Hide links for MSS Launchpad Reports
Hello,
I have a requirement to hide the sections of Reports (Launchpad iView) for a particular group of users.
E.g. Hide section Time Management, Education and Training.
Please assist,
Thanks,
Prasanna.
Yes, check in IMG- Integration with Other mySAP.com Components> Business Packages / Functional Packages > Manager Self-Service (mySAP ERP) > Reporting > Personal Object Worklist > Define Query Visibility at Role Level
Similar Messages
-
Error when executing function in MSS launchpad report ???
In MSS lanchpad report, we have the following problem:
Error in Manager Sef-Service
When calling the report, the following error occurred:
System: HRP
Error when executing function
Basically in MSS report, I select employees in the first iView which calls another ABAP query in back-end to display back-end t-code inside iView of portal through ITS service. What could be the reason for it? please advice.
Thanks,
AnthonyPlease try converting the standadrd-delivered scenario RPT0, then check
out the things.
Also problem may be that your function code names contain
the character '&'. This causes a problem when the selected function
code is passed to the ITS-WebGUI as a URL parameter. Please use only
standard characters (A..Z and _) when you define a function code.
Then it should work.
Please go through the following link also
http://help.sap.com/saphelp_erp2005vp/helpdata/en/3a/
3198408d953154e10000000a1550b0/frameset.htm
Please test in backend using Se38 > PWPC_RPT_START_REPORT_TEST
The Reporting Iview in the portal has the Report category type, by
the report category type is set to "RPT0". Therefore, when the
application is launched, the reporting category type is also sent as URL
parameter to the backend system. As of ECC 6.0 only the reporting
category type "RPT0" is supported. ensure this is set for your custom reports if you are using own scenarion
then set in the Iview property of reports as well
ie example
1)Change the Iview property "Scenario" of the Reporting iview from
"RPT0" to your own "ZRPT", than this set of reports will work. however,
the standard reports will not work.
pwpc_convert_mdt_to_lpa >>
The following list of reports have been converted. -
One download link for 2 diffferent reports on a Dashboard page Obiee 10g
Hi All,
I have a requirement where in I have 2 different report in 2 sections on a Dashboard page. Is it possible to have a single download link so that the user downlaods the 2 reports by clicking on a single button. At present we are having 2 download link and the user has to download twice for 2 different reports.
I have to implement this in OBIEE 10g.
Thanks,
KrishnaHi,
By implementing briefing book method you can achive it.
steps
1) Create briefing book and add your two reports into that briefing book
2) save it your briefing book and then add it your dashboard page
ref:
http://gerardnico.com/wiki/dat/obiee/briefing_book
http://tipsonobiee.blogspot.com/2010/07/working-with-oracle-bi-briefing-books.html
Thanks
Deva -
Using a variable db link for an interactive report
I have a requirement where users will select an instance (db link) from an apex LOV and the data in an interactive report will query based on the db link selected.
I can use a db link in an interactive report query but only if I provide the exact name of the link. If I do something link select * from foo@:P12_DBLINK it doesn't work.
It seems my only option is to use something like apex_collection.create_collection_from_query and then I can build my query with dynamic sql and use a variable for the dblink name. Then I just create an IRR based on my collection.
Does that sound like that correct approach and/or am I missing anything?
Any suggestions are most appreciated,
johnI guess I have it working ok. I am able to create a region of type 'PL/SQL Dynamic Content' and do something like this and it works. As I change the dblink select list the report refreshes with data from that instance. Pretty cool! I just can't believe it's this much work to do this. This is just one column of data and I have about 10 columns that I need to display:
declare
type array_t is varray(100) of number;
array array_t;
l_sql varchar2(4000);
begin
l_sql := 'SELECT credit_card_trxn_id FROM EXM_CREDIT_CARD_TRXNS@'||:P4_DBLINK;
execute immediate l_sql BULK COLLECT INTO array;
for i IN 1..array.count
LOOP
HTP.p (array(i));
HTP.br;
END LOOP;
end; -
Crystal report ( how to create a hyper link for the crystal report file)
hello all,
how to create a hyperlink for my report file....nd i want it open in excel format.Hello Uher,
sorry for the insufficient details,
actually we are calling some actuate reports from actuate server, and the URL looks like this
"https://iconsole.xxx.com/iconsole/viewer/viewreport.jsp?
outputFileType=XLSX&fromwhere=viewDocument&outputName=
/filelocation/ReportOutputs/Reportname.xlsx&serverurl
=http://xx.xxx.com:8010&volume=xxx&userid=xxx&password=xxx"
which would generate an excel output,
my question is, can we have some url in which we would specify the output format, as far my research i found URL reporting
some thing like this
"http://" + servername +
":8080/OpenDocument/opendoc/openDocument.jsp?outputfiletype=xlsx/
filelocation/userlogondetails
but my client needs an excel output, with out going through any web page or viewer controls and generating buttons.
Thank you -
Dynamic url link for Crystal Reports Enterprise?
Hi all,
We recently upgraded to SBOP 4.0 SP2 and are looking at migrating our existing Crystal Reports from Crystal Reports 2011 to Crystal Reports for Enterprise 4.0.
Up to this point we have been utilizing the BW Publisher and role menus in BW.
Our long term goal is to migrate users from the BW GUI to the BI LaunchPad but this will be a gradual process.
Until we make the final switch to the LaunchPad we need to maintain the links in the role menus. I found the Document Link option for Crystal Reports so I have a URL to point to the report that we can put in the role menu, but the system value is not dynamic. Is there a way to make this dynamic like we can do with web template URLs?
For example, when using a web template URL we can use the <bsp_server> parameter in the URL to determine the SAP system. Is there an equivalent that can be used in the Document Link for the Crystal Report to determine the respective SBOP system?
Thanks.
-BrianHi,
Below is link for the Crystal report for Eclipse 2.0:
[http://www.businessobjects.com/campaigns/forms/downloads/crystal/eclipse/datasave.asp|http://www.businessobjects.com/campaigns/forms/downloads/crystal/eclipse/datasave.asp]
you could always refer to the following thread as Bryan updated with new releases :
[Crystal Reports for Eclipse 2.0 Release Update 8 is Now Available!|Crystal Reports for Eclipse 2.0 Release Update 8 is Now Available!;
Hope this will help
Regards,
Rameez Shaikh -
Download link for Crystal Reports for Eclipse 2.0 Release Update 12
Hi,
In Release note we found that the Unexpected database connector error is resolved while using JDBC result set in setDataSource in CR4E in Release update 12. Please give me the link to download the Release update 12 jars.Hi,
Below is link for the Crystal report for Eclipse 2.0:
[http://www.businessobjects.com/campaigns/forms/downloads/crystal/eclipse/datasave.asp|http://www.businessobjects.com/campaigns/forms/downloads/crystal/eclipse/datasave.asp]
you could always refer to the following thread as Bryan updated with new releases :
[Crystal Reports for Eclipse 2.0 Release Update 8 is Now Available!|Crystal Reports for Eclipse 2.0 Release Update 8 is Now Available!;
Hope this will help
Regards,
Rameez Shaikh -
Hi All
In MSS Launchpad Reports, the Entry Date value is showing as 00.00.0000.
For example I have selected Service Anniversaries in Launchpad and selected All employees and then clicked on Report Result. In the output I am getting Entry value as 00.00.0000 and also Year as 00.
In fact the Entry date in all other Reports of Launchpad is also same as above.
Any help is highly appreciated
Regards,
DimpleAny Help.....
-
Remove link from widget favorite reports - on page home
Hello Experts
On Startpage (Home) in CRM. I defined some links for widget favorite reports.
Some users are not allowed to klick on ofe the links. so i wante to remove them (because i don't wante do define a new role for this on link)
How could i remove them? Can you give an example coding for the do_prepare_out?
Thanks for Help.
Regards, SvenHi Sven,
You can try the following:
Enhance the web ui component UICMP_WC_FAVORI . inside the component enhance the view UICMP_WC_FAVORI/FavoriteCRMLinks and inside your z IMPL class you can redefine the method GET_WCFAVORITE_LINKS. Inside this method you can put condition based on business role of current loggedin user and remove or add report links. Ypu may need to define the DO_INIT_CONTEXT() to call your version of GET_WCFAVORITE_LINKS()
To get the business role of current loggedin user you can use the following code:
Data: lv_current_profiel TYPE crmt_ui_profile.
* Get the current user's business role
CALL METHOD cl_crm_ui_profile=>if_crm_ui_profile~get_user_defined_profile
RECEIVING
rv_result = lv_current_profiel.
Hope this will help!
Regards,
Ajay -
How to hide edit link for some rows in report? (according to value of col)
Helo,
How to hide edit link for some rows in report? (according to value of column)
regards
siyavuşHi siyavuş
You can do this by taking the edit link off the report and putting it into your report SQL.
Use something like Select CASE WHEN (condition) THEN
'Put your edit link in here as an html Anchor like<a href="(target)">Edit</a>'
ELSE
tt.value
END edit_link
FROM test_table tthope it helps,
Gus..
You can reward this reply (and those of other helpers) by marking it as either Helpful or Correct.
This allows forum users to quickly find the correct answer.
;-) -
Adding reports to MSS launchpad
Hi,
I want to add some standard R/3 Reports (some Time Mgt reports like PT64, PT90, PT90_ATT, PT65 and Travel Mgt reports like S_AHR_61016405, S_AHR_61018613.) into Report launchpad.
Could anybody please let me know if it is possible and if yes, how to do it.
Thanks!Hi Swetha,
Refer this link [Report Configuration for MSS|http://help.sap.com/bp_hcmv1600/BBLibrary/Documentation/N06_BB_ConfigGuide_EN_US.doc] Under that 3.1.2.1 Set Up Report Launchpad in HCM system
With Regards,
Laksh. -
Reports available in the Business Package for MSS and ESS
Hi,
I have searched sdn.sap.com throughout looking for a comprehensive list of reports available in the business packages for both MSS and ESS, i got a little bit of joy and found some of the MSS reports but not all on sdn.sap.com, can anyone please advise where i would find such information on both these packages, just to re-iterate, i am looking for a list of reports these business packages offer? any help much appreciated.
Thanks
John
P.s any documents can be sent to [email protected]@John
(1) ESS- We built our own custom PORTAL role/workset in which one of the worksets we created is called "Tools and Forms". Under that workset, we placed various pages/iViews that either are simple URL iViews that link to external documents and such (like vacation request forms since they do not do online leave requests yet) as well as a couple ot t-code iViews that run reports in ECC for the employee. Nothing very mind blowing there. Just some content creation on the portal side.....oh, and some config on the backend to create a Homepage Framework Area Page and all for it (I liked that part!)
(2) Wow....talk about perfect timing...I just had to document the way MSS sees the MDT reports in it's "reporting" area yesterday! haha Here goes the quick explaination....in configuration for MDT, you have various "scenarios". These kinda determine which "groups" of reports will show in MDT. For MSS for the Reporting webdynpro/service, the scenario is RPT0 (in ECC 5.0, at least). Soooo if you look at the function CODES assigned to RPT0, you will see several for Training and one for Accounting (Cost Centers)...you can reference the function CODES listed back to the "pool"/library of function codes a bit up/previous in the same config area for MDT(I think it is called "Define Function Codes"). However, there is one more piece you will see listed under RPT0....it is a DIRECT call to function MODULE "HR_HIS_READ" (this was a bugger to find because I could not find the "Maternity" report listed in the function codes and had to figure out where the heck it was coming from! haha). Anyways....what the function MODULE actually does is call the HR Information System (HIS) passing it the RPT0/MSS scenario. This returns the particular reports for Employee Data and Time&Attendance. You can see this if you run the HR_HIS_READ function directly and enter RPT0 for the second input value (first and third are not needed or you can just enter "*". Sooooo that is how the "magic" happens. Hope that explained it. From there, you can simply config you own scenario/reports to add into MSS if you like.
Hope this helped! -
MSS Approval Report Links to Busines Workflow Task in UWL
Hello All,
I have a scenario below that I'm hoping you can help.
I copied the standard business workflow task "TS31000007: CATS Approval by Supervisor" to create our own task (general task) and link the 'CatManagerApprove' application and 'sap.com/msscatapproval' package to this task in the Workflow Visualization Configuration.
We then assigned this new task to the time data entry profile for the portal. Once, employee released the working time, the task is created and send to the Universal Worklist.
The manager can then access the UWL and open this approve time workflow task. This task is open to the MSS Approval Report (similar to what appear under the MSS > Tasks > Approve Time by Manager).
However, I have copied the Approve Time by Manager to our own and changed some of the order of the column and header text and assigned to the MSS role.
I would like to have this CATS approval task open to the same approval report view/layout as in the MSS Approval Report.
I've tried to change the layout (column order) through portal contents of the standard MSS Approval Report because I thought it was reading from there, but it's not.
Does anyone know how this can be done or where to point to the MSS Approval Report on the portal.
Any help would be appreciated!
TamHi Karri,
We were able to use the launch iview task to launch our specific iview but I cannot seem to get it to recognize the workitem. In other words, when I click on the task in the UWL, my approve working time iview appears but it does not have the data that is from the workflow task item. Attached is the XML code that I used:
<ItemType name="uwl.task.webflow.TS93000001.SAP_ECC_Financials" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchIView" executionMode="default">
<ItemTypeCriteria systemId="SAP_ECC_Financials" externalType="TS93000001" connector="WebFlowConnector"/>
<Actions>
<Action name="launchIView" groupAction="" handler="IViewLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
<Properties>
<Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
<Property name="page" value="pcd:portal_content/net.saccounty.SacCounty/net.saccounty.approve_ts_data"/>
<Property name="openInNewWindow" value="yes"/>
<Property name="display_order_priority" value="5"/>
<Property name="workitemId" value="${item.externalId}"/>
</Properties>
<Descriptions default=""/>
</Action>
</Actions>
</ItemType>
I thought the line <Property name="workitemId" value="${item.externalId}"/> would pick up the work item ID, but it is not working. Any suggestions?
TS93000001 is our task. approve_ts_data is our iview. It opens in a new window correctly and goes to the correct iview, just is not the actual task data.
Thank you,
Mark. -
Problems with reports run from the MSS Launchpad
Hi,
The problem I am facing is with the reports being run from the MSS Launchpad. When i click on it, I can see that certain buttons like "Selection Fields", "org Assignment" are disabled. But there in one more button "More" which is enabled and clicking on it gives all the disabled options as enabled. However when the report window is maximized, the button "More " vanishes and all the buttons become disabled.
I need to enable all the buttons now showing as disabled. Eagerly awaiting your reply.
regards,
PinkiHi,
Thanks for the reply. But can you please let me know how?
regards,
pinki -
Is it possible to display the document link for each record in Report ?
Hi,
Is it possible to display the document or Image link for each master record in the Report with the help of RSA1->Document->Master Data.
Usefull answers are really helpfull.
Advance Thanks for the userful answers.
Regards,
MRC.Hi JAYASHREE PARASMAL ,
Thanks for your valuable answers.
Now i got the document in my Report,while executing the report through query designer as per your suggestion done on Setting Tab option.
But i can't able to get the same thing,while i executing the Repory through WAD.
What setting i need follow in the WAD for getting the same thing.
Kindly give your suggestion to get the document in my Report,while i am executing through my WAD.
Once again thanks for your helpful answer and awaiting for your suggestion.
Regards,
MRC.
Maybe you are looking for
-
Problem moving rented movie from laptop to iPad
When I go to move a rented movie from my macbook pro to iPad nothing happens and there is no dialogue box. Purchased movies sync fine. This is a new macbook pro so perhaps the new OS is having a compatibility issue with the iPad? Any ideas?
-
Crystal Report Viewer ActivX Control into an SAP Form
Hi I need to show an Crystal Report Viewer in a SAP form This code show an blanck from. I know that only ATL activX are supported by SB1, but I dont have more information about the Crystal ActivX. Dim oFormTST As SAPbouiCOM.Form Dim oCreatP As SAPbo
-
How to call VB program from PL/SQL ?
hi, i use oracle8i and i would like to call program VB from Stored procedur or PL/SQL program. Is it possible and how? thanks
-
Problem: -startet nicht auf -bis zum blauen Bildschirm -sicherer Systemstart ladet nur bis in die Haelfte und dann dreht nur noch das Rad unter dem Apfel -Einzelbenutzerstart funktioniert, alles in Ordnung -hab keine DVD zur Hand. -von einem anderen
-
Storing music on Firewire drive and sharing it with Win2000 laptop too
I just got a new 24"iMac and managed to transfer most of my music over from my g4 with a backup of my library. Now, I also have a 160gb Firewire drive that is empty and would like to make a second library of music of just all my cd's around 350 or so