Hide field in T-CODE: MM01

I want to hide profit center field in MM01,the view is Sales: General/Plant Data.
The field is required,so it still show a message when i have hide the field.
what can i do,Please Help! Thanks!

Hi Elven,
Use T-Code OMS9.
in Field sel. group enter 117
Then scroll to MM01 in the table below it and select Hide.
regards,
Aabhas

Similar Messages

We want only Division field Mandatory in Basic Data 1 View (T Code MM01)

Hi,
In Logistics u2013 General-> Material Master-> Field Selection-> Maintain Field Selection for Data Screens, for Field sel. group 90, we selected the Reqd Entry Option Button to make Division field in Basic Data 1 as mandatory.
Due to this fields like Sales unit, Unit of Measure Grp, DChain-spec. status etc. became Mandatory for T Code MM01
We want only Division field Mandatory.
Is there any way to create our own Field sel. Group where in we could assign the Fields we want to make mandatory?
Please guide.
Regards,

Hi ,
Goto the Traansction code OMS9 and enter the FIELD SELECTION GROUP as 20 which is the field group for Division
now goto the details and in change mode you can find the FIELD like HIDE, OPTIONAL, DISPLAY , REQUIRED ENTRY
Chcek the radio button of Required field entry and save it
Now once you enter the MM01 , there you will find Division as Mandatory field
regards,
santosh

Hide field for " Change Number". RMMG1-AENNR " in MMR

Hi,
In MM01 and MM02, i want to hide field for " Change Number".
I tried in OMSR and OMS9, but i could not find field "RMMG1-AENNR".
Hw to make it hidden.
Uts
Edited by: Utsav.agra on Jun 1, 2009 9:17 AM

Check is your problem can be solved by Screen or transaction configuration?
T Code is SHD0

How to hide fields in Table maintenace screen

I have created a view with table maintenance generator. I would like to hide some fields. With event I am able to fill in those fields but I want to hide those from screen.

HI,
This is reff with ur below post, I have been stuck with same problem,
I got your code, how its functioning, but didn't get get where i have to write it.
plz tell me in brief.
Thanks in Advance.
Regards
Vivek
Re: How to hide fields in Table maintenace screen
Posted: Feb 6, 2009 11:42 AM   in response to: Aarti Ramdasi in response to: Aarti Ramdasi
Click to report abuse...             Click to reply to this thread      Reply
Hi,
You can hide the fields like this..
For example
select-options:
s_carrid for spfli-carrid modif id gr1,
s_connid for spfli-connid modif id gr1,
s_cityto for spfli-cityto modif id gr2.
I am going to hide last fied..To do this
at selction-screen output.
if s_carrid is initial or s_connid is initial.
loop at screen.
if screen-group1 CS 'GR2'.
screen-active = 0.
modify screen.
endif.
endloop.
endif.
whenever u click on any one of the field i.e. carrid or connid the third field will displayed.Otherwies the last field cityto is not visible initially
Regards
Kiran

HCM interactive Forms - hide fields and backend connection

Hello,
we plan to implement a personnel transfer workflow based on interactive forms. Because in one step the user should not be able to see a couple of fields, it is possible in interactive forms zu hide fields based on the users role?
I read a lot the last days but what I still havent found out and I hope you can push me in the right direction is, how the connection between backend and Form is working.
Inside of an example form and in the documentation is descriped to use this below code to implement a bushbutton and the send message to create a server round trip. But if I create 2 pushbuttons with the same code, how do I know which button was pressed? Or do I have to create my own events somewhere? Or is there only this one event and I have to set a hidden field with some value via javascript or formcalc to find out whats going on in the form?
$record.CONTROL_PARAM.ISR_EVENT = "USER_EVENT_CHECK"
ContainerFoundation_JS.SendMessageToContainer(event.target, "submit", "", "", "", "");
best regards,
Kai

Hey Rajesh
I'm not sure it will work - but its worth a try.
Every time i wont to hide some subforms or UI elements - I determine them as "invisible" by default - and when the conditions are right - I turn them to "visible" (negatively way).
Hopefully it will help you.
Eyal

Find obligatory fields in the transaction MM01

Hi,
My requirement is to create a Z table which will store all mandatory fields from the transaction MM01.
Is there a way to know which fields are mandatory without being in the transaction MM01 or OMS9? In which system table is this information saved?
Regards,
Roberto

Hi,
For writing a substitution exit code you will need the help of your ABAPer.
Use T Code GGB1 to create a substitution. In the application Area select Financial Accounting --> Line item.
Create a substitution for your company code. Under Substitution Create Step. When you click on step it will give you a list of fields in BSEG table. Select field name XREF1 or XREF2 or XREF3 any one. In the next screen select "Exit". In the Prerequisites give conditions as BKPF-BUKRS = 1000 (your company code).
In the Substitution select your exit code against your XREF1 or XREF2 or XREF3 field.
While writing the exit code you can give the logic as select BSEG-KUNNR and pass to table KNA1. Then populate BSEG-XREF1 with KNA1-NAME1
Save this substitution and activate it in T Code "OBBH"
While writing Substitution exit copy the standard program "RGGBS000" and create your Z program. Write your new code in the Z program. This step should be done before you create a substitution. Use T Code GCX2 and maintain your Z program against Application Area "GBLS".
Also see to it that the Reference Key1 / 2 / 3 field is made optional in all the Posting Keys and Field Status Groups.
Please let me know whether this helps.
Regards,
Swapnil

Show/hide fields when selecting an option from a drop-down menu.

Hello Gurus!
I have a question about creating a Java Script withing Acrobat pro. This is what i would like to do: I created a drop-down menu with several selection entries. Upon the customer making one of the selection entries, i would like for the correct fields that i created to become visible and all other fields to hide. Is this even possible to do? The reasoning behind this is because we have a form that customers have to generate in order to request access to certain financial accounts; we have over 20 different types of accounts and for each instance the customer has to fill out the same form. By creating a drop down menu, i can use the same form by just changing the drop-down selection and clicking on the designated fields for that selection. At this time i have over 20 different forms that poing to 20 different account requests and i would hate to send the form 20 different times to one person. The reason i can not add all fields desired for all accounts is due to the fact that the form would be filled with hundreds of checkmarks and instructions thus making the process too tideous for the customer. Hope you guys can help out.
~Vader

The good news is, it can be done (and it has been done).
There are a few things to be aware of, however.
The most important is that the form must be planned well, which means that you must think carefully about your logic and even more so about your field naming (hierarchical field names are your friend). One fundamental issue, you have to be aware of, is that this form no longer will be a "standard form". The consequence of this is that you may have to be aware that you might get into trouble when you have to prove that your user filled out that particular standard form (talk to your compliance and forms management people about that).
You also may have to decide whether the form should be usable in Reader. And, if so, how much you want to spend on the right to do so. You will see below why…
There are actually two approaches for dynamically showing/hiding parts of a form. If your form can be separated between a fixed first page (where you also have the account type selection), and a variable part (depending on the selection), you could use Templates, which you spawn according to the selection, and delete pages when you change the selection. This approach is very easy to implement, but requires Reader Extensions Server to allow it to work in Reader; Acrobat Pro's extended rights are not sufficient for that.
The other approach is showing/hiding fields. If you did your homework well, it would be very easy to first hide all subsequent fields, and then show the ones you need in two lines of code. This approach does not require extended rights for Reader at all, as long as your forms will always have the same number of pages, for each of your account types. This approach also works for the cases where the differences between the individual forms are very small. It does also work for showing/hiding bigger chunks of the form. In that case, you might create the "background" separately, and then put it as an icon into a button field which you will show/hide together with the carefully placed on top of it active fill-out fields.
There is a third possibility, which Adobe Propaganda probably would suggest, and that woudl be subforms in LiveCycle Designer. The consequence is, however, that you won't have PDF forms, but proprietary XFA forms instead. And you may have more developing and maintenance work than with the other approaches.
Back to your original question: you could use a Keystroke script evaluating event.changeEx of the combo box field. Depending on that, you would run your action to set up the according form part. The other way to do it would be evaluating event.value in the onBlur event. The latter would have the advantage that the selection has been made, and you get a bit more time to set up the form (this may in fact be an issue, particularly with Acrobat 9 and 10, which may take their time to show/hide fields).
Another possibility instead of a drop down (combo box field) would be a popup, where you would have a button to press, and the list of selections pops up. This second method uses app.popUpMenuEx().
Hope this can help.
Max Wyss.

How to hide fields on Sourcing cockpit

Hi,
Our client wants to hide some of the fileds in the Souricng cockpit which they are not using by their purchasing department. example contract, auction, info rec etc in Sourcing cockpit
How to hide this fields in Sourcing cockpit?
They wants to bring internal note to soucing cockpit sceen, it is time cossuming for Puchasing department to drill down to each SC line item in Sourcing cocpit to see internal note for SC having 100+ items.
Thanks
Ravi

Hi Ravi,
You can even use the Screen variants to hide the standard fields on sourcing cockpit.
Go to transaction SHD0--> Screen Variants.
Transaction Code: BBPSOCO01
To hide fields on the worklist the screen variant is BBP_SOCO_WL. Make a Z copy of this screen variant say ZBBP_SOCO_WL. Go inside this Z screen variant in change mode and tick in invisible box opposite to the field you want to hide. Save the screen variant.
Now go to BADI BBP_SCREENVARIANT
Method GET_SCREENVARIANT_SOCO
Assign EV_SCVARIANT = 'ZBBP_SOCO_WL'.
This will definately hide the fields. For bringing internal note , you need to create a customer field similar to internal note and assign the value of internal note to it.
Hope this helps.
Thanks,
Pradeep

Show/Hide Fields Based on Dropdown

Hi,
I am attempting to show/hide subforms with a dropdown selection. I've found a lot of information on the subject, and have ended up with this as my script:
form1.Page1.Division::exit - (JavaScript, client)
switch (Page1.Division.rawValue)
   case "1":
   SubformZZI.presence = "visible";
   SubformZZR.presence = "hidden";
      break;
   case "2":
   SubformZZI.presence = "hidden";
   SubformZZR.presence = "visible";
      break;
However, it is not doing anything when a selection is made in the dropdown box. I have the "SubformZZI" initially set as "Visible" and the "SubformZZR" initially set as "Hidden".
Any suggestions?
Regards,
ZeroZone

You have wrongly referenced the fields in your code.
Copy and paste the below code in the click event of the Submit button. It should work as expected.
The code thathas error is commented..
// First check if there are null values, then construct email using script
var vEmail = "";
var vSubject = "";
var vBody = "Attached to this email is a Field Service Issue - Parts Order Form for Job #" + Page1.JobNumber.rawValue + ".";
var vName = "";
var vCC = "[email protected]" + "," + Page1.RSM.rawValue + "," + Page1.IssueLeaderEmail.rawValue;
var vFormat = "PDF";
var errorMessage = "At least one required field was empty. Please fill in the required fields (highlighted) before continuing.";
// Check required fields and build error message
if (Page1.IssueLeaderEmail.rawValue == null)
errorMessage = errorMessage;
else
vSubject = "Field Service Issue - Parts Order Form for Job #" + Page1.JobNumber.rawValue;
// Check Division field
if (Page1.Division.rawValue == "Case Division")
     //vEmail = Page1.SendFormToZZI.rawValue;
     vEmail = Page1.SubformZZI.SendFormToZZI.rawValue;
     //vCC = Page1.SendCopyToZZI.rawValue + "," + Page1.CSTZZI.rawValue;
     vCC = Page1.SubformZZI.SendCopyToZZI.rawValue + "," + Page1.SubformZZI.CSTZZI.rawValue;
else
     //vEmail = Page1.SendFormToZZR.rawValue;
     vEmail = Page1.SubformZZR.SendFormToZZR.rawValue;
     //vCC = Page1.SendCopyToZZR.rawValue + "," + Page1.CSTZZR.rawValue;
     vCC = Page1.SubformZZR.SendCopyToZZR.rawValue + "," + Page1.SubformZZR.CSTZZR.rawValue;
// If fields required for script are null, warn user and do not initiate email
if (Page1.IssueLeaderEmail.rawValue == null)
xfa.host.messageBox(errorMessage, "Sending an email", 0, 0); // Send out a custom error message if any of these fields are null
else
// Everything is OK, send email
event.target.submitForm({cURL:"mailto: "+ vEmail +"?subject=" + vSubject +"&body=" + vBody + "&cc=" + vCC,cSubmitAs:"PDF",cCharset:"utf-8"});
Thanks
Srini

Reading T588M hide fields for MOLGA/feature/variable key & HIDE custom flds

Hi
    I have requirement to read hide fields from T588M . As we can hide filed in T588m and we already have written a program in which it called certain feature from PE03 for IT0002 and hide the filed based on the user authorization . Now I have introduce another field which some how the same as in SAP standard screen , for some good reason and according to business process it was not full filling the requirements . So I introduce another field. Now what we want in PBO of IT enhancement it stop certain users to see that fields using feature ( Tr.Pe03 Feature p0002 ) . In feature we have programmed that it call our customized program and check the authorization as mention earlier .
Herere my questions
-     Do you guys have any other good option to control that?
-     If some how I manage to read feature using FM HR_FEATURE_BACKFIELD in PBO
-      After reading feature I am accessing the table T588m to make sure for certain feature which field is hide or not as in table T588m I can see the fields like +-, , how can I make sure which field is refer to what I also find the FMS
-      HRPAD00SCREENCONTROL
-      HR_READ_T588M_WITH_PME04
-      HR_T588M_CUSTOMIZING
-      HR_T588M_GET_DYNPRO
-      HR_T588M_GET_FIELDATTRIBUTES
-      HR_T588M_SAVE
-     But the above Fm also not fulfilling my requirement. As I was thinking that I read the fields , SAY if standard field is hide in the feature , I can loop at my screen and hide the custom field which I enhanced in IT0002.
Right now Im debugging the standard code how its reads the T558M , and I got some clue .. But it looks like long path I mean reading some screen fields.. Include program is L0PXVF01.
Now my question is do you guys have any good solution, it might possible Im doing it using the short path .. ( Cuz I wna use my security program as its using feature )
Let me know if u have some idea
Thanks
Saquib Khan

1- Well Im thinking that I have to compare T558M on the base of Feature and variable key . And see that standard field is hidden... if it is .. I want to also HIDE my custom field ....
2- For our feature "p0002" , we have developed a custom code in which on the basis of variable key and user profile it get executed and also see wther that person has authorization to see that standard field or not . if say that person doesnt have authorization for that field I can also hide mine custom field.
I just got the test login and Im going to test it by add/removing security roles .
<b>
I tried that out but if Im looping at screen , its behaving same for both users . Cuz there is nothing which tells ok for this user fild is hidden in T558m and its open for other one..
Also, is there any FM if I pass Dynpro # , molga and variable key , it return me T588M hidden fields ...
I already tried the above FM
This looks like to work but not working for field
HR_T588M_GET_FIELDATTRIBUTES</b>
Thanks for valuable input!!
Saquib

MultiLookup items selected, show or hide fields dynamically

Hi,
In the New or Edit Form, I would like to show or hide fields based on the multiselect value selected.
Is there a way to add javascript to achieve this and to get the selected values to show or hide the fields dynamically?
Thanks for your help.

Hi,
According to your post, my understanding is that you want to show or hide fields based on the multiselect value selected.
You can add the code below to the new form.
<script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.11.1/jquery.min.js"></script>
<script type="text/javascript">
function Test(){
var object= $("select[title='Lookup selected values']");
var object1=$("input[title='Test']");
var text= object.find("option").text();
alert(text);
if(text.indexOf("A")>-1)
object1.hide();
</script>
<button onclick="javascript:Test();" type="button">Test</button>
Note: You need to change the title of the select and input tags.
The result are as below:
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How to restrict material master by material type t-code MM01

Hi,
how to restrict Materilal master by Material type in t-code MM01
I do restrict by M_MATE_MAR authorization object . After i see there not restrict.
Amit

>
sapvinithbasis wrote:
> hi
> plz help me out in solving this issue
> regards vinith
Vinith,
I have explained in great detail exactly what you need to do at every stage. The steps I have outlined are the same that I follow every time that I want to apply material type restrictions.
I strongly recommend that you contact your security admin to help with this, alternatively engage the services of a trained/experienced security admin who can come on site and go through this with you.
If you have done the following then it will work:
1. Assign auth group to material type via OMS2
2. Verified that check for M_MATE_MAR is active
3. Ensured that M_MATE_MAR does not contain the auth group/s which you assigned via OMS2 (that includes *)
This is the last comment I will make on this topic.
Cheers
Alex

How to hide fields in product master data

Hi gurus,
could you please tell if it's possible to hide fields in Product maintenance (tr. COMMPR01).
It's necessary to hide some fields in a standard Set type.
Thanks in advance, Sunny.

Hi, TooCan and K.narsimha rao,
I've tried to use transaction variant. It really helps.
Thank you!
It was better for me to find some customizing in SPRO but as I understand there is no such.
Reward you
Best regards, Sunny.

How to hide fields in UIX form

Hi
I need to update the table with last_updated_by and last_updated_date every time if any change to the record. But I do not want to show these 2 fields on the screen.
Could you help me how to hide fields in UIX form/any procedure to insert the data to database with out placing them in the screen .
Thanks in advance.
NRK

Now that you mention it ... the rendered flag will stop the field from being rendered. So it's not even in the page. Stupid me.
Have a look at formValue. These are rendered, but invisible fields in a form. That should do it (hopefully).
In prepareForDML() you could simply call the setter of your date attribute that stores the date of the last update. There you pass the current date, or you could fetch the sysdate from the database and pass that. If you go that way, then the EntityImpl could make these adjustments automatically when inserting or updating and you wouldn't even need these fields/bindings in your UIX page.
Just check what the operation is, and if it's an update or insert then call the setters of the attributes you want to update. Then call super.prepareForDML(). Something like that.
It all would happen in the middle-tier, client not involved.
So formValue should work, and the prepareForDML() stuff should also work. Don't know which way you want to go.
Sascha

How to hide field dynamically in a report while using JRC

Post Author: prateeti
CA Forum: JAVA
How can I hide fields in a report dynamically?Say my report now contains 3 fields(columns). Some users want to see the 1st and 3rd column and the 3rd column must be adjusted accordingly so that it appears where the2nd column previously was.Is there any way of doing such thing using API's from JRC.I am not using RAS.
Thanks.

Post Author: something_stupid
CA Forum: JAVA
Hi,
you could to this while designing your report in CrystalReports. Pass the user's choice as parameters to your report on runtime. This parameter is evaluated and changes visibility and position of columns conditionally. Actually haven't done this with visibilty and position but with strings to display conditionally.
good luck!

Hide field in T-CODE: MM01

Similar Messages

Maybe you are looking for