Hide certain nodes in a hierarchy in report

Hello all,
I am having a repport where in I am using a hierachy. There are totally 8 nodes under the root (parent) node. The requirement of the report is to show only two nodes out of it the 6th node and the 8th node.
Is it possible if yes can someone guide me how?
Thanks in advance,
K M

Hi,
You can restrict the hierarchy with these two nodes.
Right click on the characteristic>properties>select required hierarchy-->ok
again right click on char>restrict>here ylou can restrict the hierarchy with required node by moving them to right window.
regards
Message was edited by: Murali

Similar Messages

How to hide root node of hierarchy?

Hi,
can anyone give me a hint how to hide the root node of a hierarchy?
Thank you very much in advance, best regards
Frank

Hi Frank,
Another way would be to restrict the hierarchy in the query definition. Select all nodes, except the root. You can do the same in excel and save the query as a view. Of course, you have to maintain this selection every time the hierarchy gets new nodes.
Natali

Show all nodes in a hierarchy

Hi all,
I am working with a report where I am showing a hierarchy. I am wondering if it is possible to see all nodes in the hierarchy, that is even if some nodes do not contain data. By default only the nodes that contain data are displayed. How do I show all nodes in BI 3.5?
Thanks in advance!
CL

Hi CL,
You can try following.
Make sure you have some data in say KF A for the each node even if it is zero in the cube on which you are creating report Add this KF A to your query and Hide the KF. Make sure you do not have any restrictions to this KF A.
I just took example KF A . This can be any of your KF in the cube or a Calculated KF,
Jaya

Hierarchy in Reporting Agent setting

Hi,
I have partner profit center (PPC) as a reference object of Profit ctr(PC). I have 2 hierarchies on PC.
I am using those 2 in a query. (One with PC and one with PPC.)
The problem is here:
I have a reporting agent setting on this query. I use PC and PPC in it along with their respective hierarchies.
But the hierarchy on PPC always shows the leaf nodes as output in the spool no matter what level I maitain. I want to have a higher level but certainly not the lowest level (leaf nodes).
The hierarchy which i use in PPC is recently created. Has it something to do with the masterdata where is brings from or with the reporting agent setting itself.
Please help with this.

Hello Aarthi,
Have you checked the dataprovider contains the negative values.
Do a list Cube on the multiprovider and confirm it.
Have you defined single exception for both or seperate exception. If 2 then check whether exception is active?
Thanks
Chandran

Allow user to type in the Hierarchy node value in Hierarchy node varaible

Hi Experts,
We are presently on NW2004s SP8 and we are moving on to SP10.
We got the requirement in reporting...
1.To allow the user to type in the Hierarchy node value in Hierarchy node variable manually.
2. When user typing the Hierarchy node value into the Variable prompt, bring subtree by default.
By default Hierarchy node variable prompt is grayed out and the user can only select the values from Input help(F4).
I have put forward an SAP message on this topic earlier and got a reply that the manual entry of hierarchy node is not possible and there is no work around. User needs to select it from HELP. This is because the node value must be in a certain format which the users may not know.
I just want to know from u Experts... is there any new feature available in SP09/10 or is there any other way to satisfy this requirement ?
Thanks in Advance.
Regards,
Aparna

We are able to manually enter in a hierarchy node in the selection screen. The selection screen is not grayed out.
We are currently on SPS 009, but one difference could be that we are on a Bex 3.5 Patch 10 front end.

Use hierarchy in report

hi guys,
I want to make a financial report using hierarchy from R/3.
but there are some missing node from R/3 and I want to add it in BW
Exp :
Hierarchy at my R/3 is like this :
revenue
cogs
operating expenses
etc...
where I want to have report like this :
revenue
cogs
--gross profit ( revenue - cogs )
operating expenses
etc...
please advice on how to add --gross profit in my BW report
regards,
-dedys

Hi,
If you want to use hierarcy and hierarchy properties in your query it is impossible to add these kind of calculations in hierarchy.
But if this hierarcy is just for classification and your nodes are fixed, then you can create restricted key figures for each node coming from hierarchy and you can create formulas with using this key restricted keyfigures.
Creating Restricted Key Figures:
1. In the InfoProvider screen area, select the Key Figures entry and choose New Restricted Key Figure from the context menu (secondary mouse button).
If a restricted key figure has already been defined for this InfoProvider, you can also select the Restricted Key Figures entry and then choose New Restricted Key Figure from the context menu.
The entry New Restricted Key Figure is inserted and the properties for the restricted key figure are displayed in the Properties screen area.
2. Select the New Restricted Key Figure entry and choose Edit from the context menu (secondary mouse button).
The Change Restricted Key Figure dialog box appears.
You can also call the Change Restricted Key Figure dialog box from the Properties screen area by choosing the Edit pushbutton.
You make the basic settings on the General tab page.
Underneath the text field, to the left of the Detail View area, the directory of all objects available in the InfoProvider is displayed. The empty field for defining the restricted key figure (Details of the Selection) is on the right-hand side of the screen.
3. Using drag and drop, choose a key figure from the InfoProvider and restrict it by selecting one or more characteristic values. YOU WILL SELECT YOUR HIERARCHY FOR YOUR CHARACTERISTIC HERE
4. Make any necessary settings for the properties of the restricted key figure on the other tab pages.
5. Choose OK. The new restricted key figure is defined for the InfoProvider.
Creating Calculated Key Figures:
http://help.sap.com/saphelp_nw04/helpdata/EN/13/e072abaddb574284d22361f0b824bf/content.htm
This is a way to include calculations and hierarchy nodes coming from R/3 together.
Hope this helps...

How to hide certain photos in aperture

hello everyone,
i am trying to hide certain photos from my huge library that my clients should not see accidentally for privacy reasons.
some photo-managers offer this ability but in aperture i didn't figure it out how to do it.
i found a workaround on the web, to rate those photos as 'rejected' and to set the filters down a notch to display everything but the 'rejected'.
that kind of works till i quite aperture. after starting aperture up again, the rejected photos show up.
i would have to set up the filters again to hide them.
this is not what i need.
has anybody a better and more reliable idea?
thx

hurgaaA wrote:
i still miss a simple 'hide' button in this application.
and, not everything you wanna hide is because of mummy..
there's something called privacy still and those files i'm talking about can be very innocent, but i wouldn't want to show them to you accidentally.
Unless you allow your clients to freely browse your library it's fairly easy to avoid showing unwanted pictures. The first thing I do before a sitting with a client is use the Favorites function: I select the client's project in the library pane, click the gear icon and choose Add to Favorites. Then I click on the looking glass icon in the search field and select Favorite Items — the client's project becomes the only one visible.
This works for me because I don't use this function for anything else, which means I enable and disable Favorites as needed for this purpose.
But the only reason I do this is to get a cleaner interface during a client sitting. If I didn't all the client would see is the names of my other projects and/or clients. He/she would never see the other pictures unless I selected one of these other projects myself or for some reason decided to browse through all my photos, which I would never do.
You say " i would have to set up the filters again to hide them. this is not what i need."
Filters for albums, folders and projects are sticky and will remain active until you disable or change them. Even between restarts. For instance, I organize my library with yearly folders as the top hierarchy but always add the 3 stars and above filter to those folders. If I click back to the 2007 folder it still has that filter enabled. This ability is extremely powerful, much more than a simple hide function because you can control visibility from a whole range of criteria.
To cut this short: the only time your clients would see photos that don't concern them is if you use the Photos or Projects sections of the library pane when you have someone sitting beside you.
I personally wouldn't do that

Show/Hide certain items in an array of clusters

I am trying to figure out how to programmatically show/hide certain items in a cluster (specifically an array of clusters). I tried a couple of things but nothing worked for me. On a similar note, I would like to be able to programmatically hide certain columns in a table. I can’t figure it out and the postings on the LabVIEW forums here were either not terribly helpful for my situation or maybe I just didn’t understand them. I have attached a vi where I tried to hide items within the array of clusters. Maybe someone could point out why it didn’t work and hopefully they could provide a solution or direction for me to follow. Thanks in advance…
Solved!
Go to Solution.
Attachments:
make column hidden.vi ‏15 KB

Creating a property node directly to the cluster element is far easier. pcardinale essentially shows this.
As for the question regarding the table columns, there is no direct way to hide the table columns, viz-a-viz Excel. The closest you can get is to set the column width to zero, as shown in attached example.
Attachments:
hide table columns.vi ‏13 KB

Hide certain characteristic properties

Hello,
We have web reports which have 'Display Characteristic Properties' enabled in the templates so it displays on the context menu. When the user clicks on the 'Properties' of a characteristic, it displays ALL the attributes of that characteristic. However, we want to be able to hide certain attributes from the Properties selection, although keep them as an attribute of the characteristic. Eg, We have 0EMPLOYEE which has an attribute 0DATEBIRTH. But we do not want the users to be able to select this attribute from the Properties option and display it. Is it possible to restrict the attribute list somehow? Thanks, Linda

Hi,
I believe you need to limit the access by using authorizations. You need to make the attributes relevant for authorization and grant authorization to the users you want.
Check this link:
http://help.sap.com/saphelp_bw33/helpdata/en/6b/ebb3ac244f11d5b2e30050da4c74dc/content.htm
Hope it helps,
David.

How to hide a node with no children in ADF Tree after Search

Hi,
I have a tree component with Search in my screen.
I followed http://www.jobinesh.com/2010/01/search-by-child-attributes-on-tree.html to implement search.
Search is performing on the childnodes, once the search is done I am expanding all the nodes and displaying only the filtered records.
my code to expand all the nodes :
public void expandAllTreeNodes() {
UIXTree tree = getGroupTree();
RowKeySet disclosedRowKeys = new RowKeySetTreeImpl(true);
CollectionModel model = (CollectionModel)tree.getValue();
JUCtrlHierBinding treeBinding = (JUCtrlHierBinding)model.getWrappedData();
JUCtrlHierNodeBinding nodeBinding = treeBinding.getRootNodeBinding();
List<JUCtrlHierNodeBinding> childNodes = nodeBinding.getChildren();
if (childNodes != null) {
for (JUCtrlHierNodeBinding _node : childNodes) {
disclosedRowKeys.add(_node.getKeyPath());
disclosedRowKeys.remove(_node.getKeyPath());
tree.setDisclosedRowKeys(disclosedRowKeys);
Now I want to hide the nodes which does not have children after search.
how can I hide the node if _node.getChildren() is null.
Could any one provide some inputs on this.
Thanks,
Swathi

AE Basics
Keyframe the mask path.

How to hide or add columns to a linked report in SSRS 2014

Hai All,
I have a report deployed on a server. And I created a linked report to it into another folder. Now I can actually manipulate on parameters of the linked report through Report manager but I have to hide some columns when displaying the linked report. Is there
a way to show or hide the columns on the Linked report.
Regards,
Rajesh

Hi,
This is a SQL report designing issue, with report builder we should be able to change the visibility of a column. Reports that deployed to
report manager can be edit by report builder, we may save it after edited.
Please check the article below:
Column Visibility Dialog Box (Report Builder)
https://msdn.microsoft.com/en-us/library/dd207071.aspx
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

How to hide edit link for some rows in report? (according to value of col)

Helo,
How to hide edit link for some rows in report? (according to value of column)
regards
siyavuş

Hi siyavuş
You can do this by taking the edit link off the report and putting it into your report SQL.
Use something like Select CASE WHEN (condition) THEN
'Put your edit link in here as an html Anchor like<a href="(target)">Edit</a>'
ELSE
tt.value
END edit_link
FROM test_table tthope it helps,
Gus..
You can reward this reply (and those of other helpers) by marking it as either Helpful or Correct.
This allows forum users to quickly find the correct answer.
;-)

How to hide Database Logon option when scheduling Crystal Report in BOE?

Hi All,
For security reason, we are try to hide the Database Logon option in Crystal Report Schedule page in InfoView.
There is option in CMC which we can configure the default Database logon option so that users do not have to enter the logon everytime they view or schedule the report. However, we are looking to hide this option completely.
Does anyone know if there is a security setting which can hide the option from specific users?
Thanks,
Bobby

Hi Bobby,
As Jorge informed that there is no method available within CMC to hide database logon option when scheduling or viewing a Crystal Report in the Info view. This is very much true.
But as you also mentioned that you don't want your users to enter the database logon credentials evertime they view or schedule a crystal report, there is one setting in CMC which we can do to avoid prompt for database logon credentials.
CMC - Home - Go to that specific crystal report - Click Process tab - Click the sub-tab 'Database' and at the bottom of the page there is an option "Use same database logon as when report is run". Check this option after providing the database credentials and click UPDATE.
Now whenever users try to view or schedule this specifc crystal report they won't be prompted for the database logon credentials.
Regards,
Venkat

Roll up of the formula results as per hierarchy in report

Hi,
I am using a employee hierarchy in report with key figure as ROWCOUNT and formlas as Total liability amount
Currently the report is showing the number of employee under its manager correct like if there are 5 employees under a employee E1.
Suppose there are 2 employees wose total liability amount is 0
The report is showing 5 as under E1.
But now user doesn't want to show the employees whose Total liability amount is 0.
So i make a condition to show only employees whose total liability amount is 0 but the report is still showing the number of employees as 5 (ROWCOUNT) instead of 3 although the employees with non zero total liability amount is displayed in the report.
SO,please suggest me how to achieve this.
Its would be a great help to me.

just need to properly maintain value categories..

How to display 3 level hierarchy alv report using SALV

Hi ,
      I need to display a Hierarchy ALV report with 3 level.I thought of trying CL_SALV_HIERSEQ_TABLE but i am able to display only two level report.
      How can i display the 3 - level heirarchy report using SALV. I don't want to use SALV_TREE.
      Regards,
      Aditya Tanguturi.

Hi Aditya,
Please check this thread
Is it possible to display more than 2 levels us... | SCN
Thanks !
Amit

Hide certain nodes in a hierarchy in report

Similar Messages

Maybe you are looking for