Hide all tabs in Personal Number Search Help

Hi Experts,
In Assest Master AS01, there is a personal number field. When user click on search icon from this field, system has to show only newly added elementary search help tab and hide all standard elementary search helps tabs tagged to Collective Search help PREM.
Collective search help tagged to Personal number is PREM. I am able to hide all elementary search helps by adding some code in search help exit "HRMC_PREM_EXIT_A " and can see newly added search help. But with addition to this tab there is one more search help tab is apperaing. Name of the appered search help is "Free Search". I checked PREM but there is no any elementary search help with this name.
The reason behind adding new search tab is user should not see sensitive data and personal details.
Can anybody tell me how to hide this tab? Your suggation(any enhancement point) is highly needed for me.
Thanks in advance!
Regards,
Meera.

Hi,
In the P_Pernr object for field, AUTHC add M as well. Refer the below link for more detals.
http://help.sap.com/erp2005_ehp_02/helpdata/en/ef/4aba3b3bf00152e10000000a114084/content.htm
Regards,
Gowrinadh

Similar Messages

Previous version had save all tabs before shutting down,which helped a lot if u open same windows always,but this is not there in the latest version I have upgraded recently.Request you to guide me if this can be accommodated in the new version.

Previous version had save all tabs before shutting down,which helped a lot if u open same windows always,but this is not there in the latest version I have upgraded recently.Request you to guide me if this can be accommodated in the new version.

Firefox now always stores the old session which you can access by going to the History menu and selecting "Restore Previous Session".
If you always open the last set of tabs, an alternative approach is this:
# Click the orange Firefox button, then select options to open the options window
# Go to the General panel
# Change the setting "When Firefox starts" to "Show my windows and tabs from last time"

Authorization: Search help is showing all business partners

Hello,
Using FI-CA, the F4 searchhelp is showing all the business partners also the onces which have a special Authorization Groups assigned.
The search-result should only list the BPs without a special Authorization Group.
Is there any object I can use?
It works fine for Contract Account by using the oject F_KKVK_BEG but I'm afraid there is no one for BPs.
Do you have an idea?
Thanks,
Gellert
Edited by: Gellert Kovacs on Jun 2, 2009 12:37 PM

Hello Vanessa,
thank you very much for your answer. I think this can/will solve the problem. I have not tested yet because this will be a modification and I need approvals for that.
In the meanwhile I came across an other question, is there a way to limit the Search help for business partners? I do not want to allow user to search for bank details. Do you have any experience with limiting fields or whole tabs in the F4 search help especially for business partners?
Thank you very much + have a nice weekend,
G.

Tab in search help MM03 and VA03

Hi experts,
I added a new tab in matrn search help MAT1 (MM01/02/03) and it shows ok. But in VA01/02/03 item grid, the search help for matnr does not show the new tab.
VAs tcode use S_MAT1 search help, but MAT1 is in S_MAT1 as collective search help. Are there anythings to do?
How I add a new tab in VAs tcode search help in items grid for material???
Thanks in advance.

The item grid uses SD_MAT1 not S_MAT1 so there isn't a common collective search help where you can append your search help. Just append your search help to SD_MAT1 as well.

Search help Enhancement for the Material Number (MAT1 - Search help name)

Hi ,
In my Requirement if the user clicks on the Material Number Search help(eg in ME51N - T.code: Material )
It will shown a additional Search help along with the existing one.
That search help would have input parameter fields as Material Number , Material Group , Material description , Plant and storage location.
The output screen has to display the Available Quantity for the input material, plant and storage location.
The available quantity has to calculated from various Tables like mard , mssq etc.
My question is how to display the available quantity in the search help screen, i tried with search help exit but not successful.
I am displaying the remaining fields(except available quantity) using database view from different tables like Mara , Mard ,Makt.
where to write the Logic for the Available Quantity to display it in search help.
Thanks and Regards,
Prakash K

Hello,
if this search help is collective then you could delete standard single (SAP allows maintain collective search help with out object key registration) one and insert custom search help which has the same structure plus additional field.
best regards,

Idoc number from personal number in ECC

Hi All,
i am new to idocs ,please tell me how to get the idoc number using the personal number.

https://help.sap.com/saphelp_nw04/helpdata/en/d5/edf15ddcdc11d1890c0000e8216438/content.htm
01. Go to T code We09 or WE10
02.Give date range for Created on
03.Give direction : Inbound or outbound
04.Give basic Type/logical message/ Port etc ( If you know - for faster search )
05. Now next tab is Criteria for search in data record :--
a. You need Segment name : find out segment name from we02 thru some existing / known Idoc .
b. Field name : Fro WE02 can get this value
C. Once you know Segment and field name of personal number - enter all three values and execute.
You will get respective Idoc#
Hope this helps. Let us know if you need further input on this.
Best Regards/Rajesh

About search helps

Hi,
Can anybody please explain to me about search helps in details;i.e,both elementary and collective;with an example each??
Thanks in advance.
sumita

Hi Sumita,
Check this info.
Creating Elementary Search Helps
Procedure
In the initial screen of the ABAP Dictionary, select object class Search help, enter the name of the search help and choose Create.
A dialog box appears in which you must select the type of search help.
Select Elementary search help and choose .
The maintenance screen for elementary search helps appears.
Enter an explanatory text in the field Short text.
You can for example find the search help at a later time using this short text.
In the Definition tab page enter the selection method of the search help.
You can enter the name of a table or a view (database view, projection view or help view) here. If you enter a table that has a text table, the name of the text table is automatically entered in the corresponding field.
Using the input help (F4 help), select fields of the selection method as parameter in the Search help parameter area. Select the fields that should be used in the dialog box for value selection or in the hit list.
If the selection method is a table that has a text table, both the fields of the table and the fields of the text table are offered in the input help.
The data element of the parameter is automatically copied from the selection method. The data element defines the output attributes and the F1 help of the parameter in the hit list and in the dialog box for value selection.
You can assign the parameter another data element. To do so, select the Mod flag. The Data element field is now ready for input. Then select a data element with the input help (F4 help). Only data elements whose data type, length and number of decimal places is the same as those of the previous data element can be assigned.
This removes the link between the data element of the search help parameter and the data element of the selection method field having the same name. If you cancel the Mod flag, the data element of the assigned table field is used again.
Define the attributes of the search help parameters.
Select the IMP flag if it is an import parameter. Select the EXP flag if it is an export parameter.
You can define the dialog for the input help with the fields LPos, SPos and SDis. Enter the parameter position in the hit list in LPos. If you enter nothing or the value 0 here, the parameter is not displayed in the hit list.
Enter the parameter position in the dialog box for value selection in SPos. If you enter nothing or the value 0 here, the parameter is not displayed in the dialog box for value selection.
Set the SDis flag if the parameter should be a pure display field in the dialog box for value selection. The user is thus informed that the contents of the parameter restrict the value, but he cannot change this restriction. This makes sense for example when the parameter is an import parameter or if it has a default value.
You can assign the parameter a default value in the Default value field.
Select the dialog type of the search help.
The dialog type defines how the hit list is displayed in the input help.
Save your entries.
A dialog box appears in which you have to assign the search help a development class.
Choose .
Do not forget to link the search help to a screen field. The search help attachment is not part of the search help definition; it is part of the object definition to which the search help is attached.
Result
The search help is activated. You can find information about the activation flow in the activation log, which you can display with Utilities ® Activation log. If errors occurred during activation, the activation log is automatically displayed.
Other Options
Assign a hot key: If the search help is to be accessed with a hot key, you must enter a one-place ID in the Hot key field. All the elementary search helps contained in a collective search help should have different short cuts.
Assign a search help exit: In exceptions, you might have to change the standard flow defined by the search help with a search help exit. In this case enter the name of the search help exit in the corresponding field.
Test the search help: You can test the flow of an input help defined by the elementary search help with . A dialog box appears in which you can simulate the behavior of the search help under different conditions. You can obtain information about the options provided in this window with.
Creating Collective Search Helps
Procedure
In the initial screen of the ABAP Dictionary, select object class Search help, enter the name of the search help and choose Create.
A dialog box appears in which you must select the type of search help.
Select Collective search help and choose .
The maintenance screen for collective search helps is displayed.
Enter an explanatory text in the field Short text.
You can for example find the search help at a later time using this short text.
In the Definition tab page enter the parameters of the collective search help.
Select the Imp flag if it is an import parameter. Select the Exp flag if it is an export parameter.
Define the types for the parameters of a collective search help by assigning a data element. Enter the name of the data element that describes the contents of the search help parameter in the Data element field.
You can assign the parameter a default value in the Default value field.
In exceptions it could be necessary to change the standard process defined by the search help. You can implement the deviation from the standard using a search help exit.
In this case enter the name of the search help exit in the corresponding field.
On the Included search helps tab page, define the search helps that you want to include in the collective search help.
You can include elementary search helps and collective search helps.
Use the Hide flag to control whether an included search help should appear in the dialog box for selecting the elementary search help. If the flag is set, the search help is not offered.
It makes sense to hide search help inclusions if one or more search paths in the standard system should not be used in a concrete R/3 System. Similarly, search help inclusions can also be already hidden in the standard system because they only can be used meaningfully in a few R/3 Systems. You have to cancel the flag in this case.
Position the cursor one after the other on each allocated search help and choose Parameter assignment.
In the next screen, enter the parameter names of the elementary search helps to which the corresponding parameters of the collective search help should be assigned in the field Reference parameter.
You can select the parameters contained in the included search help using the input help. Create a proposal for the assignment with Proposal.
Save your entries.
A dialog box appears in which you have to assign a development class to the search help.
Choose .
Result
The collective search help is activated. You can find information about the activation flow in the activation log, which you can display with Utilities ® Activation log. If errors occurred when the collective search help was activated, the activation log is automatically displayed.
Do not forget to link the search help to a screen field. The search help attachment is not part of the search help definition; it is part of the object definition to which the search help is attached.
Other Options
You can test the flow of an input help defined by the collective search help with . A dialog box appears in which you can simulate the behavior of the search help under different conditions. You can obtain information about the options provided in this window with .
First create ELEMENTARY SEARCHHELP YSEARCH32 in R/3 Data dictionary
Create one more elementary search help YSEARCH33
Now define collective search help for the above 2 elementary search helps. In definition part include the search help parameters which you want to display in the search help.
Enter the included search helps i.e YSEARCH32,YSEARCH33.
Press the Parameter Assignment for search help BUTTON.You have to assign one parameter with the parameters in the definition part
Same case with the YSEARCH33.
Activate the collective search help.
Apply this search help in the program and if F4 button is pressed the collection of elementary search helps are displayed.
Creating dynamic search help means the f4 help will come on the context bases.
that will achieved with two function modules.
1. F4IF_INT_TABLE_VALUE_REQUEST Display internal table as search help (documented in SAP)
2.F4IF_*_VALUE_REQUEST
u will provide the search help on the field dynamically depending on program context.
REPORT ZTEST_F4HELP                              .
*---Report with selection screen and to display the list of
possible entries for field 'B' as per the value in field 'A'.
parameters: p_vbeln type vbak-vbeln,
            p_posnr type vbap-posnr.
at selection-screen on value-request for p_posnr.
data: begin of help_item occurs 0,
          posnr type vbap-posnr,
          matnr type vbap-matnr,
          arktx type vbap-arktx,
        end of help_item.
data: dynfields type table of dynpread with header line.
dynfields-fieldname = 'P_VBELN'.
append dynfields.
call function 'DYNP_VALUES_READ'
       exporting
            dyname               = sy-cprog
            dynumb               = sy-dynnr
            translate_to_upper   = 'X'
       tables
            dynpfields           = dynfields
       exceptions
            invalid_abapworkarea = 1
            invalid_dynprofield = 2
            invalid_dynproname   = 3
            invalid_dynpronummer = 4
            invalid_request      = 5
            no_fielddescription = 6
            invalid_parameter    = 7
            undefind_error       = 8
            double_conversion    = 9
            stepl_not_found      = 10
            others               = 11.
read table dynfields with key fieldname = 'P_VBELN'.
p_vbeln = dynfields-fieldvalue.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
       exporting
            input = p_vbeln
       importing
            output = p_vbeln.
select posnr matnr arktx into table help_item
                 from vbap
                      where vbeln = p_vbeln.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
       exporting
            retfield    = 'POSNR'
            dynprofield = 'P_POSNR'
            dynpprog    = sy-cprog
            dynpnr      = sy-dynnr
            value_org   = 'S'
       tables
            value_tab   = help_item.
Hope this resolves your query.
Reward all the helpful answers.
Regards

Append search help for MATNR

Hi Experts,
My requirement is i need to add new screen Tab in the Material Search help so that i can access that TAB in all F4 search help for all ECC screen where MATNR data element is being used.
Can you please give any idea how to do that.
Thanks.

What to do with this:Need to add the New tab in the Serach help for the Material Number.

Search help with new selection within if more than 500 entries

Dear all,
I created a new search help and this works fine ... If I compare my search help with a default search help from SAP, I have 1 small feature that not seems to work ... With the default one, it is possible to make a new selection within the search help by clicking on the arrow down :
If I look at my search help, I don't have the possibility to make a new selection :
Does anyone how this can be done ?
Thanks in advance !
Greetz,
Kurt.

HI,
Here are the general steps to get you started.
1. Identify the search help being used (on the ship-to-party field, F1 then Tech Info). I believe you want the collective search help SD_DEBI.
2. Create your own search help with the fields you want to use with SE11, like 'ZDEBI' as an example.
3. Append 'ZDEBI' to SD_DEBI. (Goto->Append Search Help).
4. Clean things up by "Hiding" the old search help. In the 'Included Search Help' tab of the collective search help SD_DEBI, there is a check box that you can tick to hide included search helps.

Collective search helps

how to create collective search helps.plz.

1.      In the initial screen of the ABAP Dictionary, select object class Search help, enter the name of the search help and choose Create.
A dialog box appears in which you must select the type of search help.
       2.      Select Collective search help and choose .
The maintenance screen for collective search helps is displayed.
       3.      Enter an explanatory text in the field Short Text.
You can for example find the search help at a later time using this short text.
       4.      In the Definition tab page enter the parameters of the collective search help.
Select the Imp flag if it is an import parameter. Select the Exp flag if it is an export parameter.
Define the types for the parameters of a collective search help by assigning a data element. Enter the name of the data element that describes the contents of the search help parameter in the Data element field.
You can assign the parameter a default value in the Default value field.
       5.      In exceptions it could be necessary to change the standard process defined by the search help. You can implement the deviation from the standard using a search help exit.
In this case enter the name of the search help exit in the corresponding field.
       6.      On the Included search helps tab page, define the search helps that you want to include in the collective search help.
You can include elementary search helps and collective search helps.
Use the Hide flag to control whether an included search help should appear in the dialog box for selecting the elementary search help. If the flag is set, the search help is not offered.
It makes sense to hide search help inclusions if one or more search paths in the standard system should not be used in a specific SAP System. Similarly, search help inclusions can also be already hidden in the standard system because they only can be used meaningfully in a few cases. You have to cancel the flag in this case.
       7.      Position the cursor one after the other on each allocated search help and choose Parameter assignment.
In the next screen, enter the parameter names of the elementary search helps to which the corresponding parameters of the collective search help should be assigned in the field Reference parameter.
You can select the parameters contained in the included search help using the input help. Create a proposal for the assignment with Proposal.
       8.      Save your entries.
A dialog box appears in which you have to assign the search help a development class.
       9.      Choose activate
Search Helps:
These are two types.
Elementary n Collective.
1) Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
2) Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
3)An elementary search help defines the standard flow of an input help.
4) A collective search help combines several elementary search helps. The user can thus choose one of several alternative search paths with a collective search help.
5)A collective search help comprises several elementary search helps. It combines all the search paths that are meaningful for a field.
6)Both elementary search helps and other search helps can be included in a collective search help. If other collective search helps are contained in a collective search help, they are expanded to the level of the elementary search helps when the input help is called.
pls reward points if helpful,
shylaja

Search Help Not show/display the data

Dear All,
              I have created a search help whith mannual itab of 4 entries. Itab is filled correctly, but when i see in the screen field it show the search help and display no record with the message 4 entries found; but I can't see the data.
pls. guide me what can be the problem
Thanks and Regards,
Sohail

Hi,
If you want to Show the Search help for Particular Field in Screen painter , You must give the Code In PROCESS ON VALUE REQUEST(POV).
ie.
process on value-request.
field P9611-REQ_STATUS module GET_REQ_STATUS.
and in Program Give the internal table Fieldname in Capital Letter while Passing in Fuctional Module.
like.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'REQ_STATUS2'    "internal table field
      dynpprog        = sy-dynnr
      dynpnr          = sy-dynnr
      dynprofield     = 'P9611-REQ_STATUS' "screen field name
      value_org       = 'S'
    TABLES
      value_tab       = req_status_tab "internal table
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc NE 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
With Regards
Kesavaperumal

Search help for SKAT-SAKNR OR SKAT-SAKNR is not working

Hi All,
I have created a Search Help for F4 in a dialog program for SKAT-SAKNR OR SKAT-SAKNR. While i click F4 on that field, it displays blank values.
Here is the module:
module HELP_FOR_SAPGL_ACC input.
CLEAR t_SAPGL.
SELECT SAKNR TXT20
    FROM SKAT
    INTO CORRESPONDING FIELDS OF TABLE t_SAPGL UP TO 1000 ROWS
    WHERE SPRAS = SY-LANGU.
   WHERE L_GL_ACC = v_FIELD_VALUE-FIELDVALUE.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
    DDIC_STRUCTURE         = ' '
      RETFIELD               = 'SAKNR'
    PVALKEY                = ' '
     DYNPPROG               = PROGNAME
     DYNPNR                 = DYNNUM
     DYNPROFIELD            = 'SKA1-SKANR'
    STEPL                  = 0
    WINDOW_TITLE           =
    VALUE                  = ' '
     VALUE_ORG              = 'S'
    MULTIPLE_CHOICE        = ' '
    DISPLAY                = ' '
    CALLBACK_PROGRAM       = ' '
    CALLBACK_FORM          = ' '
    MARK_TAB               =
IMPORTING
    USER_RESET             =
    TABLES
      VALUE_TAB              = t_SAPGL
    FIELD_TAB              =
    RETURN_TAB             =
    DYNPFLD_MAPPING        =
EXCEPTIONS
    PARAMETER_ERROR        = 1
    NO_VALUES_FOUND        = 2
    OTHERS                 = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endmodule.
In the above code I am selecting 1000 rows from SKAT table and in the Search Help Popup it is also displaying 1000 rows but all are blank.
Please help me.
Regards,
Avaneet

Hi check my weblog on search help exit codeing..
https://wiki.sdn.sap.com/wiki/x/du0
\* Prepare for output
CALL FUNCTION 'F4UT_RESULTS_MAP'
TABLES
shlp_tab = shlp_tab
record_tab = record_tab
source_tab = lt_result
CHANGING
shlp = shlp
callcontrol = callcontrol
EXCEPTIONS
illegal_structure = 1
OTHERS = 2.
IF rc = 0.
callcontrol-step = 'DISP'.
ELSE.

Problem in Search Help Exit

Hi Experts,
I have aproblem in Search help Exit. I have added tab to the standard search help by creating elemntry search help and assigned that search help to standard search help. I am calling function module for search help exit. I dont have any selection method.
I am getting the epected results by using the funtion module F4UT_RESULTS_MAP. This funtion module displays all the results list. My only problem i have is when i select the value from the results list the value is not populating in to the field.
CALL FUNCTION 'F4UT_RESULTS_MAP'
    TABLES
      shlp_tab          = shlp_tab
      record_tab        = record_tab
      source_tab        = lt_export
    CHANGING
      shlp              = shlp
      callcontrol       = callcontrol
    EXCEPTIONS
      illegal_structure = 1
      OTHERS            = 2.
The callcontrol-step = 'RETURN'.
how can i handle this step to populate the select record in the field.
Thanks,
Edited by: FRANCIS REDDY on Jun 11, 2008 5:42 PM

Hi check my weblog: https://wiki.sdn.sap.com/wiki/x/du0

Vendor Search Help

I have a user that is requesting that Vendor PO Box and PO Box ZIP Code be added to the Vendors by Address Attributes tab in the Vendor search help screen.
Any ideas with where to start?
Thanks!

Hi Barth,
That was over an year ago. I hardly can remember what I had for lunch yesterday. Well, actually yesterday is easy because I have Mexican every Sunday.
Anyways, try setting a break point in the FM I mentioned. It shouldn't be too hard to debug. And it will answer two questions, if it is actually where the vendor is being fetched, and what is going on.
If all else fails, open a new thread explaining what you've done and what the results are, as this topic has been closed.
Good luck.
Best,
Bruno

How to create SELECT-OPTION in search help (search) field

Hi All,
We have created a search help using Help view as selection method.
But, we want to have a SELECT-OPTION for one of the search parameters. How do we implement the same ?
Regards,
Ashish

hi
try this
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
    TABNAME                   = 'YRJEMPDETAIL'
    FIELDNAME                 = 'L_NAME_LOW'
*   SEARCHHELP                = ' '
*   SHLPPARAM                 = ' '
   DYNPPROG                  = 'SAPMZRJ_HELP'
   DYNPNR                    = '9000'
   DYNPROFIELD               = 'LAST_NAME_LOW'
*   STEPL                     = 0
*   VALUE                     = ' '
*   MULTIPLE_CHOICE           = ' '
*   DISPLAY                   = ' '
*   SUPPRESS_RECORDLIST       = ' '
*   CALLBACK_PROGRAM          = ' '
*   CALLBACK_FORM             = ' '
*   SELECTION_SCREEN          = ' '
* IMPORTING
*   USER_RESET                =
* TABLES
*   RETURN_TAB                =
* EXCEPTIONS
*   FIELD_NOT_FOUND           = 1
*   NO_HELP_FOR_FIELD         = 2
*   INCONSISTENT_HELP         = 3
*   NO_VALUES_FOUND           = 4
*   OTHERS                    = 5
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
    TABNAME                   = 'YRJEMPDETAIL'
    FIELDNAME                 = 'L_NAME_HIGH'
*   SEARCHHELP                = ' '
*   SHLPPARAM                 = ' '
   DYNPPROG                  = 'SAPMZRJ_HELP'
   DYNPNR                    = '9000'
   DYNPROFIELD               = 'LAST_NAME_HIGH'
*   STEPL                     = 0
*   VALUE                     = ' '
*   MULTIPLE_CHOICE           = ' '
*   DISPLAY                   = ' '
*   SUPPRESS_RECORDLIST       = ' '
*   CALLBACK_PROGRAM          = ' '
*   CALLBACK_FORM             = ' '
*   SELECTION_SCREEN          = ' '
* IMPORTING
*   USER_RESET                =
* TABLES
*   RETURN_TAB                =
* EXCEPTIONS
*   FIELD_NOT_FOUND           = 1
*   NO_HELP_FOR_FIELD         = 2
*   INCONSISTENT_HELP         = 3
*   NO_VALUES_FOUND           = 4
*   OTHERS                    = 5
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
hope this helps
Regards
Ritesh J

Hide all tabs in Personal Number Search Help

Similar Messages

Maybe you are looking for