Hide field - Financial conditions

Hi,
I am working with the transaction F9COGR2, and I created a condition with a codition type 500200 and amount category 115060 (Pro Rata Amount). I want to know Is it possible to hide the amount field, if so, How I can do it?
I would appreciate your help.
Regards,
Natalia.
Edited by: Natalia Duran on Oct 24, 2011 5:21 PM

I wrote this in the click method but I get an error :
var cnt = data.form.TABLE.line.instanceManager.count;
cnt = cnt; //zero-based index
for ( var i = 0; i < cnt; i++) {
if ( i == this.parent.index )
if ( data.form.TABLE.line.BUTTON == "X" )
data.form.TABLE.line(i).new_field = "visible" ;
else{
data.form.TABLE.line(i).new_field = "invisible"

Similar Messages

How to hide field dynamically in a report while using JRC

Post Author: prateeti
CA Forum: JAVA
How can I hide fields in a report dynamically?Say my report now contains 3 fields(columns). Some users want to see the 1st and 3rd column and the 3rd column must be adjusted accordingly so that it appears where the2nd column previously was.Is there any way of doing such thing using API's from JRC.I am not using RAS.
Thanks.

Post Author: something_stupid
CA Forum: JAVA
Hi,
you could to this while designing your report in CrystalReports. Pass the user's choice as parameters to your report on runtime. This parameter is evaluated and changes visibility and position of columns conditionally. Actually haven't done this with visibilty and position but with strings to display conditionally.
good luck!

HCM interactive Forms - hide fields and backend connection

Hello,
we plan to implement a personnel transfer workflow based on interactive forms. Because in one step the user should not be able to see a couple of fields, it is possible in interactive forms zu hide fields based on the users role?
I read a lot the last days but what I still havent found out and I hope you can push me in the right direction is, how the connection between backend and Form is working.
Inside of an example form and in the documentation is descriped to use this below code to implement a bushbutton and the send message to create a server round trip. But if I create 2 pushbuttons with the same code, how do I know which button was pressed? Or do I have to create my own events somewhere? Or is there only this one event and I have to set a hidden field with some value via javascript or formcalc to find out whats going on in the form?
$record.CONTROL_PARAM.ISR_EVENT = "USER_EVENT_CHECK"
ContainerFoundation_JS.SendMessageToContainer(event.target, "submit", "", "", "", "");
best regards,
Kai

Hey Rajesh
I'm not sure it will work - but its worth a try.
Every time i wont to hide some subforms or UI elements - I determine them as "invisible" by default - and when the conditions are right - I turn them to "visible" (negatively way).
Hopefully it will help you.
Eyal

Show/hide fields when selecting an option from a drop-down menu.

Hello Gurus!
I have a question about creating a Java Script withing Acrobat pro. This is what i would like to do: I created a drop-down menu with several selection entries. Upon the customer making one of the selection entries, i would like for the correct fields that i created to become visible and all other fields to hide. Is this even possible to do? The reasoning behind this is because we have a form that customers have to generate in order to request access to certain financial accounts; we have over 20 different types of accounts and for each instance the customer has to fill out the same form. By creating a drop down menu, i can use the same form by just changing the drop-down selection and clicking on the designated fields for that selection. At this time i have over 20 different forms that poing to 20 different account requests and i would hate to send the form 20 different times to one person. The reason i can not add all fields desired for all accounts is due to the fact that the form would be filled with hundreds of checkmarks and instructions thus making the process too tideous for the customer. Hope you guys can help out.
~Vader

The good news is, it can be done (and it has been done).
There are a few things to be aware of, however.
The most important is that the form must be planned well, which means that you must think carefully about your logic and even more so about your field naming (hierarchical field names are your friend). One fundamental issue, you have to be aware of, is that this form no longer will be a "standard form". The consequence of this is that you may have to be aware that you might get into trouble when you have to prove that your user filled out that particular standard form (talk to your compliance and forms management people about that).
You also may have to decide whether the form should be usable in Reader. And, if so, how much you want to spend on the right to do so. You will see below why…
There are actually two approaches for dynamically showing/hiding parts of a form. If your form can be separated between a fixed first page (where you also have the account type selection), and a variable part (depending on the selection), you could use Templates, which you spawn according to the selection, and delete pages when you change the selection. This approach is very easy to implement, but requires Reader Extensions Server to allow it to work in Reader; Acrobat Pro's extended rights are not sufficient for that.
The other approach is showing/hiding fields. If you did your homework well, it would be very easy to first hide all subsequent fields, and then show the ones you need in two lines of code. This approach does not require extended rights for Reader at all, as long as your forms will always have the same number of pages, for each of your account types. This approach also works for the cases where the differences between the individual forms are very small. It does also work for showing/hiding bigger chunks of the form. In that case, you might create the "background" separately, and then put it as an icon into a button field which you will show/hide together with the carefully placed on top of it active fill-out fields.
There is a third possibility, which Adobe Propaganda probably would suggest, and that woudl be subforms in LiveCycle Designer. The consequence is, however, that you won't have PDF forms, but proprietary XFA forms instead. And you may have more developing and maintenance work than with the other approaches.
Back to your original question: you could use a Keystroke script evaluating event.changeEx of the combo box field. Depending on that, you would run your action to set up the according form part. The other way to do it would be evaluating event.value in the onBlur event. The latter would have the advantage that the selection has been made, and you get a bit more time to set up the form (this may in fact be an issue, particularly with Acrobat 9 and 10, which may take their time to show/hide fields).
Another possibility instead of a drop down (combo box field) would be a popup, where you would have a button to press, and the list of selections pops up. This second method uses app.popUpMenuEx().
Hope this can help.
Max Wyss.

How can I hide fields when printing?

On a form I have created for our field staff, we have many conditions of what options will show based on different selections on the form. When printing their responses, the entire form prints, even with items that have nothing to do with the selection as they were hidden from the person filling out the form. How do I hide/ suppress these blank fields?

Hi,
Thanks for asking. FormsCentral currently only support hide fields in html form, not pdf form. So printing from a pdf form would show all fields.
Regards,
Perry

Condition Category field in Condition type config

Hi,
Can any body detaily explain me what is mean by
condition category and what is the use of it?
I think, there is a relationship between price manually editable and condition category?
Laxman

Hi,
Definition:
The condition category defines how a condition (for example, charge or interest) is calculated. Condition categories are the central element of financial conditions, which determine the basic functions of the conditions that are based upon them.
Use:
The system uses the condition category to control the function for calculating a condition and makes available the input fields required for defining the corresponding condition.
If an amount category is assigned to a condition category, then the condition category can be used to calculate amounts. If a date category is assigned to a condition category, then the condition category can be used to calculate dates.
Regards
SD

How to use SHD0 to hide fields / tabs in CRMD_ORDER

Hi, i have to hide some tabs and fields for some users when executing tx. CRMD_ORDER. I have read that i should use tx SHD0 but don't know how it works...
What i have to hide is the following:
- Sales order's Header: filed "net value" in tab General.
- Sales order's item: Tab Item Overview, tab Prieces, tab Conditions, tab Billing.
Can anyone help me or explain how to use SHD0 or tell me what other things can i do ???
Thanks in advance....

Hi,
SHD0 is used to create transaction variants. With this transaction you can control the display and modifications of screens, screen fields, buttons, menus and any other gui elements that are used in transactions. The settings can be saved as variants and can be used accordingly. for eg: You can maintain different transaction variants for different users.
Following are teh steps to create transaction variants.
1. In transaction SHD0, enter the transaction name for which you want to create a variant. Give a variant name.
2. Then press "Create" button on the application tool bar. This would run the transaction.
3. Enter values in transaction and run it as usual. After every screen or tab, there will be a pop up displaying the screen elements and the options. Eg. If you want to hide Field 1 in screen 1 then against field 1 check the option "Invisible".
4. After all teh screens are through, save the transaction variant.
5. This variant will have to be assigned in customizing to the transaction so that it applies to teh transaction and you can see the changes.
Hope this helps.
Thanks,
Rashmi.

Hide a column conditionally to parameter value

Hi experts,
I'm new to Discoverer and I'm working with Disco 10.1.2.3.
I need to hide a column conditionally to a parameter value, and I'm turning around for time.
I can't find how to do this.
I have tried few things with Conditional Formatting but unsuccessfully.
If someone could give me a clue....
Thanks in advance
Brice

Thanks Rod for your answer.
I'm really sad to know that we can't hide a column in Discoverer, which for me seems to be a basic thing for such a tool.
A Decode could be a good idea but the fields I would like to show/hide are part of hierarchies,
and after few try I have seen that if I applied function on a field which is part of a hierarchy,
Disco doesn't show it as a Hierarchy (I cannot Drill).
That's why I was searching to put my 3 hierarchies fields and then hide 2 of them conditionally to a parameter value.
If someone have an idea ...
Thanks again Rod,
Brice

Key fields and non-key field of condition table

Hello Gurus,
what is key fields and non-key field of condition table?
thanks very much!

Key field
Each condition table contains keys that can be used for creating dependent condition records.
for example let take condition type PR00.
PR00 uses access sequence PR02 .
Access sequence PR02 has following tables associated with it namely 304, 305 & 306
When you create a conditon record for PR00 with transaction VK11 or VK31, you have a button 'key combination' which is nothing but fields associated with tables 304, 305 & 306.
In brief, Condition records are always created using specific keys. Condition tables are used to define the structure of the keys of a condition record.
Non key field
For example take condition table 144 - sales deal basic data.
Table 144 is associated with access sequence PBUD.
If you check the fields associated with this table (click technical view button), there are three fields at bottom which do not have 'key' check mark -KDATU, PLTYP, KSTAF
So, when you create a condition record for PBUD, system does not propose these 3 fields in 'key combination' and hence are non key fields.
Please reward points for good answers as this would help increase the total donation that SAP will make to the United Nations World Food Programme.

How to hide fields in Table maintenace screen

I have created a view with table maintenance generator. I would like to hide some fields. With event I am able to fill in those fields but I want to hide those from screen.

HI,
This is reff with ur below post, I have been stuck with same problem,
I got your code, how its functioning, but didn't get get where i have to write it.
plz tell me in brief.
Thanks in Advance.
Regards
Vivek
Re: How to hide fields in Table maintenace screen
Posted: Feb 6, 2009 11:42 AM   in response to: Aarti Ramdasi in response to: Aarti Ramdasi
Click to report abuse...             Click to reply to this thread      Reply
Hi,
You can hide the fields like this..
For example
select-options:
s_carrid for spfli-carrid modif id gr1,
s_connid for spfli-connid modif id gr1,
s_cityto for spfli-cityto modif id gr2.
I am going to hide last fied..To do this
at selction-screen output.
if s_carrid is initial or s_connid is initial.
loop at screen.
if screen-group1 CS 'GR2'.
screen-active = 0.
modify screen.
endif.
endloop.
endif.
whenever u click on any one of the field i.e. carrid or connid the third field will displayed.Otherwies the last field cityto is not visible initially
Regards
Kiran

Is it possible to add text field in condition type in PO?

Dear Guru,
Please kindly advice. Is it possible to add text field in condition type?
I mean I have seen condition type "FRB1" Freight value in the condition detail we can input vendor code.
So I would like to know is it possible to add text field in condition detail and how to set it up.
Thank you very much.

We would like to maintain some text in condition because of we would like to get that text to PO print out and we don't want to do enhancement.
Ex: Condition Type: ZZZZ Insurance
PO Print out show
Item No.          Desc                                                  Qty Unit Price Amount
10                 Item description                                  10000   10         100000
20                 Item description                                  10000   10         100000
30                 Item description                                  10000   10         100000
                     Insurance <<Description about insurance>>                  9,999
Edited by: Saiyaman on Oct 1, 2009 1:35 PM
Edited by: Saiyaman on Oct 1, 2009 1:36 PM

How to hide fields in product master data

Hi gurus,
could you please tell if it's possible to hide fields in Product maintenance (tr. COMMPR01).
It's necessary to hide some fields in a standard Set type.
Thanks in advance, Sunny.

Hi, TooCan and K.narsimha rao,
I've tried to use transaction variant. It really helps.
Thank you!
It was better for me to find some customizing in SPRO but as I understand there is no such.
Reward you
Best regards, Sunny.

How to hide fields in UIX form

Hi
I need to update the table with last_updated_by and last_updated_date every time if any change to the record. But I do not want to show these 2 fields on the screen.
Could you help me how to hide fields in UIX form/any procedure to insert the data to database with out placing them in the screen .
Thanks in advance.
NRK

Now that you mention it ... the rendered flag will stop the field from being rendered. So it's not even in the page. Stupid me.
Have a look at formValue. These are rendered, but invisible fields in a form. That should do it (hopefully).
In prepareForDML() you could simply call the setter of your date attribute that stores the date of the last update. There you pass the current date, or you could fetch the sysdate from the database and pass that. If you go that way, then the EntityImpl could make these adjustments automatically when inserting or updating and you wouldn't even need these fields/bindings in your UIX page.
Just check what the operation is, and if it's an update or insert then call the setters of the attributes you want to update. Then call super.prepareForDML(). Something like that.
It all would happen in the middle-tier, client not involved.
So formValue should work, and the prepareForDML() stuff should also work. Don't know which way you want to go.
Sascha

Select field and hide field at data source ganaration for LO extrction

Hi GURU,S
Could any one tell me what is differce between select field and hide field at data source ganation in LO at r3 side.what happend if u select field and hide field.
Regards.
hari

Hi Hari,
If you choose Select fields, you'll be able to filter this IO in Selection tab of infopackage (set IO's value(s) to be loaded).
In case of hide field you'll not have it in the transfer structure at all.
Best regards,
Eugene

Additional Field for Condition Record ..............

Hi Gurus
Plz read the Question Properly
I know that for adding a new field as key field for condition record , one needs to append the structure( main ) KOMPAZ so that the field appears in KOMP structure .
Say want Shiiping Point as one of fields in Condition Records. ....VSTEL field
Now when the field appears in KOMP , then we can CREATE CONDITION RECORD FOR THE SAME
FOR EG: *SALES ORG - DISTRIBUTION CHANNEL-CUSTOMER-SHIPPING POINT-MATERIAL..... BASED MATERIAL PRICING
WHAT I FAIL TO UNDERSTAND
1.WHY WE PASS SHIPPING POINT ( VSTEL) FIELD FROM LIKP -VSTEL TABLE TO NEW FIELD DEFINED.
2.LIKE SALES ORG/ DISTRIBUTION CHANNEL ALSO ARE DEFINED IN ENTERPRISE STRUCTURE AND VALUE IN CONDITION RECORD IS PICKED FROM THERE ONLY, WHY NOT SHIPPING POINT.
WHY THIS ??????....
Supply the new field you defined by including the following source code line in
USEREXIT_PRICING_PREPARE_TKOMP:
MOVE xxxx-VSTEL TO TKOMP-ZZVSTEL.
In order processing you find the user exit in Include MV45AFZZ, and in billing document processing you find it in Include RV60AFZZ.
Regards
Rohit

> Plz read the Question Properly
I read the question properly ;-).
> WHAT I FAIL TO UNDERSTAND
>
> 1.WHY WE PASS SHIPPING POINT ( VSTEL) FIELD FROM LIKP -VSTEL TABLE TO NEW FIELD DEFINED.
The first thing you need to understand is that the condition records value is not based upon the the enterprise structure which you have defined. Rather it will pick value from the sales documents which we have created. The reason behind including this LIKP-VSTEL is that only, Just imagine, where you are using condition records??? in Sales order, in delivery, in billing..... and based on the data passed in these documents your condition records will be populated.
Again for example : you have maintained record for Sales org 1000, DC 10, division 00 shipping point 1000 then the record will come into the document provided the document should fulfill these all.
I hope this will make you understand this.
> 2.LIKE SALES ORG/ DISTRIBUTION CHANNEL ALSO ARE DEFINED IN ENTERPRISE STRUCTURE AND VALUE IN CONDITION RECORD IS PICKED FROM THERE ONLY, WHY NOT SHIPPING POINT.
No the records are only coming from the Sales documents. only.
Thanks,
Raja

Hide field - Financial conditions

Similar Messages

Maybe you are looking for