Hide Save Draft Button in the first step

Hi All,
I have requirement to remove Save Draft in the first step of HCM P&F. But I can not find how to hide or remove save draft in the first step.
Please kindly guide.
Best Regards,
Visut

We had the same issue on my most recent project. From the INITIAL step....ie. start the process....you can not (at this time) hide/disable that feature/button. As said above, it CAN be done in steps after that simply by setting the workflow binding on the parameter. Not sure how/why SAP missed the need for this. I would think it would be a "checkbox" of sort in your "Process Start" configuration in the Design Time....but nope.
In our case, we wanted to allow it for manager initiated processes, but not for employee initiated ones. Therefore, we set up a "check" on the workflow task that creates the "draft" work item to "trash" the ones from ESS and properly handle the ones coming from MSS. It was....interesting. haha We also changed the default "save as draft" message that shows so the users would know what had happened (ie. not supported in ESS).
Hopefully this becomes a config setting in coming EhPs.

Similar Messages

I bought an iphone 4 from my friend and he do not know his apple ID and we are trying to know the email attached to is apple ID so we can rest it cause he forgot them as well and the reset button in the 2 steps always says that the email is always sent !

i bought an iphone 4 from my friend and he do not know his apple ID and we are trying to know the email attached to is apple ID so we can rest it cause he forgot them as well and the reset button in the 2 steps always says that the email is always sent ! ( even if you wrote a worng ID like ( asdasdasd ) it will say sent !! how come and now am trying to know or need a hint on that email so my freind could try to remember it !
to those who will think that this phone is stolen , no its not and i would love to go to apple store if there is 1 in jordan so they can help us ,
i have everything with this iphone the box the catalog its serial number , everything but the ID and the (and apple ID is everything as you know)
so please if anyone have any suggestion to help me , and even apple it self if the can help me to get a support from them cause i tried everything to contact them by mail or any other option since as i said there is no apple store in jordan

he knows his ID , if he did all whats in the link he can get his password back ?
how can i make him call applecare ? is there a way to speak to them from jordan ??
i have been trying to reach any1 in apple so they can communicate and help my friend (us) to make him remember it .
am not asking for the password or trying to get into the phone without using it , and i can take my money back though i need to help my friend as well since now he cant use it as well.
thanks kil

How can I disable the previous button in the first page and the next button in the last page?

Hi all,
I have created a new skin for a webhelp by modifying the layout and the buttons. However, I am not able to find a way where in we can
disable the previous button ini the first page of the webhelp and hte the next page in the last page of the webhelp. If both the next and previous button is visibile in the first and last page, it is sort of misguiding the user.
I am using Robohelp 9.
Please advice.
Thanks,
Parag

I think you are mixing Previous and Next in a browse sequence and the Previous and Next that you get in the browser itself.
In a browse sequence, they are automatically disabled at the start and finish. When in the first topic in the sequence only Next will be enabled, when in the last topic only previous will be enabled.
Previous and Next in the browser are working on the topics your user has viewed which is not the same thing.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

I'm trying to create my icloud account with my apple id but in the first step it tells me to check my e.mail and there is no message in my inbox. What is happening ?

I'm trying to create a icloud account but I can't go on from the first step. The sistem ask me to check my e.mail and when I go to my inbox there is nothing. And it keep saying that I dind't verify my e,mail. What is happening please.

No-one seems to know, or have any idea how to solve the problem!

IBooks Author. I am not allowed to sign in with my Apple ID on iTunes Connect when I am trying to publish my book in iBooks Author. I do not understand why because I have fulfilled the first steps creating an account and informed my IRS tax number...

I am not allowed to sign in with my Apple ID on iTunes Connect when I am trying to publish my book in iBooks Author. I do not understand why because I have fulfilled the first steps creating an account and informed my IRS tax number...

The recommendation is always to make another ID for use with a paid books account. And while I can't swear this is at the root of your issue, you should in any case reach out to Apple for assistance on this one, I think.
Account Applications:
[email protected]
Global Phone Support
We have expanded English-language publisher phone support. To make contacting the iBookstore support even easier, new local phone numbers are now available for Australia, France, Germany, Italy, Netherlands, Spain, and the U.K. Support is available Monday to Friday, from 7 a.m. to 5 p.m. (PT).
Country
Phone Number
Australia
1300 307 504
Note that this is a low tariff number.
France
0805 540 117
Germany
0800 664 5307
Italy
800 915 902
Netherlands
0800 0201 578
Spain
900 812 687
U.K.
0800 975 0615
U.S.
+1 (877) 206-2092
Toll-free from U.S. and Canada.
Good luck

What is the first step of an abaper after getting the FDS

what is the first step of an abaper after getting the Functional Document ?what we have to do? how to analyze it , and how to face such interview questions on FDS TDS . any resource available.

Hi,
After getting the FDS , first understand the functionality of the requirment or take the help of the functional consultant and then start preparing TS ( TEchnical Specification) and do coding and get your doe reveirewed and prepare test cases and do testign in sand box and quality environment and after having got the confrimation that the requirment is met then port it to production.
Regards,
Irfan
Note: Please award helpful answers.

Issue with TestStand 2010 or 2012 hanging on the first step after continuously running TestStand?

I am having issues with a CVI test sequence hanging in TestStand 2010 & 2012. Currently, the only way to resolve this is to exit/close TestStand. Following this we must replace the entire project with a backup project. This only occurs about once a day or so with the sequence running continuously. It will hang on the first or second step in the sequence, usually the first step. The project uses several continuous XINET CAN messaging, so I wonder if this could be related to that.

Yes, I have. It hangs at the first statement in the code after all the variable defines. It does seem to be related to any particular statement, as we had skipped that test step, and then it hangs on the next step at the first statement.

Can not get Itunes match to work. It stops on the first step and on my status bar it just says "sending information to apple" this goes on for hours. Help please.

Help please. I cannt get itunes match to work. It just stops on the first step and the status bar continues to say "sending information to apple" for hours. Any ideas?

I am having a similar issue with iTunes Match. It keeps hanging up on the same number of files (11035 of 15455) during STEP 2. I've tried signing out, re-opening iTunes, re-booting, etc. Still comesup stuck for hours. What I also don't understand is why the "iCloud Status" option in "View/View Options" disappears intermittently. It was there when I first booted up this morning and I reviewed all my music files to see if there were any "errors" and there werne't any. But after Match gets stuck on the same file niumber (11035) I 've signed out and re-booted and now the "iCloud Status" check box is missing from "View Options" (only the "iCloud Download" option remains present all the time. Please help. (I've also checked to make sure all the music files are within the suggested bit rate parameters and file type - This is also a brand new iMac out of the box). Running out of troubleshooting ideas and beginning to think this service just doesn't work well.

HT4623 There is no "Software Update" visible between "About" and "Usage" in General Settings, as shown in the example. And I can't find it anywhere else, either, so I am stymied at the first step of trying to update. Ideas?

I am stymied at the first step of trying to update my IPad software, as there is no "Software Update" choice visible in General Settings. And I can't find it anywhere else, either. Ideas?

Settings>General>Software Update is only available on iPad with IOS 5 and above.
If you are using IOS 4, you need to connect to iTune (computer) to update software.
http://support.apple.com/kb/HT4972

I am unable to get past the first step of Winston Churchill's answer because my phone says "checking for a software update failed because you are not connected to the Internet". Did my WiFi connection also get lost?

I am unable to get past the first step of Winston Churchill's answer because my phone says "checking for a software update failed because you are not connected to the Internet." Did my iphone's WiFi connection also get lost with the Contacts, Mail and Text Messages? When I tried the software update, as recommended by Winston Churchill, the iphone was connected to my desktop which is connected to the Internet.

You can't use your computers Internet connection to update your phone from the phone itself. If you want to use the computers Internet connection to update your phone you must update it through iTunes.

I cannot download the creative cloud i have havent got passed the first step

I cannot download the creative cloud i have havent got passed the first step

Maybe you are taking the wrong first step. What is the first step that you have not gotten passed yet?

Iphone 4 sync issue - My iTunes is not able to sync the iPhone 4. I'm using windows 7 32bit. At the first step it gets stuck refelcting backing up the phone then nothing happens for ages. I'm using the latest iTUnes version, does anyone have similar prob

My iTunes is not able to sync the iPhone 4. I'm using windows 7 32bit. At the first step it gets stuck refelcting backing up the phone then nothing happens for ages. I'm using the latest iTUnes version, does anyone have similar prob??? There are no error codes which appear and the iTUNES just gets hanged, is there a solution?

Remove the song in question from the sync list and see if the rectifies the problem.
If it does, then iTunes believes the song no longer exists on your drive and that will need to be corrected.

I'm a newbie to Blackberry - What is the first step to correctly using the instrument ?

I'm a newbie to Blackberry - What is the first step to correctly using the instrument ?
I just acquired my first blackberry phone model-9810. What are the different simple steps or the procedure that I should follow to correctly use this instrument, i.e., telephone features first, internet features later. Your assistance to a newbie is highly appreciated. All the best!
Solved!
Go to Solution.

Yes.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

I just purchased creative cloud. What is the first step I should be taking?

I just purchased creative cloud. What is the first step I should be taking?
I'm unable to download the applications and I'm not sure why. I thought it had something to do with me having the trial prior so I went ahead and deleted it. And I still cannot download the applications. Am I missing a specific step in all of this? I was under the assumption that when I purchased creative cloud, it would be some sort of prompt to install the program (the way adobe normally works) then I would be able to install the applications separately.

Hi Poe7,
Welcome to the Community & thanks for being the Creative cloud member!
The first thing is to download Creative cloud desktop app which will help you to download all the apps available, go to https://creative.adobe.com/products/creative-cloud and download it.
Once downloaded, launch it and select any product to start downloading/installing within the app.
Thanks!
Ankit

Add 2nd sharpening step which acts upon the results of the first step

Consider adding a 2nd sharpening step which acts upon the results of the first step. For artsy reasons, you might want normal sharpening, then enhance edges as a second step. For lower quality images, two sharpenings can be an effective form of noise reduction. For whatever reason I often run two sharpening steps in a row in CS5, where the second step would look bad without the first.

Scott T Martin wrote:
Lightroom already has 3 levels of sharpening: "capture" sharpening in the develop module (detail panel), "creative" sharpening with the localized adjustment brush and "print" sharpening in the print module.
Is there a problem with the current implementation that you think could be improved?
A good example is one I had yesterday: a raw camera file of a water action shot where it is desirable to have two sets of sharpen settings, --one finer radius (.8 to 1.2) for the normal sharpening of the shot, and then another step which is a coarse one (about 2.1 + separate detail/masking setting) to enhance water droplets. The second masking only applies to the second step, thereby preserving the desirable sharpened detail of the first step. This allows the water droplets to be targeted in a narrow bandwidth, and made spherical and sparkely, giving the photo depth. The same could apply to coarse animal hair, ice crystals, etc. The reason I want the sharpen steps in "capture" mode is so they can be copied separately and pasted to multiple photos.
The only way to do this now is to use CS5 to sharpen the water droplets after the normal sharpen which then severs the chain of Lightroom history. It's much harder to reverse a previous change once Photoshop is resorted to. And subsequent changes do not behave the same on a non-raw image.
What type of image content are you using that the current set of tools isn't satisfactory? (ie: are you talking about camera RAW files or film scans that were shot out of focus? More details would help.)
Actually both. Other uses I've had for a second sharpening step is to target, and enhance edges on lower quality scanned images. However I have less of a problem fixing these images in Photoshop because: they are usually one-of-a-kind, and they have no raw data to work with. I just make sure the scan is as accurate as possible and that becomes the starting point.
The brush sharpen is handy but not for the above purpose requiring a different radius. And of course copy/pasting brush strokes does not work on action photos.
I hope this helps to clarify my request

Hide Save Draft Button in the first step

Similar Messages

Maybe you are looking for