Hide button of notification create in IW31

I have a requirment where users should never create a notification directly from the header of the serviceorder but from the notification.
I can hide the notification field on the header of the serviceorder with OAIN but the button to create a notificitation is still there ?? very weird a button there all on it's own with no reference anymore
is there a possibility to hide the button to create a notification also from the screen of iw31 ??
kind regards
arthur de smidt

>
SujitSND wrote:
> Hi
>
> go to
>
> spro->Plant maintainance & Ser->maintan & service orders>define field selectuion for Order Header->Field Selection for Order Header Data and Reference Object->Notification>Hode radio button.
>
> Try thus will help.
>
>
> Regards
> Sujit gujar
?? I don't see where I can hide the create button with this can you perhaps elaborate more ?? and as told I already followed this procedure to hide the notification field but still somewhere lonely on the screen remains the create button which I want to hide !!
transaction variants is something that I have to create a new transaction for. if done I also have to rewrite all the manuals etc etc and make new authorisations. If possible it is something I try to avoid since it would become confusing if someone has to use for some ways IW31 and for others the transaction variant. I can't block IW31 totally for use.
I also tried SHD0 but I can switch off a lot of buttons but not the button for the creation of a notification
kind regards
arthur de smidt
Edited by: A. de Smidt on Mar 13, 2009 11:42 AM

Similar Messages

I want to Hide ok buttom and reassign button in notification page

HI
How to Hide ok button and reassign button in notification page using oracle workflow builder
Thanks and regards
ch sai vikram

I do not believe you can achieve this using WF Builder - you will instead need to use OAF Personalization. See these MOS Docs for examples
727315.1 - How To Do the Personalization on the Salary Page (Hide CORRECT Button)
758795.1 - How To Hide The Add Transaction List, Print And Recalculate Buttons Through Personalization?
HTH
Srini

Hiding button in notification Page.

Hi All,
I have to hide the 'Approve' button from Notification Page. Is it possible to do it?
Pl. help.
Thanks in Advance.
Regards
Mano

Hi,
That doesn't make sense as a requirement.
You are sending a notification to someone, asking them to either approve or reject the notification, but you want to suppress the "Approve" button, so will only be giving them the option to reject???
If that's what you want to achieve, then create a custom lookup which only has a value of "Reject", and use that as the response value.
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://www.workflowfaq.com/blog ?
WorkflowFAQ support forum: http://forum.workflowfaq.com

Notifications created as follow up action from a notification????

Hi all,
            I am creating a Quality Notification as a folloup action of a MAintenance Notification.
            The Quality Notification is craeted in the background.
            Now I want which are the Quality Notifications created from a Maintenance Notification.
           In short I want the relation between Reference Notification and Notification created as Followup Action.
          How I can see the notifications creted with reference to current notification in IW220r IW23.
          Also how I can see which is the reference notification for current notification in IW22,IW23.
With best regards,
Narendra

Hi,
In IW22 or IW23 click document flow button or press CTRL+F4 you can get both PM & QM Notification no.
In QM notification you can see the PM notification no. as reference.
Regards
Chandru

Hide Task Bar , Hide all windows notification , Set screensaver

Hello,
Can any one please help me in doing any one or all the customization in
Windows 7x86 Embedded satndard.
How to hide Task bar permanently ?
How to set specific logo as screensaver ?
How to hide all windows notification ?
I have to do all these setting through MDT and want to include that in base image (Core Image). If you know any thing how to do any of the above settings in
Windows 7x86 Embedded Standard please reply .
If you how to do that in MDT via unattend.xml or registry or
GPO or any thing by which we can do these setting and deploy through MDT.
PLEASE HELP!!!

What I did was to provide the Notifier stage with an owner. (This is only a solution if your application has a single stage.)
1. In method initGraphics() remove the line: stage.show();
2. Create the following method in Notifier:
public static void setStageOwner( Stage stageRef )
INSTANCE.stage.initOwner( stageRef );
3. In method showPopup( Notification ) add the following line before: POPUP.show( stage );
if ( ! stage.isShowing() ) stage.show();
else stage.toFront();
4. When you setup your application's stage call:
Notifier.setStageOwner( yourAppsStage );

How to hide button in fb60 by transaction variant.

Hi experters,
I want to hide button some buttons in transaction code: fb60 by transaction variant(SHD0)
transaction code: fb60, input some date,
and then click simulation button,
then go to the simulation screen,
I want to hide some button on this screen,
but I find it is impossible to hide it.
because when I click enter button, there is no response ,
there is no screen popup, so I cann't hide any field or button with transaction variant.
Please help me...
Regards,

Thanks .
I want to use transaction variant to hide that button,
I tried using transaction variant, I have created transaction variant on initial screen's variant of fb60,
but I found I can't recored that screen of simulation screen.
can any one have any idear??
Thanks.
Edited by: harry wang on Jan 7, 2009 5:43 AM

Why do show/hide buttons show when PDF is opened?

I've created an interactive PDF with a series of show/hide buttons with rollover actions. When I export and open the PDF, some of the target buttons show up. If I mouseover, they correct themselves and go to their correct hidden state until I mouseover. Is this a bug and is there any way to keep them hidden from the start? Note that the target buttons overlap some, and I'm wondering if that is part of the problem so I'll test that, although not having them overlap isn't a viable solution.
Thanks!

Thanks for the response. Hidden until triggered was checked. I rebuilt the buttons and they seem to work fine now. It seems like InDesign is very finicky about the order of operations.

HIde button on events

Hi,
Can some body elaborate how to hide buttons on events.
Regards
Sameer

Hi,
You can use PPR.
Step 1. create a VO which contains one transient attribute of type boolean
Step 2. Base button rendered property using SPEL
Step 3. Initialize your VO for PPR(inintialization includes insertion of one row and set the attribute as True)
Step 4. In the event handler where you want to hide button just set it false.
Sample code:
//Code to hide button
public void handlePoApproveChangeEvent()
// Get the special, single-row application properties and make the first
// (only) row current.
OAViewObject vo = (OAViewObject)findViewObject("SampleBrowserPVO1");
OARow row = (OARow)vo.first();
// Get the value of the view object attribute with the PO Approval
// status.
OAViewObject poVO = (OAViewObject)findViewObject("PurchaseOrderHeadersVO1");
OARow poRow = (OARow)poVO.getCurrentRow();
String status = (String)poRow.getAttribute("StatusCode");
// Set the application property values based on the PO Approval
// status value.
if ("APPROVED".equals(status))
row.setAttribute("HideButton", Boolean.FLASE);
//Code to initialize VO
public void initializePPRExamplePage()
// Create purchase order header
OAViewObject appPropsVO =
(OAViewObject)findViewObject("SampleBrowserPVO1");
if (appPropsVO != null)
// If the VO already has a row, skip its initialization. Note that
// calling getFetchedRowCount() won't perform a DB hit on a VO with
// no SELECT and only transient attributes.
if (appPropsVO.getFetchedRowCount() == 0)
// Setting the match fetch size to 0 for an in-memory VO
// prevents it from trying to query rows.
// Calling executeQuery() is a small workaround to a known
// BC4J issue that ensures that modified rows in this
// transient view object are not lost after commit. See
// View Objects in Detail for additional information about
// both of these calls.
appPropsVO.setMaxFetchSize(0);
appPropsVO.executeQuery();
// You must create and insert a row in the VO before you can start
// setting properties.
Row row = appProposVO.createRow();
appPropsVO.insertRow(row);
// Set the primary key value for this single-row VO.
row = (OARow)appPropsVO.first();
row.setAttribute("RowKey", new Number(1));
row.setAttribute("HideButton",Boolean.TRUE);
// Initialize the application properties VO (and the UI) based on the
// default PO approval value set on the underlying object.
handlePoApproveChangeEvent();
else
// throw exception
} // end initializePPRExamplePage()
SPEL Parameter:
${oa.myVOName.HideButton}
Hope this help, Please refer JDeveloper guide for Topic Dynamic User Interface.
Regards,
Reetesh Sharma

Interactive PDF show/hide button not working properly

I could use some help. I'm creating an interactive pdf using show hide buttons. A button is set to hidden and a second button controls it's visible on mouse enter and mouse exit. Sometimes these buttons which are set to visible turn to invisible in the general/form field propery window and stop working. I've tried replacing the buttons with new ones, but this hasn't helped. Is this a bug or do you think the document is corrupt. This is a large prototype file which has to be shown to a client and rebuilding it is not a welcome thought.
Is there a way to program this using java to create this function? (I'm a Java novice.)
Thanks

HI PAUL, WE HAVE HAD THE SAME PROBLEM. SO, IF YOUR USING INDESIGN CS2 OR 3 WE HAVE FOUND THAT BY MAKING A NEW BUTTON WITH ALL THE ACTIONS YOU WANT IN A NEW DOCUMENT ON THE MASTER PAGE AND THEN COPYING AND PASTING THE NEW BUTTON INTO YOUR ORIGINAL FILE ONTO THE PAGE MASTER THIS USUALLY SOLVES THE PROBLEM.

Firefox "Hide" button issue

Hey everyone,
I'm using RoboHelp Office X5.02 and I'm experiencing the
issue in Firefox in which the Webhelp "hide" button doesn't
display. I found a response to this issue last year, and it said to
find and edit the "whtbar.js" script in C:\Program Files\RoboHelp
Office\RoboHTML\WebHelp5Ext\template_skin and
\template_skinpreview\template_skin so that the line that contains
"else
if(sType==”hide2”&&(!gbNav4)&&(!gbOpera))"
is shortened to just "else if(sType==”hide2”).
So I made the fixes in these directories AND in the folder in
which I published the output. However, when I regenerate the
output, the whtbar.js file reverts back to the original file, even
though I changed it in the RoboHelp directory.
I KNOW this fix works because I did it once before in another
help project, which has been republished several times since (and
the hide button still displays in Firefox)
Why wouldn't my changes "stick" this time? What should I
check or do differently?
Thanks,
Jim

Jim,
Use the old tried-and-true method of copying whtbar.js to
another directory, then copying it over the file created by
RoboHelp during regeneration. I have several files like that
(hacked) and I keep them in a separate folder and do the paste
first thing after building the help. RoboHelp overwrites changes to
most files when it runs.
HTH,
Chris

Add a custom button on notification page and open a oaf page after button

Hi All,
My Requirement is add a custom button on notification page and after button click with take some parameter from notification page like supplier_id and org_id then open a new oaf page and show supplier credit and debit balance but problem is that button is only enable to a ap invoices notification not for other type of notification.
how to take approach/action i don't know.
it is possible through OAF personalization/customization or it is part of work flow customization.
Navigation path - payable->worklist->open notification and Type of notification also there
Type should be matched with AP_Invoices type notification then custom button enable.
Please Let me know is it possible or not. If possible how to achieve this. ...................................it's argent...plz help me
Edited by: 815572 on Nov 25, 2010 1:15 AM

Hi Irk,
My notification came in given below format (in table) but my custom button only enable for Contract Approval Type not for others..........i hv attach a button on notification page (subject-Contract 21969-R17......)
From Type Subject Sent
Taylor, Phillip Contract Approval Contract 21969 - R17-AUG-07 06:19:27 has been approved by Taylor, Phillip 22-Aug-2007
Taylor, Phillip OKS Contract Process Contract 21975 - R17-AUG-07 06:22:18 for AT&T Universal Card (52,500.00 USD) has been published online 19-Aug-2007
Taylor, Phillip OKS Contract Process Contract 21969 - R17-AUG-07 06:19:27 for AT&T Universal Card (15,000.00 USD) has been published online 19-Aug-2007
If I just put a button SHOW BALANCE just like notification button APPROVE, REJECT, REASSIGN but this button shows all types of notification and my req. is this button show only for Contract Approval type notification. how to handled this issuesss ?
if extend the co of notification page then how to handle TYPE value from worklist page ....please write proper code if u hv any idea...........
Thanks,

Hide Button in Applications WD ABAP Travel Standard

Dear Experts.
Please Someone can help me with suggestions for the following issue that I have in this moment:
I need hide the button "Entrada Nueva" "New Entry" for the component[ fitv_vc_advances|http://img842.imageshack.us/img842/2719/fitvvcadvances.png]
I found that this is posible using the t.code FITVFELD_WEB that controls the input fields within the portal.
But I am checking and I don't find this with this t.code for hide this button.
Thanks in advance,
Regards
Carmen G

Hi,
are you using ESS in portal?
you can hide button through iView
choose iView form Content Management, then preview.
press "Ctrl" button (@ button you want to hide) combine with right click of your mouse, then you can set the button invisible.
hope it helps

CHM buttons are not localized in a French project (shows English Contents, Index, Search, Print, Hide buttons)

I opened an old WinHelp project into my new RoboHelp 7. When
I generate the CHM, even with the Project Settings in RoboHelp set
to French and running in a French Windows operating system (MS
Windows XP Pro 2002 SP 2), the CHM output is still in English. The
buttons display in English (Contents, Index, Search, Print, Hide
buttons). The title bar of the CHM also says "HTML
Help" even though the project title in the Project
Settings is "Aide en ligne...".
My Windows Regional Settings through the Control Panel -
Regional Options tab is set French (France). On the Languages tab I
under Text Services and Input Languages, Details button, I selected
French (France) French. On the Advanced tab I selected French. Then
I rebooted.
On the language bar on my Task pane, I selected FR. The CHM
still displays in English.
Please help! I have to produce 4 CHMS in languages other than
English today.
Thanks!

GinaL, would you be able to give us an update? Did the CHM
files look ok on a PC with a true French OS installed?
To avoid having to rewrite everything, I've written the
following info/instructions for my team -- though I'm not yet sure
they're 100% correct:
After I reported this issue to Adobe, they worked on the
problem for several days. They even sent me a new
HtmSingleSourceHtmlHelp.dll file that was supposed to solve the
problem. But it didn't work correctly. No matter what contortions
we put ourselves through, we couldn't get both of these items
correct in the CHM file at the same time, namely:
Index compiled in correct alphabetical order accdg to the
language of the help project.
Correctly translated help title showing in the caption,
regardless of the user's Windows regional settings. (For example,
we wanted "FORMS-Hilfe zu FORMS 5-3" to appear as the caption of
the German version of FORMS help, even if our regional settings
were set to English.)
I think we'd all agree that the index has to be in
alphabetical order. So from what I've seen, this is what we have to
do when compiling a non-English version of help using RH7:
1. Set up the project with the foreign name.
2. Set the language in the project settings. And in the
Project Settings dialog, click Advanced and check out the LNG File
tab to make sure it's using a translated version.
3. Ensure that the Window Caption setting is correct in each
window included in the project. (On RoboHelp's Project tab, open
the Windows folder, double-click each window in turn, and check the
settings.)
4. Set the Language setting in the HHP file to Language=[hex
value for that language]. I found a bunch of them listed on this
web page. Someone else might be able to find a better source:
https://svn.origo.ethz.ch/scoop/es_scoop_60/library/i18n/locale/nls/i18n_nls_lcid_tools.e
5. Change your Windows regional settings to the same language
as the help project. (Reboot if prompted.)
6. Recommended, for safety's sake: Delete the CPD file.
7. Open the project and compile using RH7.
8. Check the index's sort order -- is it in alphabetical
order according to the language of the project?
9. Check the help caption -- make sure it's not "HTML Help".
Note: Any customized buttons in your CHM should appear
correctly translated, but other buttons (Contents, Index, Search)
still appear in English -- at least they do on my PC, even though I
did step 2 above. We need to check whether those buttons appear
correctly when the PC is actually running a true foreign version of
Windows, and not just with temporarily adjusted Windows settings.
OR -- is anyone else able to get these to appear translated in the
CHM file?
Does anyone have anything to add? Other solutions? Easier
procedures? Better results to report?
Thank you
Eileen

Everytime I open a website apart from popular ones, firefox shows ads with open/hide buttons which are not served by the website actually. What to do?

if i could show you a screen shot.... that would have cleared the situation. ads show up in left bottom corner with open/hide button in a frame. and the same ads show up in every html plugin on the webpage especially in facebook social plugins. however on google, mozilla, facebook, twitter there comes no ad like this. Its very annoying. I recently uninstalled firefox for the same reason but nightly is having the same problem. and let me tell you there is no such thing in other browsers like chrome and i.explorer. I like firefox i dont want to change it but i will have to if the problem persisted. :( please help.

hello, can you try to replicate this behaviour when you launch firefox in safe mode once? if not, maybe an addon is interfering here...
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
please also run a full scan of your system with the security software that you have in place and different other tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] & [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner].
[[Troubleshoot Firefox issues caused by malware]]

Notification Create time in PCO 2.1

Hello,
I am using PCo 2.1.6.0 and I have observed a difference of 4 hrs between the Notification Create time and the time zone where actually PCo is installed.
In my current scenario both PCo & the data source (OSI PI) are installed on the same server which follows the EDT/EST time zone.
The notification message create date that is sent to MII (which also resides in the EST/EDT TZ) show a + 4 hrs (I think it shows GMT). I observe the same time when I do a "Test Notification Delivery" --> "View Sample" for a notification.
On the PCo Mgmt Console if I navigate to Tools --> Options and further expand Global Properties and click Date/Time format the correct time is displayed.
Additionally if I run a TAG query against the same Agent the correct time is returned.
Why is there a difference for the notification then, when everything is in the same TZ? Am I missing some config setting in PCo?
I have not come across any SAP note on this issue and could not find any older posts referring to this behavior.
Thanks for the help.
Udayan
Edited by: Udayan Upreti on Sep 19, 2011 9:30 AM

Ud,
Ok, so to fully answer your original question as to why there is a difference in the timestamps of a PCo notification and a MII Query to a PCo agent.
The notifications always use UTC which is universal time regardless of timezones or system settings and was agreed upon as the best approach to keep track of when messages were actually created. If you want current timestamp of the server in the message payload you can add an Expression with the value of "datenow()" and I believe that this will give you the current timestamp of the PCo server.
When you query a PCo agent from MII, the MII Time Engine will take care of the timezone conversion for you in order to ensure that date from the proper time ranges the user is asking for is returned to them. Since the MII and PCo servers can be located in diffferent regions/timezones we have to handle this in our time engine.
Does this make sense?
Regards,
Sam

Hide button of notification create in IW31

Similar Messages

Maybe you are looking for