Hide ssid from specific APs, is it possible?

Hello Experts,
Can i hide specific ssid from specific APs?
Is there any method avilable ?
If yes then can you please tell me the config ??
THANKS IN ADVANCE.

Hi,
Yes, it is possible.
You can use AP Groups to define what AP's will have what SSID's.
By creating AP Groups you can control  What SSIDs advertise on which APs, What dynamic interface map to each AP group (to reduce the broadcast size while having the same SSID).
Here are the 2 links which helps u to configure AP groupes.
http://mrncciew.com/2013/05/30/configuring-ap-groups/
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008073c723.shtml
Regards
Dont forget to rate helpful posts.

Similar Messages

  • Broadcasting SSID to specific APs connected to same WLC

    Hello all,
    I just have a quick question.  Is it possible to broadcast specific SSIDs to specific access points that are connected to the same controller?  For example, SSID-A is for wireless clients located in building A within the campus; same for SSID-B and so forth?  My assumption is that all LWAPs will broadcast all SSIDs configured on the WLC.
    Regards,
    Terence

    If WLAN ID number is  between 1-16 & AP belongs to "default-ap-group" WLC will broadcast all those SSID via APs on that ap-group..
    You can do what you required easily by defining a AP-GROUP. Once you defined AP-Group you can selectively advertised SSID on particular APs. Also you can give different subnets for same SSID based on your grouping requirement.
    Here is a reference for AP group configuration. It may help to understand this
    http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008073c723.shtml
    HTH
    Rasika
    **** Pls rate all useful responses ****

  • Cisco Prime how to hide SSID

    Hi there.
    I need to hide SSID from broadcast from Cisco Prime. 
    I can do this easily on WLC by un-checking 'broadcast' under SSID on WLC but I have controller which I only have access through Cisco Prime. 
    So I would like to find out how I can disable broadcast on Cisco Prime please.
    Thanks in advance

    Refer : creating / adding templates
    http://www.cisco.com/c/en/us/td/docs/wireless/prime_infrastructure/1-3/configuration/guide/pi_13_cg/temp.html#20699

  • How to identify relevant BADIs to hide a screen field from specific users

    We have a business requirement to hide a document item field (BSEG-XREF3) from specific users (i.e make the field invisible if the userid does not exist in a Z table) during FI invoice entry/maintenance/display via transactions FB01, FB02, FB03, FV50, FV60, FBV0, etc..  We know that it would be possible to do this via modification to the Process Before Output sections of LF040O00, LFDCBFM0, MF05AO00_DYNPRO_MODIFIZIEREN, MF05LO00, but would prefer to avoid modification if possible. 
    I believe that BADIs could possibly be used for screen enhancements, but have not had any previous exposure to BADIs, so I'm really not sure whether it's possible to use BADIs for our specific requirement.  For example, using the advice given in the 2nd post in thread BADI for contract, I've searched SAPMF05A for all 'CALL METHOD cl_exithandler=>get_instance' statements, and have found that a single BADI (FBAS_CIN_MF05AFA0 - EWT - Downpayment Clearing - Tax transfer for CIN) seems to exist for FB01.  The description of this BADI sounds completely inappropriate for our requirement.  However, subsequent posts in that thread suggest far more BADIs for the relevant transaction than were given when searching the ABAP for all 'CALL METHOD cl_exithandler=>get_instance' statements, so I'm not convinced that the procedure I'm following will provide me with all the relevant BADIs for the transaction.
    Please can you advise me how to identify which BADIs - if any - can be used to control screens before output for FB01 screen SAPMF05A/332 (SAP R/3 4.6C)? 
    Many thanks in anticipation,
    Jules

    Hi Kuntal,
    Thank you very, very much for your prompt response and very useful alternative suggestion.
    The screen variant solution would be invaluable under different circumstances, but would be too complex to administer for this particular issue because we're trying to hide the field from unauthorised users in over 100 invoice entry/maintenance/display transactions. 
    We can make a Process Before Output modification to 4 SAP standard programs (LF040O00, LFDCBFM0, MF05AO00_DYNPRO_MODIFIZIEREN, MF05LO00) to make the field invisible for unauthorised users (i.e. whose user-ids are not in a Z* table), but would prefer to avoid modification if we could use BADIs instead.  You've said that you're not sure how we can identify the relevant BADIs, but I very much appreciate the suggestion you've made anyway - it might be useful to others who find themselves in a similar situation for a more limited number of transactions.
    Please can someone advise me how to identify which BADIs - if any - can be used to control screens before output for FB01 screen SAPMF05A/332 (SAP R/3 4.6C)?
    Many thanks,
    Jules

  • Internet sharing: is it possible to hide SSID?

    I sometimes use +internet sharing+. Is it possible by any means to *hide the SSID* ? I think it was possible back in OS9 times, but can't find any information about OSX tweaks to do so... Any hints appreciated.
    mt
    ps: I do know about encryption etc. it's not this piece of story...

    any ideas? I cannot believe it's impossible...

  • Is it possible to block all email accounts from specific websites?

    im suffering with lots of spam emails from several websites, ive found out how to automatically delete specific emails from specific email addresses, ie [email protected] but i get lots of spam from various names at the same website. so is it possible to block all emails from example spammer.com??
    any help on this would be great. thanks :)

    To block messages from a specific sender:
    https://support.mozilla.org/en-US/kb/blocking-sender
    This method doesn't work well for spam messages. For spam set-up junk mail controls for your account.
    http://kb.mozillazine.org/Junk_Mail_Controls

  • Is it possible to ignore postings from specific users

    Hello,
    is it possible to create a "black list" that will filter out postings from specific users?
    Regards
    Thomas

    Intriguingly this answer seems to suggest a global one is possible.
    Is it like Survivor and we get to vote who goes on it?

  • Hiding a document library from specific users or groups.

    Just FYI I am far from a SharePoint but have able to accomplish a lot from everyone's help on the forums, so thank you in advace.
    Now, Is it possible to hide a document library from specific users or groups? Here is what I am trying to accomplish.
    We have a Document library that we want the whole company to view, we will call this Company Share. We then want to have a separate library/app that
    is only visible to the Finance department. Then another library that is only visible to the shipping dept.
    So when Linda from finance logs into the SharePoint site under Site Contents she should only be able to see 2 items, Company share and Finance.
    Tom from shipping will only see Company Share and Shipping. Administrators and Management will see Company share, finance and shipping.
    I was able to hide the library using sharepoint designer by checking the box "Hide from Browser" which worked but now none of the users can view the library.
    They are only able to access it via a direct URLl link.
    Any help is appreciated.

    Hi 3s1k,
    What did you mean that "management does not want the actual folder library they are in to be visible"?
    Please give more information about your requirement?
    Best Regards,
    Wendy
    Wendy Li
    TechNet Community Support

  • Hide SSID with Hub 3

    Hi,
    just got a new Hub 3 but as I've got some legacy devices that connect wirelessly but can only use WEP I've had to switch from WPA2 to WEP and wish to hide my SSID.  I found this post....
    http://community.bt.com/t5/BB-Speed-Connection-Issues/how-to-hide-ssid-on-the-new-hub-3-0/m-p/217965...
    which implies that hiding SSID is not available on Hub 3.
    soooo I just want to confirm that this "useful security precaution" is no longer available at all with Hub 3 (as opposed to is not available with Hub 3 configured for WPA2).
    Thanks.

    Is it possible to update the drivers or firmware for these devices?
    You could simply add a separate wireless access point for these devices, that uses MAC filtering and can hide the SSID.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Is there a way to Hide data from Users in Cubes?

    Hello All,
    Is there a way that I can easily hide data from users. For instance, in the XYZ cube we have data loaded through the year 2005. Is there a way for me to still keep the data in the cube; however, just hide 2005 so when users go in they do not see the year 2005. I know we can set filters and then apply "none" on select members. But the disadvantage with this is the data at the top level shows up as No access and it is only when the users drill down will they be able to see the data. So instead is it possible to hide data with everything else just normal?
    Thanks,
    Ted.

    Celvin Kattookaran wrote:
    With MetaRead Year will show up as "No Access"/Missing for users. http://docs.oracle.com/cd/E12825_01/epm.111/esb_techref/frameset.htm?maxl_meta_read.htm
    Thanks for the reply Celvin, So I understand from the link you posted that when using metaread the data of the ancestors is hidden. However in our case Years data is not getting hidden.:)
    I think this is because Under years we have CY, LY-1, LY-2, LY-3,LY-4,LY-5,LY-6,LY-7 as children. However Only CY Consolidates to Year. So I create a metaread to include CY, LY, LY-1,LY-2,LY-3,LY-4,LY-5,LY-6 members and not LY-7. As a result my Year still includes data as CY is included in the metaread filter.
    So this tells me(please please correct me if am wrong) it is not a must like indicated in the technical reference that data will be missing/No Access for ancestors of the metaread members. Data will be shown as No Access/Missing for an ancestor only if the members the ancestors consolidate from are not included in the metaread! Please let me know if this is right. I have verified it on my end but I would like to know what you think as Tech Reference sounds like "if metaread read filter is used, ancestor data will be hidden" which is not true.
    Thanks,
    Ted.

  • Does any one know how to Disable/Hide "BCC" from outlook/owa in office 365?

    Hi,
    Does any one know how to Disable/Hide "BCC" from outlook/owa in office 365?
    Thank You.

    Hi Kavin,
    You can try the below steps on the OWA server box,
    search for this file name in explorer
    File name: "messageoptionsdialog.aspx"
    open this file in notepad
    search for "chkbcc" you'll find something like this "input type="checkbox" id="chkBcc"
    you need to update the LINE BEFORE IT to <td style="visibility:hidden">
    Try this and let me now if this worked
    Although I've not tried this for the OUTLOOK client, you can try this and check if you need
    But this has worked for OWA for one of my client
    I'm also not very sure if this can be achieved on all of your outlook users from a server admin point of view, coz this is a client feature and not a user specific active directory attribute.
    Thanks & Regards
    John Chris 

  • Extract XMP metadata from specific Photoshop Layer in After Effects

    How do it extract XMP metadata from specific Photoshop Layer in After Effects?
    I am just getting my hands dirty with metadata.
    I know it is possible to attack metadata to a layer/layerset in Photoshop, but how to I get it out in After Effects.
    Here is the process.
    I create BunchaLayers.psd.
    Using the PerLayerMetaData.jsx file attached.
    I use the setCommMetadata("something") function to attacked metadata to a selected layer.
    I know that is is there because I check it using the exportLayerMetadata().
    I save and imprt BunchaLayers.psd into AE as a comp.
    Here I am lost.
    I select my layer in the project window and check the XMP metadata window.
    I can't find my comment.
    Is the XMP data actually attached to the layer I imported in AE?
    I want to be able to select the layer and see that the data is attached.  Is this possible?
    If it is will it work on layersets (comps in AE)?
    I would appreciate any layer specific XMP insight.
    Thanks for looking.
    - Josh

    John Nack on Adobe : Per-layer metadata comes to Photoshop
    This was the article that made me think this might be possible.
    There is also the preference to Create Markers From Metadata
    ["Metadata"]
              "CreateLayerMarkersFromFootageXMP" = 01
    Which made me wonder if there is a way to create the metadata in the first place that made it something AE would read and automatically change to layer markers.
    Any ideas?

  • Hide actions from panel

    Hi,
    I have a batch of actions which are called from other actions and I would like a way to hide these from showing in the panel.
    Cheers
    Kenny

    You can collapse actions sets to hide the actions within so navigating the Action palette is easier. Its not possible to hide individual actions within actions and action sets can not be nested.  Navigating the Action palette can be tedious.  However it much easier than navigating scripts. If you have a large collections of scripts.  Photoshop menu File>Scripts>Large Script List...  Photoshop only scroll that large list a single item at a time.  So one wind up adding even more  actions that use scripts into the Action Palette crowing the Actions palette further. For the Action palette is easier to navigate the scripts.

  • How to get "Layer Mask Hides Effects" from Photoshop Plug-in

    How to get "Layer Mask Hides Effects" from Photoshop Plug-in.

    I don't think there's enough information here to give an answer.  Is this a Plug-in that you're writing or intend to write?  If so, what type of Plug-in is it?
    If you are writing your own plug-in, the header files included in the Photoshop SDK/API have a bunch of defines for the proper codes to use.
    PITerminology.h has a large amount of keys that can be used to query for information.  PIUGetInfo is probably the function that you want to call to determine what you need to know.
    If you're looking for information about a specific layer, you will want to make a new PIActionDescriptor, call sPSActionDescriptor->Make(*PIActionDescriptor), and then call GetLayerInfo on the layer that you're querying information about.
    You can then call sPSActionDescriptor->Get<datatype> on the layer while passing in the key of the data that you want.

  • How to hide ribbon from all item view for particular user group

    hi friends
    how to hide ribbon from all item view of particular list for specific user group.
    using OOB functionality or javascript. 

    Hello,
    Use this codeplex tool to hide ribbon to user group:
    http://spribbonvisibility.codeplex.com/
    If you don't want to use above tool then you have to add SPSecuritytrimming in "Rajiv Kumar" code for filtering based on user group permission.
    http://www.topsharepoint.com/hide-the-ribbon-from-anonymous-users
    Hope it could help
    Hemendra:Yesterday is just a memory,Tomorrow we may never see
    Please remember to mark the replies as answers if they help and unmark them if they provide no help

Maybe you are looking for

  • Report Painter Error GR397

    Dear Experts, I have a problem about accounting period (1-12 and 1-16) The old balance sheet  period is 1-12. I need to add 13-16 period to B/S. But, the system have a message as follow: Could someone please tell me how to fix it? Regards, Stanley

  • How to control "spraying" of cache items?

    For a partitioned cache (no backups), is there a way I can control which node a cache item goes to? I have, say, 100,000 items I need to process on a 3-node cluster using an agent. As I am loading my cluster with the cache items, I wish the 20,000 "r

  • Missing icon on task bar of executable powerbuilder

    I have a very strange issue....   This occurs when I execute our software application that has been build with powergen( powerbuilder).  When I execute the executable( acct123.exe) that was built, some of the icons that we created and use ( on a task

  • Subform auto-sequencing with alpha chars

    Hi, can anyone help with my problem?  I need to generate autosequence in a repeated subform with alpha chars ('a)', 'b)', etc.) instead of numeric.  Thanks in advance!

  • Run-time 2009 executable error

    Hello, I've have loaded the 2009 run-time environment onto my computer and this has installed ok; however when I try and run an executable file, built successfully in the 2009 version, the error message that the 2009 runtime engine can't be located c