Hide Cross Tab Header

Post Author: lbassil
CA Forum: Crystal Reports
All,
I want to know if it's possible to hide the header of a cross tab? The suppress option did supress the header, but leaves space equal to the height of the header. So I tried to set the height = 0, i could not do it because the minimum height is 70 (as I concluded). Any clue?
Anyone can help in this issue? Either tell me how to make the height of the cross tab header = 0, or how to stop repeating the column header of the cross tab on each new page?
Regards.

Hi!
if i've correctly understood your question:
click on your left into the section "document structure and filters) (incon paper with a pencil)
right click on your cross table block and select "format table"
on the option page that come up there is on the right a flag "show top header".
remove it a click ok!
i hope this help!
b.r.
Adrians

Similar Messages

To Merge Cross Tab Header in Web-I XI R2

Hello All,
I have one cross tab report and Its header is Name field.When we run the report, suppose we get 15 columns so 15 times the report header displays the "Name" in cross tab. I want to display the 'Name ' field only once in middle of cross tab header.
The Scenario :--
     Name     Name     Name     Name     Name     Name     Name     Name
Region     q     wr     er     dv     vderg     gr     gff     dfgf
Region
Region
Region
Region
Region
Region
The expected result :--
                                                                         Name
Region     q     wr     er     dv     vderg     gr     gff     dfgf
Region
Region
Region
Region
Region
Region
As per the cross tab basics --- we can not merge the cross tab header however I want any alternative solution or any work-around for it.
Thank you.
Bhushan

Hi Sunil Kumar ,
I tried this way my user wants a report year,quarter,sales and quantity in cross tab format..
YEAR
Q1
Q2
sales
quantity
sales
quantity
2009
XXXXX
XXXXX
XXXXX
XXXXX
2010
XXXXX
XXXXX
XXXXX
XXXXX
2011
XXXXX
XXXXX
XXXXX
XXXXX
2012
XXXXX
XXXXX
XXXXX
XXXXX
If any inputs always welcome.
Regards
Durgaprasad.yelluri

Cross tab Header display..problem!

I have cross tab report in that we wanted to give user drag and drop option,but when the user drags and drops a new object the name of that object will not come automatically. i have tried in other ways to get that but unable to.Could somebody syggest the best way to get the Column names in Cross tab report..thanks..

Jaspal,
the best way to get the Column names in Cross tab report
WebI does not provide automatic column headings once you go into Cross tab. The easiest way to achieve is to click once on the top most cell, then right-click and choose insert, insert a row above. Once the row is inserted, then in each column you can place a header by manual intervention.
Thanks,
John

Hide Cross Tab

Hello All,
I want to display cross tab only if the data exist, please let me know how can i handle.
<?variable:c297;xdoxslt:create_groups($_XDOCTX, OTH_TASK/node()[local-name()='YEAR' or local-name()='MONTH'], 'YEAR;MONTH', 'v')?><?horizontal-break-table:1?>
When i don't have data for the node OTH_TASK, the template errors
Caused by: oracle.xdo.parser.v2.XPathException: Extension function error: Method not found 'create_groups'
     at oracle.xdo.parser.v2.XSLStylesheet.flushErrors(XSLStylesheet.java:1534)
     at oracle.xdo.parser.v2.XSLStylesheet.execute(XSLStylesheet.java:521)
     at oracle.xdo.parser.v2.XSLStylesheet.execute(XSLStylesheet.java:489)
     at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:271)
     at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:155)
     at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:192)
     ... 16 more

No i tried If and Choose options but i hit the same error
Font Dir: C:\Program Files\Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\fonts
Run XDO Start
RTFProcessor setLocale: en-us
FOProcessor setData: C:\Rakesh\Projects\OTL\04102012\mnth_data.xml
FOProcessor setLocale: en-us
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at oracle.apps.xdo.common.xml.XSLT10gR1.invokeProcessXSL(Unknown Source)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(Unknown Source)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(Unknown Source)
     at oracle.apps.xdo.common.xml.XSLTWrapper.transform(Unknown Source)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(Unknown Source)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(Unknown Source)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(Unknown Source)
     at oracle.apps.xdo.template.FOProcessor.createFO(Unknown Source)
     at oracle.apps.xdo.template.FOProcessor.generate(Unknown Source)
     at RTF2PDF.runRTFto(RTF2PDF.java:632)
     at RTF2PDF.runXDO(RTF2PDF.java:478)
     at RTF2PDF.main(RTF2PDF.java:254)
Caused by: oracle.xdo.parser.v2.XPathException: Extension function error: Method not found 'create_groups'
     at oracle.xdo.parser.v2.XSLStylesheet.flushErrors(XSLStylesheet.java:1534)
     at oracle.xdo.parser.v2.XSLStylesheet.execute(XSLStylesheet.java:521)
     at oracle.xdo.parser.v2.XSLStylesheet.execute(XSLStylesheet.java:489)
     at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:271)
     at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:155)
     at oracle.xdo.

Cross Tab Header

Hi everyone!
I have a problem with a cross table. I don't know how many columns will be displayed and I need an header row that covers all the dynamic columns... how can I get a layout like this?
|----------------------------HEADER--------------------------|
| col 1 | col 2 | col 3 | col 4 | col 5 | col 6 | col 7 |
| val 1 | val 2 | val 3 | val 4 | val 5 | val 6 | val 7 |
Thanks so!
DrPlexi

You can merge columns :
define variable var = count of columns. you need count them report!
<xsl:variable name="var"><?C?></xsl:variable>
This tag write in the header cell:
<xsl:attribute xdofo:ctx="block" name="number-columns-spanned"><xsl:value-of select="$var" /></xsl:attribute>

Bug – CR 2011 cross tab number decimal formula not executing

I have a formula to format the number of decimal points in both the column and row header values in a cross tab subreport. The formula does not appear to execute. If I display the data in a simple table format and use the same decimal formula the format is correct.
cross tab header, decimals not displayed correctly
Data when displayed in a simple table using the same formula, decimals are displayed correctly

Hi Paul,
Here's another way:
Remove the formula you've used under 'Decimal' for the cells in the crosstab.
Right-click one of the cells > Format Field > Common tab > Click the formula button beside 'Display String' and use this code:
numbervar x := CurrentFieldValue;
numbervar ipart;
numbervar decpart;
ipart := int(x) ;
decpart := x - ipart;
if ipart > 0 then
totext(ipart,0)
else if decpart > 0 then
Replace(totext(decpart),"0","")
-Abhilash

How to Display two different objects in a single table header in Cross Tab?

i All,
I've a reqiurement for a Cross Tab Report like I need two different objects that should be displayed side-by-side, one object's values after another in a single header. In the picture below I've shown the objects separately in two rows, top header having BSNLNL,MTNLNL,RCOMNL and Header-2 having AIRTIL,RCOMIL. But requirements needs to be showing like this,
BSNLNL
MTNLNL
RCOMNL
AIRTIL
RCOMIL
Actually, the data for the header comes from a single object called Operator. I've show the Operators name ending with NL and after that names ending with IL. So, i've separated the data into two variables using the below formulae.
IL:
=[Billing Operator]
Where
Match([Billing Operator];"*IL")=1
NL:
=[Billing Operator]
Where
Match([Billing Operator];"*NL")=1
Also, the NL data should start first and after the NL data's last value ends, the IL data should begin.
One more thing is that I've to show '0' for null values. So i've used the below formulae on the column data. You can see below that except the "Outgoing ILD Mins in the month from Mobile Network" everything else showing fine. I don't understand why.
=If
Substr([Franchise];3;1)="M"
Then
   [Mobile Outgoing Charged Usage Minutes]
   Else
   0
I tried different approaches but couldn't find a solution. Could you please help me?
I'm using BO WebI 4.1 SP1
Regards,
Naren Vema.

Hi Naren,
No need to split Billing Operator object. Create a variable-
V_IL_NL= If Match([Billing Operator];"*IL")=1 Then "IL" ElseIf Match([Billing Operator];"*NL")=1 Then "NL"
1) Put V_IL_NL variable below Billing Operator object header.
2) Sort and create break on this variable.
3) Delete Footer column. it will automatically create when you apply break.
4) Hide V_IL_NL variable from this header.
~Anuj

Hide the cross-tab headers

Hi -
I am trying to figure out how to hide the cross-tab headers on even number pages. I know that I can suppress the text in the header columns but I would also like to hide the cells as well. Is there a way to do this?
Thanks
Akash

hi Akash,
unfortunately there is no ability to hide the cells / space for column headers that are suppressed. the grid lines cannot be conditionally hidden either.
if you really need this look and feel you may wish to insert a 2nd section below your existing cross-tab. copy and paste the cross-tab into the new section and have that 2nd cross-tab's column header suppressed as well as shrink up this header with the Size and Position > Height property. you can then remove the grid lines (if applicable) on the column header for this 2nd cross-tab.
now you need to conditionally suppress the new section based on the page number and the original section based on the page number. to suppress the new section should be
remainder(pagenumber, 2) <> 0
and for the original section
remainder(pagenumber,2) = 0
-jamie
Message was edited by: Jamie Wiseman

How to add an image or static text in the header of EACH page of a cross-Tab report

Post Author: rtutus
CA Forum: General
Hi, I use Crustal 11.0.
I have a cross Tab. I display the items on the left column and the months horizontally, the items are grouped by category field. The values are the sum of quantities are displayed for each month. Like this:
                         Items         Jan       Feb       March .....................Total
Category 1
                         Item11         val11     Val12      Val13                     Total values
                         Item12         val21     Val22      Val23                     Total values
                         Item13         val31     Val32      Val33                     Total values
Category 2
                         Item21         val11     Val12      Val13                     Total values
                         Item22         val21     Val22      Val23                     Total values
                         Item23         val31     Val32      Val33                     Total values
Category 3
                         Item31         val11     Val12      Val13                     Total values
                         Item32         val21     Val22      Val23                     Total values
                         Item33         val31     Val32      Val33                     Total values
The problem, I want to add a page header for each page of the report.
When Crystal reports first displays my cross-tab in the designer, CR displays the cross tab in the Report header section. I d like to add text or image for each page and not only at the begining of my Cross-Tab.
If I just add an image or text at the top of the report designer, which is my report header, I get the image or text only on the begining of the 1st page of my report but never in the other following pages.
If I try to work around the problem and move the cross Tab to a group section instead, and then put the Image in the group header, I get what I want, but the problem is that:
The columns header: Jan, February....December are displayed for each group of my report and not only in the beginning of the report. I get something like this:
                         Items         Jan       Feb       March .....................Total
Category 1
                         Item11         val11     Val12      Val13                     Total values
                         Item12         val21     Val22      Val23                     Total values
                         Item13         val31     Val32      Val33                     Total values
                         Items         Jan       Feb       March .....................Total
Category 2
                         Item21         val11     Val12      Val13                     Total values
                         Item22         val21     Val22      Val23                     Total values
                         Item23         val31     Val32      Val33                     Total values
                         Items         Jan       Feb       March .....................Total
Category 3
                         Item31         val11     Val12      Val13                     Total values
                         Item32         val21     Val22      Val23                     Total values
                         Item33         val31     Val32      Val33                     Total values
You see the months get duplicated. Any way, my real need is to add an image or text in the header of EACH page of a cross-Tab report.
Thanks a lot for your help.

Hi Divya,
you could do for example in the wdDoInit() of the view
wdContext.currentContextElement().setPicture("picture.gif");
Now you assign this context variable to the Tab using the Tab_header's imageSource-Property. When you click on its value column, you see a button with three dots on it. If you click on this button, you will get all context nodes and attributes for this View. Usable variables are clearly marked, you now choose the one named Picture or what ever name you prefer to use. But it must correspond to the one set in the wdDoInit.
I think setting a picture (not necessarily for the tab-page) is done in one of the excellent tutorials. If you are a newcomer I strongly recommend doing some of the tutorials. I have learned tremendously from them.
Hope this helped
Harald

Creating a header for rows/columns in cross-tab with syntax

Hi,
The issue is creating strings for rows or columns' headers. How can I create a formula field which contains more than one seperate string. Such as "aaa", "bbb" and "ccc" are headers and they should be in seperate columns. In short, they will behave like characteristics of one of my query's field but they are just headers of the columns.
..............aaa...bbb...ccc....
row1.......x.......x........x.....
row2.......y.......y........y.....
Also there is another issue about the formulation again. Is there any operator that does the same job as " \n" which is used in C languages to break the line?
before:
aaabbb
after:
aaa
bbb

Hi Carl;
Firstly, thanks for answering my question. To explain my problem there are two options ahead(for my first question); first one is writing down the actions step by step, the second one is posting an image file(jpeg etc) to visualize it. I think the first one will be enough. If not tell me
Step 1- Create a cross-tab and right click and select cross-tab expert.
Step 2- Click the button "New Formula" and write down any word(such as "Sales") between two -"- sign to make it string.Then save and close.
Step 3- Drag and drop the created formula to "columns" section and fill the other necessary sections with your database's(such as xtreme.mdb which is famous for crystal users) fields.Don't forget to add another column value to "columns" section, since our formula has no link to database.
Step 4- Then click OK to save the changes and lets preview the cross-tab.The result will have one top column and his child or children(that depends on your data). And this top column is behaving like a header not a field.
Now turn the second step but write down a formula for 2 columns or more.For exmple "Sales" and "Profit".So the result will have 2 top columns and their child/children.
My question is "what is the formula for 2 or more columns?"
Also I couldn't get the answer for my second question. What is the meaning of expressions "\c" and ChrW(13)?
Edited by: diabolus on Oct 30, 2009 9:39 AM

Hide top axis in cross tab report

Hi
How to hide top axis in webi report xir4.
Only objects names on top axis to be hide.
I see only option for data fold and unfold
Please suggest.
Thanks.

hi,
Please right click the top axis of Cross tab.
Select Hide > Hide dimension
Now you will see only Left axis Headers and data only. Top row which has column names will be hidden.
Regards
Vamsee

Hide a row in CROSS TAB

HI experts,
I have a cross tab.
The rows are automatic from a field, for example month:
1
2
3
4
5
6 ....
I new to hide , for example the row of AUGUST.
How can I hide the row in the cross table. I want to hide, I dont want to supress the result.
Thank you very much
Edited by: Markus C. on Jul 23, 2010 10:18 AM

Hi,
Create a formula that would represent what you want displayed in the rows and base the Row on the formula instead of a specific field.
Heather

Hide duplicate rows in Cross Tab report

where can i find the option to hide duplicate rows in cross tab report..?

Is it a limitation with crosstab report..?
Ok, here's the issue i have a crosstab report and its based on a VIEW.
the data duplicates based on created_by and last_updated_by columns as I'm not using these columns in the report.
any ideas or workarounds to avoid duplicates....?
Thanks!

How to put title or labels on top of row headding of Cross Tab

Hello..
I created one cross tab.I put labels in the top row,these labels are coming only in first page only,I tried repeat row label also,But not working....I need all the labels in all pages..

Hi,
In XI r3 - on a cross-tab table under the page layout properties there is a "Repeat header on every page" option. Is this checked?
Regards
Alan

Cross Tab Column Header and Embedded or Calculated Member

Hello All
I am needing some help with a Cross Tab in CR2008.
My Cross Tab look as follows:
Rows______________Columns
......................................Fiscal Year
Account Number...........Summarized Field (Value Field)
The report spans three Fiscal Years but not all accounts have three Fiscal Years worth of data so some Cross tabs start 2009, 2008, 2007, Some report 2008 and 2007, Some just 2007 (and other variations). To get my cross tab working correctly I need to create a formula that get the CurrentColumnIndex based upon the Fiscal Year. e.g. If columnd header = 2009 column index = 0.
Can anyone advise how I would go about this?
Thanks
Phillip

Phillip, go to your data source, and see if you can add a new connection,
one of those options should be (Command)
if you can add a Command, then you can put the SQL in the command section.
You will need to add the Command as a data source, and remove the old
data source once the command is added, you will be able to edit it if needed.

Hide Cross Tab Header

Similar Messages

Maybe you are looking for