Hide/delete tab from My travel profile (FITP_PROFILE) iView

Hello,
I'm using SAP EP7 SP18 and ECC 6. We've activated Webdynpros for abap and please, we need to hide/delete a tab (Train preferences) of My travel profile (FITP_PROFILE) WDA iView for all users.
With right mouse button in execution time you can hide it but for each user and we need it for all users.
Please, do you know how can I do it?
Thanks

Ok. Once thru all the tabs you reach Travel & Expenses.
You get to see "My Travel Profile"
Right Click on it.
Then click on preview. Here you can see "My Travel Profile" page. Put the cursor on "Rail Prefernces" and Ctrl+Right Click. A new window opens
Here open "Tab Strip1" and then open "Tabs". Then click on "Railway Preferences".
In the right hand side select NO for "Visible" and then apply and ok.
Hope it helps

Similar Messages

How to hide a tab from the existing tabstrip of CRMD_BUS2000111 transaction

I have to hide competitor tab from the tabstrip of CRMD_BUS2000111 transaction in CRM. I have tried shd0 but since this is not a dialog transaction we cannot create screen variant. After that I tried BUCO transaction.In BUCO I selected Sales Area data then competitors. But when I double click on compititors it is showing a message VCT control for screen configuration does not exist.
I do not have much idea about BUCO. Can any one help me solving my problem?

Friends
With the following command you can register you .ocx ( Visual Buttons Control files ) in windows.
REGSVR32 C:\Progra~1\SAP\FrontEnd\SAPgui\vistransmitter.ocx
The above command will register said file in the registry and facilitate Visual Configurator Tool to run for Screen Sequence Modifications. With the above I also recommend Latest Patch (23), which is available with SAP to update on the windows frontend to avoid some other known frond end issues.
Before doing all above make sure your have 2 files existence in the C:\Progra~1\SAP\FrontEnd\SAPgui folder
Visu_se.exe
vistransmitter.ocx
Best Regards,
Jaswant Purba
[email protected]

How do I delete tabs from homepage

How do I delete tabs from home page

You can close individual tabs by clicking them.
You can adjust your Tabs preferences to be the same as mine below:

Can't delete tabs from Firefox on my iPhone

How can I delete tabs from Firefox on my iPhone? I'm using Firefox Sync and the number of tabs keep getting bigger. I'm up to 48.
PS: I've tried the iPhone forum but no one replies. It's looking like there is no support for Sync??????

Good morning,
Sorry, ContactsTap does not solve the problem. It doesn't know about the "All on my iPhone" Group. Inside the app the contacts show as uncategorized.
The problem is that if a contact is saved as "All on my iPhone" how can I move it to another of the native iPhone groups so that it syncs with the other group source.
It is possible to link the contact with other contacts on other groups but I cannot move it to another group. It seems you have to retype the contacts.
Someone forgot to include this feature. May be next iOs update?
Best regards

How do I delete tabs from my IPad

How do I delete tabs from my IPad ?
I have tees sites that have no trash or x to rid them

Hey Joaneaudette. Follow these methods and try it
– Tap the + button at the top right of the Safari screen to add a new tab
– On the new tab screen tap on the ‘Private’ button/word at bottom left
– You’ll get a popup dialog that asks if you want to Close All or Keep All tabs.
– Select ‘Close All’ then tap on Private again and you’ll be back to normal browsing mode with a clean slate and no tabs open.
Hope it helps!

Hide/delete fields from standard Adobe Form FITP_REQUEST_FORM

All dear gurus,
I am new to adobe form. I am working on ess mss. In travel request we are getting the adobe form fitp_request_form.
We have some unwanted fields in the form. Its not interactive .
Either I want to hide or delete those fields from the form. thats it.
How I should start. guide me pls.
Regards,
Namsheed.

Hi Namsheed,
You might need to copy the standard as customized form and you are free to hide / delete any field in the form .
http://scn.sap.com/thread/3578272
Also, you need functional to configure to use this customized form instead.
Thanks.
regards,
Xiang Li

Server 2008 Policy, hide Security Tab from Non-Administrators

Hello,
I got asked to use the policy to hide the Security tab on folder for non-administrator, administrators need to see it to adjust folder auditing.
Checking Server 2008 R2, GPO, User Configurations, Policies, Administrative Template, Windows Components, Remove Security Tab "Enabled option, this either
turns all on or all off. Is there a way to hide the Security Tab for all users except Administrators? I did a few google search and did not find anything.Thanks, b.

Ok, I did what the steps had listed. I defined a group, I defined a policy, I applied a policy.
Again, I am trying to hide the Security Tab from all users on the server shares and local desktop c: drive shares, but allowing Domain Administrators to see and access the Security Tab, not sure what I am missing:
#1 Define the restricted group (all users except Administrator)
a.
Click Start, point to Administrative Tools,
b.
Active Directory Users and Computers
c.
Domians
d.
User
e.
Right-Click
f.
New
g.
Group
h.
Group Name: Remove Security Tab
i.
Group Scope: Global Security
j.
Members
k.
Add
l.
Add users to now see Security Tab
#2 Define the Policy
a.
Click Start, point to Administrative Tools, and then click Group Policy Management.
b.
In the console tree on the left, expand Forest.
c.
Expand Domains.
d.
Expand Domain Name.
e.
Expand Group Policy Objects.
f.
Right-Click, New
g.
Name: Remove Security Tab
h.
Source Starter GPO: none
i.
Right-Click Remove Security Tab
j.
Edit
k.
User Configuration
l.
Policies
m.
Administrative Template
n.
Windows Components
o.
Windows Explorer
p.
Remove Security Tab "Enabled"
#3 Apply the Policy
a.
Click Start, point to Administrative Tools, and then click Group Policy Management.
b.
In the console tree on the left, expand Forest.
c.
Expand Domains.
d.
Expand Domain Name.
e.
Expand Group Policy Objects.
f.
Click the Group Policy object that you do not want to apply to administrators.
g.
In the display pane on the right, click the Delegation tab.
h.
Click the Advanced button in the lower-right corner of the display pane.
i.
Click Add,
j.
Select Remove Security Tab
k. Click OK.
l.
Select Deny
Any Ideas? Thanks
b.

Impact delete Statuses from existing status profile

Hi experts,
What is the impact to the existing trade promotion plan if in configuration delete the existing statuses from the existing status profile?
Cheers.

Hi Mini,
We had to do this after we went live and it had a wide variety of consequences.
I will just assume that this is not being done when already in production.
a) If you have built some logic in the search based on the user status you will have to redo that
b) Any logic which was done around authorization or status drop-down field control on UI has to be redone.
c) Of-course if there was any reporting already done on the status then thats another point for you.
Other than this the data integrity of the existing Promotions is affected.
I hope this information will be helpful for you in making a cautious decision.
Thanks!
Amrut

Hide/Delete lines from ABAP Query output when Quantity is 0

Hi all,
I'm changing an existing abap query. My requirement is to delete the rows from the report output where qantity = 0.
I tried the following ways.
1. In SQ01, select the quantity field and check the checkbox for "Display only field <> 0", but this didnt worked as it will
     supress the zero from display.
2. I tried to write code in the Infoset SQ02->Edit->Code. I wrote the following code "CHECK vbep-wmeng IS NOT INITIAL".
    Here the problem is, the code is not executing in the test client. When I open the Infoset in test(i mean development test)
    client the code is there, but when i execute the program its not working. I tried using "BREAK-POINT", program executions
    does not stop at the break point. There is existing code in the event "START-OF-SELECTION", this code I'm able to see in the
    query program opened through SE38. I edited the existing code and kept a break point in between, and now checked in the
    program in SE38, but the changes are not reflected. I'm able to see old code only(even after save n generate).
3. Gave search in SCN, google etc.
Please note.
1. I'm not using any Logical Database in the Infoset. Its a simple join of 4 tables.
2. Query is created in the Global Area (cross client) not client specific.
Can anybody tell me what could be the problem and how can Over the above issues and achive the requirement.
Thanks in advance.
Edited by: Mr A on Feb 25, 2010 1:39 AM

Dear Mr A,
Can i know how did u solve the issue even i'm facing the same problem.
Regards,
Karan Bhasin

How to delete items from the list of "auto-open" tabs that load whenever FF4 opens?

When I recently downloaded FF4, I was asked if I'd like to have FF automatically open the same tabs as were set in my IE. Great! Worked perfectly until I set those tabs as App Tabs. Now both the App Tabs and the original IE set of tabs open whenever I open FF -- essentially each tab loads twice -- as app tab and large tab. How can I delete tabs from the list of "auto-open" tabs? In addition, for some reason, every time I try to set my home page, it's not working -- I keep getting the same home page regardless of how many times I have tried to set a new one.

You can close a tab with a middle-click or with a left click on the close X on the tab or via the right-click context menu of that tab.<br />
Do those tabs come back if you close then and lose Firefox?

Hide the two tab from infotype 0024

Hello,
I need to hide two tabs from infotype 0024 sreen, "Appraisals where appraisee" and "appraisals where appraiser", in PA30 transaction. But it should appear on the infotype 0025 . Is there any way to do that?
Thanks in advance.
Regards
Kuntal

Screen 3000 is and overview screen. You need to create a module pool for screen 2000 - detail screen. Enter 2000 also as alternative screen in the same line and double click it. There you can set the invisiblity of the certain field / tab.
The entry should look like
"Module pool Screen Alter. screen
MP002400 2000 2000
You can also include feature if you want to differantiate alternative screen i.e. based on country.
Regards
Marcin

How do I delete items from "My Activity" from the Community tab..

How do I delete items from "My Activity" from the Community tab?

You can't. The streams are uneditable even to the mods and admins. It's an ongoing data collection. You can only hide stuff by marking it as read in the relevant areas like your Inbox.
Mylenium

How do I delete movies from iTunes library? I have moved them to the iCloud and now only seem to have the option to hide the icon in iCloud. I am sure I chose poorly at the 'keep file' window. Please help. My Brain hurts- 18 movies need to go-.

How do I delete movies from iTunes library? I have moved them to the iCloud and now only seem to have the option to hide the icon in iCloud. I am sure I chose poorly at the 'keep file' window. Please help. My Brain hurts… 18 plus movies need to go…. Thank you.

Instead of removing the music from the cloud or the iTunes library why not shuffle your music using a Smart Playlist which excludes the holiday music, or tracks that are not checked. For example, use this very simple Smart Playlist:

I am trying to delete multiple photo albums from itunes and cannot locate a delete method on the itunes page. I tried deleting from my iP4 but cannot locate a delete tab other than the one on the camera roll section. Any suggestions would be a help

I am trying to remove photos from itunes so I can resync my ip4 and remove all the photos that were transferred from my Win7 PC when I synced the phone. No tabs on the phone to delete so I assume I will need to delete from itunes and resync the phone.
Any help would be greatly appreciated.
JM

I believe you just are able to delete them from iTunes.
Hope it will be helpful

I am unable to see any POP3 or IMAP tab when I set up an account in my iphone 4S. Hence by default all my email accounts become IMAP and the messages are deleted from the server when I delete them from the iphone.

I am unable to see any POP3 or IMAP tab when I set up an account in my iphone 4S. Hence by default all my email accounts become IMAP and the messages are deleted from the server when I delete them from the iphone.

ok sorry everyone but i solved it myself but the solution is so nuts i've posted it here to help others who have the same problem.
to setup a comcast imap account on your iphone:
go to mail, contacts, etc in settings
under accts, select add account
select "other"
new screen, choose "add mail account"
now on the new acct screen you must enter your name, email address and password for your GMAIL acct ! (yes i said your gmail acct !, or some other acct with a NON comcast address).
hit next
then the acct verifies
when verified a screen will open with all the acct settings for this acct AND @ the top of the screen are the 2 buttons > imap or POP
select imap and THEN CHANGE ALL THE ACCOUNT information to the comcast account !
then hit next and the account will take a couple minutes to verify but it will verify and now you have a comcast imap acct set up on your iphone. The problem must be that when the iphone sends the initial verify acct info to comcast (if you enter that information first) the comcast server is simply not setup yet to signal the iphone that there is an imap option.

Hide/delete tab from My travel profile (FITP_PROFILE) iView

Similar Messages

Maybe you are looking for