Hide SSN Field

HI Folks,
How do we lock/hide SSN field to a ceratin user group in the PA30 and PA40 screens with out doing config chnages. Is there anything a security consultant can do? Please advise.

One option is to use screen variants.
<a href="http://help.sap.com/saphelp_47x200/helpdata/en/7d/f63a0d015111d396480000e82de14a/frameset.htm">Look at the SAP Help pages</a>
Good luck
//freppe

Similar Messages

Hide SSN Number in 0employee_attr

Hi,
I want to hide SSN Number in the extractor "0employee_attr". have tried RSO2 to eddit the data source, but I get the message which says " 0EMPLOYEE_ATTR is extracted using functional module HR_BIW_GET_MASTER_DATA" and it does not allow me to edit the data source. Any idea how I can address this issue...

Go to RSA6 transaction and edit the datasoruce over there...
You can hide the field there and save.
RSO2 transaction is used only for generic datasources it cant be used for standard ones.
Edited by: mansi dandavate on Aug 14, 2009 6:58 AM

In ALV report.The user wants to hide specfic fields

Hi
In ALV report.The user wants to hide specfic fields but the user must be able to add these fields to the report:
can any one give the suggestions

in reuse alv list display or grid
i_save = 'A'.
now user can choose the layout.
for hiding
in fieldcat
wfieldcat-No_out = 'X'.
regards
shiba dutta

How to add and hide more fields in PPM?

Hello,
Im new to this tool and I would like to know how to add and/or hide customized fields. I've only know that Its somewhere under SPRO > Global Enhancements to Project Elements but Im a little bit lost there. Can somebody explain to me with details how to do this and also, does this need a specific access of developer to do this customization?
As this is a basic need for all, anybody that is new on the tool and search for this will have a good reference on this thread.
Thanks in advance.
Many regards!

The path is SPRO > Global Enhancements to Project Elements > Setup field control.Herein,once you select the field control you may proceed towards defining the conditions that influence the same. A step by step approach is explained in the below article that will aid you to change properties of custom fields.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/3053cee2-4bca-2d10-38ae-efff39ad248e
Regards,
Pradeepkumar Haragoldavar

Hide a field in ALV "Display Details" list

Hi Experts,
I have a requirment where I have to hide a field in ALV output, as well as in "Details display". I already put NO_OUT = 'X' for that field in fieldcatalog itself. It is hidden in the ALV output anyway, but the problem is when user selects a row and clicks on "Details" button in toolbar of ALV, it still displays the hidden fields of that ALV list with/out headings there.
Hope you understood my problem, pls respond soon if you hav any solution for this?
Thanks
Sarav

Use TECH = 'X' in field catalog.
Regards,
Raymond

How to hide the field from the view in the webdynpro application?

Hi Gurus,
I got a requirement where in which ,default layout has the field name Time.......To......... which is (2 input box ) and one lable assigned to the container.........
Now my requirement is to hide this field from the layout for all cases of leave......(all types of leave)....
I got a few inputs from forum that we can achieve this by implementing the following steps..........
Create In context => Value attribute => Say Visibility
Go to its properties
Select com.sap.ide.webdynpro.uielementdefinitions.Visibility
In View Layout
Select UI Element Set Visible property to this context variable Visibility.
In wdDoModifyView() You can set this property to false
wdContext.currentContextElement().setVisibility(false);
Can you people tell me where to create the value attribute........
In the view context or in the component context...........
and field that am talking about is assign to the container you want me to assign this context variable property to all ......Like to input box ,label and the container..........
Please calrify this ASAP...........
Thanks in Advance,
Dharani

Hi Manoj......
Hi Murutuza,
As per your guidelines I have created the value attribute in View context (which has the field..... which needs to be hide)inside the value node say FieldVisibility.......and attribute name OldTimeDuration......and I set this value with uidefeneitions Visibility .......
and I bind this vaule with the field property visible(Time.......To..........)which I need to hide...........
Now in the view implementation tab ..........I have coded in the doinit method(since my requirement to hide the field from the layout in all cases).........
wdContext.currentFieldVisibilityElement().setOldTimeDuration(WDVisibility.NONE);
But if I deploy the application and see still am getting the same field dispalying in the screen.........
I even tried putting this code in wdmodifyview method.........same results........
Kindly tell me how to hide the field permenantly from the screen............(without any conditions.)
Thanks in Advance,
Dharani

How i hide a field of a custom view in OAF 11

Hi, im a new developer of OAF11.
What should I do, to customize the Purchase Order screen, if then the requirement is to hide the field that i insert from extended VO.
What I did was modify the XML of the page to add the field and then extended the original AM.
I added the extended view into the custom AM to prevent that fail with the field that i insert.
I must clarify that I modify the path of AM default for the path of the custom AM in the XML, then i upload the XML with the command import, and i see it the field in the page.
I tried to hide another field that i created by customizing the page, but I couldnt do. That´s why i insert directly the field in the XML original.
I Try to customize the driver involved with the page, but nothing happened.
First try it on the controller Father and after the son.
The page is in the POS module (iSupplier), and is POSVIEWPOG (PO Details).
The code that attempts to hide the field is:
OAApplicationModule am = paramOAPageContext.getApplicationModule(paramOAWebBean);
OAViewObject oaviewobject1 =(OAViewObject)am.findViewObject("PosViewHeadersVO");
if (oaviewobject1 != null)
OARow row = (OARow)oaviewobject1.getCurrentRow();
String vCustomType = (String)row.getAttribute("TypeName");
if (vCustomType.equals("Blanket Agreement"))
OAMessageStyledTextBean vHideField = (OAMessageStyledTextBean)paramOAWebBean.findChildRecursive("drbQuantity");
vHideField.setRendered(true);
else
OAMessageStyledTextBean vHideField = (OAMessageStyledTextBean)paramOAWebBean.findChildRecursive("drbQuantity");
vHideField.setRendered(true);
Can anyone help me?
If im grong other solution that i think is:
How I can put a field on a page with code and how to hide the field with conditions?, consider that the field is from the VO extended.
Thanks!!!

Hi Yichao,
Chk these links
https://help.sap.com/saphelp_nw04/helpdata/en/5a/0c889a4d5911d2a5fb0000e82deaaa/content.htm
http://help.sap.com/saphelp_45b/helpdata/en/cf/21ec5d446011d189700000e8322d00/frameset.htm
thanks and regards
srikanth.p

How to hide a field from table maintenance view?

Hi,
How to hide a field from table maintenance view?
The field is used for data created date. I need to hide it from display.
Thanks

Chk this link.
http://help.sap.com/saphelp_nw04/helpdata/en/66/33f52010dd11d6999300508b5d5211/frameset.htm
Maintenance Attributes
You can assign a maintenance attribute P to individual fields in the maintenance view definition in the Dictionary (SE11). It can be H (hidden)
H (hidden)
A field flagged H is not displayed on the screen. This field must also be filled in the background by a routine at an event.
The system writes R and H fields to the database like all other fields when a new data record is saved.

Can we hide the field in Shopping Cart of SRM

Hi..
Can we hide the field in Shopping Cart of SRM??
I have to hide some of the fields from SRM shopping cart screen. is it possible to hide the fields??
Please suggest me
Thanks.
Regards,
Manoj Tiwari

Hy,
For screen variants, just go to transaction SHD0.
The only screen variants available in SRM 4.0 are:
Item data overview in an invoice without purchase order reference: BBP_IV_NON_PO
Item data overview in the invoice with purchase order reference: BBP_IV
Item data overview in the confirmation: BBP_CF
Item data overview in the confirmation for time recording: BBP_CF_TIMEREC
Item data overview in the purchase order: BBP_PO;
Item data overview for contracts: BBP_CTR_ITEMLIST
Item data overview for selection of contracts: BBP_CTR_ITEM_SELLIST
Search results for entering an invoice and/or confirmation: BBP_SEARCH_PO
Search results for entering a purchase order: BBP_SEARCH_SC
Search results for displaying/processing an invoice: BBP_CHANGE_IV
Search results for displaying/processing a confirmation: BBP_CHANGE_CF
Search results for entering/displaying/processing/status of a shopping cart: BBP_SC;
Worklist for Sourcing: BBP_SOCO_WL
Work area in Sourcing: BBP_SOCO_GA
This is very light, and most of the SRM project have to make Templates, or ABAP screens repairs, to Hide/Show fields.
Regards.
Vadim

Problem with hidding Search fields used to pass IDs to the table

Hello,
I have a problem which may be trivial but I cannot find the solution for quite a long time.
Please help
I have created a standard Search Panel with CustomSimpleSearch
I have LOVs to search for manager and organizations. You simply choose the a manager of an organization from the list.
Then I would like to put the values back on the original form
in two fields (in case of manager)
Manager name - visible for users so they know what they selected
Manager ID - to use to search the records in the table I have
SO I have defined mappings and the values are passed and then
the records are found based on Manager ID. The only problem is
I don;t want the ID to be displayed on the screen. I would like to hide this
messageTextInput
but I cannot
I tried setting the following attributes:
Rendered = false -> searching does not work
Secret = true -> searching does not work
Length = 0 - > lenght does not change
How to hide this field so that the ID is passed to it transparently and then the value is used for searching ?
Thank You in advance for Your help
This forum is great
Michael

Use formValue bean instead of messageTextInput. It is used for the very same purpose which you are looking for.
--Shiv

How to hide selection fields when using logical database PNP

hi.
i m using a logical database PNP and report catagory 1PY_DEF in my program.
but when i execute it , it shows to selection box. one name is period and second is selections.
but i just want to show only period box selection fields , not the selection box fields.
how it iz possible.

HI,
In my case i haved used the PNP logical database..in the selection box i don't wnat to display Contorling area,Cost Center & Organizational Unit. i have written this code to hide those fields..
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF screen-name CS 'PNPKOKRS' OR
       screen-name CS 'PNPKOSTL' OR
       screen-name CS 'PNPORGEH'.
      screen-active = '0'.
      screen-invisible = '1'.
      MODIFY SCREEN.
      CLEAR screen.
    ENDIF.
ENDLOOP.
Try modify hide the total block instead of individual fields in that block.

How to hide Incoterms field in CRM Internet Sales/E-Commerce 5.0

Good morning !
        I´m customizing the Web/java part of the CRM E-Commerce 5.0(Internet Sales), and I need to hide the field Incoterms, that is visible in the Order screen, inside the Additional Order Data.
Looking at the page order.jsp(that is the page of the Order screen), I saw that the Incoterms are visible when the method showIncoterms() from class BasketUI returns true, and, seeking for this method, I was found that it belong to class SalesDocumentUI and, at this class, this method returns true when both the methods isBackendR3() and isSoldToChangeable(), returns false.
        The E-Commerce, is connected to CRM, so, the method isBackendR3() will return false, so, I need to found what I need to do to the method isSoldToChangeable() returns false too. Looking in it´s definition, I found that it´s result is get from the method isSoldToSelectable() from the class Shop.
        I think that the method isSoldToSelectable(), will return true or false depending on some parametrization of the CRM, or the webshop, but I´m not finding what the parameter I need to set.
        Done somebody already this ?
        Thank you in advance !
        Wilson

Good Morning !
        I solved this changing the code in the JSP responsible to show the incoterms fields.
        Best regards,
        Wilson

Hide selection fields in SAP PS Report (TCode:S_ALR_87013533)

Dear Friends,
We are implementing EP. In that i have to take one report of PS which tcode is S_ALR_87013533.
In this report having various selection parameters field in 1st screen.But i want only Project defination field to be displayed and remaing fields i wanted to be hide.
So EP user will put only Project Defination and will acess the ps releated report.
What is the way to hide remaing field in that report.Is their any screen layout avail. for the reporting t codes in customizing.
If any other way is avail. pls let me know.
Thanks & Regards,
Sandeep N.Theurkar

Dear Hemant,
Firstly thanks for your helpful answer.
I have created new db profile using tcode optx & given selection criteria proj definition.also i have given plan version "0"
But problem is system is showing following error " No costs, revenues or finances were selected".
Pls tell me how to come out from this problem.
Regards,
Sandeep N.Theurkar

Show/Hide JSF field based on SelectOnceChoice using Model Driven List

Hello All,
I have a use case where I want to show or hide fields based on values populated in SelectOneChoice. I have View master and View Lookup, master has a field named product which displayed selectiononechoice of product name built using lookup view as accessor. I am storing id of lookup type inside product column. Based on a product name say "abc" I want to hide subsequent fields. Can anyone please tell me how to implement this?
I am using ADF 11g version 11.1.2.
Thanks,
Dipal

If I understand you correctly, you are trying to show/hide subsequent fields based on the value selected from a selectonechoice?
Did you try using partial triggers and EL for setting the rendered attribute on subsequent fields and setting autosubmit to true on selectonechoice?
Kristjan

How to hide two fields in SharePoint list when a dropdown value selected?

Hi all,
I have a SharePoint list which have four columns 1 Title 2.Type (Dropdown: option1:Issues Option2:Risk) 3.Risk Name and 4.Risk type. If 'type' value is 'Issues' then I need to hide field 3 and 4. In other words, default value in dropdown should be 'Issue'
and want to hide field 3 and 4 are onload without using InfoPath.
How to achieve this? Thanks in advance!

You can make use of jquery for the same. Add script editor webpart on the page and access the dropdown value and based on the value you get, show or hide the fields. Below are some pointers.
http://sachinvkatkar.blogspot.in/2013/02/hide-fields-from-sharepoint-newform.html
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/50aa6f8d-f742-4400-82f3-7949ab1c215e/need-help-manipulating-form-fieldsrows-using-jquery?forum=sharepointdevelopmentprevious#802d9d4d-c19b-4752-a4fb-e38f40f50c51
http://social.technet.microsoft.com/wiki/contents/articles/21730.sharepoint-2010-conditionally-hide-fields-on-standard-list-forms-using-jquery.aspx
http://sharepointnadeem.blogspot.in/2013/09/sharepoint-showhide-list-column-based.html
Geetanjali Arora | My blogs |

Hide SSN Field

Similar Messages

Maybe you are looking for