EKPO-EBELP,
STATU TYPE EKPO-STATU,
AEDAT TYPE EKPO-AEDAT,
MATNR TYPE EKPO-MATNR,
MENGE TYPE EKPO-MENGE,
MEINS TYPE EKPO-MEINS,
NETPR TYPE EKPO-NETPR,
PEINH TYPE EKPO-PEINH,
END OF TY_EKKO.
DATA: IT_EKKO TYPE STANDARD TABLE OF TY_EKKO INITIAL SIZE 0,
IT_EKPO TYPE STANDARD TABLE OF TY_EKKO INITIAL SIZE 0,
IT_EMPTYTAB TYPE STANDARD TABLE OF TY_EKKO INITIAL SIZE 0,
WA_EKKO TYPE TY_EKKO,
WA_EKPO TYPE TY_EKKO.
DATA: OK_CODE LIKE SY-UCOMM, "OK-Code
SAVE_OK LIKE SY-UCOMM.
*ALV data declarations
DATA: FIELDCATALOG TYPE LVC_T_FCAT WITH HEADER LINE.
DATA: GD_FIELDCAT TYPE LVC_T_FCAT,
GD_TAB_GROUP TYPE SLIS_T_SP_GROUP_ALV,
GD_LAYOUT TYPE SLIS_LAYOUT_ALV.
*ALVtree data declarations
CLASS CL_GUI_COLUMN_TREE DEFINITION LOAD.
CLASS CL_GUI_CFW DEFINITION LOAD.
DATA: GD_TREE TYPE REF TO CL_GUI_ALV_TREE,
GD_HIERARCHY_HEADER TYPE TREEV_HHDR,
GD_REPORT_TITLE TYPE SLIS_T_LISTHEADER,
GD_LOGO TYPE SDYDO_VALUE,
GD_VARIANT TYPE DISVARIANT.
*Create container for alv-tree
DATA: GD_TREE_CONTAINER_NAME(30) TYPE C,
GD_CUSTOM_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER.
*Includes
*INCLUDE ZDEMO_ALVTREEO01. "Screen PBO Modules
*INCLUDE ZDEMO_ALVTREEI01. "Screen PAI Modules
*INCLUDE ZDEMO_ALVTREEF01. "ABAP Subroutines(FORMS)
*Start-of-selection.
START-OF-SELECTION.
ALVtree setup data
PERFORM DATA_RETRIEVAL.
PERFORM BUILD_FIELDCATALOG.
PERFORM BUILD_LAYOUT.
PERFORM BUILD_HIERARCHY_HEADER CHANGING GD_HIERARCHY_HEADER.
PERFORM BUILD_REPORT_TITLE USING GD_REPORT_TITLE GD_LOGO.
PERFORM BUILD_VARIANT.
Display ALVtree report
CALL SCREEN 100.
*& Form data_retrieval
text
--> p1 text
<-- p2 text
FORM DATA_RETRIEVAL .
SELECT EBELN
UP TO 10 ROWS
FROM EKKO
INTO CORRESPONDING FIELDS OF TABLE IT_EKKO.
LOOP AT IT_EKKO INTO WA_EKKO.
SELECT EBELN EBELP STATU AEDAT MATNR MENGE MEINS NETPR PEINH
FROM EKPO
APPENDING TABLE IT_EKPO
WHERE EBELN EQ WA_EKKO-EBELN.
ENDLOOP.
ENDFORM. " data_retrieval
*& Form build_fieldcatalog
text
--> p1 text
<-- p2 text
FORM BUILD_FIELDCATALOG .
Please not there are a number of differences between the structure of
ALVtree fieldcatalogs and ALVgrid fieldcatalogs.
For example the field seltext_m is replace by scrtext_m in ALVtree.
FIELDCATALOG-FIELDNAME = 'EBELN'. "Field name in itab
FIELDCATALOG-SCRTEXT_M = 'Purchase Order'. "Column text
FIELDCATALOG-COL_POS = 0. "Column position
FIELDCATALOG-OUTPUTLEN = 15. "Column width
FIELDCATALOG-EMPHASIZE = 'X'. "Emphasize (X or SPACE)
FIELDCATALOG-KEY = 'X'. "Key Field? (X or SPACE)
fieldcatalog-do_sum = 'X'. "Sum Column?
fieldcatalog-no_zero = 'X'. "Don't display if zero
APPEND FIELDCATALOG TO GD_FIELDCAT.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'EBELP'.
FIELDCATALOG-SCRTEXT_M = 'PO Iten'.
FIELDCATALOG-OUTPUTLEN = 15.
FIELDCATALOG-COL_POS = 1.
APPEND FIELDCATALOG TO GD_FIELDCAT..
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'STATU'.
FIELDCATALOG-SCRTEXT_M = 'Status'.
FIELDCATALOG-OUTPUTLEN = 15.
FIELDCATALOG-COL_POS = 2.
APPEND FIELDCATALOG TO GD_FIELDCAT..
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'AEDAT'.
FIELDCATALOG-SCRTEXT_M = 'Item change date'.
FIELDCATALOG-OUTPUTLEN = 15.
FIELDCATALOG-COL_POS = 3.
APPEND FIELDCATALOG TO GD_FIELDCAT..
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'MATNR'.
FIELDCATALOG-SCRTEXT_M = 'Material Number'.
FIELDCATALOG-OUTPUTLEN = 15.
FIELDCATALOG-COL_POS = 4.
APPEND FIELDCATALOG TO GD_FIELDCAT..
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'MENGE'.
FIELDCATALOG-SCRTEXT_M = 'PO quantity'.
FIELDCATALOG-OUTPUTLEN = 15.
FIELDCATALOG-COL_POS = 5.
APPEND FIELDCATALOG TO GD_FIELDCAT..
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'MEINS'.
FIELDCATALOG-SCRTEXT_M = 'Order Unit'.
FIELDCATALOG-OUTPUTLEN = 15.
FIELDCATALOG-COL_POS = 6.
APPEND FIELDCATALOG TO GD_FIELDCAT..
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'NETPR'.
FIELDCATALOG-SCRTEXT_M = 'Net Price'.
FIELDCATALOG-OUTPUTLEN = 15.
FIELDCATALOG-COL_POS = 7.
FIELDCATALOG-DATATYPE = 'CURR'.
APPEND FIELDCATALOG TO GD_FIELDCAT..
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'PEINH'.
FIELDCATALOG-SCRTEXT_M = 'Price Unit'.
FIELDCATALOG-OUTPUTLEN = 15.
FIELDCATALOG-COL_POS = 8.
APPEND FIELDCATALOG TO GD_FIELDCAT..
CLEAR FIELDCATALOG.
ENDFORM. " build_fieldcatalog
*& Form build_layout
text
--> p1 text
<-- p2 text
FORM BUILD_LAYOUT .
GD_LAYOUT-NO_INPUT = 'X'.
GD_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
GD_LAYOUT-TOTALS_TEXT = 'Totals'(201).
gd_layout-totals_only = 'X'.
gd_layout-f2code = 'DISP'. "Sets fcode for when double
"click(press f2)
gd_layout-zebra = 'X'.
gd_layout-group_change_edit = 'X'.
gd_layout-header_text = 'helllllo'
ENDFORM. " build_layout
*& Form build_hierarchy_header
text
<--P_GD_HIERARCHY_HEADER text
FORM BUILD_HIERARCHY_HEADER CHANGING
P_HIERARCHY_HEADER TYPE TREEV_HHDR.
P_HIERARCHY_HEADER-HEADING = 'Hierarchy Header'(013).
P_HIERARCHY_HEADER-TOOLTIP = 'This is the Hierarchy Header !'(014).
P_HIERARCHY_HEADER-WIDTH = 30.
P_HIERARCHY_HEADER-WIDTH_PIX = ''.
ENDFORM. " build_hierarchy_header
*& Form build_report_title
text
-->P_GD_REPORT_TITLE text
-->P_GD_LOGO text
FORM BUILD_REPORT_TITLE USING PT_REPORT_TITLE TYPE SLIS_T_LISTHEADER
P_GD_LOGO TYPE SDYDO_VALUE.
DATA: LS_LINE TYPE SLIS_LISTHEADER,
LD_DATE(10) TYPE C.
List Heading Line(TYPE H)
CLEAR LS_LINE.
LS_LINE-TYP = 'H'.
ls_line-key "Not Used For This Type(H)
LS_LINE-INFO = 'PO ALVTree Display'.
APPEND LS_LINE TO PT_REPORT_TITLE.
Status Line(TYPE S)
LD_DATE(2) = SY-DATUM+6(2).
LD_DATE+2(1) = '/'.
LD_DATE3(2) = SY-DATUM4(2).
LD_DATE+5(1) = '/'.
LD_DATE+6(4) = SY-DATUM(4).
LS_LINE-TYP = 'S'.
LS_LINE-KEY = 'Date'.
LS_LINE-INFO = LD_DATE.
APPEND LS_LINE TO PT_REPORT_TITLE.
Action Line(TYPE A)
CLEAR LS_LINE.
LS_LINE-TYP = 'A'.
CONCATENATE 'Report: ' SY-REPID INTO LS_LINE-INFO SEPARATED BY SPACE.
APPEND LS_LINE TO PT_REPORT_TITLE.
ENDFORM. " build_report_title
*& Form build_variant
text
--> p1 text
<-- p2 text
FORM BUILD_VARIANT .
Set repid for storing variants
GD_VARIANT-REPORT = SY-REPID.
ENDFORM. " build_variant
Reward points for useful Answers
Regards
Anji

Hide Unwanted Excise Fields in MIGO & J1IEX

In our business process, the duties such as NCCD and SED are not required and consequently we don't want these fields to appear in MIGO and J1IEX so that users can't put any value by mistake.
Can any one provide some idea what the settings required for this?
Thanks in advance

Hi,
To hide some fields in MIGO, NEED to do configuration settings. Then you can hide the required fields. The pathway as follows...
SPRO->SAP REFERENCE IMG->NATERIAL MANAGEMENT->INVENTORY MANAGENET AND PHYSICAL INVENTORY->SETTINGS FOR GOODS MOVEMENT(MIGO)---> FIELD SELECTION FOR MIGO(CHACK THE RADIO BUTTON FOR HIDE AGAINST THE REQUIRED FIELD).
By following path way you can hide the required fields in MIGO.
For J1IEX also there are options to hide the fields. I hope this will clear your issue. Thanking you.

How do i pass a value to Output field in a standerd screen...?

Hi all..
I have a developed a BDC program for User upload, I'm facing problem to pass a value to Output field..
Its Displaying Status Message as ZSHIPTO is not a Input field,
looking forward to hear from you all,
thanks in anticaipation,
full points will be awarded for usefull answer..
regards,
Sekhar.

just check in transaction whethere that field is an input field or not ( imean to say that field is in the display mode (gray field) or it is in change mode(input is accept).
also check for that particular field in the coding .
Thanks

How to get center alignment of Input/Output field in Module Pool

Hi Friends,
I am using Input/Output field in my Module pool program. Dynamically i am submitting the text to Input/Output field. What i want is i want to display the submitted text as center. By default It is displaying left aligned.
Thank U in advance.
Mahender.

Hi,
Use syntax "Centered".
take one variable push into the field
write w_variable1 to w_variable2 centered.
next push the varaible to Destination screen input/output Field .
Make sure the Field the Character Type.
Prabhud@s

SharePoint 2013: Hide/Show Column fields while uploading document in Document Library

Dear all,
I have created a document Library LIB001 and I have created One Column of type Choice, drop down list, (CCHOICE) and I have created 3 other columns, (Column1, Column2, Column3).
What I want is while uploading a file in the document library, when I choose a certain value from CCHOICE, i want to show/hide and/or make the column mandatory.
Can anyone help/guide me how to achieve this?
Many Thanks
Vinay

Dear all, I am trying the following code, but it's not entering the onchange of drop down list event. <script> $(document).ready(function () { var countryField = SPUtility.GetSPField('Document Type'); var countryFieldValue = countryField.GetValue(); alert
(countryFieldValue); // ----- Hide/Show the field based on new selected value. var id = SPUtility.GetSPField('Document Type').Dropdown.id; alert ('field ID: '+id); $('#' + id).on('change', function () { alert ('Inside on Change:'+countryFieldValue); if (countryFieldValue
== 'Type1') { SPUtility.GetSPField('Column1').Hide(); } else if (countryFieldValue == 'Type2') { SPUtility.GetSPField('Column2').Hide(); } }); }); </script> Can anyone help me please. Many Thanks & Regards Vinay

How to have default value in an output field?

Hi,
I am working on module pool program and want the initial value for a numeric data to appear by default in an Input/Output field.
How do I achieve the same?
Thanks.

Hi,
You have to write the code in PBO module.
or In the field attributes if check the from dictionary option it will display initial value by default.

Adhoc query-Problem with Personnel no output field

Hi Gurus,
We are trying to run an adhoc query using a customized Info set(PNPCE logical database).
While running the query,we had selected Personnel no(from Payroll status P0003 table) as output field and Company code(from Org assignment P0001) as input field in the selection.
Problem is in the output field we are seeing the Personnel name details in place of Personnel no.Could anyone please suggest what could be the reason behind this and how to fix it.
Your help will be highly appreciated.
Warm Rgds
Sushil

Hi Sushil,
The default output for fields with a text and a value (Name = text, PERNR = value) is the text. You can change this by right clicking on the output box in Ad Hoc and selecting "Value". If you want both name and number, select "Value and Text".
You can also change this default to Value from Text if in Ad Hoc, you go to Edit --> Settings. On the last tab, change the radio buttion for output default to Value from Text. This will change it for all fields so you would see the eight digit number rather than the name of the position or org unit. Thus, you may want to keep it at Text and use the right click to change specific fields as needed.
By the way, it is usually best to utilize the personnel number field from IT0000-Actions, although it can be obtained from any infotype if you include that field in the field group when creating your infoset.
Paul

Problem with adding output field in Bank Details(Infotype 0009)

Hi All,
I hav a criteria like, when i select a value for a field corresponding value should be displayed in input/output field just beside the selected field.
To make you understand the criteria more clearly.In infotype 0009 we hav Bank key.When we select a bank key corresponding Bank name is displayed just beside Bank key field.How to achieve that functionality.
Can anyone help please. Its urgent...
Thanks a lot...
Sandeep.

To make my question more clear.I have created a new field in bank details infotype.Similar to the field Bank key in 0009 Infotype.As soon as a select the Bank no through F4 functionality i want the Bank no no to be selected and at the same time i want Bank name to be displayed just beside this field.
In short with 1 selection i want both Bank no n Bank name to be selected.
If i hav ti write the code where should i write the code.I hav also created a structure .I presume i need to write a logic for this requirement.But i dont know where to write the logic.

How to send the edited output fields of an ABAP report into internal table

Hi,
I had edited the output fields of an ALV GRID report now how can i again update the fields of the internal table with this edited new data .
Please suggest me if any method or FM exists for this.
Thanks in advance
With Regards
Ajay

hi,
you have to use the following code in the user command
*&      Form command
*       TO HANDLE USER ACTIONS AGAINST PF-STATUS
*      -->UCOMM      text
*      -->SELFIELD   text
FORM COMMAND USING UCOMM LIKE SY-UCOMM SELFIELD TYPE SLIS_SELFIELD.
DATA : LV_OKCODE TYPE SY-UCOMM.
LV_OKCODE = UCOMM.
CASE LV_OKCODE.
    WHEN 'PROCESS'. "button
           selfield-refresh = 'X'.
ENDCASE.
ENDFORM.                    "command
hope this helps
Regards
Ritesh

How to control the output fields in ALV

Hi Pals,
I have a Z program which outputs around 400 characters length. It is working fine when we run in foreground(online).. But i have the problem with the length of the output of the report when i run in BACKGROUND mode. That is, only 255 characters are being displayed.
So, i have decided to supress some of the unwanted output fields being diplayed, so that the total output length becomes 255 characters.
How can i handle this situation in the ALV's?
Someone please send me some sample code.
Thanks in advance,
Ram.

Hi
   Better create the Layout Variants with the desired columns.
ALV is providing that functionality.
Use
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
    EXPORTING
      is_variant = alv_variant
      i_save     = 'A'
    IMPORTING
      es_variant = alv_variant
    EXCEPTIONS
      not_found = 2.
Regards,
Kumar

Hide a output field in FM

Similar Messages

Maybe you are looking for