Hide fields at sales order document.

Dear Gurus,
My client needs a sales order by services sales, so it's not necesary some fields like "ship to party", "Req delv date", etc-
how can i disable and hide this fields?
thanks for your help.
best regards

Hi Juan,
On one hand you are right, the Ship-To-party should not matter in case of a debit note (for services).
On the other the ship-to-party can still be relevant for tax determination.
IMHO the ship-to-party in a debit note is relevant from a Reporting point of view if you want to do Sales Reporting on the Ship-to party in addition to the Sold-to party.
My recommendation: Don't mess with the standard system for aesthetic considerations.
If the Ship-To = Sold-To you will have the same data in both fields, that's fine.
If they are different, then the Ship-To party is relevant from a Sales Point of View.
Best Regards / Un cordial saludo,
Franck Lumpe
Freelance SAP Logistics Consultant

Similar Messages

What is table of Rate field in Sales Order document (VA03)?

Hello everyone!
I need to check in what table is the Rate value in the Sales Order document saved..
Unfortunately, it is not in VBAP as I first expected. Only the Net price is there, not the Rate.
Thank you very muchh!

Hi,
KONV. use vbak-knumv as the key to access the table.
Regards
Raju Chitale

Cost center field at sales order

Dear GURUs,
I require a field to copulate cost center at sales order level,so that it should copy to delivery.
Please help.
With Regards
Core SD

Dear Sir,
Thanks for the reply.
I have checked the same in
sales order > Header > account assignment
But we found
Bussiness area & WBS element in it.
can you please tell me where I can make the hide fields of sales order appear in the sales order screen.
or screen layout.
Thanks & Regards
sandeep D.

How to add three fields in Sales order item level and supress/hide many

Hi Gurus,
My client requirement is :
1. Three fields to be added at Sales order Item level and they should flow till billing.
2. Supress/hide most of the fields in Sales order, so that end user will be happy( thru SHDO how to do)
Please share your experiences and help me.
BEST REGARDS
Srikanth

Hi Subba Rao
in VA01 screen - Material /qty/ after entering this client wants to enter three more details say X/Y/Z
and after that he dont want to see maximum fields displayed in VA01 Screen.
I think it makes sense.
Regards
Srikanth

Need to copy a custom field from sales order to billing document

Hi All,
I have a requirement, I need to add a new field in the sales order header part and even a field in the billing document, once i add this field up in both the documents in the header part i need to create a copy routine using the VOFM tran, can any body help me on what's the procedure to add a field in billing document and does the copy routine transfer the data ( Custom Field ) from Sales Order to the Billing Document, if yes can somebody help me with the procedure on how to and code of it.
solved it myself ....
Regards.
Message was edited by: seshi
seshi

Hello,
Regarding item 1, is it in the region of the global links (ie logout, home, preferences, etc.)? If not, have you tried creating a link via personalizations to the region you wish to have the link displayed (item type = link, destination = fully qualified name of your .xml page/region?
Regarding item 2, you may have to create the custom subtab programatically using the controller for the region of the current subtab layout.
Regarding item 3, you can also add a submit button to the page button bar region via personalizations. You can then add any logic you want to the button in the controller for the page.
Hope this helps.

Hide the cost and margin fields on Sales Orders and Invoices

Hi all,
I need to hide the cost and margin fields in Sales Orders and Invoices. We sell our products to our employees sometimes, hence we don't want them to know cost and margin information.
Can this be done?
Cheers

Go to VOV7 & as per the Item category ,de - select the Check Box Determine Cost.
Else remove the Condition Type VPRS & Margin Condition type from the Pricing Procedure
Best Regards,
Ankur

Populate Sales order document field

I would like to populate the sales order document field in FS10N drilldown , with the appropriate sales order number . does anyone have any idea how to get this accomplished.
Thank you

Hi clifton
If i understood your requirement correctly , you want the reference number the sales order number in FI .So for that , In VTFL maintain reference number as B (sales order) so you can check the sales order number as the reference number
Regards
Srinath

Reference field with sales order number in accounting document (FB03)

Hello!
Does anybody know if it is possible to display in FB03 in accounting document a refference field with sales order number?
Can parameter AUN be used for this purpose? If so, how can it be set up?
Thank you in advance for every help,
Sylwia.

You can config the rule of copy control for billing by tcode VTFL. for the reference number field you can choose B-sales order number. then when you invoice, the field reference number in the invoice header will be filled with the SO No. And this number will be displayed in FB03.
hope it will be helpful to you.

Problems when hidding tags at sales order.

Dear Gurus,
For a sales order "A" i need to hide following tags at header level:
*Sales
*Shipping
*Billing document
*Accounting
*Conditions
*Account Assigment
*Partners
*Order data
*Status
*Additional data A
We create a variant and assign it to sales order type at VOV8.
But while creating sales order with sales order type = A, the system shows following tags:
*Sales
*Conditions
*Order data
This tags were hidden in the variant assing to sales order type A.
Also does not show Additional data B tab, this was not hidden.
Please can somebody explain to me what is wrong with SHD0??
Thanks in advance!
Best regards,
Juan.

Hi Nitin,
In MTO scenario you need to create Sale Order and then run MRP in Tcode : MD50 by providing the selection fields like Sale Order No and Sale Order Item no. These fields are sufficeint system will take the materials number and Plant details from the sale order itself and through the procurement proposals.
You can run the mrp by providing the Sale Order No and Item No and execute and check it will work.
Hope this will help.
regards
radhak mk

Sale order document flow-u0091Service Documentsu0092 is coming which should't aper

New Issue with Sales order document flow:
When linking from a sales order in document flow, we were reviewing why the description information varied. In looking at different values, we clicked on a new item within document flow that allows you to like to Service Documents. This is new in 6.0, or it was previously deactivated in 4.6C. If you link from a sales order to a service document, in ECC 6.0, you will get a short dump because the document flow is so great (viewing order #any in VA03 and use document flow and then select the service documents button as seen on the screen below
A Short dump will occur in program SAPLDOCUMENT_FLOW_ALV.
Here in ECC 6.0 is how it looks from sales order 9806:
Documents created from 2004 through 2007 are coming up as linked to this sales order and that is incorrect. There is some type of linkage issue. In the 4.6 C environments, the service documents link is not visible from document flow.
Can any body functional / technical Help on this urgent???

Hi Sanjay,
Go to the order VA03 --> Environment --> status overview. The exact status of the header and item can be found here. You may have chances to know why the status is being processed.
Also
Check whether you have checked 'document flow update' field at item level in copy control
Check your settings for completion rule in item category
If it is due to incorrect status message, run report SDVBUK00. That might fix the error. It is recommended to run this first in test mode.
Br, Sats.

Create a new field in sales order

HI folks i want to create a new field in sales order item level how can i create

Hi,
Hope this will help you,
User exits in the screens
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
For field transports, you do not have to make changes or adjustments.
Example
A new field, VBAK-ZZKUN, should be included in table VBAK.
If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.

Cost centre field in sales order account assignment screen

Hello all,
I am unable to find the settings for cost center field in sales order account assignment tab screen along with profit center and internal order. kindly let me know the path to select cost center.
Thanks in advance
Raju

The Cost Center Determination settings is in OVF3 - but there are some cases where the Cost Center must be exceptionally changed.
If the document category for order type in IMG VOV8 is defined to be "I" which belong to order type FD - Deliv.Free of Charge, then the field cost center is active for input during transaction VA01.
Alternatively, you can specify an order reason and assign a cost center to an order reason.
However the standard SAP works only at the header level though, so it would not work if cost center is needed on the line item.
The cost center are assign for such business transactions as :
- Free deliveries
- Returns
- Deliveries of advertising materials
You can also make cost center allocation dependent on the order reason, for example:
Order reason: Damage in transit
Order reason: Free sample
Both the IMG settings are done in transaction OVF3, either with/without the order reason.

Can we edit Gross Price field in Sales Order

Hi experts,
According Help document (help - under Sales A/R/Sales Order-Sales document content tab ) as follows, userwe should be able to edit gross price field in Sales order
Enter in this field the unit price including tax. SAP Business One calculates automatically the unit price before tax and the tax amount, based on the tax code in the row. After pressing the TAB key, the Unit Price field and the Tax/Unit field are updated accordingly.
The tax amount is calculated as follows:
*Gross Price / (1 + Tax %) * Tax % = Tax Amount*
But when I set up in form setting visible and active for Gross Price, though I AM NOT ABLE TO EDIT GROSS PRICE FIELD
Is it bug in SAP ? I
BR
Samir Gandhi

Hi Samir Gandhi,
You may check SAP Note Number: 1060666 to see if it applies to you.
Thanks,
Gordon

How to make a field in sales order a required field

Hi,
How do i make a certain field in sales order a required field. I want to make the assignment field in accounting tab a required field. How do i configure this.
Thank you.
Rachelle

In you know the Transaction and screen Variant Configurations.
Use T-code SHD0
Put your Sales Order t-code There : Va01
Then Select the feilds or tabs whatever you want as mandatory , optional.
Customize as per your requirement and save the variant.
Next GO to the Sales Document types :
There In the Transaction flow you will find at variant feild.
Assign this variant there.
Next when ever you do sales Order for that Document type the feilds will be taken in the fashion of the variant.
regards,
SAP SD

Creating a sales order document

Hi,
When I create a sales order document in one company I want to automatically create a purchase order document (in the same company), and when this one is created I want to create a sales order document (in another company) with the same data as the purchase order. The purchase order is created via DIAPI and it works fine, but the problem is when creating the sales order in the second company. When I add the itemcode to the line , it doesn't write automatically any data of that itemcode, the vatgroup neither. So I have to introduce this field. The thing is that althought introducing the vatgroup manually, it doesn't calculate the vatsum, so in the doctotal isn't added. I've tried writing it manually but the problem is that the vatsum field is readonly.
Why can this be? How can I solve it?
The code is the next (in vb.net):
Dim oPedidoCompra As Documents
Dim oPedidoCompraLineas As Document_Lines
oPedidoCompra = oCompany.GetBusinessObject(BoObjectTypes.oPurchaseOrders)
If Not oPedidoCompra.GetByKey(DocEntry) Then
oApplication.MessageBox(oCompany.GetLastErrorDescription)
End If
oPedidoCompraLineas = oPedidoCompra.Lines
oPedidoVentaB = oCompanyB.GetBusinessObject(BoObjectTypes.oOrders)
oPedidoVentaLineasB = oPedidoVentaB.Lines
oPedidoVentaB.CardCode = ValorSql(s, oCompanyB)
oPedidoVentaB.DocDate = Date.Now.Day.ToString + "/" + Date.Now.Month.ToString + "/" + Date.Now.Year.ToString
oPedidoVentaB.DocDueDate = Date.Now.Day.ToString + "/" + Date.Now.Month.ToString + "/" + Date.Now.Year.ToString
oPedidoVentaB.DocType = BoDocumentTypes.dDocument_Items
oPedidoVentaB.UserFields.Fields.Item("U_NR").Value = oPedidoCompra.DocNum
For i As Integer = 0 To oPedidoCompraLineas.Count - 1
oPedidoCompraLineas.SetCurrentLine(i)
oPedidoLineas.ItemCode = Codigoarticulo
oPedidoLineas.Quantity = Cantidad
oPedidoLineas.Price = Precio
s = "select WhsCode from OWHS where WhsName like '%" & oCompanyB.CompanyDB & "%'"
oPedidoVentaLineasB.WarehouseCode = ValorSql(s, oCompanyB)
oPedidoVentaLineasB.ItemDescription = oPedidoCompraLineas.ItemDescription
oPedidoVentaLineasB.Price = oPedidoCompraLineas.Price
oPedidoVentaLineasB.Currency = oPedidoCompraLineas.Currency
s = "select vatgourpsa from oitm where itemcode = '" & oPedidoVentaLineasB.ItemCode & "'"
oPedidoVentaLineasB.VatGroup = ValorSql(s, oCompanyB)
oPedidoVentaLineasB.LineTotal = oPedidoCompraLineas.LineTotal
s = "select rate from ovtg where code = (select VatGourpSa from OITM where ItemCode = '" & oPedidoVentaLineasB.ItemCode & "')"
oPedidoVentaLineasB.TaxPercentagePerRow = ValorSql(s, oCompanyB)
s = "select suppCatNum from oitm where itemcode = '" & oPedidoVentaLineasB.ItemCode & "'"
oPedidoVentaLineasB.VendorNum = ValorSql(s, oCompanyB)
oPedidoVentaLineasB.PriceAfterVAT = oPedidoCompraLineas.PriceAfterVAT
If i < oPedidoCompraLineas.Count - 1 Then
oPedidoVentaLineasB.Add()
End If
Next
n = oPedidoVentaB.Add
If n <> 0 Then
oApplication.MessageBox(oCompanyB.GetLastErrorDescription)
End If
Thanks in advance,
vanesa

Hi Vanesa
When makin the sales order you must just select a vat group.It will then calculate it using the settings for that vat group. So, is the vatgroups set up in your other company?? Don't calcualte everyhting like line total. Just do itemcode, price,itemcode, vatgroup, warehouse and then the system will calculate the rest. Dont do PriceAfterVAT and all the extra's.
If you did it through the front end would you enter all that? No, you would just select item,qty,price and wh. The system calculates the rest for you.....same goes for di api. Do this to minimize errors.
Hope this helps

Hide fields at sales order document.

Similar Messages

Maybe you are looking for