Hide SSN Number in 0employee_attr

Hi,
       I want to hide SSN Number in the extractor "0employee_attr". have tried RSO2 to eddit the data source, but I get the message which says " 0EMPLOYEE_ATTR is extracted using functional module HR_BIW_GET_MASTER_DATA" and it does not allow me to edit the data source. Any idea how I can address this issue...

Go to RSA6 transaction and edit the datasoruce over there...
You can hide the field there and save.
RSO2 transaction is used only for generic datasources it cant be used for standard ones.
Edited by: mansi dandavate on Aug 14, 2009 6:58 AM

Similar Messages

  • Hide "my number" doesn't work

    I got a new 8900 replacement (under warranty) and I know this worked on my old phone but somehow it's not working on this new one.
    Inside the Call log, menu >> options>>general options>>
    Show "My Number " = NO
    But my number still shows up whenever i'm making a phone call.
    I tried turn off and on. Battery pull too.  Double checked after battery pull, and it is "NO"...
    Help?
    Thanks.

    the show my number option is whether you want to see your number on the call screen, when you dial a number it shows your number, that's all that does. I'm not 100% sure how to hide your number but it might be the "restrict my identity" option on the same menu

  • Field For SSn number

    Hi All,
    Can anybody please tell me the field for SSN number.And in whcih table it will stored.
    I have srached in PA002 but it is not avaliable.
    Can anybody help me.
    Thanks,

    Hi,
    This field is applicable to US. You would find this in IT0002-Pesonal Data. If the country grouping is 10, you would automatically get this field in IT0002.
    Regards,
    Suhasini

  • How to hide a number on cucm 8.5

    Hi guys,
    I'd like to know how to hide the number of the caller on cucm 8.5
    I'm not a pro, could someone explain to me step by step please
    Thank you for ur time
    Regards

    OK, if you want to change this for all calls simply adjust "Calling Line ID Presentation" to RESTRICTED on
    all Route Patterns pointing to PSTN. If you want to do this only for some users you will need to copy all the route patterns and assign them different partition reachable from that phone.
    If you want it to work on demend, i.e users dial *67 followed by the number to block caller ID, copy the existing route patterns and add *67 to the front and set this "Calling Line ID Presentation" to RESTRICTED.
    HTH, please rate all useful posts!
    Chris

  • How to mask SSN number in Identification Number field in BP?

    Hello Gurus,
    We have a requirement to mask the initial 5 digits of SSN number when displayed in the Identification Number field in the Identification tab of BP transaction. What is the best way to go ahead with this enhancement?
    We do not want to encrypt the data at the database level. Just encrypt at while displaying SSN Number on BP transaction.
    If anyone has carried out such enhancement, would appreciate if you can share how you did it?
    Thanks to all in advance,
    Shyamak

    Shyamak,
    This is for CRM -
    Go the PBO of the screen that has identification details. In a suitable PBO module, you can implement and implicit enhancement point and change the data in internal table.
    In my system it is function group BUD0. It would be same in yours as well. Screen is 1520 for me, it may be something else for you. I would have done in module - 'pbo_1520'. Do it at the end of this module. Internal table name GT_BUT0ID
    You need to so something similar in ECC
    Cheers
    Niraj

  • Hide SSN Field

    HI Folks,
    How do we lock/hide SSN field to a ceratin user group in the PA30 and PA40 screens with out doing config chnages. Is there anything a security consultant can do? Please advise.

    One option is to use screen variants.
    <a href="http://help.sap.com/saphelp_47x200/helpdata/en/7d/f63a0d015111d396480000e82de14a/frameset.htm">Look at the SAP Help pages</a>
    Good luck
    //freppe

  • Regarding SSN Number in Personal data

    Hi All,
    In ESS, if we change the SSN number of an employee in the Personal Data, it is not getting reflected in the SAP R/3 data and the SSN Number is reset to Space.
    Did anyone experienced the same problem, if yes can you please suggest the solution for the same.
    Thanks in advance,
    Shashi,

    Bharat can you please be more detail. Am also facing the same problem. Its odd. Problem with just the SSN number of the Peronal ldata screen. When we update the SSN value from front end, its gone, its not getting reflectedand even the old numbe rs gone. Suprised how it is possible since SSN is a mondatory field and how could it save through BAPI or RFC without a mandatory field. I guess it shold be a problem with the underlying RFC func that is used to update data into the infotypes. Any suggestions???
    Sam

  • How to hide page number in the table of content

    Hi,
    I'd like to know how to hide page number in the ToC. They show automatically, but at least for the headings of third ad fourth order I'd like to suppress/omit them.
    Thanks for any advice!

    You have in the Inpspector > Document tab > TOC > uncheck button for #'s

  • How can I hide the number of unread eMails on my mail-symbol in my dock?

    Hello,
    I don't want to be disturbed while I am working so I am trying to hide the number of unread mails in my dock-symbol. I remember, that - some years ago - I could switch my preferences to not show any mails in my dock, but with the new Lion, I can just select wether I want to show all the unread mails or just the unread mails listet in my inbox.
    Any suggestions, how I can hide the number of unread eMail in my dock?
    Thanks a lot in advance
    Eike

    If you go to Settings>Notification Centre>Mail each of your email accounts will appear here separately. You can then change if Badges are displaye on the Mail App - which will show you the number of emails - or not.
    Regards,
    Steve

  • I erg my final cut express with apple, my computer is askingfor final cut ssn number after a year, i don't have the box. how do I get it from apple me

    How do i get my ssn number from apple for my final cut express, I installed it almost a year ago.  now its asking for the ssn and I don't have the box.
    Koby

    Read this: http://support.apple.com/kb/HT1861

  • Converting SSN Number

    can anybody tell me the logic to convert ssn number
    421-64-8951 to 421648951 .Plz answer urgently,points will be awarded undoubtedly.

    u can use REPLACE statement
    DATA :  TEST1(11) type C VALUE '421-64-8951'.
    REPLACE ALL OCCURRENCES OF '-' IN  TEST1 WITH ''.
    *Note : its two times single qoute at last in above statement without any space between quotes
    OR
    USE CONCATENATE with Offset settings...
    See below code
    DATA:TEST1(11) type C VALUE '421-64-8951',
    TEST2(3) type c,
    TEST3(2) type c,
    TEST4(6) type c,
    TEST5(9) TYPE C.
    move test1+0(3) to test2.
    move test1+4(2) to test3.
    move test1+7(6) to test4.
    concatenate test2 test3 test4 into test5.
    write:/ test5.
    Hope it will solve your problem..
    Thanks & Regards
    ilesh 24x7

  • SSN number masking in SWIA transaaction

    Hi,
    The requirement Is to mask the SSN number in SWIA transaction,
    I would like to know how achieve it.
    Note: There are no Enhancements available, its 4.7 so no enhancement framework is also not available.
    Thanks in advance,
    Praveen

    You can use the following GuiXT script to mask that particular block
    del G[Selection Using Work Item ID]
    Kanagaraja L

  • Hide bank number field from all transaction code

    Hi ABAP Gurus,
    we have requirement to hide bank number from all sap transaction codes in display mode only.
    Is there any way we can do it through configuration .
    Thanks,
    Troy,

    On 13 Dec 2006 in macromedia.dreamweaver.appdev, AdonaiEchad
    wrote:
    > How do I do that? I can only change what is on the page
    not the
    > mysql tables on the mysql server.
    Set '3' as the default value for the MySQL field, and don't
    do anything
    with it on the insert
    Joe Makowiec
    http://makowiec.net/
    Email:
    http://makowiec.net/email.php

  • Hide my number

    My Galaxy Samsung Note 4 does not have the option to hide my number.  I have watched tutorials and followed each step but there is no call settings and hide number option.

    It should pop up as an Anonymous Caller when using the feature b

  • If you block a mobile number, can they hide their number and get thru to your phone showing 'no caller id', If you block a mobile number, can they hide their number and get thru to your phone showing 'no caller id'

    I have blocked a number, but can this person still get through to my phone if they hide their mobile number?

    Hi, I was having the same issue, I have many numbers blocked but when then choose to hide their number the Phone would ring.
    I have since found a solution.
    Settings
    Do Not Disturb
    Manual
    Allow Calls From - All Contacts
    With Do Not Disturb on all the time, only people in your contacts can contact you, and all the people you have in your Blocked lists still stay blocked.
    Just be careful when you have your phone on silent, this will stop all notifications coming through, including text alerts etc.
    But for me its either this or change my number which i really cant be bothered to do
    Hope this helps
    Cheers

Maybe you are looking for