Hide SmartView POV on Excel 2010

Is there a solution for hiding the POV in Excel 2010 or 2007?
In Excel 2003 you could use
CommanBars("POV Sheet1_1").visible=false
but in 2007 or 2010 it doesn't work. Something else?

Thanks a lot. But however is strange than if you list the CommandBar objects names, you'll find also the POVs ones!
The only solution is to move to the latest version of smartview.
Thanks

Similar Messages

Smartview 11.1.2.1.0/Excel 2010

I am using Smartview version 11.1.2.1.0 and am having issues trying to access Essbase in Excel 2010. If I try to access member selections from my Smartview menu Excel 2010 just freezes. If I try to just type in the member selections and refresh I will get #NoAccess for my results but I am connected if I look at the sheet information.
Thanks for any help you can offer

Thanks for the information, but one last question. Where could I find more information about this Unpublished Bug 9955285?, I am trying to look for more information about if it's going to be fix in any patch but I don't find anything
Thanks a lot

SmartView 11.1.2.2.000 - SmartView tab disappears from Excel 2010

We are using SmartView 11.2.2.2.000 with Excel 2010. The SmartView tab frequently disappears from the Excel menu, especially for one particular user. Each time I walk him thru re-enabling it. This user's files are usually multiple sheets. Anyone know why this keeps happening and is there a permanent way to fix it?
Thanks.
Terri T.

Check this article in MOS:
Smart View Installs Successfully on Windows 7 with Office 2010 32 Bit but Fails to Load on Excel Startup (Doc ID 1364765.1)

Smartview 11.1.2 "Hyperion" tab disappeared from his Excel 2010.

My user's Smartview 11.1.2 "Hyperion" tab disappeared from his Excel 2010. Trust Center shows that Add-In's are not disabled. We reinstalled and installed SV but nothing worked. What can we run to register SV to his Excel 2007? His Excel 2010 does have Smartview Add-in for HsTbar, Hsaddin.dll

Please note that the 'solution' of copying files to the Addins folder is NOT recommended. You will probably cause more issues or store up problems for the future, such as when you upgrade the SmartView client. Believe me -- we get a lot of calls into Support caused by people doing this. It can cause:
- loss of functionality owing to mixed file versions
- the full path to HsTBar.xla to appear in front of SmartView functions
- DLL hell when it comes to upgrading.
Please check your system for duplicate copies of HsTBar.xla and HsAddin.dll and remove all but the ones in the correct SmartView installation folder. Also delete any duplicates of the other SmartView DLLs. Then re-register the DLLs in the SmartView\bin folder according to Jasmine's instructions. Note that you must be logged into your PC as a Power User or Administrator to do this. You should get a 'success' message for each DLL you register. Alternatively, uninstall SmartView, search for any remaining SmartView files (HsTBar.xla, HsAddin.dll) anywhere on the hard drive and delete them, then re-install.
If you still get problems, log a support call.
Edited by: user807652 on Feb 17, 2011 4:28 AM

Hide Blank Rows in a Pivot Table in Outline Form in Excel 2010

In Excel 2010 Pivot Tables, using the Outline Format and Repeat Item Labels, is it possible to hide the rows with no data? Please see atch.
Doug in York PA
Douglas R. Eckert

Hi,
If you want to hide these subtotal rows, you have to use the Tabular forum, the Tabular layout is very similar to Outline except that you will not
have subtotals at the top of every group.
1.Right-click an item in the pivot table field, and click Field Settings
2.In the Field Settings dialog box, click the Layout & Print tab.
3.Check the 'Show item labels form in tabular form’
check box.
4.Click OK
Then your pivot table layout should look like the image below:
Let us know if that’s what you wanted.
Regards,
Melon Chen
TechNet Community Support

MS Excel 2010 takes long to open with Hyperion Smartview 11

Hi,
the MS Excel 2010 takes about 20 sec to open a blank sheet when is with a user without Internet access. It is automatically open with Internet access. This behaviour started after the installation of Hyperion Smartview.
Can you help?
Ant K.

I've never worked with Hyperion Smart view.
But it sounds like the program configured to access the internet and perform an operation, such as check for updates for that program. Since we know this issue may caused by the Hyperion Smart view. If it is an add-in for office, we can try
to disable it to check if excel can open blank worksheet normally, meanwhile, if you want to use this tool, you can enable it. File->options->add-in

Excel 2010 locks up when using Smartview to run Business Rule

I've been testing Smart View 9.3..3 with Excel 2010.
If (from within Smart View) I navigate to Hyperion>Calculation Options>Business Rules, Excel locks up and only an 'End Process' will close it down.
As a workaround the Rule that the user needs to run has been attached to a Form & this works correctly, wondered if anyone else had seen this ?
Thanks

re: more excel crashing
Well you asked about other ideas so...
1. Turn off Auto-Save
2. Turn off file-sharing
3. Locate the XLSTART directory, move everything there someplace else.
4. You disabled all add-ins, but does that include Com add-ins and the other flavors.
5. Does the user have an anti-virus app installed - disable it.
6. Doug Robbins (Word MVP) has an exhaustive list of problems/solutions for crashes in Office 2013.
There will be overlap with Office 2010...
http://answers.microsoft.com/en-us/office/forum/office_2013_release-customize/something-went-wrong/b178f08f-3f59-4938-8f39-2af189bffd44
7. Don't know anything about it, but another idea ...
"Fix a corrupted user profile" http://windows.microsoft.com/en-us/windows/fix-corrupted-user-profile#1TC=windows-7
Wish you good luck
Jim Cone

Excel 2010 SP2 opens files slowly after installing SP2

After installing SP2 Excel is opening files very slowly. Files can be on network share or locally, no matter. If Excel is already open, then the file opens fast as it has opened before. OS is Windows 7 64-bit, and Office Professional Plus is 32-bit. Ecxel
itself opens fast, but is slow when I double click file. Slow is about 12 seconds and fast is about 1 second with a 31 KB file from network. Network itself seems to be OK, anf Word files open fast.

From your description, I understand that you open EXCEL 2010 SP2 32-bit slowly in Windows 7 64bit.
Try to start Excel in safe mode. Then, open the Excel file.
Start the Excel program in safe mode
1.       Click Start, point to All Programs, and then point to Microsoft Office.
2.        Press and hold the CTRL key, and then click the Microsoft Excel.
If the problem does not occur in the safe mode, this issue might be related to some third-party add-ins in the Excel program, we can try to disable them.
Normally, you could do the following to disable the conflict add-ins in your Excel program:
Disable add-ins
Click File menu, click Options > Add-in, click Go button in the Manage: Com-in Add.
Check if there are any add-ins, clear the checkbox to disable them.
Close the Office program and restart it.
Add one check back each time to the list of Add-In, restart the Office program, and repeat the above procedure. Once the issue reappears again, we can determine which add-in causes this problem and then disable it.
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything I can do for you, please feel free to let me know.
Is the performance also slow when you trying to open?
At this time, we can also try to test this issue in the clean boot mode.
Test in Clean boot Mode
===============
Let’s disable all startup items and third party services when booting. This method will help us determine if this issue is caused by a loading program or service. Please perform the following steps:
1.       Click the Start Button type "msconfig" (without quotation marks) in the Start Search box, and then press Enter.
           Note: If prompted, please click Continue on the User Account Control (UAC) window.
2.        Click the "Services" tab, check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).
3.       Click the "Startup" tab, click "Disable All" and click "OK".
Then, restart computer. When the "System Configuration Utility" window appears, please check the "Don't show this message or launch the System Configuration Utility when Windows starts" box and click OK.
Note: Temporarily disabling the Startup Group only prevents the startup programs from loading at startup. This should not affect the system or other programs. We may still manually run these programs later.

Smartview for OBIEE - Excel 2007

Hello,
I have installed OBIEE 11.1.1.6.0 on my desktop with simple install. and have "SmartView" Menu on Excel 2007. When I click smartview and try to create private connection using: http://localhost:7001/analytics/jbips
by selecting "Oracle BI EE" connection provider type. I am getting the error "can not connect to the provider". Then I am getting the login screen. I entered the user id and password. Now, I am getting the login error. The login user id and password are correct because I use the same user id and password to connect to analytics, enterprise manager and console (weblogic) and my OBIEE is up and running.
Anybody has any ideas on this error?
Thank you,

No I don't think so because SV 11.1.2.3 user guide mentioned that it suports Office Excel 2007 as follows:
Office support
When working with Oracle BI EE data sources, Smart View supports these versions of Microsoft Office:
2007
2010 32-bit
2010 64-bit
Regards,
Ahmad.

64-bit Smart View + Excel 2010 64-bit Issues - Help Please

Hello everyone.
First, I am not an "IT guy" so please bare with me as I am not technical but need help.
I am running Windows 7 64-bit Professional and Excel 2010 64-bit. I installed Oracle Smart View for Office, Fusion Edition 64-bit as an add-in within Excel.
I have worked with our "Hyperion Admins" to connect to the right server so that my "private connections" are set correctly (hopefully that makes sense).
However, when I attempt to refresh my Smart View query I end-up retrieving no data. The "refresh" button under "Smart View" in Excel will proceed as a refresh is occurring but then not return data (I know this Smart View template works as I've used it many times on 32-bit Excel).
Our admins have informed me that I cannot use 64-bit Smart View because our "server" is on a 32-bit O/S (or something similar to that). To me, the logic doesn't make sense and I'm hoping that there is a solution the admins are not aware of.
Happy to answer any questions and appreciate any help.

JDN wrote:
We had a similar experience as JTF, HsGetValues would not work but the AdHoc function worked fine. I put in an SR with Oracle and they refereced the below document. We ended up having IT install 32 bit office on the machine along with 32 bit Smartview (11.1.2.2.300) and now it is working fine.
Regards,
Jason
Some Smart View Functions Do Not Work in Excel 2010 64-bit. [ID 1463814.1]
To Bottom
Modified:Aug 30, 2012Type:PROBLEMStatus:PUBLISHEDPriority:3
Comments (0)
In this Document
Symptoms
Cause
Solution
References
Applies to:
Hyperion Financial Management - Version 11.1.2.2.000 and later
Information in this document applies to any platform.
Symptoms
When using Smart View (SV) with Microsoft Office 2010 SP1 some SV functions do not work or cause Excel application to crash.
Cause
In 64-bit versions of Excel 2010 SP1, the presence of Smart View functions may cause Excel to terminate abruptly and may prevent Copy Data Point and Paste Data Point functions from working. This has been identified as a defect in Microsoft product.
Solution
Use the 32-bit version of Smart View until Microsoft issues fix for their 64-bit Office products.
References
@ BUG:13606492 - USING HSSETVALUE FUNCTION CAUSES EXCEL CRASH
14091219
Related
Products
•Enterprise Performance Management and Business Intelligence > Enterprise Performance Management > Financial Management > Hyperion Financial Management > Smart View > Smart View
Keywords
BIT;CRASH;EXCEL;HSGETVALUE;MICROSOFT;OFFICE 2010;SMART VIEW;SMARTVIEW;SP1;DYNAMIC ADV PROBLEM SOLUTIONCan you use the 32-bit Smart View with 64-bit Office? Unfortunately, 32-bit Excel cannot handle my files so I am forced to use 64-bit so going back to a 32-bit Office will not work for me.

Excel 2010 for version 11.1.1.3

Hi gurus,I'm working on Hyperion v 11.1.1.3, i want to use excel 2010 as a client for this version.I want to know that is excel 2010 compatible for V11.1.1.3?
1)If not then how to upgrade to excel 2010 for this version and what all precautions/procedures needs to be followed during up-gradation to avoid the issues if any?
2)what excel version that Oracle recommends for v11.1.1.3 and the patches to apply if want to upgrade?
3)How do we find the add-in/smart-view client version on the essbase server(path to folder/directory on the sever)?
4)Is it possible to apply the patch-if we want to upgrade from excel old version to higher version, on user machine instead of applying the patch on server itself?
Thanks in advance

Hi Kailash,
Hope this document is helpful!
SmartView 11.1.1.3 Compatibility with Office 2010 (Doc ID 1290682.1)
-Priya
Edited by: PriyaPeravali on Sep 13, 2012 10:31 PM

Excel 2010 missing default suggested file name in Save As dialog box

I’m using Excel 2010 running on Windows 7 (32 bit). When I open a certain file which produces the following message: "A file is in a different file format than its extension indicates", and then go to “Save As” (or “Save”) the
file, the default suggested file name is missing (blank). This didn't occur in previous versions of Excel.
In previous versions, Excel would automatically populate the original file name in to the File Name field.
I have searched all over the net, looking for a way to change Excel so that it will once again populate the file name in this situation.
To reproduce:
Create a new blank workbook
save as type “Web Page”, (i.e. File name: “Blank Example.html”)
Close workbook
In windows, rename file from .html to .xls (i.e. rename “Blank Example.html” to “Blank Example.xls”)
In Excel open renamed file (i.e. “Blank Example.xls”) and click “Yes” when prompted with the “A file is in a different file format than its extension indicates” message.
Do a “Save As” and you will notice that the File Name is blank. In previous versions, this field would contain the current workbook file name
(i.e. “Blank Example.xls”)
Any help will be greatly appreciated.

Hi Jaynet,
In order to re-produce this, you need to answer "yes" to the rename file prompt and then continue with step 5 (above).
The reason for this is not an exercise in futility - I assure you. At my work and elsewhere, when web developers have created features to permit the end user to save web data in Excel format, often times the Excel files are saved locally in Excel's
html format (but with the .xls
extension).
(I actually prefer the .xls
extension, because it is easier to just double-click the file to open in Excel, rather than to select the open-with and then select Excel. a file with the .html extension will default open in your default browser. Now, I could change my default program
for the .html extension, but that would only solve a part of the problem and would not really address the bigger issue and that being that Microsoft changed a behavior in Excel and may not even be aware that it was a much used feature. )
To continue, when I go to open the resulting Excel file, I am prompted with the message that the file type does not match the extension (which is fine and not bothersome to me). It's at this point when I go to save the file that I get really annoyed.
In previous versions of Excel, the default file name would be pre-filled with the current name of the file and the default file type would state that it is a Web html file. I would just change the file type to Excel Workbook and hit enter to save.
I would be prompted with "Are you sure you want to overwrite your existing file?" message and I would click "yes" and that would be that.
However, in Excel 2010, because the default file name is blank, I then need to re-type the name into the field to save the file.
Any help is greatly appreciated.
Thanks

Unable to read data in Excel 2010/2013 from encrypted Access 2010/2013 database

A customer has an Access database (.accdb), which was encrypted/given a database password in Access 2013. It should be possible to read that data from Excel 2010/2013, but when clicking on Data-->From Access
and the correct path is put in and the correct database password has been entered, Excel just keeps prompting for the database password. This happens with both Excel 2010 and 2013.
The database password supplied is correct as evidenced by opening the database in Access 2013 using the same database password.
A colleague in a separate company has found that a separate .accdb file he has recently encrypted also has the same problem as above, yet a .accdb file encrypted ages ago
is readable from Excel.
How do I get Excel 2010/2013 to read the data from the encrypted .accdb file, please?

Since Access 2010 the encryption algorithm has changed:
Source
Follow the next steps to apply an encryption method that will allow you to (programmatically) connect to the database:
1. Decrypt the database
2. Change the encryption method:
   - In Access Options select 'Client Settings'
   - Scroll down to section 'Advanced'
   - 'Encryption Method': select option 'Use legacy encryption (..'
   - Click 'OK'
3. Encrypt the database
Hope this helps.
Emiel Nijhuis

Excel 2010 Synchronize List with SharePoint List using VBA

I have used and loved the interaction between Excel and SharePoint for many generations of both solutions. It's a wonderful opportunity to integrate the familiarity and simplicity of Excel (formatting, ease of use, availability) with the data storage
and centralized list capabilities of SharePoint. Right?
When upgrading to Excel 2010, I have noticed with much dismay that much of the inherent easy to use features of previous versions were effectively stripped from this newest version. Much research, time and energy has been spent working around and resolving
the deficiency. One Microsoft based article,
http://support.microsoft.com/kb/930006, has provided the mechanics behind utilizing the "hidden" functionality... although, this capability to use VBA to create the synchronized list was available in previous versions. However, once Microsoft
published this article to this "hidden" functionality... I feel that the behavior should be supported by Microsoft in some way. OK?
Revised instructions to reproduce the problem:
1. Create a SharePoint list with 20 dummy records.
- Note the List Name ##LIST_NAME##
- Note the View GUID ##VIEW_GUID##
- Note SharePoint Base URL ##BASE_URL##
2. REVISED... In Excel 2010, save the file as Compatible "Excel 97-2003 Workbook". Close the file and reopen.  Create a connected table (ListObject) in Excel using the article above to the SharePoint list. Use Sample VBA code
below:
Sub LinkedSharePointList()
ActiveSheet.ListObjects.Add SourceType:=xlSrcExternal,_
    Source:=Array(##BASE_URL## & "/_vti_bin", ##LIST_NAME##, _
    ##VIEW_GUID##), LinkSource:=True, Destination:=Range("A1")
End Sub
3. OOPS REVISED this item. The problem is actually with ROW 21... So, update record on row 21... (no matter where the table is located... (if the "Destination" is "A1", then the problem is with ID=20, but if the Table is
shifted down to say A12, then ID=9 on row 21). Anyway... make a simple change to that record... and you'll see the ID immediately change.... as if it's a NEW record. WEIRD! Note: If the sheet is protected, then an error is displayed
indicating that a "read-only" record cannot be updated (referring to the ID cell in column A for the current row).
4. Now "synchronize" the list with excel. The former record is still in the list unchanged AND there is a NEW record in the list holding the changes. There are a number of problems that seem to ONLY occur when something changes to ROW
21.... Next, try to copy/paste multiple records across multiple rows that intersect with ROW 21. Yikes!!
I look forward to hearing others' experience!
Thanks!
Mark

Here are some things that you can try (change the code, where appropriate):
Private Sub CreateList()
    Dim folder As folder
    Dim f As File
    Dim fs As New FileSystemObject
    Dim RowCtr As Integer
    RowCtr = 1
    Set folder = fs.GetFolder("http://excel-pc:43231/Shared Documents/Forms/") '<=Variable Location
    For Each f In folder.Files
       Cells(RowCtr, 1).Value = f.Name
       RowCtr = RowCtr + 1
    Next f
End Sub
Sub ListAllFile()
Dim objFSO As Object
Dim objFolder As Object
Dim objFile As Object
Dim pth As String
Dim WBn As Workbook
Dim ObCount As Long
Dim FileNme As String
Application.ScreenUpdating = False
Set objFSO = CreateObject("Scripting.FileSystemObject")
'Get the folder object associated with the directory
Set objFolder = objFSO.GetFolder("\\excel-pc:43231\Shared Documents\Forms\")
'** You'll need to specify your path here. By removing the http: from the path, the code liked it & found the folder. It wasn’t working previously ***
pth = "http://excel-pc:43231/Shared Documents/Forms/"
'** You'll need to specify your path here. The reason I’ve done this separately is because the path is not recognised otherwise when trying to specify it with workbook.open & using the value set for objFolder **
ObCount = objFolder.Files.Count
'** counts the number of files in the folder
'Loop through the Files collection
For Each objFile In objFolder.Files
Nm1 = Len("http://excel-pc:43231/Shared Documents/Forms/")
'** You'll need to specify your path here **
Nm2 = Len(objFile) - Nm1
FileNme = Right(objFile, Nm2)
'** I’ve done this part to find out/set the file name**
Set WBn = Workbooks.Open(pth & FileNme, , , , Password:="YourPassword")
'** opens the first file in the library – if there is no password, the remove everything from - , , , , Password:="Password1" – leaving the close bracket ‘)’
Application.ScreenUpdating = False
'** optional – you can leave the screen updating on
'<< Your coding here>>
'** The file is now open. Enter whatever code is specific to your spreadsheets.
Next
'** goes to next file within your sharepoint folder
End Sub
Sub SharePoint()
Dim xlFile As String, xlFullFile As String
Dim xlApp As Excel.Application
Dim wb As Workbook
xlFile = "\\excel-pc:43231\Shared Documents"
'http://excel-pc:43231/Shared Documents/
'****----denotes the path.(i.e) u give the path as windows search.Don't use "\" at the end.
'In the sharepoint path %20 denotes space.so u remove that and use space .
Set xlApp = New Excel.Application
xlApp.Visible = True
xlFullFile = GetFullFileName(xlFile, "Book") 'ANZ denotes starting characters of the file.
xlFile = xlFile & "\" & xlFullFile
Set wb = xlApp.Workbooks.Open(xlFile, , False)
'Once the workbook is opened u can do ur code here
wb.Close False
End Sub
Function GetFullFileName(strfilepath As String, _
strFileNamePartial As String) As String
Dim objFS As Variant
Dim objFolder As Variant
Dim objFile As Variant
Dim intLengthOfPartialName As Integer
Dim strfilenamefull As String
Set objFS = CreateObject("Scripting.FileSystemObject")
Set objFolder = objFS.GetFolder(strfilepath)
'work out how long the partial file name is
intLengthOfPartialName = Len(strFileNamePartial)
For Each objFile In objFolder.Files 'Instead of specifying the starting characters of the file you can directly loop through all files in the folder .
'Test to see if the file matches the partial file name
If Left(objFile.Name, intLengthOfPartialName) = strFileNamePartial Then
'get the full file name
strfilenamefull = objFile.Name
Exit For
Else
End If
Next objFile
Set objFolder = Nothing
Set objFS = Nothing
'Return the full file name as the function's value
GetFullFileName = strfilenamefull
End Function
Sub SrchForFiles()
' Searches the selected folders and sub folders for files with the specified (xls) extension.
'ListTheFiles 'get the list of all the target XLS files on the SharePoint Directory
Dim i As Long, z As Long, Rw As Long, ii As Long
Dim ws As Worksheet, dd As Worksheet
Dim y As Variant
Dim fldr As String, fil As String, FPath As String
Dim LocName As String
Dim FString As String
Dim SummaryWB As Workbook
Dim SummaryWS As Worksheet
Dim Raw_WS As Worksheet
Dim LastRow As Long, FirstRow As Long, RowsOfData As Long
Dim UseData As Boolean
Dim FirstBlankRow As Long
'grab current location for later reference, for where to paste final data
Set SummaryWB = Application.ActiveWorkbook
Set SummaryWS = Application.ActiveWorkbook.ActiveSheet
y = "xls"
fldr = "\\excel-pc:43231\Shared%20Documents\Forms\AllItems.aspx"
FirstBlankRow = 2
'asd is a 1-D array of files returned
asd = ListFiles(fldr, True)
Set ws = Excel.ThisWorkbook.Worksheets(1) 'list of files
ws.Activate
ws.Range("A1:Z100").Select
Selection.Clear
On Error GoTo 0
For ii = LBound(asd) To UBound(asd)
Debug.Print Dir(asd(ii))
fil = asd(ii)
'open the file and grab the data
Application.Workbooks.Open (fil), False, True
'Get file path from file name
FPath = Left(fil, Len(fil) - Len(Split(fil, "\")(UBound(Split(fil, "\")))) - 1)
'Get file information
If Left$(fil, 1) = Left$(fldr, 1) Then
If CBool(Len(Dir(fil))) Then
z = z + 1
ws.Cells(z + 1, 1).Resize(, 6) = _
Array(Dir(fil), LocName, RowsOfData, Round((FileLen(fil) / 1000), 0), FileDateTime(fil), FPath)
DoEvents
With ws
.Hyperlinks.Add .Range("A" & CStr(z + 1)), fil
'.FoundFiles(i)
End With
End If
End If
'Workbooks.Close 'Fil
Application.CutCopyMode = False 'Clear Clipboard
Workbooks(Dir(fil)).Close SaveChanges:=False
Next ii
With ws
Rw = .Cells.Rows.Count
With .[A1:F1]
.Value = [{"Full Name","Location","Rows of Data","Kilobytes","Last Modified", "Path"}]
.Font.Underline = xlUnderlineStyleSingle
.EntireColumn.AutoFit
.HorizontalAlignment = xlCenter
End With
.[G1:IV1 ].EntireColumn.Hidden = True
On Error Resume Next
'Range(Cells(Rw, "A").End(3)(2), Cells(Rw, "A")).EntireRow.Hidden = True
Range(.[A2 ], Cells(Rw, "C")).Sort [A2 ], xlAscending, Header:=xlNo
End With
End Sub
Function ListFiles(ByVal Path As String, Optional ByVal NestedDirs As Boolean) _
As String()
Dim fso As New Scripting.FileSystemObject
Dim fld As Scripting.folder
Dim fileList As String
' get the starting folder
Set fld = fso.GetFolder(Path)
' let the private subroutine do all the work
fileList = ListFilesPriv(fld, NestedDirs)
' (the first element will be a null string unless the first ";" is removed)
fileList = Right(fileList, Len(fileList) - 1)
' convert to a string array
ListFiles = Split(fileList, ";")
End Function
' private procedure that returns a file list
' as a comma-delimited list of files
Function ListFilesPriv(ByVal fld As Scripting.folder, _
ByVal NestedDirs As Boolean) As String
Dim fil As Scripting.File
Dim subfld As Scripting.folder
' list all the files in this directory
For Each fil In fld.Files
'If UCase(Left(Dir(fil), 5)) = "MULTI" And fil.Type = "Microsoft Excel Worksheet" Then
If fil.Type = "Microsoft Excel Worksheet" Then
ListFilesPriv = ListFilesPriv & ";" & fil.Path
Debug.Print fil.Path
End If
Next
' if requested, search also subdirectories
If NestedDirs Then
For Each subfld In fld.SubFolders
ListFilesPriv = ListFilesPriv & ListFilesPriv(subfld, NestedDirs)
Next
End If
End Function
Finally . . .
Sub ListFiles()
    Dim folder As Variant
    Dim f As File
    Dim fs As New FileSystemObject
    Dim RowCtr As Integer
    Dim FPath As String
    Dim wb As Workbook
    RowCtr = 1
    FPath = "http://excel-pc:43231/Shared Documents"
    For Each f In FPath
    'Set folder = fs.GetFolder("C:\Users\Excel\Desktop\Ryan_Folder")
    'For Each f In folder.Files
       Cells(RowCtr, 1).Value = f.Name
       RowCtr = RowCtr + 1
    Next f
End Sub
Sub test()
    Set objFSO = CreateObject("Scripting.FileSystemObject")
    Set objFolder = objFSO.GetFolder("C:\Users\Excel\Desktop\Ryan_Folder")
    'Set colSubfolders = objFolder.SubFolders
    'For Each objSubfolder In colSubfolders
       Cells(RowCtr, 1).Value = f.Name
       RowCtr = RowCtr + 1
    'Next
End Sub
Ryan Shuell

The goal is to synchronize an excel sheet using Microsoft Excel 2010 with Sharepoint 3.0

The goal is to synchronize an excel sheet using Microsoft Excel 2010 with Sharepoint 3.0. We have already installed an add-in (Excel 2007 Add-in: Synchronizing Tables with SharePoint Lists) that was supposed
to help the synchronization of excel to Sharepoint, but it did not work. We would like to synchronize information about a calendar from excel to Sharepoint 3.0, so every time a change is made in excel it automatically updates in Sharepoint.

ootb, changes in excel don't sync with a SharePoint list, the other way around is possible.
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

Hide SmartView POV on Excel 2010

Similar Messages

Maybe you are looking for