Hide Layer when editing

Hi! I have an ASP- document that's using "include file" to
fetch an outside div-layer, wich in turn use a css to define the
look (as placement, background-image etc).
In Dreamweaver Layoutmode the layers cover some of the page
beneath and I want to hide them from the layout-mode temporarily so
that all content is visible.
Since the layer is included from outside the layer-name does
not appear in the layer-window, so to set them as visible/hidden is
a lengthy procedure... and...
...naturally I can put the visibility to hidden on all the
layers, but then I´d have to change it back to visible again
before I save... to difficult.
There should be another way to do this... no?
Do you even understand what I'm getting at?
Help? Someone?
/K

Use a design-time stylesheet to hide it.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Karl Z" <[email protected]> wrote in
message
news:efgf2n$71m$[email protected]..
> Hi! I have an ASP- document that's using "include file"
to fetch an
> outside
> div-layer, wich in turn use a css to define the look (as
placement,
> background-image etc).
>
> In Dreamweaver Layoutmode the layers cover some of the
page beneath and I
> want
> to hide them from the layout-mode temporarily so that
all content is
> visible.
>
> Since the layer is included from outside the layer-name
does not appear in
> the
> layer-window, so to set them as visible/hidden is a
lengthy procedure...
> and...
>
> ...naturally I can put the visibility to hidden on all
the layers, but
> then
> I?d have to change it back to visible again before I
save... to difficult.
> There should be another way to do this... no?
>
> Do you even understand what I'm getting at?
> Help? Someone?
> /K
>
>

Similar Messages

Lightroom does not create a background layer when editing in Photoshop - on Mac.

Thought this was a Photoshop problem. When I select a portion of an image in Photoshop (which has come from Lightroom) and press Delete, it no longer brings up the Fill dialog; it just deletes the pixels.
After some discussion on the Photoshop forum, I see that now, when I tell Lightroom "Edit in Photoshop", it creates a file which does not have a Background layer, and this causes the Delete key to act differently. This was not the case several weeks ago, but has just started to happen. Is there any adjustment I can make to the "Edit In" settings to get a Background layer in Photoshop?
JK

You must have changed a setting in Photoshop because Lr has no influence on how Photoshop treats the background layer.
There is nothing you can do in Lr to change this behavior of Photoshop.
What happens in Photoshop is this: For some reason the image is opened with transparent background.Such an image does not have a background layer and the layer at the bottom does not have the constraints of a regular background layer.
I am not aware of any command or script in Photoshop that would automatically do this on opening a file.
Try this: Reset your Workspace (>Window >Workspace). If that doesn't help I'd suggest to ask on the Photoshop forum why your Photoshop opens an image with transparent background.
You could also try to re-install Photoshop, supposedly this would reset any hidden settings that are causing this.

When editing an image in Photoshop from Lightroom then saving it back to Lightroom, how do i get the image to go back and sit next to the original? Mine is going to the end of the folder. Thanks Karen

When editing an image in Photoshop from Lightroom then saving it back to Lightroom, how do i get the image to go back and sit next to the original image? Mine is going back to the end of the folder. Thanks Karen

Hi Karen
You may the sort set to Custom. Click the dropdown menu on the toolbar (to the right of the word sort) and change to capture time.
If you can’t see the toolbar above the filmstrip press the T key. Press T again to hide.

Can we capture the show/hide layer event in PS?

Hi All..!!!
I have a query to all Photoshop coders! Can we capture the click event of show/hide layers in Photoshop..? I needed to know in my code when the user has clicked the show/hide layer eye..!!
Pls answer soon..!!
Thanks!

http://forums.adobe.com/thread/858391?tstart=0

Show/hide layer bug PS 12.01.x64?

I know that you OPT-Cllick on the eyeball to show or hide multiple layers in PS on the Mac. I could hide all by OPT-clicking on one eyeball. But OPT-Clicking it again did not show all the hidden layers again. It did nothing. Even after several reboots.I had to manually turn on all the layers.
But then I CONTROL-Clicked on the eyeball to bring up the context menu, which said "Show/Hide all layers" and somehow that woke up the show/hide function when OPT-Clicking on an eyeball. So now everything works normally. The FNCT-Click (or right mouse button) on the eyeball has become a switch to turn on the OPT-Click behavior.
Anyone else notice this?
Thanks
Stan
MacBookPro6,2 Intel Core i7o OS 10.6.4

The second Option+Eyeball click is a not a "show hidden layers" command, it goes to the previous state of visible layers... so if you opt+eyeball+click to just see one layer, then for whatever reason make another layer visible, or hide that layer and make another visible, or if you manually hid all but one layer, then that second opt+eyeball+click will appear not to work (if your expectation is to have all the layers become visible)
Kind of a convoluted answer there! But try that out and see if that is what you are experiencing.
I think at one point, quite a few versions ago, the opt+eyeball+click was a "show this layer/show all hidden layers" command. But Adobe changed the behavior because the second opt+click would make every layer visible, including the layers you had intentionally hidden.

Bug report: [layer mask] editing colors

Sometimes it appears that the white/black color combination that is automatically selected in layer mask editing may override the selected color combination outside of layer mask editing.
Example:
1) Open Photoshop.
2) Select two colors: white/white.
3) Create two blank documents, each with an empty Layer 1.
4) In one document, add a layer mask to Layer 1. The colors should have been automatically switched to black/white as the layer mask is selected.
5) In this document, use the gradient tool to fill the layer mask with black/white.
6) Switch to the other document, and notice that the color selection is again white/white.
7) In this other document, use the gradient tool to fill Layer 1. Notice that the layer is filled with black/white instead of white/white as selected.
Tested on: PS CS6, Windows 7, 64-bit.

On further testing I think the issue may not be directly related to layer masks at all.
Basically the issue is that the Gradient tool colors don't update to the 'default foreground/background colors' in cases where it seems that they should.
One example of such a case (as illustrated in the original post) is when the Gradient tool keeps the black/white color combo used for a layer mask in a previous document after switching to the current document where a non-masked layer is targeted and the default fg/bg colors have correctly reverted to white/white.
Example:
layer mask targeted in doc1 - notice synchronised Gradient and default fg/bg colors
after switching to non-masked layer in doc2, Gradient is still black/white although default fg/bg colors have reverted appropriately to white/white
Bug or not, it's something I wanted to point out as it seems inconsistent.

Getting extra NULL row in presentation layer when we use CASE in RPD

Hi,
We have created some time utility members in RPD like Previous month, Previous quarter.
Steps:
We have created a init block for capturing Previous month, Previous quarter and added variables with some default values assigned.
Now, we have created a logical column under time dimension in BMM as Previous month, Previous quarter. We are deriving them using following way.CASE
WHEN
MONTH_COL_NAME=VALUEOF(REPOSITORY_VAR_NAME)
THEN
MONTH_COL_NAME
END
We want these dimension values to qualify with measures.
The problem we are facing is it is showing one extra blank row in presentation layer when we bring Previous month or Previous quarter. This is because CASE conditions behaviour. How to avoid null in CASE condition in RPD?
Thanks,
Anilesh

You need to handle the records which are not equals to REPOSITORY_VAR_NAME.
I guess those other rest of values .
Try this
CASE
WHEN
MONTH_COL_NAME=VALUEOF(REPOSITORY_VAR_NAME)
THEN
'Y'
ELSE 'N'
END
in criteria use Y as filter value
If helps pls mark
Edited by: Srini VEERAVALLI on Dec 20, 2012 7:49 AM

How to capture show layer and hide layer event in photoshop through a plugin???

How to capture show layer and hide layer event in photoshop through a plugin???for mac

Use the Listener plug-in found in the SDK to see how you can monitor the show/hide layer event. You can also use the Getter plug-in to show what information you can find out about the current state of Photoshop.

How to get clips to appear in good quality when editing?

I worked with PE over a decade ago when I had a PC. In 2008 I migrated to Apple -- specifcally desktop Intel duo-processor Mac, OS X Snow Lion 10.6.8. So regretably I was forced to leave PE behind and begin using Final Cut Express 4.0.1.   Recently I bought a new HD camera so I thought it was a good time to return to PE 11 since the program is now being made for Macs too. (I had missed the Organizer tremendously!) Before working with my new camera however, I could not resist importing some old standard definition clips into a timeline to play around with. Well they look horrible in the viewer -- all pixelated and poor quality! I selected the clips, pressed render and nothing happened. I am used to automatic rendering when editing in FCE so that what you see in the viewer is what you get, of course unless you run into compression issues later on. But I need to see what I'm editing and can't do that with this poor quality. So what is the problem?   The clips are all in .mp4 or .mov format. The .mp4 clips were shot with a Panasonic SDR-H85P in that format and the .mov clip was converted from DV footage on a tape recorded with a Canon ZR900.
Also, I am used to seeing and working on a minutia level -- sometimes frame by frame with a "blade" tool in FCE. I switched to expert view but still can't tell where 1 frame ends and another begins. Is there an easy way to do that?
Thanks!

Thank you for your helpful answer.   Regarding frame view, I found the options you indicated. However, I think my issue has more to do with "timeline view" if you will.   For example, in Final Cut, you could press "option +" several times to "lengthen" the timeline which in turn would "stretch" out each frame to an extent necessary to make really precise edits on a minutia scale. Then in order to "compress" it so you could see the entire timeline on the computer screen, pressing "option -" several times would bring it back down to that size which was handy for seeing exactly where all your other effects on other timelines were arranged. Does that make sense? Is there a way to do that in PE 11?    It's zooming in and out of the timeline essentially in order to see more of the detail while editing.
Regarding the poor quality of playback, I was able to correct the problem by setting the playback settings to "highest." That was a relief.   Also the clip properties did match the project properties, but if I had wanted to change project properties, I don't think I could have because so many of the options remained blanked out or unavailable -- all light in color not allowing me to access them. Don't know what the term for that is but you probably know what I mean. So does that mean that project properties are always automatically determined or must they be preset somehow? Any direction on that issue would be helpfui because I also work with infrared clips a lot from a Bushnell camcorder and often combine those with regular video clips. What is going to happen then?   Again, thanks so much for your help!

Illustrator CC 17.1.0 crashes when editing preferences, user interface. Running on MacBook Pro i7 OSX 10.9.5

Illustrator CC 17.1.0 running on MacBook Pro i7 OSX 10.9.5 - crashes when editing preferences, user interface. Also crashes when quitting application. Anybody any ideas?

While 2 GB is the absolute minimum to install Mavericks, if you want to do anything with the Mac you need more then that. Upgrade your RAM.
Until you upgrade the RAM seriously consider shutting down the Mac nightly. You should also seriously review the items in the User Login Items to see if there are any there that you really don't need to have startup with your login to reduce the amount of RAM you are using.

Photoshop CS2 crashes when editing photo on Mac OS 10.6.8

Photoshop CS2 crashes when editing photo on Mac OS 10.6.8.
What is the problem? I worked fine before.

Provide the exact crash info and explain, what you are actually trying to do when the crash occurs. What tool or feature do you use? What kind of image are you working on?
Working with your Operating System’s Tools
Mylenium

Is there a plug-in to see Action Safe or TV Safe when editing?

I've shot some HD widescreen footage which has the boom microphone creeping into frame but I can't tell when editing if its going to be seen in the final cut. Apart from hoping for the best, is there a plug-in to help this problem or another solution - apart from reshooting....?

alexanderb47 wrote:
.. is there a plug-in to help this problem or another solution - apart from reshooting....?
search the usual suspects ..
geethree.com
imovieplugins.com
stupendous-software.com
.. for a 'zoom' plug-in.. adding a slight zoom could 'push' the mic outside the frame.. but, zooming video means allways a (dramatic) loss in pic quality.. just test it ...

Now, in photoshop elements 9 when editing, colours displayed are not correct, seems gama number has changes ?

up to now I had no problem when editing photos with photoshop elements 9. Due to an unknown reason/event the colours displayed , now, are not correct : it looks like the gama adjustment has been changed and the photo rendition is uncorrect. If I display the same photos with other photo editing software ( DPP from Canon for example, or Xnview) , the colours are correct !!... Can you help me ?
Thanks a lot !
JJ Etienne

Thank you for trying to help me. In fact, I resolved my problem by changing the default ICC profile for my screen : I entered the parameters settings panel, screen definition and then advanced settings where I could choose another ICC profile.
Thank you anway !!
JJ

Photoshop Elements 12 Editor Crashes When Editing Raw

Hi --
Consistently when I'm editing RAW files (Canon T2) the Elements Editor 12 crashes. To repro:
1) I'll select 5-8 photos in the Organizer.
2) Right click and "Edit with PS Editor"
3) RAW importer/editor (not sure if that's the official name, but it's the screen when I can make minor edits and white balance)
4) Select all images and open.
5) Initially they'll all open in the full PSE Editor, but after editing a few the editor will hang and suddenly wierd things happen:
     a)     the "after" version of the photo is a grey and white checkerboard. If I go back to the "before" version, it looks fine
     b)     the close file "x" button in the top right is disabled (just get a beep), but if I go under "file" and "close" in the menu, the file will close.
     c)     I can't close the application itself.via the "X" button or "Exit". I need to logout or manually go into task manager and kill the process.
I have a fairly new PC with vanilla installation of Windows 8.1.
Any suggestions?

Update -- still having this problem but not it seems to happen when editing JPEG as well. I'm not sure how to repro it as it doesn't happen every time, but sometime between the 2nd and 10th photo that I try to edit the editor crashes right after I save or "save as". I hear a system bing and then the editor becomes non-responsive. I can "close' the file via the menu (not via the "x" button in the top right), but no other functionality works. Can't close the editor other than by shutting down or manually killing via Task Manager.
Incredibly frustrating. I'm thinking about uninstalling/reinstalling but am worried about losing all of the data in the catalog (~15k photos). I'm thinking about just writing the metadata to the files (most have it already) and manually copying the catalog files.
Anyone else have this problem and/or suggestions on how to address it?
Thanks much

HT4293 i am trying to use dual monitors when editing with FCPX. I have a macbook pro and an apple cinema display monitor. I have connected them and opened Fcpx but the option to use second monitor is not active! what do i do ? please help going bonkers!

i am trying to use dual monitors when editing with FCPX. I have a macbook pro and an apple cinema display monitor. I have connected them and opened Fcpx but the option to use second monitor is not active! what do i do ? please help going bonkers!

<http://support.apple.com/kb/HT5891>
You can use USB for the Apple trackpad.
<http://www.mobeetechnology.com/the-power-bar.html>

Hide Layer when editing

Similar Messages

Maybe you are looking for