Hide Command Box through Sap ECC 6.0

Hi, SAP GURU's
How is it possible to globally hide command box in a Sap ECC 6.0. or hide it only from Enterprise Portal.
Regards
Sumeet Sharma

Hello Sumeet Sharma
Hiding the command box in SAPgui for windows is not possible.
Disabling it would probably mean you have to rewrite the SAPgui interface (not feasible).
Restricting your users from accessing content they are not supposed to access is based on authorizations, if you give everyone all rights you are bound to heading for trouble and issues restricting where they are going. Also when you get an audit they will surely flag this point as being dangerous.
You can check with SAP by opening a customer message.
Kind regards
Tom

Similar Messages

  • Disabling Command box in SAP R3 IView

    Hi Portal Guru's,
                    I need to disable the command box in SAP R3 transaction IView. The basic requirement is to disable the user to goto any other transaction once in the R3 system. The user can also type in '/o' to open a new session while using wingui, we want to disable this ability.
    Any suggestions would be appreciated.
    regards
    Nirmal Jct

    this will work if your are using ITS webgui.
    for wingui check the following threa, you need to modify some registry entries.
    Hide the command box in sap gui
    Regards
    Raja

  • What are the commands using in SAP ECC 6.0 ehp on SYBASE Database? Backup and restore commands?

    Hi All,
    What are the commands using in SAP ECC 6.0 ehp on SYBASE Database? Backup and restore commands?

    Hi Jayachander,
    Have a look at these sap notes:
    For taking backup: Schedule from DB13 and get the exact command from Logs
    1841993 - SYB: How to schedule backups in DBA Cockpit
    1887068 - SYB: Using external backup and restore with SAP Sybase ASE
    How to restore DB
    1611715 - SYB: How to restore a Sybase ASE database server (Windows)
    Divyanshu

  • Hide the command box in sap gui

    Hi,
    Good to see the SAP GUI form,
    we are bringing SAP R/3 transactions in Enterprise Portal,
    every time the r/3 transaction opens in iview (SAP GUI for windows).
    It shows the normal screen with "Command box" on the top,
    now we dont want the user to browse the sap system using the command box.
    any info on that..is it possible to hide or remove?
    Thanks for help,
    -Krishna

    Hi Krishna,
    note 648452 states that the command box will not be displayed for inplace SAP GUI for Windows sessions if you set the following registry value:
    [HKEY_CURRENT_USER\Software\SAP\SAPGUI Front\SAP Frontend Server\Customize] "HideCmdLineInplace"=dword:00000001
    If you want to disable the command box also for outplace sessions in the portal then you may set in addition to above value the following:
    [HKEY_CURRENT_USER\Software\SAP\SAPGUI Front\SAP Frontend Server\Customize] "HideCmdLineInplaceAllSession"=dword:00000001        
    Best regards,
    Christian

  • Hide command-box in portal

    I create a ABAP report with ALV grid layout.
    I link the report to a transaction.
    This report will be used in the gui and add to a roll in the portal.
    The transaction iview works well, but the command box is also visible.
    We use      ~webgui_simple_toolbar in the iview as paramater to restrict the command-box.
    This is working.  When the report first appear only the execute button appear.
    The problem is after execute, the ALV grid info appear with the command-box. .
    Although the user cannot use the command-box, i stll want ot prevent this from appearing.
    I try to use PF-status in my program, but can't get rid of the command-box, menu.
    Regards
    Frances

    Hi Shelly,
    I've recently configured ITS transactions to publish on portal setting this parameters on SICF to limit actions, header, possibility to open other transactions:
    SAP Library - SAP ITS in the SAP Web Application Server
    ~TRANSACTION              
    Transaction code to be executed
    <<Your transaction code>>
    ~NOHEADEROKCODE
    Hide transaction launcher
    1
    ~GENERATEDYNPRO
    Enable screen html generator.
    1
    ~WEBGUI_SIMPLE_TOOLBAR
    This simplifies toolbar.
    137
    ~SINGLETRANSACTION
    User only could access to transaction defined by parameter ~TRANSACTION.
    1
    ~WEBGUI
    Enables a set of html properties to get a better UX.
    1
    Hope this helps,
    Kind regards!

  • Hide Command box in transactional iview

    hi,
      I have imported the <b>Best practices for EP</b> package. In the package we have webgui transactional iviews. my concern is when i run the iview i can see the command box and from that i can run other transactions. I want to hide the command box so that user can run only that particular transaction.
    using webgui (ITS) this can be done by setting the service parameter ~NOHEADEROKCODE = 1. But when we import the business package where do we need to set this service parameter.
    Is there a way to do it?
    Thanks in advance,
    Gopi

    Gopi,
    Are you using V2.60.
    You are best to log an OSS message under component
    SV-SMB-AIO-BP-EP.
    James

  • How to hide command pront in SAP screen

    Hi,
    I have a requirment that i need to hide the command pront in SAP screen, it is very very urgent for me, please help me.
    Reward for every usefull answer.
    Saleem.

    Hi,
    Thanks for your responce...but the problem is i need to do from the program.
    Saleem.

  • Portal: custom i-view definition (transaction) how to hide command box

    Dear Sirs,
    we are trying to define a transaction i-view (displaying a SRM transaction)
    in portal but hiding the command box.
    The i-view has been defined under portal content \..\iview\GUI\
    We have tested some values in "Parameters Forwarded to Transaction" in I-VIEW definition,
    like...
    noheaderOkCode = 1
    WEBGUI_SIMPLE_TOOLBAR  = hide, no etc..
    listed in other threads
    but whitout any effect.
    Is this a possible feature and what are the correct values ?
    From SRM side we have tested the transaction in SE93 in both modes, EWT and normal.

    Sorry but we have any result with these values
    ~NOHEADEROKCODE = 1 or
    ~WEBGUI_SIMPLE_TOOLBAR = 0
    In the "Parameter forwarded to transaction" in the iview definition from portal.
    The command box appears in any case.
    Whe should remove also the "menu" button.

  • Hide command box in portal transaction iview sap GUI for HTML

    I have tried &~NOHEADEROKCODE = 1 and ~NOHEADEROKCODE = 1 in the applications parameters with no luck.  Can this be done from the ivew?

    Hi Shelly,
    I've recently configured ITS transactions to publish on portal setting this parameters on SICF to limit actions, header, possibility to open other transactions:
    SAP Library - SAP ITS in the SAP Web Application Server
    ~TRANSACTION              
    Transaction code to be executed
    <<Your transaction code>>
    ~NOHEADEROKCODE
    Hide transaction launcher
    1
    ~GENERATEDYNPRO
    Enable screen html generator.
    1
    ~WEBGUI_SIMPLE_TOOLBAR
    This simplifies toolbar.
    137
    ~SINGLETRANSACTION
    User only could access to transaction defined by parameter ~TRANSACTION.
    1
    ~WEBGUI
    Enables a set of html properties to get a better UX.
    1
    Hope this helps,
    Kind regards!

  • How to eliminate Command Box in SAPGUI for Java in Portal?

    Greetings.
    We are planning to use SAPGUI for Java in Portal.
    How do we make sure the user does not go to a different transaction other than the one defined in the iView.
    Thank you.
    PK

    I am sending you a link for forum thread.Hope you find your query answered.
    Re: Hide the command box in sap gui
    Have a best day.

  • How to hide command fied using transaction iview

    Hi All,
    Is there any way to hide command box (transactional field) in Portal using transactional iview ?
    I have searched in sdn forum, it is possible via IAC iview using application parameters ~headerOKcode = 1.
    Since our ITS is not configured properly and it is continously giving Browser errors (Object expected, 'wgu_global_eventhandler' is null or not an object).
    So.........I can;t go ahead with IAC Iview.
    I suspect.....anyone has gone through this problem and experts has a solution with transactional iviews to hide those command boxes.
    Appreciate your inputs in this regards.
    Thanks,
    Anil Kumar

    Try this in 'Application Parameters' field '&~NOHEADEROKCODE=1'

  • LM00 - Hide push button and Command box

    Hi all,
    We are in the process of implementing ITS mobile for WM transactions (for example : LM00)
    In the browser, I could see pushbuttons F2, F4 and command box. I dont need these push buttons and the command box. Can I hide them in the browser? In fact I want to hide the whole line.
    Note : The above mentioned push buttons are not the ones coded inside the application.
    Thankyou in advance.
    Regards,
    Vic

    Hello Edgar,
    Thankyou. That helped.
    I have 2 more please
    1. The pop-message (in one of the custom developed RF transaction) that appears on MC9090 through SAP Console doesnt appear when I use ITSMobile with browser on Windows Mobile 5.0 on the same handheld. Any idea, why I will not get this message? Could this be because of missing template for pop-up message box?
    I am trying to use LM00 (+ other tranx) through ITS mobile
    2. I recieve a small screen prompt to enter User ID/Password on the IE 6.0 in the laptop on typing URL. However, in MC9090 handheld device with Windows Mobile 5.0+IE, I do not get this small screen to enter User ID/Password. Therefore a blank screen with no text is displayed. Do I have create template for this small screen too? If so what will be screen number (pgm rlogon?), please. Can you please throw some light on this please?
    Thanks a ton in advance.
    Best regards,
    Vic

  • Hide command window from transactions in sap portal

    Dear experts
                  sir i want to hide command window from transactions iview in sap portal when i using sap gui for windows  sir i know very well settings for sap gui for html. so is there any possiblity for hiding command window from transactions iview when i use sap gui for windows
    please help...............
    Edited by: mousam jaini on Nov 1, 2010 12:11 PM

    Hi Mousam
    You can get solution from the  SAP Note: 1010519
    If ur system doesnot meet the pre-requiste, then you can set the below parameter under transaction sicf:
    ~webgui_simple_toolbar=1
    Pls go through the below article to display the SAP Transaction as SAP GUI
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e046cb5c-711a-2a10-95a9-81b365901b95
    Thanks
    Keshari

  • ECC = SNC ReplenishmentOrderNotification custom message through SAP PI

    Helllo,
    I have one issue during proxy call in SNC. We are implementing SNC system with our ECC 6.0 system for PO processing, PO Confirmation Processing. The interfaces used is the standard SNC PI package from SAP through SAP PI; however, we have extended PO IDOCs in ECC for some Z-fields and created a new message type in SAP PI and mapped them properly. The problem, when it reached SNC, I checked the XML message and it was as expected with the new Z-fields but when the inbound proxy is called, I got the following error:
    Error during proxy processing An exception with the type CX_SY_DYN_CALL_ILLEGAL_TYPE occurred, but was neither handled locally, nor declared in a RAISING clause The function call of /SCA/BIF_REPLORD_BO failed; a field may have been assigned to the parameter IS_REPLORD_NOTIF whose type is not compatible with this parameter
    it seems that the newly generated service interface is not reconginzing the new ReplenishmentOrderNotification message structure with the Z-fields
    How can we resolve this issue and make the inbound proxy reconginze the new message stucture?
    By the way, I found this Badi: BAdI for ReplenishmentOrderNotification_In? and I have no clue how it works if we need to implement it?
    Thank you,

    Hi Alan,
    Please check below threads.
    1. INTERFACE_REGISTRATION_ERROR (inbound ABAP proxy)
    2. ABAP ->INTERFACE_REGISTRATION_ERROR for outboud sync ABAP proxy
    3. INTERFACE_REGISTRATION_ERROR using File-to-File method
    Regards,
    Deepak

  • ECC TO SRM-MDM CATALOG THROUGH SAP PI

    We have a scenario where we are sending data from ECC to SRM-MDM Catalog through SAP PI and data is coming from ECC through proxy and sending to SRM u2013MDM catlog through file adapter. In ESR part we have used SAP defined standard service interfaces (CatalogueUpdateNotification as sender interface and MDMInfoRecordDataTransmission as a receiver interface). The mapping used is also standard one.
    Now we have got requirement to send the data for vendor mat no, manufacturer field of info records from ECC to SRM-MDM catlog.  But we are unable to find out these two fields in standard interfaces/messages. Can anybody guide us how to add these fields in the current data types or is there any other standard interfaces we can use.
    Thanks in advance.

    Hi Shiv,
    Many thanks for your reply.
    Since we're not using XI / PI scenario and this is an upgrade from SRM 5.5 to SRM 7, Iu2019m using the same approach that was already used in SRM 5.5 with CCM 2.0.
    The idea is that the catalogue and all the records maintained need to be associated to a contract. So, I add the contract ID and the correspondent contract item in the import file, in addition to the supplier name, product ID, price information and so on. I mapped the contract ID with the field contract price.
    In relation to the price information fields, as I want it to be visible for any user that accesses the product catalogue, I tried different approaches:
    1.Using OCI Price information u2013 amount, currency, price base quantity and price base quantity UoM;
    2.Using OCI Price contract u2013 amount, currency, price base quantity and price base quantity UoM;
    The first approach didnu2019t work very well, as I was not able to see price information when accessing the catalogue. I could only see it once I transfer the items to the SC. In addition, this approach had one problem. The products were displayed but it was not possible to select the items one by one. To do that I needed to select all the items of the catalogue and after that the detail of the contract ID was displayed in every item, allowing me to choose the items that I want to select to my SC.
    The second approach was better as the information was visible when accessing the SC and I was able to select all the items, one by one, as it should be. The main problem of this approach was that Iu2019m getting errors in the SC when the materials have stock u2013 u201CInterface data contains errorsu201D. Or alternatively, if the items didnu2019t have stock, the SC was possible, but when I tried to create a PO from that SC, It simply does not work.
    So, can someone help me? Any ideas?
    Thanks in advance.
    Best regards,
    Andreia

Maybe you are looking for