Hide Scatter Plot Grid

Hello.
How do you hide the grid in a scatter plot?
I think there must be a simple way of doing this
but I just can't find it.
Thanks,

Once you have it enabled for an account, and provided that you also have it for at least one scenario, you right click on a cell and select "Cell Line Item Detail". You fill in "Detail" and amount and once you save it sums up for you the amounts on the same cell.
Edited by: antsar on Jan 19, 2012 3:38 PM

Similar Messages

Trendline in Scatter plot

Hi,
I have a couple question on Power View 2010
1. I want to know if I can plot regression Trendlines(Linear/polynomial/power) on scatter plot?
2. Navigation between pages- Is it possible to navigate between report pages in Power View 2010 by passing parameters from the first page to the next page?
3. I have a report that has 3 pages. I want to create 2 pages in SSRS 2012 and one in Power View 2010. Is it possible to navigate between these applications and also pass parameters in the URL?
Thanks in advance.
Ankit

The reason why it hangs is because you have 2 event structures inside a loop. You should only have one event structure in a loop. This is documented in the LabVIEW Help. With 2 event structures one of them will block the other.
Your code is also about 3 times larger than it needs to be:
To create the array of names for the dropdowns you only need to autoindex a for-loop from the 2D array of data and use the Format Into String function. You don't actually need to use the values - you only need to autoindex the for-loop.
Using Delete From Array and Reshape Array just to pull out a row is simply silly (not to mention a Rube Goldberg). That's what Index Array is for.
In the Cursor Move event case you only need one function: Index Array. The point index is already available to you from the event case's data.
Half of the code really belongs outside of the while loop since none of that data ever changes, so what's the point of regenerating it each time?
Instead of using 2 Index Array functions just to get the list of names, wire a True to the Read From Spreadsheet File's transpose? input and use the first row output.
I've attached a simplified version of your VI.
Attachments:
PCoption2_MOD.vi ‏34 KB

Can we show / hide the minor grid in a graph programatically?

I know how to do it statically and I know how to show / hide the major grid programatically. I am using labview 6.0.
thanks

thierry_d,
This feature is not available in LabVIEW 6.0.x, but there is a minor grid color property in LabVIEW 6.1. If you really need this property, then I would suggest upgrading to LabVIEW 6.1.
Randy Hoskin
Applications Engineer
National Instruments
http://www.ni.com/ask

How do you make a horizontal average line in a scatter plot?

In any version of Numbers, is there a way to make a horizontal average trendline? Not a "moving average", but one line that is the average that goes through the data points on a scatter plot.

sflakg wrote:
hit a few roadblocks.
I tried:
1. using the crop tool to make the canvas bigger with a transparent background.
2. Used lasso tool over people in group shot (total of 5) and saved the selection
3. Tried content aware scale to raise the image, but it keeps stretching out the people.
Any thoughts on what else I could try?
Rather than trying to stretch it taller, try to squeeze it horizontally. There are methods for telling it what to protect in the image if it gets touchy.
Another possibility is to use Content Aware Fill to make up part at the top and bottom, without any stretching.
-Noel

Why won't my data appear on my scatter plot graph in numbers?

I'm making a scatter plot graph and I'm dealing with very small numbers on my x-axis, such as 0.0004 and 0.184 on my y-axis. Every time I plot the scatter plot graph, nothing appears on the graph. Can anyone please help me? Thanks.

just to check in your notification centre,(settings>Notification centre>Messages) did you enable show alerts from everyone? if so
Do a reset by holding the power and home button until the apple logo appears ignoring the slide to power off (no data loss).

How to select all (dots) in a scatter plot matrix?

I have a scatter plot matrix, and I'm manually changing the color of each trend line, which probably isn't the best way but it's an easy but time consuming way to do it. I can't feasibly change the color/stroke of every single scatter plot dot in every single scatter plot graph of the matrix. I'm trying various Select --> Same or Select --> All but it keeps trying to change everything, from the line to the border to the dots. I am not sure if I can group the dots and select all or something. Is there a way to select all of the dots and just the dots?

I feel like I should have posted screenshots of my graphs for all of my questions. In any event I've been manually changing the colors of the lines and the dots (see the few graphs on the left, I highlighted the inside of the graph and changed the dots and the line and then just manually changed the line back)

Highlighting a single data point in a scatter plot - Numbers'09

Is there a way to highlight a single data point on a scatter plot in Numbers'09 (or point to it using a line from each respective coordinate on the x & y axis).
I don't think it matters but the data point i am looking to highlight is the [highest y value/2]... and of course its respective x coordinate once you plug the y value into the equation ( y = f(x) ) and solve for x.

Here is my own tip :
As you see, I use two sets of values.
In the second one I define only the yValue of the data point which must be "highlighted".
Yvan KOENIG (VALLAURIS, France) jeudi 10 février 2011 20:49:32

Swap X and Y in a Scatter Plot

Seems like this should have a simple answer. I have a table of data, and I'd like to generate a scatter plot of two columns. The plot comes out fine, but I want to "swap" the X and Y axis in the resulting chart.
Is there a simple way to do this? I can't find anything in the chart popup-menu, the inspector, or the application menus.
Cheers
Mike

Michael,
This is a user to user forum, and I'll admit that I don't have a great grip on Numbers Charts, so I may be missing something myself. However, I don't know of an easy way to swap the axes either. What I would do is to create an auxiliary column that repeats the X data in a column just to the right of the Y data. Then I would create a new chart that plots the second and third columns, effectively reversing the axes. The third column can be hidden. Of course you could also just reverse your x and y columns before plotting, but that might be more disruptive to your overall table organization.
Jerry
Update:
I believe that, after some experimentation, I have a better method for you. Highlight the X Range only and create a Scatter Chart. The Chart will be blank since you have not yet supplied a Y range. Then highlight your Y range and drag it to the blank chart. A new Y series will be inserted.
Hope this works for you.
Jerry
Message was edited by: Jerrold Green1

How do I connect the scatter plot points in the newest numbers?

I just made a scatter plot for biology and I was wondering how I connect the points with lines

It sounds like all of your wireless clients (computers & printer) are having issues with the overall signal quality of your Wi-Fi network.
I suggest that you check out the following Apple Support article on the sources of Wi-Fi interference and try to identify & eliminate as many as possible to improve your wireless network.
You may also find the following Macworld article helpful on troubleshooting for Wi-Fi interference. Although this article is specific to the AirPort routers, it can equally apply to any manufacturers' product.

Plotting Data Incorrectly in a Scatter Plot

I am trying to plot a graph using a scatter plot in Numbers, and all of the data points are correct except for one. If you look at the data, you can see that the point that is at .00360 on the y axis(the highest point on the graph) is supposed to have an x value of .001 but instead it is too far to the right (closer to .1). This is throwing off my graph and I really need to get this fixed. Below are the links to the data table and the graph. Thanks for any help!
http://img686.imageshack.us/img686/7/picture3wc.png
http://img20.imageshack.us/img20/2035/picture4pe.png

Hi Tom,
I tried recreating your table and chart, typing in the numbers rather than having any of them calculated, and manually assigning min and max values to both axes to match yours.
The chart came out with all data points where expected.
I did notice another difference in the curve though—where yours shows three data points forming a concave-toward-the-origin section (at the leftmost portion that is correctly plotted), mine shows four data points. That led me to count the points and find that there is one point—(0.139,0.00309)—missing from your chart.
While I don't see from doing this what may be wrong with your chart, it did bring a workaround to mind that should get you a useable chart before your deadline.
Insert a new (plain) table into your document and resize it to the minimum needed to hold the two columns of data.
Select the cells containing the X axis data and Copy.
Click on cell A1 of the new table and go Edit > Paste Values.
Repeat for the Y axis data, placing it in column B of the new table.
Select the data block in the new table then insert a scatter chart.
If you still get the error, manually edit the data in the cells causing the error.
That should get you through the short term. I think someone may have to look at the actual file to solve the underlying problem.
Regards,
Barry

Modify label in a scatter plot

Hello,
I need help with a scatter plot ...
I have 3 columns of datas (column A, B and C).
I represent A on the X axis, B on the Y axis and C at the intersection.
I display labels but I need to modify them to display C, near the point. Is it possible ?
example :
10     5     test1
20     10     test2
and I want
X test2
| X test1
|____________
Thanks.

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551

How to Draw 3-D scatter plot in J2ME?

HI all
I am new in J2ME And I need to draw a three dimensional scatter plot in J2ME application. Can any body help me how to do so? It's urgent and I am eagerly waiting for your response. Even if you can tell me how to draw a 3-D point like (x,y,z)=(3,5,8) in J2ME?

I've removed the thread you started in the Java3D forum.
db

XY scatter plot in xcelsius

Hi,
Any XY scatter plot in xcelsius ,can you pass on me the add-ons url.
FYI:I have already tried out xy chart in xcelsius.It is not giving the exact visuval.
Thanks ,
satish.p

Hi Peter,
This is one of the most requested features for the JFreeChart project. It hasn't been added yet, but it is very near the top of the to-do list.
Regards,
Dave Gilbert
JFreeChart Project Leader
P.S. For anyone who is interested in JFreeChart, the link is:
http://www.object-refinery.com/jfreechart/index.html

Scatter plot with dates

The one reason i use scatter plots is to make the X axis my dates. so i see the duration between data points as real distance horizontally. I cannot for the life of me figure out how to do this on the ipad. It seems to not have a way of tweaking the data source so that I can tell it that column B (dates) is my x axis, and column C (lets say remaining data MB's, lets use something everyone on a 250 plan can associate with) is my actual data point to plot.
Anyone figure out this one yet?
Thanks,
Jason

ok, i was able to 'kinda' get it to work (not the labelling, but the scatter plot). It seems you have to select the date column first when selecting data, then drag over to the columns of plotted data and it -might- recognize the dates as the x axis. it took me a good 5 minutes playing to get it to go right.
I also had to check the "Share X values" option under the gear button.
as for the labels, it has a "Number format" and a "Same as source", but if you select same as source, it doesn't give you any choices but plain number for formatting. Same as source doesn't work at all right now for dates.
We both need to submit tickets with apple.com\feedback to let them know. I noticed other little fixes that were not documented in the 1.1 update that people had been submitting tickets on the past few weeks.
Thanks,
Jason
Jason

Scatter plot line width

First off, I'm using the trial version of iWork '09. So I want to eventually put a chart into keynote to present to my colleagues, however, putting the chart up on a projector requires me to have a thicker plot line. So if I use a scatter plot, my axis' turn out great, but I cannot adjust the line's width. I don't want symbols, I just want a line connecting the points. If I use the line chart instead of the scatter, the x-axis displays "Untitled 1, Untitled 2" as the labels. I can't change them to the corresponding numbers which is annoying. I can change everything else fine: axis line width, font size, etc. Its just eh connecting line I'm having trouble with

Actually, found a roundabout way to do this. Have to use line chart and in the x-axis label, you have to insert your formula for what cells you want such as Table 1 :: B212:B912 and just set the category counter to only include one label every so many counts. Kind of a pain, but works. However, can't have only the few tickmarks (should be 5 labels and corresponding 5 tickmarks in my case, but I have 5 labels and 700 tickmarks), all are shown instead. It tacks all of the labels individually, but you can choose which ones are shown, but cannot remove tickmarks... Any ideas?
Message was edited by: chemgoof

Hide Scatter Plot Grid

Similar Messages

Maybe you are looking for