Hide field for " Change Number". RMMG1-AENNR " in MMR

Hi,
In MM01 and MM02, i want to hide field for " Change Number".
I tried in OMSR and OMS9, but i could not find field "RMMG1-AENNR".
Hw to make it hidden.
Uts
Edited by: Utsav.agra on Jun 1, 2009 9:17 AM

Check is your problem can be solved by Screen or transaction configuration?
T Code is SHD0

Similar Messages

Verification field for Batch number - Transaction LM05

Hi Experts,
Can some one help on the issue of adding a verification field for BATCH NUMBER on the screen 2502 and make it work.
Requirement : Add Verification field for batch number and build the logic to verify the batch number - as the SAP standard does for other fields.
I have proceeded to some extent and seems like I am not winning.
Steps done :
1. Copied physical screen 2502 (SAPLLMOB) to screen 9502(SAPLXLRF)
2. Changed the screen to subscreen and removed the OK_CODE from the element list.
3. Created the project ZMWMRF502 and assigned user exit MWMRF502 to this project.
4. In the components of the project assigned 9502(SAPLXLRF) to 1502((SAPLLMOB).
5. Assigned the screen 9502 to logical screen 0502 in the config.
6. In the transaction LRFMD given the username and variant '1'.
Now When I execute the transaction LM05 and give the TO number, the system calls my screen 9502 with new field seen in that.
But the screen is completely greyed out with no data in that.
I checked PBO and PAI of my new copied screen.
In all the modules which I received from the copy of SAP standard screen there is no code except name.
I mean to say that names of all modules exist but when I double click on any module it ask me to create a new object.
If I have to create module similar to SAP there is a lot of coding in side. How do I proceed further.
Can some help me.
Thanks and regards
Joshi

Hi Dez,
If you go in to transaction LM05 and input a number of TRANSFER ORDER, it will take you to a screen where the system will populate the fields pertaining to that particular transfer order. In that screen we have normal fields as well as verification fields for that particular field. These screens are used on scanners. When the scanner scans the material slip, the corresponding value such as material number, storage bin number etc will be get populated in the verification field. When the user selects next then the system will perform a check for the two values and pops up an error message if required.
So there are verification fields for material number, storage type, quantity etc but not for batch. Our user requirement is to put a verification field just by the side of batch number field and perform same operation as it does for other fields.
Hope you understood.
Thanks and regards
Joshi

Field For SSn number

Hi All,
Can anybody please tell me the field for SSN number.And in whcih table it will stored.
I have srached in PA002 but it is not avaliable.
Can anybody help me.
Thanks,

Hi,
This field is applicable to US. You would find this in IT0002-Pesonal Data. If the country grouping is 10, you would automatically get this field in IT0002.
Regards,
Suhasini

Where is the field for changing the password?

Hello. I went to my control panel today and I can't find any field for changing my password. How do I change? Where? Thanks.

Hi, I am logged in and I can't see any "Account" link
in the upper right side of the page. All I can see
are the Sign out, Your Control Panel, Search and FAQ
links. I clicked on "Your Control Panel" link and I
see I can edit my Handle, Name, Email, etc. but I
don't see anything related to password. Plus, there
is no "Change Password" link in the upper right side
of the page under the "Log out", or the "Sign Out"
link.I agree that Oracle could have made it a bit more explicit. Instead of
To change your password, make sure you are logged on and click the "Account" link in the upper right side of the page.
they should have said
To change your password, make sure you are logged on and click the "Account" link in the upper right side of this page. (This page = the one you are reading when you see the FAQ about changing the password.)
I have to admit that it is strange the Account link appears on every OTN page, every Education.oracle.com, every www.oracle.com page ... but not on a forums.oracle.com page
Message was edited by: Hans Forbrich
(The term 'every' meaning 'every one I remember seeing the account link on' <g>)

User exit to open field for change / ready for input in delivery

Hi !
We need to open a field for change / ready for input in the header level of a delivery after it has been goods issued. Is there a BADi / User exit that can open a field for change / ready for input in the delivery after the delivery has been goods issued ?
Regards,
Ashok.

Hi,
As per the SAP Process it is not recommendable to edit the closed delivery. In order edit the devlivery you have to cancel the post goods issue and then update the same.
So there is a option like in PBO user-exits, we can force the status fields values and open up the delivery fields. But this would lead to inconsitency.
If you are updating just any information, you can always use the Text fields in header or items to update at any time of delivery processing.
Regards,
Sivparatap

Adding Custom Fields for Change Request in EHS

Hi,
I need to add custom fields in Change request screen, where I am not able to identify for BO and node to do same.
Its Configuration name /MOC/F_ISS_ROOT_OBJECT_INFO.
I tried with /IAM/ISSUE and /IAM/ACTIVITY BO.. but it is not working.
Not able to identify the correct table for adding fields.Pls help me on the same.
Regards,
Reny Richard

Reny,
Why don't you check for the ST05, so that you can grasp some of the table names. Should be useful to you
http://scn.sap.com/community/abap/testing-and-troubleshooting/blog/2007/09/05/the-sql-trace-st05-quick-and-easy
BR,
RAM.

Field for invoice number

hi all
can any body say wht is the relevent R/3 field and corresponding infoobject for "INVOICE NUMBER"
thank you
regards
Pradeep

Hi,
Invoice number = VBELN = Billing Document in VBRP table.
so you can use either of these two infoobjetcs.
VBELN = 0DELIV_NUMB
VBELN = 0BILL_NUM
Thanks
Reddy

Hide fields for IT0006 is not working correctly

Hello all,
I am trying to hide following fields in IT0006 for poland.
P0006-TELNR
P0006-ENTKM
P0006-WKWNG
P0006-BUSRT
P0006-ENTK2
P0006-HSNMR
P0006-POSTA
I have set up feature p0006 properly iand selected right buttons in T588M.
There is no alternative screen (2046) available for poland. User parameters are also correct for MOLGA and UGR.
However, when i go to PA20 or PA30, the above fields still appear on the infotype screen.
When i do same settings for another country, the screen is hiding these fields ( for example China).
Can you please guide ?
Thanks in advance
JG
Edited by: joy gomez on Apr 26, 2010 7:04 PM

Hello Joy, Please check the module pool you are using is correct one and the return value of the feature P0006 is maintained in the table t558m. I had the same issue with poland infotype. We afterwords took help of abaper - abaper hided it by screen painter - licence key is required for that.
Jaydeep
and p0006 not only saved but activated
Edited by: Jaysaphr on Apr 27, 2010 6:39 AM

Hide field for applications of ESS

Dear Experts.
We have several type of employees in the company. Employees A1 and A2. The company want that for the employees A1 the portal display all the fields for the service of Address, but for the employees A2 the portal hide two fields in the service of Address.
How can do this?
Regards
Carmen

Hi Bala.
I differentiate these employees by the filed Employee Group(P0001-PERSG).
When you says create two applications, Is do the that suggestion Stuart:
"Ctrl and Right Mouse Button (WD Personalization) , This is user level personalization "
Or When you say create two applications is modify the applications using WD Java ?
The applications are the following for Mexico(MX):
Personnal Information ===>
                                           Address] Address
                                           Bank Information] Bank Information
                                           Document: Personal Data] Personal Data
Best Regards.
Carmen

CC01 Change type is in hide mode for Change master

Dear All,
Our requirement is to get the list of Change type in the CC01 T-code when we click the change master. When we select ECR then we are getting the change list of change type. But, when we select the change master as type, then change type is coming as grey field. So we want the list of change type in change master
Please suggest
Regards
Honyal

Hello Honeyl,
Try to understand the logic of ECR (engineering change request).
*Change Type*
    This key defines the change type for the ECR (engineering change request).
*Dependencies*
    If you change objects with reference to an ECR, you control the change process using the following statuses:
    o   System status
    o   User status, if the change type has a status profile assigned to it
        in the IMG
    The system performs workflow tasks if defined.
    Note:
    You can only replace the change type with another change type if the
    following data is identical in both change types:
Status profile
Workflow task
Signature network
You can replace a change type without a signature network by a
change type with a signature network.
It means when you are intended to use the ECM with Statuses like CHKD ECRA ECOP And wish to maintain the controls like ECR to ECO creation and approval then the ECR and statues are required and supported also. the change type decides the different Statuses for the ECR. Hence the change type will be not available with Change Master, where these all status management are skiphence the change type decides the different Statuses for the ECRed and designed for simple change request for which the simple Change master are quite enough.
Kindly go through the Glossary help for them both.
Change Master:-
Data record which contains all the information required for managing a change.
It contains descriptive data (such as reason for change) and data with control functions (such as valid-from date and indicators for object types). In addition to this data, which you can maintain directly, there is also data which the system updates automatically (such as administrative data).
ECR:-
Change master record created with reference to a change type, which defines a specific procedure for the change.
You cannot process change objects with reference to an engineering request (ECR). The person responsible must approve the ECR and convert the ECR to an engineering change order (ECO).
Regards,
Shyamal

Reading T588M hide fields for MOLGA/feature/variable key & HIDE custom flds

Hi
    I have requirement to read hide fields from T588M . As we can hide filed in T588m and we already have written a program in which it called certain feature from PE03 for IT0002 and hide the filed based on the user authorization . Now I have introduce another field which some how the same as in SAP standard screen , for some good reason and according to business process it was not full filling the requirements . So I introduce another field. Now what we want in PBO of IT enhancement it stop certain users to see that fields using feature ( Tr.Pe03 Feature p0002 ) . In feature we have programmed that it call our customized program and check the authorization as mention earlier .
Herere my questions
-     Do you guys have any other good option to control that?
-     If some how I manage to read feature using FM HR_FEATURE_BACKFIELD in PBO
-      After reading feature I am accessing the table T588m to make sure for certain feature which field is hide or not as in table T588m I can see the fields like +-, , how can I make sure which field is refer to what I also find the FMS
-      HRPAD00SCREENCONTROL
-      HR_READ_T588M_WITH_PME04
-      HR_T588M_CUSTOMIZING
-      HR_T588M_GET_DYNPRO
-      HR_T588M_GET_FIELDATTRIBUTES
-      HR_T588M_SAVE
-     But the above Fm also not fulfilling my requirement. As I was thinking that I read the fields , SAY if standard field is hide in the feature , I can loop at my screen and hide the custom field which I enhanced in IT0002.
Right now Im debugging the standard code how its reads the T558M , and I got some clue .. But it looks like long path I mean reading some screen fields.. Include program is L0PXVF01.
Now my question is do you guys have any good solution, it might possible Im doing it using the short path .. ( Cuz I wna use my security program as its using feature )
Let me know if u have some idea
Thanks
Saquib Khan

1- Well Im thinking that I have to compare T558M on the base of Feature and variable key . And see that standard field is hidden... if it is .. I want to also HIDE my custom field ....
2- For our feature "p0002" , we have developed a custom code in which on the basis of variable key and user profile it get executed and also see wther that person has authorization to see that standard field or not . if say that person doesnt have authorization for that field I can also hide mine custom field.
I just got the test login and Im going to test it by add/removing security roles .
<b>
I tried that out but if Im looping at screen , its behaving same for both users . Cuz there is nothing which tells ok for this user fild is hidden in T558m and its open for other one..
Also, is there any FM if I pass Dynpro # , molga and variable key , it return me T588M hidden fields ...
I already tried the above FM
This looks like to work but not working for field
HR_T588M_GET_FIELDATTRIBUTES</b>
Thanks for valuable input!!
Saquib

Add field for tracking number while Auto PR generation via MDBT

Hi,
While running MRP through MDBT via Variant , my PR's are generating automatically....
Now i want one field as tracking number ( Value-100) to be added in PR when ever my PR's are generating automatically via MRP run...
Is it possible..
Utsav

Hi,
My question is :
While running MRP through MDBT via Variant , my PR's are generating automatically....
Now i want one field as tracking number ( Value-100) to be added in PR when ever my PR's are generating automatically via MRP run...
When ever my PR gets generated via MRP run thrugh variant in MDBT, i want 100 value to be filled in tracking number field...
Is it possible.
Utsav
Edited by: Utsav.agra on Sep 15, 2009 5:49 AM

Hide fields for activities when they are opened via Activity Monitor

Hi,
In CRM 5.0, my requirement was to hide a number of fields from activity display via transaction CRMD_ORDER & CIC0 (SAPGUI based transactions). I achieved it by using screen variant. I assigned my screen variant to different transactions (CRMD_ORDER, CIC0 etc.), and things were working fine.
But when I open activity monitoring report (transaction S_AE2_89000019), search for some activities and open an activity by double-clicking in the report, the hidden fields become visible. Although, the transaction being displayed in CRMD_ORDER.
I couldn't enable my transaction variant for transaction S_AE2_89000019, obviously because this is a report transaction which in turn opens activity when we double-click on the grid.
Any idea how to avoid these hidden fields being displayed via S_AE2_89000019?
Regards,
Kaushal

Hey Kaushal,
Let me first inform you the following:
1) Transaction Variant are associatated to Dialog transactions only......Which means when u call report which eventually refers the same transaction even then the transaction variants is not called....
For the whole transaction variant to workout, you need CALL transaction " ..."....
2) The transaction S_AE2_89000019 is not a dialog transaction, its a parameter transaction which eventually calls a report AQZZ/SAPQUERY/SMCRM_REP_ACT1==
3)This report in turn uses the call to FM CRM_1O_CALL_FOREIGN which launches that crmd_order transaction screen and not crmd_order transaction..
You can enchance that report by creating a z report and inside that z report you can fulfill your requirement..
Inspire ppl by reqwarding..
Regards,
Anand...

Hide Fields for Applications WD ABAP Travel

Dear Experts.
I have the following doubt:
Is posible hide the fields enclosed in the box red using configuration of the following image for the application WD ABAP (Change Travel Request):
[Image|http://img513.imageshack.us/img513/1859/hidefields.png]
General Information About the Application and Component
Application: FITE_REQUEST
Web Dynpro Component: FITE_UI_SUMMARY
Window Information: AMOUNTS
View Information: AMOUNTSVIEW2
Configuration ID: F3C03EF7AE5E8F48A716EECAFD7E99BD
I tested using personalization (Ctrl + Right Clic), but this hide the label Total Travel Expenses, but not hide the values 0,00 USD and 560.000,00 COP.
I created a Implementing Enhancements in the View, delete the Element, but this not work and display message of error. I checked the following information of help:
http://help.sap.com/saphelp_nw70/helpdata/en/3a/f6ba42a950da11e10000000a155106/frameset.htm
And undo the element deleted
Someone have a suggestion for solve my issue?
Regards

Dear Expert.
The method CREATE_AMOUNT_UI have three methods:
me->add_currency_uielement(
iv_attributevisibility = l_attributevisibility
io_container = io_container
iv_currency = iv_currency
iv_design = l_design
iv_id = l_id
iv_indextoinsert = l_indextoinsert
iv_color = l_color
CLEAR l_id.
CONCATENATE l_idprefix 'amount' INTO l_id.
me->add_amount_uielement(
iv_id = l_id
io_container = io_container
iv_indextoinsert = l_indextoinsert
iv_attributevisibility = l_attributevisibility
* iv_amount = l_amount "MAHN1310083
iv_amount = lv_formatted_amount "MAHN1310083
iv_design = l_design
iv_color = l_color
CLEAR l_id.
CONCATENATE l_idprefix 'minus' INTO l_id.
wd_this->add_minus_uielement(
iv_id = l_id
io_container = io_container
iv_indextoinsert = l_indextoinsert
iv_attributevisibility = l_attributevisibility
iv_show = iv_minus
iv_design = l_design
iv_color = l_color
ENDMETHOD.
In runtime I did clear the value of the fields l_id and L_ATTRIBUTEVISIBILIT = VISIBILITY.TRIP_TOTAL.
But the system follow showing the field Total Travel Expense.
I want know what is the attribute that I should change for not display this label and value/?
Thank in advance
Regards
Carmen Guerrero

Costum field for change request

Hello,
how can I add a custom field to the change request form? The field will be used for an internal process number.
Thanks in advance!

Thanks it solved my problem!

Hide field for " Change Number". RMMG1-AENNR " in MMR

Similar Messages

Maybe you are looking for