Hide Fields for Applications WD ABAP Travel
Dear Experts.
I have the following doubt:
Is posible hide the fields enclosed in the box red using configuration of the following image for the application WD ABAP (Change Travel Request):
[Image|http://img513.imageshack.us/img513/1859/hidefields.png]
General Information About the Application and Component
Application: FITE_REQUEST
Web Dynpro Component: FITE_UI_SUMMARY
Window Information: AMOUNTS
View Information: AMOUNTSVIEW2
Configuration ID: F3C03EF7AE5E8F48A716EECAFD7E99BD
I tested using personalization (Ctrl + Right Clic), but this hide the label Total Travel Expenses, but not hide the values 0,00 USD and 560.000,00 COP.
I created a Implementing Enhancements in the View, delete the Element, but this not work and display message of error. I checked the following information of help:
http://help.sap.com/saphelp_nw70/helpdata/en/3a/f6ba42a950da11e10000000a155106/frameset.htm
And undo the element deleted
Someone have a suggestion for solve my issue?
Regards
Dear Expert.
The method CREATE_AMOUNT_UI have three methods:
me->add_currency_uielement(
iv_attributevisibility = l_attributevisibility
io_container = io_container
iv_currency = iv_currency
iv_design = l_design
iv_id = l_id
iv_indextoinsert = l_indextoinsert
iv_color = l_color
CLEAR l_id.
CONCATENATE l_idprefix 'amount' INTO l_id.
me->add_amount_uielement(
iv_id = l_id
io_container = io_container
iv_indextoinsert = l_indextoinsert
iv_attributevisibility = l_attributevisibility
* iv_amount = l_amount "MAHN1310083
iv_amount = lv_formatted_amount "MAHN1310083
iv_design = l_design
iv_color = l_color
CLEAR l_id.
CONCATENATE l_idprefix 'minus' INTO l_id.
wd_this->add_minus_uielement(
iv_id = l_id
io_container = io_container
iv_indextoinsert = l_indextoinsert
iv_attributevisibility = l_attributevisibility
iv_show = iv_minus
iv_design = l_design
iv_color = l_color
ENDMETHOD.
In runtime I did clear the value of the fields l_id and L_ATTRIBUTEVISIBILIT = VISIBILITY.TRIP_TOTAL.
But the system follow showing the field Total Travel Expense.
I want know what is the attribute that I should change for not display this label and value/?
Thank in advance
Regards
Carmen Guerrero
Similar Messages
-
Hide field for applications of ESS
Dear Experts.
We have several type of employees in the company. Employees A1 and A2. The company want that for the employees A1 the portal display all the fields for the service of Address, but for the employees A2 the portal hide two fields in the service of Address.
How can do this?
Regards
CarmenHi Bala.
I differentiate these employees by the filed Employee Group(P0001-PERSG).
When you says create two applications, Is do the that suggestion Stuart:
"Ctrl and Right Mouse Button (WD Personalization) , This is user level personalization "
Or When you say create two applications is modify the applications using WD Java ?
The applications are the following for Mexico(MX):
Personnal Information ===>
Address] Address
Bank Information] Bank Information
Document: Personal Data] Personal Data
Best Regards.
Carmen -
Hide Button in Applications WD ABAP Travel Standard
Dear Experts.
Please Someone can help me with suggestions for the following issue that I have in this moment:
I need hide the button "Entrada Nueva" "New Entry" for the component[ fitv_vc_advances|http://img842.imageshack.us/img842/2719/fitvvcadvances.png]
I found that this is posible using the t.code FITVFELD_WEB that controls the input fields within the portal.
But I am checking and I don't find this with this t.code for hide this button.
Thanks in advance,
Regards
Carmen GHi,
are you using ESS in portal?
you can hide button through iView
choose iView form Content Management, then preview.
press "Ctrl" button (@ button you want to hide) combine with right click of your mouse, then you can set the button invisible.
hope it helps -
Hide field for " Change Number". RMMG1-AENNR " in MMR
Hi,
In MM01 and MM02, i want to hide field for " Change Number".
I tried in OMSR and OMS9, but i could not find field "RMMG1-AENNR".
Hw to make it hidden.
Uts
Edited by: Utsav.agra on Jun 1, 2009 9:17 AMCheck is your problem can be solved by Screen or transaction configuration?
T Code is SHD0 -
Hide fields for IT0006 is not working correctly
Hello all,
I am trying to hide following fields in IT0006 for poland.
P0006-TELNR
P0006-ENTKM
P0006-WKWNG
P0006-BUSRT
P0006-ENTK2
P0006-HSNMR
P0006-POSTA
I have set up feature p0006 properly iand selected right buttons in T588M.
There is no alternative screen (2046) available for poland. User parameters are also correct for MOLGA and UGR.
However, when i go to PA20 or PA30, the above fields still appear on the infotype screen.
When i do same settings for another country, the screen is hiding these fields ( for example China).
Can you please guide ?
Thanks in advance
JG
Edited by: joy gomez on Apr 26, 2010 7:04 PMHello Joy, Please check the module pool you are using is correct one and the return value of the feature P0006 is maintained in the table t558m. I had the same issue with poland infotype. We afterwords took help of abaper - abaper hided it by screen painter - licence key is required for that.
Jaydeep
and p0006 not only saved but activated
Edited by: Jaysaphr on Apr 27, 2010 6:39 AM -
Reading T588M hide fields for MOLGA/feature/variable key & HIDE custom flds
Hi
I have requirement to read hide fields from T588M . As we can hide filed in T588m and we already have written a program in which it called certain feature from PE03 for IT0002 and hide the filed based on the user authorization . Now I have introduce another field which some how the same as in SAP standard screen , for some good reason and according to business process it was not full filling the requirements . So I introduce another field. Now what we want in PBO of IT enhancement it stop certain users to see that fields using feature ( Tr.Pe03 Feature p0002 ) . In feature we have programmed that it call our customized program and check the authorization as mention earlier .
Herere my questions
- Do you guys have any other good option to control that?
- If some how I manage to read feature using FM HR_FEATURE_BACKFIELD in PBO
- After reading feature I am accessing the table T588m to make sure for certain feature which field is hide or not as in table T588m I can see the fields like +-, , how can I make sure which field is refer to what I also find the FMS
- HRPAD00SCREENCONTROL
- HR_READ_T588M_WITH_PME04
- HR_T588M_CUSTOMIZING
- HR_T588M_GET_DYNPRO
- HR_T588M_GET_FIELDATTRIBUTES
- HR_T588M_SAVE
- But the above Fm also not fulfilling my requirement. As I was thinking that I read the fields , SAY if standard field is hide in the feature , I can loop at my screen and hide the custom field which I enhanced in IT0002.
Right now Im debugging the standard code how its reads the T558M , and I got some clue .. But it looks like long path I mean reading some screen fields.. Include program is L0PXVF01 .
Now my question is do you guys have any good solution, it might possible Im doing it using the short path .. ( Cuz I wna use my security program as its using feature )
Let me know if u have some idea
Thanks
Saquib Khan1- Well Im thinking that I have to compare T558M on the base of Feature and variable key . And see that standard field is hidden... if it is .. I want to also HIDE my custom field ....
2- For our feature "p0002" , we have developed a custom code in which on the basis of variable key and user profile it get executed and also see wther that person has authorization to see that standard field or not . if say that person doesnt have authorization for that field I can also hide mine custom field.
I just got the test login and Im going to test it by add/removing security roles .
<b>
I tried that out but if Im looping at screen , its behaving same for both users . Cuz there is nothing which tells ok for this user fild is hidden in T558m and its open for other one..
Also, is there any FM if I pass Dynpro # , molga and variable key , it return me T588M hidden fields ...
I already tried the above FM
This looks like to work but not working for field
HR_T588M_GET_FIELDATTRIBUTES</b>
Thanks for valuable input!!
Saquib -
Hide fields for activities when they are opened via Activity Monitor
Hi,
In CRM 5.0, my requirement was to hide a number of fields from activity display via transaction CRMD_ORDER & CIC0 (SAPGUI based transactions). I achieved it by using screen variant. I assigned my screen variant to different transactions (CRMD_ORDER, CIC0 etc.), and things were working fine.
But when I open activity monitoring report (transaction S_AE2_89000019), search for some activities and open an activity by double-clicking in the report, the hidden fields become visible. Although, the transaction being displayed in CRMD_ORDER.
I couldn't enable my transaction variant for transaction S_AE2_89000019, obviously because this is a report transaction which in turn opens activity when we double-click on the grid.
Any idea how to avoid these hidden fields being displayed via S_AE2_89000019?
Regards,
KaushalHey Kaushal,
Let me first inform you the following:
1) Transaction Variant are associatated to Dialog transactions only......Which means when u call report which eventually refers the same transaction even then the transaction variants is not called....
For the whole transaction variant to workout, you need CALL transaction " ..."....
2) The transaction S_AE2_89000019 is not a dialog transaction, its a parameter transaction which eventually calls a report AQZZ/SAPQUERY/SMCRM_REP_ACT1==
3)This report in turn uses the call to FM CRM_1O_CALL_FOREIGN which launches that crmd_order transaction screen and not crmd_order transaction..
You can enchance that report by creating a z report and inside that z report you can fulfill your requirement..
Inspire ppl by reqwarding..
Regards,
Anand... -
Hide Button in Applications WD ABAP Standard
Dear Experts.
Please can someone help me with suggestions for the following issue that I have in this moment:
I need hide the button "Entrada Nueva" for the component fitv_vc_advances
[fitv_vc_advances|http://img842.imageshack.us/img842/2719/fitvvcadvances.png]
I checked the following link.
Illegal External link removed by moderator
Thanks in advance,
Regards
Carmen G
Edited by: Thomas Jung on Dec 14, 2010 9:39 AMSumit Oberoi wrote:
Hi Carmen,
>
> I assume your requirement is to hide the button on some condition.
>
> Please check whether there is any attribute in the component which is boud to the visiblity of this button.
>
> If yes you can hide the button setting the value of that attribute to None ( WDUI_VISIBILITY = 01 ).
>
> If there is no such attribute then i can suggest below option:
>
> Create a context node and attribute ATTR of type WDUI_VISIBILITY and bind the visible property of this button to this attribute.
> Create a post-exit method for the WDDOINIT ( or any method suitable to the flow of this component) and set the value of ATTR to 01 on whichever condition you want.
>
>
> If you can not get the access key to do above change the second option is to create a Z of above component and replace the standard but I do not support this option as it can impact at many places.
>
> Please revert in case of issues.
>
> Regards,
> Sumit
Hi Sumit,
I dont think property of button in standard component can bind, even in enhancement mode, as its greyed out. I have tried without success. If you have done it with standard button, pls put out the steps. Also, deleting and creating the button with same ID does not work as it says the ID already exists. -
ESS-Hide field for a specific Subtype
Hello,
I am on EP7.0 ERP05 NW04s and trying to modify the Bank Informations page for ESS. What I want is to display Dollar Amount field on the Banks Overview page for Other Banks...but when I try to add that field in the Bizcards overview page ,it shows up for both Main Bank and Other Banks ,...
therefore I want that this field should be hidden for Main Banks and displayed only for Other Banks..
Any help would be highly appreciated.Hi everyone, Issue resolved
BADI: CUSTOMER_ADD_DATA
Method: CHECK_ALL_DATA
While saving, this method will be hit. We need to check for KNA1-KTOKD = ‘XXXX’, if yes, then check if KNA1-KATR3 is blank.
If it is blank, then display the error message ‘Attribute 3 has to be maintained for XXXX in Additional Data’ -
Adding customized fields for Travel Expenses
Hi,
I would like to add some customized fields for user input during the creation of travel expense form. Is this possible? If yes, any advise on the steps to create customized fields for data entry of travel expense form?
Thanks.Hi Yvonne ,
Thank you for the tip , it was helpfull.
We are using field BUS_REASON "Business Partners", We changed label for data element but is not showed in TRIP transaction we can see it in PR05 transaction.
How can I change labels for TRIP transacction?
We did the change in CMOD transaction
Thanks. -
RPM Upload/Download Project Data u2013 No Selection list for Application system
When trying to upload from project or download to project from/to application SAP Project System there is no selection list under the drop down field for Application system. As I understand from the RPM guides, this is the logical system. We have defined the logical systems in IMG. Is there some other configuration we are missing?
We are using SAP RPM 4.5 (CPR Xrpm 450_700: Support package 0009)
Any help appreciatedHi,
Have you deleted cache and tried it again.
Pramod -
Add custom fields in application FITE_REQUEST (Travel Request)
Hi Experts,
I have to add some custom fields in application FITE_REQUEST (Travel Request) of controller FITV_FPM_START, I don't know from where to start with.
Please help.
Regards
Upendra AgrawalHi ,
Actually we are also trying to add two custom fields for travel request but we hasn't find the relevant user exits or badi to do the same .But once i saw your thread its given some hope to get resolve. Can you please share the way to add the custom fields to travel requst screen .We trying this since one month .
Thanks & Regards,
arjun. -
How to hide fields in Infotype 16 for Molga 28
Hi Guys,
I need to hide some fields for IT0016 for Molga 28. Earlier we have assigned different screen for this molga .But now we have assigned the standard screen to IT0016 i.e. View-3211. But when i go to node Change Screen Modifications, i m unable to find MP321100. I have checked through PA30 for chinese employee the Program is MP321100 and screen is 2000.
COuld you guide how to hide some of the fields for Chinese Molga 28 in IT0016.
Regards,
NavneetHi Harish,
I havent got the chance to check with BASIS yet....they are lil busy .....meanwhile i have created an entry in t588m with Module pool mp321100 and feature p0016. As u told i have created entry with Molga 28 and return key 28 in P0016 feature.
Could you confirm that i need to Create mP321100 or i could have done it via mp001600 as told by other guy.
And now if i go the fields are hidden except for two fields which strangely are coming "ER Notice Period" and
"EE Notice Period". I have hidden all fields still these two fields are cming any idea why?
Regards,
Navneet -
Utilizing auto-increment/identity fields for primary key with "application" identity
Is it possible to utilise an auto-increment (identity in MS SQL Server)
field for the primary key field when using "application" identity?To the best of my knowledge, you cannot use auto-increment. Due to the
differences in the way that identities are generated at the datastore
(upon insert) vs. JDO (upon makePersistent), this feature of SQLServer is
not supported yet.
However, we do provide a variety of other ways of generating identity
which may provide a closer fit to what you want, and
our users may have some experience in solving your problem.
On Tue, 28 Jan 2003 09:56:08 +0000, Sean Ryan wrote:
Is it possible to utilise an auto-increment (identity in MS SQL Server)
field for the primary key field when using "application" identity?--
Stephen Kim
[email protected]
SolarMetric, Inc.
http://www.solarmetric.com -
SQL query to list the "Administrative category" field for all applications
yesterday i started a thread to list the "Optional reference" field for all cm applications in a SSRS report. I've got the query with the help of Torsten.
https://social.technet.microsoft.com/Forums/en-US/00419e6e-e3c2-4b80-b6af-2a24ced1032d/sql-query-to-list-the-optional-reference-field-of-all-packages-in-cm-2012?forum=configmanagersdk
But again today, i'm looking for a way to get "Administrative category" field in a SSRS report. Could someone point me to the right direction ?
Kindly mark as answer/Vote as helpful if a reply from anybody helped you in this forum. DelphinHi,
You could monitor the SMSProv.log when you check the category of an application. It shows that SQL query the SCCM provider used is related to function fn_ListCategoryInstances.
Best Regards,
Joyce
Maybe you are looking for
-
Video quality bad when compresed from final cut pro to dvd studio pro. HELP
Hello, I have a dvd project im working on and first i tried the video that i captured from final cut to just use in dvd studio pro but that didnt work. then i used the compressor and used the 60min high quality video and that looks even worse. what d
-
Help me about jdbc odbc connection
Can somebody help me ? I have no idea of this error . 3x the error code is : An unexpected exception has been detected in native code outside the VM. Unexpected Signal : EXCEPTION_ACCESS_VIOLATION (0xc0000005) occurred at PC=0x7C941010 Function=RtlEn
-
PLS-00201 when deploying mapping after 9204 upgrade
We applied the 9204 patch to our owb environment on friday. we are now unable to deploy anything. the error message we are getting is: PLS-00201-identifier 'WB_RT_MAPAUDIT' must be declared anyone have any suggestions?
-
Funds Management-Derive Fund centre from Cost Centre
Dear Guru In funds management -Derive Fund centre from Cost Centre" i used to have 8000 entries till yesterday. So there were 8000 combinations of fund center with cost center. Somehow I can only see 80 today. Somebody might have deleted those. Is th
-
Animation with looping objects?
Hi all. I have this animation in which I have 4 squares - red, green, blue and orange - in this order, in a sliding row. Check animation When I mouseover on any of them, the timeline slides one square to the left/right centering one of the squares -