Hide my number

My Galaxy Samsung Note 4 does not have the option to hide my number.  I have watched tutorials and followed each step but there is no call settings and hide number option.

It should pop up as an Anonymous Caller when using the feature b

Similar Messages

  • Hide "my number" doesn't work

    I got a new 8900 replacement (under warranty) and I know this worked on my old phone but somehow it's not working on this new one.
    Inside the Call log, menu >> options>>general options>>
    Show "My Number " = NO
    But my number still shows up whenever i'm making a phone call.
    I tried turn off and on. Battery pull too.  Double checked after battery pull, and it is "NO"...
    Help?
    Thanks.

    the show my number option is whether you want to see your number on the call screen, when you dial a number it shows your number, that's all that does. I'm not 100% sure how to hide your number but it might be the "restrict my identity" option on the same menu

  • How to hide a number on cucm 8.5

    Hi guys,
    I'd like to know how to hide the number of the caller on cucm 8.5
    I'm not a pro, could someone explain to me step by step please
    Thank you for ur time
    Regards

    OK, if you want to change this for all calls simply adjust "Calling Line ID Presentation" to RESTRICTED on
    all Route Patterns pointing to PSTN. If you want to do this only for some users you will need to copy all the route patterns and assign them different partition reachable from that phone.
    If you want it to work on demend, i.e users dial *67 followed by the number to block caller ID, copy the existing route patterns and add *67 to the front and set this "Calling Line ID Presentation" to RESTRICTED.
    HTH, please rate all useful posts!
    Chris

  • Hide SSN Number in 0employee_attr

    Hi,
           I want to hide SSN Number in the extractor "0employee_attr". have tried RSO2 to eddit the data source, but I get the message which says " 0EMPLOYEE_ATTR is extracted using functional module HR_BIW_GET_MASTER_DATA" and it does not allow me to edit the data source. Any idea how I can address this issue...

    Go to RSA6 transaction and edit the datasoruce over there...
    You can hide the field there and save.
    RSO2 transaction is used only for generic datasources it cant be used for standard ones.
    Edited by: mansi dandavate on Aug 14, 2009 6:58 AM

  • How to hide page number in the table of content

    Hi,
    I'd like to know how to hide page number in the ToC. They show automatically, but at least for the headings of third ad fourth order I'd like to suppress/omit them.
    Thanks for any advice!

    You have in the Inpspector > Document tab > TOC > uncheck button for #'s

  • How can I hide the number of unread eMails on my mail-symbol in my dock?

    Hello,
    I don't want to be disturbed while I am working so I am trying to hide the number of unread mails in my dock-symbol. I remember, that - some years ago - I could switch my preferences to not show any mails in my dock, but with the new Lion, I can just select wether I want to show all the unread mails or just the unread mails listet in my inbox.
    Any suggestions, how I can hide the number of unread eMail in my dock?
    Thanks a lot in advance
    Eike

    If you go to Settings>Notification Centre>Mail each of your email accounts will appear here separately. You can then change if Badges are displaye on the Mail App - which will show you the number of emails - or not.
    Regards,
    Steve

  • Hide bank number field from all transaction code

    Hi ABAP Gurus,
    we have requirement to hide bank number from all sap transaction codes in display mode only.
    Is there any way we can do it through configuration .
    Thanks,
    Troy,

    On 13 Dec 2006 in macromedia.dreamweaver.appdev, AdonaiEchad
    wrote:
    > How do I do that? I can only change what is on the page
    not the
    > mysql tables on the mysql server.
    Set '3' as the default value for the MySQL field, and don't
    do anything
    with it on the insert
    Joe Makowiec
    http://makowiec.net/
    Email:
    http://makowiec.net/email.php

  • If you block a mobile number, can they hide their number and get thru to your phone showing 'no caller id', If you block a mobile number, can they hide their number and get thru to your phone showing 'no caller id'

    I have blocked a number, but can this person still get through to my phone if they hide their mobile number?

    Hi, I was having the same issue, I have many numbers blocked but when then choose to hide their number the Phone would ring.
    I have since found a solution.
    Settings
    Do Not Disturb
    Manual
    Allow Calls From - All Contacts
    With Do Not Disturb on all the time, only people in your contacts can contact you, and all the people you have in your Blocked lists still stay blocked.
    Just be careful when you have your phone on silent, this will stop all notifications coming through, including text alerts etc.
    But for me its either this or change my number which i really cant be bothered to do
    Hope this helps
    Cheers

  • How to hide phone number in SMS

    Hello,
    My phone number is hidden when I call, but shows up in SMS.
    Is there a way to block that too?
    Vancehn
    Solved!
    Go to Solution.

    Your welcome, in certain countries and some carriers, and or certain networks on older phones (not sure about the newer phones) there was some inovated ways to hide the # and there still might be someone somewhere who comes up with a way.
    I know there is a App for phones that lets you change your #, someone can see that # but if they call you back you can change that # again, there are also Apps to block certain #'s,  so a search on the Web might turn up something.
    I hope if you find something it will be for good intent, and if you do please come back and tell us.

  • What is the best way to show/hide n number of columns ?

    Hi,
    I have a dynamic report that I have show/hide columns working using the below code. But when there are 500 or more rows it takes about a minute or more just waiting to see the columns toggle.
    What is the best way to do this?
    // Existing Javascript
    [script language="JavaScript" type="text/javascript"]
    var maxcnt= mymonths.length;
    function hideMaxEarn(){
    for(var j=0;j[maxcnt;j++){
    hideColumn('MON'+mymonths[j],'MAXCOL'+mymonths[j]);
    hideColumn('MON'+mymonths[j],'EARNCOL'+mymonths[j]);
    hideColumn('MON13','MAXCOL13');
    hideColumn('MON13','EARNCOL13');
    function showMaxEarn(){
    for(var j=0;j[maxcnt;j++){
    showColumn('MON'+mymonths[j],'MAXCOL'+mymonths[j]);
    showColumn('MON'+mymonths[j],'EARNCOL'+mymonths[j]);
    showColumn('MON13','MAXCOL13');
    showColumn('MON13','EARNCOL13');
    function getCellIndex(pRow,pCell){ 
    for(var i=0, n=pRow.cells.length;i[n;i++){ 
        if(pRow.cells[i] == pCell) return i;
    function hideColumn(pMon,pCol){
    var l_Cell = $x(pCol);
    var l_Table = html_CascadeUpTill(l_Cell,'TABLE');
    var l_Rows = l_Table.rows;
    l_CellI = getCellIndex(l_Cell.parentNode,l_Cell);
    for (var i=0, n=l_Rows.length;i[n;i++){
        if(i != 0) {
           html_HideElement(l_Rows[i].cells[l_CellI]);
    } else {
    $x(pMon).colSpan = $x(pMon).colSpan - 1;
    function showColumn(pMon,pCol){
    var l_Cell = $x(pCol);
    var l_Table = html_CascadeUpTill(l_Cell,'TABLE');
    var l_Rows = l_Table.rows;
    l_CellI = getCellIndex(l_Cell.parentNode,l_Cell);
    for (var i=0, n=l_Rows.length;i[n;i++){
        if(i != 0) {
           html_ShowElement(l_Rows[i].cells[l_CellI]);
    } else {
    $x(pMon).colSpan = 3;
    return;
    [script]

    Hi Andy,
    Yes, I replaced the code calling the same things in a loop to one loop getting the Table reference once and I build an array of column numbers at the time the report is built so I don't have to get the column number each time....
    it is a couple of seconds faster in about a 30 second response time. It will have to do it for now, no more time unless you see something in this new code...
    Thank you! Bill
    // dynamically built code
    col_nbr_array = new Array();
    col_nbr_array[0] = "1";
    col_nbr_array[1] = "2";
    col_nbr_array[2] = "4";
    col_nbr_array[3] = "5";
    col_nbr_array[4] = "7";
    col_nbr_array[5] = "8";
    col_nbr_array[6] = "10";
    col_nbr_array[7] = "11";
    col_nbr_array[8] = "13";
    col_nbr_array[9] = "14";
    col_nbr_array[10] = "16";
    col_nbr_array[11] = "17";
    col_nbr_array[12] = "19";
    col_nbr_array[13] = "20";
    col_nbr_array[14] = "22";
    col_nbr_array[15] = "23";
    col_nbr_array[16] = "25";
    col_nbr_array[17] = "26";
    col_nbr_array[18] = "28";
    col_nbr_array[19] = "29";
    col_nbr_array[20] = "31";
    col_nbr_array[21] = "32";
    col_nbr_array[22] = "34";
    col_nbr_array[23] = "35";
    col_nbr_array[24] = "37";
    col_nbr_array[25] = "38";
    col_nbr_array[26] = "40";
    col_nbr_array[27] = "41";
    // Static code
    function show_hide_column(do_show) {
    // Set Style, Show/Hide
    var stl;
    var csp;
    if (do_show){
    stl = 'block'
    csp = 3;
    }else{
    stl = 'none';     
    csp = 1;     
    // get rows object
    var l_Rows = document.getElementById('DT_RANGE').rows;
    var totCellNbr1=parseFloat(col_nbr_array[maxcnt-1])+2;
    var totCellNbr2=totCellNbr1 +1;
    var n=l_Rows.length;
    for (var i=0; i[n;i++){
        if(i != 0) { // if not the main header which spans 3 cols when expanded
          // Go through and show/hide each cell
          for(var j=0;j[maxcnt;j++){
              l_Rows[i].cells[col_nbr_array[j]].style.display = stl;
    // Totals
    l_Rows.cells[totCellNbr1].style.display=stl;
    l_Rows[i].cells[totCellNbr2].style.display=stl;
    } else { // row 1 that has Month spelled out - colspan of 3, others has max,earned and score columns for each month.
    var maxhdr = maxcnt/2;
    for(var k=1;k[=maxhdr;k=k+1){
    //alert('Header['+k+']');
    l_Rows[i].cells[k].colSpan=csp;
    // Total column
    //alert('TotHeader['+(maxhdr+1)+']');
    l_Rows[i].cells[maxhdr+1].colSpan=csp;
    [script]

  • Hide serial number from LabVIEW startup screen.

    Is there any way to hide LabVIEW 2009 serial number from startup screen?
    Corporate version, but every visitor can see it. Bad.

    This goes along the same lines as this issue.
    I would recommend you submit an idea to not show the activation code on the startup and about screens. I agree it is sufficient to show these only in the license manager.
    I always struck me as odd to show the number on the startup screen. It is not needed there.
    In the meantime, you might want to startup LabVIEW before the visitors arrive or before you hook up the projector and start the presentation.  
    LabVIEW Champion . Do more with less code and in less time .

  • How to hide port number??

    Hi All,
    How can we hide the 10g OCS port number, so that people from outside my office network can't access the server. This is for security reason. Or any other solution for this.
    My installation is on single machine. Please help me.
    Thanks

    Hi!
    I can think of two possibilities:
    a) Protect your machine by a firewall
    b) Before using the Collaboration Suite, people need to log in; don't give them accounts
    The documentation describes in detail how to secure a OCS installation, although I believe that your environment will differ greatly with those described. Most of the examples focus on protection towards the internet.
    cu
    Andreas

  • Hide Port number in the URL

    I would like to hide the port number, and everything to the right of it, from the URL to my applications.
    For example:
    I would like to have this URL:
    http://myhostname:7777/pls/apex/f?......
    read something like this:
    http://myhostname/CMS
    I dont know if this is something trivial, or not,
    or even if I'm addressing this issue to proper forum.
    Does anyone have any suggestions for me please.
    Thanks- Gary

    I have a very similar question as well. I am very new to web applications and web development in general, but we have some here that will come up by simply typing in the IP of the host or the word associated with that host in our local DNS environment. You are then directed to whatever site is on port 80 of that host.
    I would like to do the same with my app I have built in App Express - have users type in a "keyword" and they are immediately directed to my application home page. If my application URL requires a specified port 8080, this doesnt happen by simply pointing to the host. Is it as simple as changing the port number for the application?

  • Hide phone number

    hello,
    I can't set my 8100 to hide my phone number for outcoming calls. When I read the manual, it says,
    1. In the phone, press the Menu key.2. Click Options.3. Click General Options.4. Set the Restrict My Identity field to Yes.5. Press the Menu key.6. Click Save. 
    I just can't find this menu in my phone. I just can't find the "general options" menu. Can somebody help me?
    Thx in advance,

    Start following the directions from the Call Log screen.

  • How to hide Personnel Number Column in FI txns.

    Hi all,
    As you know in FI there are many transactions, for example FB03 allows you to display a document and you can then click 'Select Layout' and change the layout to include the Personnel Number field.
    I do not want many of my end-users to be able to display this Personnel Number field because they would be able to see what others are earning.
    I can't see any authorisation check in the program code that checks for an auth-obj such as p_pernr.
    Can anyone tell me how to go about preventing users listing the Personnel Number field in the various FI transactions.
    Many thanks.
    Babak

    Do you have HR in the same system and client as your FI? Or is it external (perhaps even non-SAP?)?
    Some general comments:
    You can deactivate line item display on the accounts which these "FI postings" go to.
    Manual postings on "earnings" are not "normal"... At most, a different adjustment account might be a good idea.
    You can protect the account using the (optional!) protection mechanism of account groups, and authority to maintain account groups. This should work for FB03 as transaction context. Try searching for "F_BKPF_BES" (and BEK and BED) and F_SKA1_BUK (and KNA1 and LFA1) for more infos.
    Kind regards,
    Julius

Maybe you are looking for