Hide Group tree

When I run the report I could see the Group tree window as well as parameter window. By default it is selecting the Group tree window. Is there any option in crystal reports 2008 to make the parameter window as default instead of Group tree window ? Also, Is there any option to just hide the Group tree window ? I appreciate your help.
Thanks,
Sukumar Reddy

If you want the "Parameters" section to show up by default in the preview panel then you will have to make at least one parameter visible and editable in the "Viewer". The setting is the first setting on each parameter "Show on (Viewer) Panel" which is by default Do not Show when creating new parameters. The Group tree section will still be available though.
In Crystal 2008 you can hide the preview panel by unchecking the "Show Preview Panel" under File - Report Options. I don't know how to turn off individual sections in the preview panel.

Similar Messages

How to hide Group Tree in Crystal Report Server.

Hi all visitors
i have created one crystal report and my report use group to summary the amount of each day.
after i use group to summary, i used text box cover the group. so my group can't click anything.
After that i upload my report to crystal report server, when i viewed my report and when i click on Group Tree, it will show the list of group (group date in crystal report) and it also can click. I don't want to show the Group Tree in Crystal Report Server.
Anybody know how to hide group tree in crystal report server?
Best Regards,

Are you talking custom application, or infoview? If it is custom app, you would have to look at the setToolPanelViewType method. if its infoview, no direct way to change this that i know of.

CRVS2010 - Hide Group Tree and Parameter Panel

When I load a report into the CrystalReportsViewer:
crViewer.ViewerCore.ReportSource = document;
the viewer show by default the Group Tree and the Parameter Panel.
I don't want this, I want by default these panels not shown.
Is it possible?
I tried with:
crViewer.ViewerCore.ToggleGroupTree = false;
crViewer.ViewerCore.ToggleParameterPanel = false;
crViewer.ViewerCore.ToggleSidePanel = false;
but it doesn't work. And I don't want to use the ToggleSidePanelButton.
Thanks.
PaoloB

See [this|CRVS 2010 BETA - WPF Viewer - How to hide SidePanel?] forum thread.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Remove show/hide group tree at inforview for cystal report

Hi there!
I have 2 copies of Inforview install on 2 computers.
The first one, is my local comp. The display of cyrstal report at dynamic viewer is ok.
However on my second comp. The viewer will default to show the group tree stucture. I have tried to set the configuration at web.config. But it is still displaying the group tree structure.
Anyone could assist me?
Thanks and Regards,
Joni

I have tried disabling the option "Show Preview Panel" (according to a screenshot I found, this option replaced the old "Create Group Tree" option) in Report Options, and that effectively eliminates the content of the group tree, however, the group tree panel still comes up and shows empty until it is hidden using the toolbar.
This is really annoying and I can't find any solution for it on the web. Any ideas anyone?
Thanks,
Joerg.

Show/Hide group tree always present when deployed w/ weblogic to the web

http://diamond.businessobjects.com/node/749Please respond in either post if you know how to remedy this.-Sam 

Thanks for posting this in the other forum.Â It will be more likely responded to by theÂ correct members there.
Good luck.
Â Â Â Â - Kathryn Webster (Report Design Consultant)
Â Â Â Â Â Â Â Â Â Â Kat's News: http://diamond.businessobjects.com/blog/279

Hide the 'group tree' in crystal reports 2008

Hey Guys,
Please help me out.
I need to hide the group tree which automatically shoots on the crystal report after execution.
This is what i need to see. Only the report data (After report execution) i do not need to see the group tree under the tab 'main report' which appears on the left had side of the report.
I know that in the previous version there was an option which would hide the group tree option under File>Report Option> uncheck Group tree.
But there is no option here in CR 2008.
Is there a code i need to insert somewhere in the report??
Regards,
Harvino

Hi Chinmay,
Thanks for your quick reply, I was late on the reply because I had a load of other things to do. Sorry for that....
I am aware that we can click the toggle panel to remove the group tree.
But a user wants to hide the group tree on 1st run,,,, that is causing the problem.....
I cant seem to find an option we can disable group tree for the user, so that he may not view the group tree..
Harvin

CRVS2010 Beta - How do you hide the Group Tree for Visual Studio 2010

Would anyone know how to hide the group tree in the Crystal Reports viewer for Visual Studio 2010. I have tried
DisplayGroupTree="False" and found the property doesn't exist in the new version for VS 2010. I have search in the designer options and found nothing. Note this report is for ASP.net.
Thanks
Dave.
Subject modified as per the sticky post at the top of this forum; [Crystal Reports for Visual Studio 2010 Beta - read before posting|Crystal Reports for Visual Studio 2010 Beta - read before posting;
Edited by: Ludek Uher on Sep 15, 2010 8:55 AM

A simple search using the search box in the top right corner of this web page would have come up with the following KBase as one of the 1st - if not the 1st hit (for once, we beat Google ).
[1183704 - How to display or hide the Group Tree in CrystalReportViewer control through code in Crystal Reports 2008|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333133383333333733303334%7D.do]
- Ludek

Hide the group tree while previewing the report

Post Author: sanjay_usa1
CA Forum: General
Hello! Everyone i would like to hide the group tree which comes in the report while previewing it when i preview the report each time the group tree in the left hand side appears everytime i know i can hide and unhide it from the toolbar in the upperside but i dont want it to dispaly the group tree while previewing it as default , Is it possible to do that.
Pls Help out it will be a great help
Regards,Sanjay

Post Author: yangster
CA Forum: General
Under file -> optionsuncheck the display group tree that will remove the group tree from displaying by default

Group Tree - Magnifying Glass - opens new preview pane -

I have several reports that are similar, each with a group based on the same "refnum" field. On one report, I get a magnifying glass in the preview window, and when I click on a group, it opens a new preview window with just that group.
On the other reports, I don't see that magnifying glass to the left of the group name in the preview group tree, and when I click on the group, I just move to that page of the report. How do I get them all to behave the same way - how do I control that group tree behavior

You are seeing the magnifying glass because in the section expert, you've set Hide (Drill Down OK) for the section.

Eliminating Group Tree Level in VS2010

I need to have a variable number of levels in the group tree in VS2010, a technique I have used in CR for VS2005. I also saw this resolved for someone using VS2008 on thread 1493907 using the same method that I used in 2005. If, at the most detailed level, I group on a formula that I set to return a zero length string, that level still shows up in the tree and causes an error if the user tries to drill down that far.
The 3 grouping furmulas:
Group 1 formula
select {?level}
case 1 : {XXX.AGENCY_CD}
case 2 : {XXX.REGION_CD}
case 3 : {XXX.ORG_CD}
default: ""
Group 2 formula
select {?level}
case 1 : {XXX.REGION_CD}
case 2 : {XXX.ORG_CD}
default: ""
Group 3 formula
select {?level}
case 1 : {XXX.ORG_CD}
default: ""
Summary
If reporting from Level 1, then all levels of the tree are necessary. If reporting at level 4, I hide the group tree, since it is not necessary. If I want to report from level 3 (or 2), 2 (or 1) levels of grouping should be eliminated, but they are not.

Don
I set the grouping level to 3 (out of 1,2,3,4). If the level is 4, the tree makes no sense, so I hide it.
If I run the program from the IDE:
When I try to drill down in the GroupTree to the level that should not exist, Visual Studio breaks n allInOne.js with the error "Microsoft JScript runtime error: 'txtTooltipLyr' is null or not an object".
If I view it in the Main Report Preview in the IDE:
The 2 levels of nodes that should be eliminated are visible, but they do not do anything. The have no text and expanding the lowest level of the tree does nothing.
If I deploy the web page and run it without using the IDE:
The 2 levels of nodes that should be eliminated are visible, but they do not do anything. The have no text and expanding the lowest level of the tree does nothing, except that on the browser status bar there is an 'Error on page.' message.
I have never exported to RPT format. I just tried it and I had to open it with visual studio. It acts just like Main Report Preview described above.
DebugDiag does not show anything, I am guessing because the IDE is catching the error and nothing is really crashing.
Chip
Edited by: sandcrab72 on Feb 22, 2011 9:27 PM

CRVS2010 Beta - group tree in VS 2010 Crystal Report

Hi, I have installed VS 2010 Beta 2 Crystral Report and converted VS2005 report to VS2010 version.
I noticed there is a group tree button on the left side of report and I can't remove it.
question1) is there a way to remove Parameter Panel from the report when the report comes up?
question2) if I cannot remove Parameter Panel, is there a way to disable/remove the group tree butten?
thanks
Edited by: remowilson on Nov 2, 2010 3:36 PM
Subject modified as per the sticky post at the top of this forum; [Crystal Reports for Visual Studio 2010 Beta - read before posting|Crystal Reports for Visual Studio 2010 Beta - read before posting;
Edited by: Ludek Uher on Nov 2, 2010 8:08 AM

From CR 2008 Developer Help file:
The new parameter panel in Crystal Reports 2008 lets users set static and dynamic parameters and refresh the report. Users can also interactively format and filter report data. The parameter panel is available from the tool panel. You can access the parameter panel by clicking the Toggle Interactive Parameters button on the toolbar or programmatically by using the following code:
Visual Basic Copy Code
myCrystalReportViewer.ToolPanelView = ToolPanelViewType.ParameterPanel
C# Copy Code
crystalReportViewer.ToolPanelView = ToolPanelViewType.ParameterPanel;
You can hide the Toggle Interactive Parameters button programmatically by using the following code:
Visual Basic Copy Code
myCrystalReportViewer.ShowParameterPanelButton = False
C# Copy Code
crystalReportViewer.ShowParameterPanelButton = false;
The panel displays all parameters that have been set to Editable or Read only. If a parameter is set to Editable, you can add, delete or modify parameter values by clicking the Show the Advanced dialog box button. If the parameter values are modified but not applied, an asterisk will appear beside the parameter field to indicate that the values were not applied to the report.
Note
If the parameter accepts custom values, you can directly edit the parameter value in the text box on the parameter panel.
A database icon will appear adjacent to data parameters. When you modify the value of a data parameter, the report refreshes and accesses the database to make the corresponding changes. When you modify the value of a non-data parameter, the report is formatted or filtered based on saved data within the report. The report does not access the database.

Group Tree Basic

Hi
I am using group trees in my report and it works fine, but I am not able to hide the group tree pane.
is there a way to hide it so that based on the use it displays only their results in the server when u run the report?
Also is there a way to show group trees for some users and hide it for some?
-like a super level user see all groups and runs report choosing from the group.
- an end user does nto see the group tree pane and only see his results based on the group condition.
Thanks!!

Are you in crystal reports XI / XIr2 / 2008 ?
In 2008 you wont be having that option in the report option, for that
go into > registry > Goto > Run > Type regedit>
In HKEy_Current Users > Software > Business Objects> Suite 12.0 > Report View > Change the string value of "Creategrouptree" as NO then open the report and try to refresh.
Hope this helps!
Vinay

Removal of Group Tree selection results in Highlighting

Hello all,
I'm using CR for VS2010 SP1
I was just wondering how I can remove the highlighting when I select a Group Tree item.
For example, when I select an item in the Group Tree, the report returns with the selected item "highlighted".
Is there a way to remove the highlight?
Thanks for any help with this.
JohnMc
Edited by: JohnMc3 on Jun 1, 2011 3:49 PM

Hi John,
Sorry I got ahead of myself. What I was suggesting is if you click anywhere else in the viewer the highlight is removed. I was looking/thinking if an event could be triggered to set focus somewhere else the highlight would be removed.
Other than that I don't see any other way. Odd your users don't want to see what they clicked on... What ever you are used to I guess....
No option directly. If you want add your request to Idea Place and the PM's will look into it.
Just thought of something else, Hide the Group Tree and create your own, then you have full control over what it looks like. Lots of work for a minor appearance preference though...
Thanks
Don
Edited by: Don Williams on Jun 2, 2011 6:42 AM

VS2010 Eliminate Group Tree Level

I need to have a variable number of levels in the group tree in VS2010, a technique I have used in CR for VS2005. I also saw this resolved for someone using VS2008 on thread 8244145 using the same method that I used in 2005. If, at the most detailed level, I group on a formula that I have return a zero length string, that level still shows up in the tree and crashes the program if the user tries to drill down that far.
Group 1 formula
select {?level}
    case 1 : {XXX.AGENCY_CD}
    case 2 : {XXX.REGION_CD}
    case 3 : {XXX.ORG_CD}
default: ""
Group 2 formula
select {?level}
    case 1 : {XXX.REGION_CD}
    case 2 : {XXX.ORG_CD}
default: ""
Group 3 formula
select {?level}
    case 1 : {XXX.ORG_CD}
    default: ""
Edited by: sandcrab72 on Jan 31, 2011 6:35 PM

Don
I set the grouping level to 3 (out of 1,2,3,4). If the level is 4, the tree makes no sense, so I hide it.
If I run the program from the IDE:
When I try to drill down in the GroupTree to the level that should not exist, Visual Studio breaks n allInOne.js with the error "Microsoft JScript runtime error: 'txtTooltipLyr' is null or not an object".
If I view it in the Main Report Preview in the IDE:
The 2 levels of nodes that should be eliminated are visible, but they do not do anything. The have no text and expanding the lowest level of the tree does nothing.
If I deploy the web page and run it without using the IDE:
The 2 levels of nodes that should be eliminated are visible, but they do not do anything. The have no text and expanding the lowest level of the tree does nothing, except that on the browser status bar there is an 'Error on page.' message.
I have never exported to RPT format. I just tried it and I had to open it with visual studio. It acts just like Main Report Preview described above.
DebugDiag does not show anything, I am guessing because the IDE is catching the error and nothing is really crashing.
Chip
Edited by: sandcrab72 on Feb 22, 2011 9:27 PM

Main Reports' Group Tree doesn't retain last record selected

In Crystal 2008 Viewer, when you click one of the last tree nodes on a long Group Tree, the program jumps to that part of the report for that group. But when you return to the Main report tab the Group Tree pane returns to the top.
According to my users, previous Crystal versions used to outline the previously selected tree node and keep that section in the left pane, so the user could see where they just were.
This partially works in the Crystal 2008 Developer version. If I preview the report and drill down with the group tree, the Preview tab's group tree pane stays in place. I do not, however, have any outline or indication of what group was just selected.
I found this in the help text: "For longer reports or reports in which you wish to jump back and forth between different groups, the smart navigation features of the Group Tree make your work extremely efficient." For the users to jump back and forth efficiently they need the Main Reports' group tree to remember the general location from which they came (at a minimum) AND/OR the previously drilled record also be highlighted/outlined (at best).

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551

Hide Group tree

Similar Messages

Maybe you are looking for