Hide SUbscreen depending on Radio buttons

i have 2 radio buttons in one screen. and a subscreen in another screen.
i need to hide this subscreen depending on which radiobutton is being selected.
my code is as follows :
PROCESS BEFORE OUTPUT.
MODULE STATUS_0010.
CALL SUBSCREEN SUB1 INCLUDING SY-REPID '100'.
PROCESS AFTER INPUT.
MODULE EXIT_0009 AT EXIT-COMMAND.
FIELD: WA_PRINT-EXIDV MODULE VAL_EXIDV ON REQUEST.
CALL SUBSCREEN SUB1.
MODULE USER_COMMAND_0010.

Hi,
Check the bellow link for your requirement.
how to hide subscreen in module pool
Regards,
Goutam Kolluru.

Similar Messages

How to hide Approve and reject radio buttons at item level.

Hi All,
On the HOME screen of EBP click Approval link ---> Under Appoval tab under Action Column click the magnifying glass icon ---> a table is displayed with Approve and Reject as two columns which contain radio buttons at item level .
How can we hide these two columns and the radio buttons?
Thanks & Regards,
Anubhav

Hi Daniel,
As you said the template bbp sc ui its 120 is to be modified, i also located the code to be changed but when i comment the code for displaying the RBs , i get "Syntax Error in Tempate" dump in IE.

                      `if (gt_scr_itmovr_i-DEDUCT_IND[j].disabled)`
                          `if (gt_scr_itmovr_i-DEDUCT_IND[j] != "X")`
                              `TD(align="center",valign="middle", class=tdcellclass)`
                                 <img src="`mimeURL(~service="bbpglobal",~language="", ~name="images/icon/checkedradio.gif")`" border="0">
                              `TD(align="center",valign="middle", class=tdcellclass)`
                                 <img src="`mimeURL(~service="bbpglobal",~language="", ~name="images/icon/uncheckedradio.gif")`" border="0">
                          `else`
                              `TD(align="center",valign="middle", class=tdcellclass)`
                                 <img src="`mimeURL(~service="bbpglobal",~language="", ~name="images/icon/uncheckedradio.gif")`" border="0">
                              `TD(align="center",valign="middle", class=tdcellclass)`
                                 <img src="`mimeURL(~service="bbpglobal",~language="", ~name="images/icon/checkedradio.gif")`" border="0">
                          `end`
                      `else`
                          `TD(align="center",valign="middle", class=tdcellclass)`
                             <input type="RADIO" name="gt_scr_itmovr_i-DEDUCT_IND[`j`]" value="" `if (gt_scr_itmovr_i-DEDUCT_IND[j] != "X")` CHECKED `end;
                             if ( group_hierarchy_position > -1 ); 
                               if ( group_hierarchy_position != j ); 
                                   `on click="jav asc ript:toggleSu bItemApprovalState(`j`)";`
                                 group_last_subitem_position = j;
                               else; 
                                 if (GT_SCR_ITMOVR_I-HIER_EXPANDED[j] == "X");
                                   `on click="java scr ipt:setAppro valStateAllSubItems(true, `j`)";`
                                 end;
                                 group_last_subitem_position = j;
                               end;
                             end`>
                          `TD(align="center",valign="middle", class=tdcellclass)`
                             <input type="RADIO" NAME="gt_scr_itmovr_i-DEDUCT_IND[`j`]" value="X" `if (gt_scr_itmovr_i-DEDUCT_IND[j] == "X")` CHECKED `end;
                             if ( group_hierarchy_position > -1 ); 
                               if ( group_hierarchy_position != j ); 
                                 `on click="javas cript:tog gleSubItemApprovalState(`j`)";`
                                 group_last_subitem_position = j;
                               else; 
                                 if (GT_SCR_ITMOVR_I-HIER_EXPANDED[j] == "X");
                                   `on cli ck="javas cript:setApprovalStateAllSubItems(false, `j`)";`
                                 end;
                                 group_last_subitem_position = j;
                               end;
                             end`>
                      `end;
                   end;
               end`
I guess the above mentioned code has to be modified but how?
Thanks a lot,
Anubhav

Select first node in train depending on Radio Buttons

I followed the document http://www.oracle.com/technetwork/developer-tools/adf/learnmore/82-programmatically-navigate-trains-396873.pdf
to programmatically navigate ADF train
now i want to select the first node in the train depending on the selected Radio Button
let us say that i have two radio button "manual", "automatic"
and i have train consist of 5 nodes
if I select "manual" then the first node in the train will be node number 1
if Is select "Automatic" the node number 3 will be the first node

I found this example http://adfpractice-fedor.blogspot.com/2011/05/dynamic-train-adding-train-stops.html
I download it and try to run it but it doesn't compile cause missing packages
these packages are
oracle.adfinternal.controller.train.TrainStopModel;
oracle.adfinternal.controller.train.TrainUtils;
oracle.adf.controller.internal.metadata.TrainStopContainer
and many others from the same package oracle.adfinternal.controller.train and oracle.adf.controller.internal.metadata
I googled for these packages and found that they r exist in jar called adf-pageflow-impl.jar
I founded two jar one called adf-pageflow-impl.jar and the other oracle.adf-pageflow-impl.jar on my version of jdeveloper 11g R2
i added them to my class path but the problem is still exist

Display Hide screen elements on radio button select

Hi all,
We have requirement to display some elements if radio button 1 is selected and display others elements if radio button 2 is selected .
All elements should display/hide on radio button click not on any other button .
<REMOVED BY MODERATOR>
Regards,
Edited by: Alvaro Tejada Galindo on Jun 12, 2008 5:34 PM

Hi,
Refer the code below:
*Radiobuttons for selecting single material or range of BOM components
SELECTION-SCREEN:BEGIN OF BLOCK b1 WITH FRAME TITLE text-001 .
*Radiobutton for selecting material
PARAMETERS:rb_mat RADIOBUTTON GROUP g1 DEFAULT 'X' USER-COMMAND com1.
*Radiobutton for selecting BOM components
PARAMETERS:rb_comp RADIOBUTTON GROUP g1.
SELECTION-SCREEN END OF BLOCK b1.
*Enter BOM header and details
SELECTION-SCREEN BEGIN OF BLOCK sub1 WITH FRAME TITLE text-002.
PARAMETERS:p_matnr TYPE mara-matnr MODIF ID id1.                 "Material Number
PARAMETERS:p_werks TYPE marc-werks MODIF ID id1.                 "Plant
PARAMETERS:p_stlan TYPE mast-stlan MODIF ID id1.                 "BOM usage
PARAMETERS:p_stlal TYPE mast-stlal MODIF ID id1.                 "Alternative BOM
PARAMETERS:p_capid TYPE rc29l-capid MODIF ID id1.                "BOM Application
SELECTION-SCREEN END OF BLOCK sub1.
*Enter BOM components
SELECTION-SCREEN BEGIN OF BLOCK sub2 WITH FRAME TITLE text-003.
SELECT-OPTIONS:s_matnr FOR marc-matnr MODIF ID id2.              "Material Number(BOM component)
SELECTION-SCREEN END OF BLOCK sub2.
*Enter document details
SELECTION-SCREEN BEGIN OF BLOCK sub3 WITH FRAME TITLE text-004.
*Document number
PARAMETERS:p_doknr TYPE draw-doknr.
*Document Type
PARAMETERS:p_dokar TYPE draw-dokar.
*Document Part
PARAMETERS:p_doktl TYPE draw-doktl DEFAULT '000'.
*Document Version
PARAMETERS:p_dokvr TYPE draw-dokvr DEFAULT '00'.
SELECTION-SCREEN END OF BLOCK sub3.
*Display screen based on selection of radio button
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF rb_mat = 'X'.
      IF screen-group1 = 'ID2'.
        screen-active = 0.
      ENDIF.
    ELSEIF rb_comp = 'X'.
      IF screen-group1 = 'ID1'.
        screen-active = 0.
      ENDIF.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP.

Report should executed based on the radio buttons on the selection screen

Hi everyone,
Greets....................
My scenario is I have 2 selection screen blocks on same screen..
One selection screen block contains input parameters as follows
Company Code - S_BUKRS
Business Area - S_GSBER
Customer Code - S_KUNNR
Fiscal Area -   S_GJAHR
GL Account - S_HKONT
Posting Date -S_ZFBDT
Ledger Type -P_RLDNR
Open Item Key Date - P_ZFBDT
Another selection screen block contains 2 radio buttons with the option as follows
Collection Plan
*Credit days summary.
If i click Collection plan the report output should come based on the input parameters in first selection-screen block.
If i click Credit days summary the report output should come based on the input parameters in first selection-screen block.
Pls send me the sample code for this.
Thanks in Advance
Regards
Raj kumar

See the below folling example : it will have radio buttons and depends on radio button it will show output.
REPORT ZPPR_BOM_INFOL_REPORT no standard page heading
                 line-size 160
                 line-count 60.
======================================================================
Program Name : ZPPR_BOM_INFOL_REPORT
Description : This Program would be used for BOM List for a material*
               and the component's where used list                   *
Author       : Seshu                                                 *
Date         : 07/24/2006                                            *
MODIFICATION HISTORY                                                 *
DATE    | AUTHOR   | CHANGE #   | DESCRIPTION OF MODIFICATION        *
|----
|----
|----
*12/04/06 | Seshu    | DEVK921821 | Removed new page for each material *
======================================================================
Table definition                                                    *
TABLES: mast,
        stko,
        stpo,
        T418,
        makt.
TYPE - POOLS
TYPE-POOLS: slis.
Constants
constants : c_tcode(4) type c value 'CS03',
            gc_formname_top_of_page TYPE slis_formname
            VALUE 'TOP_OF_PAGE'.
Variables
data : v_maktx like makt-maktx,
       wa_stko like stko.
DATA:
Objekttyp 'Material'
   otyp_mat(1) TYPE c VALUE '1',
   ootyp_mat(1) TYPE c VALUE 'M',
Objekttyp 'kein Objekt'
   otyp_noo(1) TYPE c VALUE '2',
Objekttyp 'Dokument'
   otyp_doc(1) TYPE c VALUE '3',
Objekttyp 'Klasse'
   otyp_kla(1) TYPE c VALUE '4',
Objekttyp 'Intramaterial'
   otyp_ntm(1) TYPE c VALUE '5'.
maximal anzeigbare Menge
data:   max_num(7) TYPE p DECIMALS 3 VALUE '9999999999.999',
        ueberl_kz(1) TYPE c VALUE '*',
        min_num(7) TYPE p DECIMALS 3 VALUE '9999999999.999-',
        b_flag(1) TYPE c VALUE 'X',
        ecfld(250) TYPE c,
        v_flag type c.
ALV Variables
DATA: gt_fieldcat TYPE slis_t_fieldcat_alv,
      gs_layout   TYPE slis_layout_alv,
      gs_keyinfo TYPE slis_keyinfo_alv,
      gt_sp_group TYPE slis_t_sp_group_alv,
      gt_events   TYPE slis_t_event.
DATA: g_repid LIKE sy-repid.
DATA: gt_list_top_of_page TYPE slis_t_listheader,
            g_tabname_header TYPE slis_tabname,
            g_tabname_item   TYPE slis_tabname,
            g_save(1) TYPE c,
            gx_variant LIKE disvariant,
            g_variant LIKE disvariant,
            g_default(1) TYPE c,
            g_exit(1) TYPE c.
Includes                                                             *
INCLUDE .
Internal Table Declaration                                           *
DATA: t_mast LIKE STANDARD TABLE OF mast WITH HEADER LINE.
*DATA: t_makt LIKE STANDARD TABLE OF makt WITH HEADER LINE.
BOM Function module Related
DATA: t_matcat LIKE cscmat OCCURS 0 WITH HEADER LINE.
Internal Table for Level by Level Function module
DATA: t_stb LIKE stpox OCCURS 0 WITH HEADER LINE.
Get the Relevant data from FM
DATA: BEGIN OF hd_tab OCCURS 0,
         stufe LIKE stpox-stufe,
         vwegx LIKE stpox-vwegx,
      END OF hd_tab.
Final Output
DATA: BEGIN OF alv_stb OCCURS 0.
        INCLUDE STRUCTURE stpox_alv.
DATA:   info(3)   TYPE c,
      END OF alv_stb.
DATA: BEGIN OF stb_orig.
        INCLUDE STRUCTURE stpox.
DATA: END OF stb_orig.
DATA: BEGIN OF stb_add.
        INCLUDE STRUCTURE stpol_add.
DATA: END OF stb_add.
Internal Table for STPO
*-- BOM Line item
TYPES: BEGIN OF ty_stpo,
       stlty TYPE stpo-stlty,
       stlnr TYPE stpo-stlnr,
       stlkn TYPE stpo-stlkn,
       stpoz TYPE stpo-stpoz,
       idnrk TYPE stpo-idnrk,
       meins TYPE stpo-meins,
       menge TYPE stpo-menge, "Component Qty
       END OF ty_stpo.
DATA: t_stpo TYPE STANDARD TABLE OF ty_stpo WITH HEADER LINE.
*-- BOM Header
TYPES: BEGIN OF ty_stko,
       stlty TYPE stko-stlty,
       stlnr TYPE stko-stlnr,
       stlal TYPE stko-stlal,
       stkoz TYPE stko-stkoz,
       bmein TYPE stko-bmein,
       bmeng TYPE stko-bmeng,
       END OF ty_stko.
DATA: t_stko TYPE STANDARD TABLE OF ty_stko WITH HEADER LINE .
data : t_makt like makt occurs 0 with header line.
DATA: BEGIN OF cl_clstab OCCURS 0,                          "YHG079407
         class LIKE klah-class,                             "YHG079407
         klart LIKE klah-klart,                             "YHG079407
         chked LIKE csdata-xfeld,                           "YHG079407
         noobj LIKE csdata-xfeld,                           "YHG079407
         dsply LIKE csdata-xfeld,                           "YHG079407
      END OF cl_clstab.
*-- Header table
TYPES: BEGIN OF ty_main_material,
       matnr TYPE mast-matnr, "Material
       werks TYPE mast-werks, "Plant
       maktx TYPE makt-maktx, "Description
       stlal TYPE mast-stlal, "Alternative BOM
       stlnr TYPE stko-stlnr, "BOM Number
       bmein TYPE stko-bmein, "UOM
       bmeng TYPE stko-bmeng, "Base Qty
       expand(1) TYPE c,      "Expanding Field
       END OF ty_main_material.
DATA: t_main_material TYPE STANDARD TABLE OF ty_main_material WITH
      HEADER LINE.
*-- Item (Component) Table
TYPES: BEGIN OF ty_item_material,
       matnr TYPE mast-matnr, "Material
       werks TYPE mast-werks, "Plant
       idnrk TYPE stpo-idnrk, "Component (Material)
       maktx TYPE makt-maktx, "Description
       stlal TYPE mast-stlal, "Alternative BOM
       stlnr TYPE stpo-stlnr, "BOM Number
       meins TYPE stpo-meins, "UOM
       menge TYPE stpo-menge, "Base Qty
       END OF ty_item_material.
DATA: t_item_material TYPE STANDARD TABLE OF ty_item_material WITH
      HEADER LINE.
Selection Screen                                                     *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_werks LIKE marc-werks DEFAULT '1000' OBLIGATORY.
SELECT-OPTIONS s_stlal FOR mast-stlal .
SELECT-OPTIONS s_stlan FOR mast-stlan DEFAULT '1'.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
SELECTION-SCREEN SKIP.
PARAMETERS: p_bomlst RADIOBUTTON GROUP g1 DEFAULT 'X'.
SELECT-OPTIONS s_matnr FOR mast-matnr.
SELECTION-SCREEN SKIP.
PARAMETERS: p_compon RADIOBUTTON GROUP g1.
SELECT-OPTIONS: s_idnrk FOR stpo-idnrk.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN END OF BLOCK b1.
selection-screen begin of block b03 with frame title text-b03.
selection-screen begin of line.
selection-screen comment 1(40) text-005.
parameters: p_all radiobutton group r1 default 'X'.
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 1(40) text-006.
parameters: p_one radiobutton group r1 .
selection-screen end of line.
selection-screen end of block b03.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETERS: p_vari LIKE disvariant-variant.
SELECTION-SCREEN END OF BLOCK b3.
At slection screen events                                            *
*-- Process on value request
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
PERFORM f4_for_variant.
Intitialisation
INITIALIZATION.
g_repid = sy-repid.
g_tabname_header = 'T_MAIN_MATERIAL'.
g_tabname_item   = 'T_ITEM_MATERIAL'.
*-- define keyinformation
CLEAR gs_keyinfo.
gs_keyinfo-header01 = 'MATNR'.
gs_keyinfo-item01   = 'MATNR'.
PERFORM e03_eventtab_build USING gt_events[].
PERFORM e04_comment_build USING gt_list_top_of_page[].
PERFORM e07_sp_group_build USING gt_sp_group[].
PERFORM e08_layout_build   USING gs_layout.
Set Options: save variants userspecific or general
g_save = 'A'.
PERFORM variant_init.
Get default variant
gx_variant = g_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
       EXPORTING
            i_save     = g_save
       CHANGING
            cs_variant = gx_variant
       EXCEPTIONS
            not_found = 2.
IF sy-subrc = 0.
    p_vari = gx_variant-variant.
ENDIF.
S T A R T - O F - S E L E C T I O N *******************
start-of-selection.
if p_all = 'X'.
Get the data from MAST and MAKT Table
    if p_bomlst = 'X'.
Get the data Based On Material #
      perform get_data.
    else.
Get the data Based On Component
      perform get_data_component.
    endif.
else.
Get the Single Level Report
*-- Moved the fiedl catalog here inorder to change the layout based on
*-- Selection
    PERFORM e01_fieldcat_init USING gt_fieldcat[].
    PERFORM select_data.
endif.
E N D - O F - S E L E C T I O N *******************
end-of-selection.
if p_one = 'X'.
    perform alv.
endif.
User Command
at line-selection.
Interactive to CS03 Transaction
case sy-ucomm.
    when 'PICK' or 'F2'.
      if not alv_stb-idnrk is initial .
        if not alv_stb-werks is initial.
          if not alv_stb-objty is initial.
            SET PARAMETER ID 'MAT' FIELD alv_stb-idnrk.
            SET PARAMETER ID 'WRK' FIELD alv_stb-werks.
            SET PARAMETER ID 'CSV' FIELD alv_stb-OBJTY.
            call transaction c_tcode and skip first screen.
          endif.
        endif.
      endif.
      clear alv_stb.
endcase.
*&      Form get_data
      Get data from MAST and MAKT Table
FORM get_data.
data : wa_lines type sy-index.
REFRESH : T_MAST,
            t_STB,
            t_MATCAT,
            alv_STB.
CLEAR : T_MAST,
            t_STB,
            t_MATCAT,
            alv_STB.
Get the data from MAST Table
Get all the information from MAST - BOM Table
SELECT * FROM mast INTO TABLE t_mast WHERE matnr IN s_matnr AND
                                             werks = p_werks AND
                                             stlan IN s_stlan AND
                                             stlal IN s_stlal.
describe table t_mast lines wa_lines.
if wa_lines is initial.
    Write:/2 'List contains no data'.
    stop.
endif.
loop at t_mast.
    clear : v_maktx.
Start of change Seshu
Reason - Remove the new page option
    if sy-tabix ne 1.
      skip 1.
    endif.
End of Change Seshu
Get the material Description
    select single maktx from makt into v_maktx
                             where matnr = t_mast-matnr
                             and   spras = 'E'.
Get the material details from STKO Table
    select single * from stko into wa_stko
                    where STLTY = 'M'
                    and   STLNR = t_mast-stlnr
                    and   STLAL = t_mast-stlal.
Main Header for Each Material
    format color 5 on.
    write:/2 'Material',20 'Material Description',65 'Alternative BOM',
         90 'Base Qty', 115 'Base Unit'.
    format color 5 off.
    format color 1 on.
    write:/2 t_mast-matnr,20 v_maktx,65 wa_stko-STLAL, 85 wa_stko-BMENG,
           115 wa_stko-BMEIN.
    format color 1 off.
Use the Function Module and get the format level by level
    perform get_level_level.
endloop.
ENDFORM.                    " get_data
Top of page                                                  *
top-of-page.
perform report_header .
*&      Form report_header
      text
--> p1        text
<-- p2        text
FORM report_header.
new-page line-size 160 .
format color col_heading intensified on.
write:/ sy-uline(160) .
*--- Write Company Name.
perform calc_col_and_write using    text-h00
                                      sy-linsz.
*--- Write Report Title.
perform calc_col_and_write using    sy-title
                                      sy-linsz.
*--- Write User Id, Date / Time, Program Id, Page etc.
perform write_other_hdr_details.
write:/ sy-uline(160) .
ENDFORM.                    " report_header
*&      Form calc_col_and_write
      text
     -->P_TEXT_H00 text
     -->P_SY_LINSZ text
FORM calc_col_and_write USING    P_TEXT
                                 P_LINSZ.
data: col1 type i,
         col2 type i,
          len type i,
          str type i.
str = strlen( p_text ).
col1 = ( p_linsz / 2 ) - ( str / 2 ) .
len = p_linsz - col1 - 2.
write: at /1 '|'.
write: at col1 p_text,
         at sy-colno(len) space.
write at 160 '|'.
ENDFORM.                    " calc_col_and_write
*&      Form write_other_hdr_details
      text
--> p1        text
<-- p2        text
FORM write_other_hdr_details.
data: col1 type i,
          col2 type i,
          len type i.
col1 = 3.
write:/1 '|'.
write: at col1 'UserId : ',
                  sy-uname.
len = sy-linsz - 1.
write at sy-colno(len) space.
col2 = sy-linsz - 18.
write: at col2 'Date: ',
                 sy-datum mm/dd/yyyy.
write: at sy-linsz '|'.
write:/1 '|'.
write: at col1 'ReportId: ',
                  sy-repid.
write at sy-colno(len) space.
col2 = sy-linsz - 18.
write: at col2 'Page: ',
                  sy-pagno.
write: at sy-linsz '|'.
ENDFORM.                    " write_other_hdr_details
*&      Form get_data_component
      Get the data based on Component level
FORM get_data_component.
data wa_lines type i.
*-- Get the BOM item details
SELECT stlty stlnr stlkn stpoz idnrk meins menge
          FROM stpo
          INTO TABLE t_stpo
WHERE   idnrk IN s_idnrk.
IF sy-subrc = 0.
    CLEAR wa_lines.
    DESCRIBE TABLE t_stpo LINES wa_lines.
    IF wa_lines > 0.
      SELECT stlty stlnr stlal stkoz bmein bmeng
              FROM stko
              INTO TABLE t_stko
              FOR ALL ENTRIES IN t_stpo
      WHERE stlnr = t_stpo-stlnr.
      CLEAR wa_lines.
      DELETE ADJACENT DUPLICATES FROM t_stko COMPARING ALL FIELDS.
      DESCRIBE TABLE t_stko LINES wa_lines.
      IF wa_lines > 0.
*-- Get the BOM item details
        SELECT * FROM mast INTO TABLE t_mast FOR ALL ENTRIES IN t_stko
                                            WHERE werks = p_werks AND
                                              stlnr = t_stko-stlnr
                                              and stlal in s_stlal.
      ENDIF.
    ENDIF.
else.
    Write:/2 'List contains no data'.
    stop.
endif.
loop at t_mast.
    clear : v_maktx.
Start of change Seshu
Reason - Remove the new page option
    if sy-tabix ne 1.
      skip 1.
    endif.
End of change    Seshu
Get the material Description
    select single maktx from makt into v_maktx
                             where matnr = t_mast-matnr
                             and   spras = 'E'.
Get the material details from STKO Table
    select single * from stko into wa_stko
                    where STLTY = 'M'
                    and   STLNR = t_mast-stlnr
                    and   STLAL = t_mast-stlal.
Main Header for Each Material
    format color 5 on.
    write:/2 'Material',20 'Material Description',65 'Alternative BOM',
         90 'Base Qty', 115 'Base Unit'.
    format color 5 off.
    format color 1 on.
    write:/2 t_mast-matnr,20 v_maktx,65 wa_stko-STLAL, 85 wa_stko-BMENG,
           115 wa_stko-BMEIN.
    format color 1 off.
Use the Function Module and get the format level by level
    perform get_level_level.
    clear : t_mast.
endloop.
ENDFORM.                    " get_data_component
*&      Form obj_ident
      text
FORM obj_ident.
weder Mat noch Doc
CHECK: T_stb-objty NE otyp_mat,
         T_stb-objty NE ootyp_mat,
         T_stb-objty NE otyp_doc,
         T_stb-objty NE otyp_ntm.
?T418-WA schon ok
nein
IF T_stb-postp NE t418-postp.
    T418 einlesen
    PERFORM t418_lesen USING T_stb-postp.
ENDIF.
PERFORM cl_clstab_maint.
?MatNr-Eingabe bei diesem PosTyp moeglich
und keine Textposition
trifft zu
IF     t418-matin NE '-'
     AND t418-txpos IS INITIAL.
    aktuelles Objekt ist Material NLAG
    T_stb-objty = '1'.
    PosKurztext in ObjKurztext uebernehmen.
    T_stb-ojtxp = T_stb-potx1.
    MODIFY T_stb.
ELSE.
    IF T_stb-objty IS INITIAL.
      T_stb-objty = '2'.
      MODIFY T_stb.
    ENDIF.
ENDIF.
ENDFORM.                    " obj_ident
*&      Form t418_lesen
      text
     -->P_T_STB_POSTP text
FORM t418_lesen USING   lkl_postp LIKE stpo-postp.
T418-WA initialisieren
CLEAR:
     t418.
Key angeben
t418-postp = lkl_postp.
PosTypDefinition lesen
READ TABLE t418.
ENDFORM.                    " t418_lesen
*&      Form cl_clstab_maint
      text
FORM cl_clstab_maint.
nur fuer Klassenpositionen
CHECK t_STB-OBJTY EQ OTYP_KLA.
Teilkey der Klassenpositionentabelle
CL_CLSTAB-CLASS = t_STB-CLASS.
CL_CLSTAB-KLART = t_STB-KLART.
Klassenpositionentabelle lesen
READ TABLE CL_CLSTAB
     WITH KEY CL_CLSTAB(21)
     BINARY SEARCH.
aktuelle Klassenposition bereits in Klassenpositionentabelle
nein
IF SY-SUBRC <> 0.
    Klassenposition in Klassenpositionentabelle hinzufuegen
    INSERT CL_CLSTAB INDEX SY-TABIX.
ENDIF.
ENDFORM.                    " cl_clstab_maint
*&      Form alv_stb_prep
      Printing the data as LEVEL BY LEVEL
FORM alv_stb_prep.
CLEAR:
      alv_stb,
      stb_orig,
      stb_add.
IF t_stb-hdnfo IS INITIAL.
    stb_orig = t_stb.
    IF t_stb-mngko >= max_num.
      stb_add-ovfls = ueberl_kz.
    ELSE.
      IF t_stb-mngko <= min_num.
        stb_add-ovfls = ueberl_kz.
      ELSE.
        CLEAR: stb_add-ovfls.
      ENDIF.
    ENDIF.
    IF NOT t_stb-xtlnr IS INITIAL.
      stb_add-bomfl = b_flag.
    ENDIF.
    IF    NOT t_stb-knobj IS INITIAL
       OR NOT t_stb-class IS INITIAL
       OR NOT t_stb-kzclb IS INITIAL.
      stb_add-knofl = 'X'.
    ENDIF.
ELSE.
    CHECK t_stb-stufe > 1.
    alv_stb-info = 'C30'.
    IF t_stb-ttidx <> t_matcat-index.
      READ TABLE t_matcat INDEX t_stb-ttidx.
    ENDIF.
    stb_orig-hdnfo = t_stb-hdnfo.
    stb_orig-stufe = t_stb-stufe - 1 .
    stb_orig-ojtxp = t_stb-ojtxb.
    IF NOT t_stb-altst IS INITIAL.
      stb_orig-stlal = t_stb-stlal.
      IF stb_orig-stlal(1) EQ '0'.
        stb_orig-stlal(1) = ' '.
      ENDIF.
    ENDIF.
    stb_orig-idnrk = t_matcat-matnr.
ENDIF.
CLEAR:
    stb_add-dobjt,
    stb_add-objic.
CASE t_stb-objty.
    WHEN otyp_mat.
      WRITE: stb_orig-idnrk TO ecfld.
      stb_add-objic = '@A6@'.
    WHEN 'M'.
      WRITE: stb_orig-idnrk TO ecfld.
      stb_add-objic = '@A6@'.
    WHEN otyp_noo.
      WRITE: stb_orig-potx1 TO ecfld.
      stb_add-objic = '@0Q@'.
    WHEN otyp_doc.
      write stb_orig-doknr to ecfld.                        "note 489354
      IF ecfld CP '*# '. ENDIF.                             "note 489354
      sy-fdpos = sy-fdpos + 1.                              "note 489354
      CONCATENATE
*d      stb_orig-doknr                                      "note 489354
        stb_orig-dokar
        stb_orig-doktl
        stb_orig-dokvr
*d      INTO ecfld                                          "note 489354
        INTO ecfld+sy-fdpos                                 "note 489354
        SEPARATED BY space.
      stb_add-objic = '@AR@'.
    WHEN otyp_kla.
      CONCATENATE
        stb_orig-class
        stb_orig-klart
        INTO ecfld
        SEPARATED BY space.
      stb_add-objic = '@7C@'.
    WHEN otyp_ntm.
      WRITE: stb_orig-intrm TO ecfld.
    WHEN OTHERS.
ENDCASE.
*d CONDENSE ecfld.                                          "note 515408
stb_add-dobjt = ecfld(40).
CLEAR: ecfld.
WRITE stb_orig-stufe TO stb_add-dstuf NO-SIGN.
*d MOVE-CORRESPONDING stb_orig TO alv_stb.                 "note 331962
MOVE-CORRESPONDING stb_add TO alv_stb.
MOVE-CORRESPONDING stb_orig TO alv_stb.                   "note 331962
APPEND alv_stb.
ENDFORM.                    " alv_stb_prep
*&      Form get_level_level
      text
FORM get_level_level.
REFRESH : T_STB,
            T_MATCAT,
            ALV_STB.
CLEAR : T_STB,
          T_MATCAT,
          ALV_STB.
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
       EXPORTING
            capid                 = 'PP01'
            datuv                 = sy-datum
            mktls                 = 'X'
            mehrs                 = 'X'
            mtnrv                 = t_mast-matnr
            stlal                 = '01'
            stlan                 = '1'
            stpst                 = 0
            svwvo                 = 'X'
            werks                 = p_werks
            vrsvo                 = 'X'
       TABLES
            stb                   = t_stb
            matcat                = t_matcat
       EXCEPTIONS
            alt_not_found         = 1
            call_invalid          = 2
            material_not_found    = 3
            missing_authorization = 4
            no_bom_found          = 5
            no_plant_data         = 6
            no_suitable_bom_found = 7
            conversion_error      = 8
            OTHERS                = 9.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR: hd_tab.
        Entry der KlassenstatusTab. initialisieren
         cl_clstab,
        Entry 'Objekte von Klassen' initialisieren
         cl_objmemo.
REFRESH: hd_tab.
SORT t_matcat BY index ASCENDING.
Get the All levels
loop at t_stb.
    IF NOT t_stb-hdnfo IS INITIAL.
      EXIT.
    ENDIF.
Object Identification
    PERFORM obj_ident.
    READ TABLE hd_tab
        WITH KEY stufe = t_stb-stufe
                 vwegx = t_stb-vwegx
        BINARY SEARCH
        TRANSPORTING NO FIELDS.
    ?gibt es diesen Satz schon
    nein
    IF sy-subrc <> 0.
       dann in SFP-Infosatzverweistab. aufnehmen
*d       APPEND HD_TAB.                                       "HGH054648
      hd_tab-stufe = t_stb-stufe.
                                                            "HGH054648
      hd_tab-vwegx = t_stb-vwegx.
                                                            "HGH054648
      INSERT hd_tab                                         "HGH054648
        INTO hd_tab                                         "HGH054648
        INDEX sy-tabix.                                     "HGH054648
       PosNr initialisieren
      CLEAR: t_stb-posnr.
       SFP-InfosatzKz setzen
      t_stb-hdnfo = 'X'.
        stb-objty = otyp_mat.
                                                            "HGE246532
       als SFP-Infosatz in die STB aufnehmen
      append t_stb.
    ENDIF.
*del ENDIF.
    clear t_stb.
endloop.
SORT t_stb ASCENDING BY stufe
              index ASCENDING
*del        POSNR ASCENDING.                                  "HGC062735
              posnr ASCENDING                               "HGC062735
              hdnfo DESCENDING.
LOOP AT t_stb.
    T_stb-index = sy-tabix.
    MODIFY T_stb.
    PERFORM alv_stb_prep.
ENDLOOP.
Displays the Value as Level by Level
loop at ALV_stb.
    if sy-tabix = 1.
      format color 3 on.
      write:/2 'Level',12 'Item',22 'Component',
      42 'Material Description',82 'Base Qty',
      107 'Base Unit',120 'Assembly Indicator'.
      format color 3 on.
    endif.
    if alv_stb-MEINs is initial.
      v_flag = 'X'.
    endif.
    if v_flag = 'X'.
      format color 5 on.
      write:/2 ALV_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
             42 alv_stb-OJTXP.
      format color 1 off.
    else.
      if alv_stb-STUFE = '1'.
        format color 1 on.
        write:/2 ALV_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
               42 alv_stb-OJTXP,72 alv_stb-mngko,
               107 alv_stb-MEINs, 120 alv_stb-bomfl .
        format color 1 off.
      elseif alv_stb-STUFE = '2'.
        format color 2 on.
        write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
               42 alv_stb-OJTXP,72 alv_stb-mngko,
               107 alv_stb-MEINs,120 alv_stb-bomfl.
        format color 2 off.
      elseif alv_stb-STUFE = '3'.
        format color 3 on.
        write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
                42 alv_stb-OJTXP,72 alv_stb-mngko,
                107 alv_stb-MEINs,120 alv_stb-bomfl .
        format color 3 off.
      elseif alv_stb-STUFE = '4'.
        format color 4 on.
        write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
                42 alv_stb-OJTXP,72 alv_stb-mngko,
                107 alv_stb-MEINs,120 alv_stb-bomfl .
        format color 4 off.
      elseif alv_stb-STUFE = '5'.
        format color 5 on.
        write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
                42 alv_stb-OJTXP,72 alv_stb-mngko,
                107 alv_stb-MEINs,120 alv_stb-bomfl .
        format color 5 off.
      elseif alv_stb-STUFE = '6'.
        format color 7 on.
        write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
               42 alv_stb-OJTXP,72 alv_stb-mngko,
               107 alv_stb-MEINs,120 alv_stb-bomfl.
        format color 6 off.
      elseif alv_stb-STUFE = '7'.
        format color 7 on.
        write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
               42 alv_stb-OJTXP,72 alv_stb-mngko,
               107 alv_stb-MEINs,120 alv_stb-bomfl .
        format color 7 off.
      else.
        format color 1 on.
        write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
                42 alv_stb-OJTXP,72 alv_stb-mngko,
                107 alv_stb-MEINs,120 alv_stb-bomfl .
        format color 1 off.
      endif.
    endif.
    hide: alv_stb.
    clear : alv_stb.
    clear v_flag.
endloop.
ENDFORM.                    " get_level_level
*&      Form f4_for_variant
      text
FORM f4_for_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
         EXPORTING
              is_variant          = g_variant
              i_save              = g_save
              i_tabname_header    = g_tabname_header
              i_tabname_item      = g_tabname_item
          it_default_fieldcat =
         IMPORTING
              e_exit              = g_exit
              es_variant          = gx_variant
         EXCEPTIONS
              not_found = 2.
IF sy-subrc = 2.
    MESSAGE ID sy-msgid TYPE 'S'      NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
    IF g_exit = space.
      p_vari = gx_variant-variant.
    ENDIF.
ENDIF.
ENDFORM.                    " f4_for_variant
      FORM E03_EVENTTAB_BUILD                                       *
--> E03_LT_EVENTS                                                 *
FORM e03_eventtab_build USING e03_lt_events TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
       EXPORTING
            i_list_type = 0
       IMPORTING
            et_events   = e03_lt_events.
READ TABLE e03_lt_events WITH KEY name = slis_ev_top_of_page
                           INTO ls_event.
IF sy-subrc = 0.
    MOVE gc_formname_top_of_page TO ls_event-form.
    APPEND ls_event TO e03_lt_events.
ENDIF.
ENDFORM.
      FORM E04_COMMENT_BUILD                                        *
--> E04_LT_TOP_OF_PAGE

How to check Radio buttons with Differfent button values

Good Day,
I am currently trying to write a script that would hide 5 of 6 radio buttons
I have a radio button called "3. Transfer"
with values of :
     Yes;
     Supp;
     Reg; and
     do_not_transfer
as well I have a drop down called "REL.ITEM"
with values of
          3(A);
          3(B);
          4(A);
          4(B); and
          4(C)
I know how to get the value of the box and manipulate other fields
like
//START
var transfer = getField("3. Transfer").value
var relitem = getField("REL.ITEM").value
if (transfer = "Yes" || transfer = "Supp") && (relitem == "4(C)" || relitem == "4(B)"))
     getField("a. recommend").checkThisBox(0,true);
     getField("a. recommend").display = display.visible
    getField("a. I do not recommend").checkThisBox(0,false);
    getField("a. I do not recommend").display = display.hidden
else if (transfer = "do_not_transfer")
     getField("a. recommend").checkThisBox(0,false);
     getField("a. recommend").display = display.hidden
     getField("a. I do not recommend").checkThisBox(0,ftrue);
     getField("a. I do not recommend").display = display.visible
//END
I would like to make it so that if REL.ITEM != 4(A); 4(B); 4(C) that the radio box's with values of "Yes", "Supp" and "Reg" are hidden while "do_not_transfer" is still displayed and checked.
I've been going through forums, google and acrobat documentation and I can't seem to find what I'm looking for.
Thanks for your help in advance.

if (transfer = "Yes" || transfer = "Supp") && (relitem == "4(C)" || relitem == "4(B)"))
This should be:
if ((transfer == "Yes" || transfer == "Supp") && (relitem == "4(C)" || relitem == "4(B)"))
Similarly,
else if (transfer = "do_not_transfer")
should be:
else if (transfer == "do_not_transfer")
In order to work with an individual widgets of a form field, obtain an object that represents the widget using the getField method as specifically demonstrated in example #2 in the documentation: http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.476.html

Queries are not executing according to radio button

hi everyone
i am getting problem in this code
ths problem is :
there are two queries ,depending on radio button the queries willll exceute .everything is ok ,but only last query is exceuting ,my code is written below
i want :if user select a first radio button and click on the view button first query has to be diplayed or excuted .else if user selet second radio button and click the view button second query should be dipalyed .please help me
<SCRIPT LANGUAGE=JavaScript>
display()
somefunction();
check();
<FORM NAME=form1 method=post>
<input type="radio" value="1" name="Fee" checked= true>
<input type="radio" value="2" name="Fee" >
<input type="submit" value=" View " name="B1" onclick="display();" >
function check()
if(document.form1.Fee[0].checked == true)
alert(document.form1.Fee[0].value);
<%
strsql1="select * from buyer_master ";
// rs=statement.executeQuery(strsql1);
%>
else if(document.form1.Fee[1].checked == true)
alert(document.form1.Fee[1].value);
<%
strsql1="select * from emd_master";
// rs=statement.executeQuery(strsql1);
%>
out.print(strsql1);

if dont know the anwer,keep ur mouth shut.Whether we do or don't know the answer is beside the point. You asked in the wrong place. So why don't you keep YOUR mouth shut and fuck off.

BAPI to select a radio button in subscreen of standard screen

Hi All,
I have a requirement ,Please help me in solving this.
I have created a subscreen in sales order which contains 4 radio buttons.
Now i need to write a BAPI to change to radio button B from radio button A.
Can some one explain me how to do this.
Thanks in Advance,
Sri.

if its only the radio button change write a BDC and update it... if there is some thing else...try using BAPI_CUSTOMERCONTRACT_CHANGE u have EXTENSIONIN in tables tab... search the forums on EXTENSIONIN usage and codeing it...
J@Y

Calling subscreen on click of radio button

Hi,
I am creating a module pool program , in which on click of a radio butto to 'YES' a subscreen should appear ( on the main screen) with few fields so that the user can input values of it.
But I am having proble in calling the subscreen in PAI event.Actually I think it should be something like this
Module user_command.
case sy-ucomm.
   when rb_yes = 'X'
    { CALL SUBSCRREN CODE
ENDIF.
Can this be done? I f yes how? I only know how to call subscreen in PBO, but the syntax for calling subscrren is different in PAI i think.

Hi,
Try doing this.
This is your flow logic in the main screen to call the Subscreen's PBO
PROCESS BEFORE OUTPUT.
MODULE STATUS_0110.
CALL SUBSCREEN TAB1_REF1 INCLUDING 'ZTRIAL' '0111'.
In the PAI of the main screen,
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0110.
CALL SUBSCREEN TAB1_REF1.
Assign a function code to your radio button.
Layout -> Attributes -> Function Code
In the TOP include,
DATA: v_dynnr type sy-dynnr.
In module USER_COMMAND_0110.
if p_rad = 'X'.
   v_dynnr = '0111'.
else.
v_dynnr = ' '
endif.
You can check this for your reference
[http://help.sap.com/saphelp_nw04/Helpdata/EN/9f/dbabfe35c111d1829f0000e829fbfe/content.htm]

Hide Input(s) Until A Radio Button or Checkbox is selected

I've got a CFFORM I'm sculpting for my family's genealogy. The first section is for people's names. I would like to hide teh inputs from teh user, unless a radio button value is selected. Most people are not adopted, but occasionally, a person may need to enter a persons's biological name as well sas their adopted name. Starting out, the form is supposed to display only FirstName, MiddleName, and LastName, but if the radio button is selected for "This person is adopted" I wish for the inputs to display for adopted information. Is there Coldfusion that will do this?
<CFFORM..etc.etc.>
<TR>
    <TD><B>Biological First Name:</B></TD>
   <TD><CFINPUT
    TYPE="text"
   NAME="txt_p_nm_bio_f"
   SIZE="18"
   MAXLENGTH="18"
   TABINDEX=1
   id="txt_p_nm_bio_f"
   onBlur="javascript:changeCase(this.form.txt_p_nm_first)">
</TD>
</TR><TR>
<TD><B>Biological Middle Name:</B></TD>
<TD><CFINPUT
   TYPE="text"
   NAME="txt_p_nm_bio_m"
   SIZE="18"
   MAXLENGTH="18"
   TABINDEX=2
   id="txt_p_nm_bio_m"
   onBlur="javascript:changeCase(this.form.txt_p_nm_bio_m)">
</TD>
</TR><TR>
<TD><B>Biological 2nd Middle Name:</B></TD>
<TD><CFINPUT
   TYPE="text"
   NAME="txt_p_nm_bio_m2"
   SIZE="18"
   MAXLENGTH="18"
   TABINDEX=3
   id="txt_p_nm_bio_m2"
   onBlur="javascript:changeCase(this.form.txt_p_nm_bio_m2)">
</TD>
</TR><TR>
<TD><B>Biological Last Name:</B></TD>
<TD><CFINPUT
   TYPE="text"
   NAME="txt_p_nm_bio_l"
   SIZE="18"
   MAXLENGTH="18"
   TABINDEX=4
   id="txt_p_nm_bio_l"
   onBlur="javascript:changeCase(this.form.txt_p_nm_bio_l)">
</TD>
</TR><TR>
<TD><B>Biological Maiden Name:</B></TD>
<TD><CFINPUT
   TYPE="text"
   NAME="txt_p_nm_bio_mdn"
   SIZE="18"
   MAXLENGTH="18"
   TABINDEX=5
   id="txt_p_nm_bio_mdn"
   onBlur="javascript:changeCase(this.form.txt_p_nm_bio_mdn)">
</TD>
</TR><TR>
<TD><B>Male:</B>
<CFINPUT
   TYPE="radio"
   NAME="rdo_p_g"
   LABEL="Male"
   VALUE="M">
</TD>
<TD COLSPAN="3"><B>Female:</B>
<CFINPUT
   TYPE="radio"
   NAME="rdo_p_g"
   LABEL="Female"
   VALUE="F">
</TD>
</TR>

<TR>
<TD><B>Biological:</B>
<CFINPUT
   TYPE="radio"
   NAME="rdo_p_a_b"
   VALUE="A">
<TD COLSPAN="3"><B>Adopted:</B>
<CFINPUT
   TYPE="radio"
   NAME="rdo_p_a_b"
   VALUE="B">
</TD>
</TR>

<TR>
<TD><B>Adopted First Name:</B></TD>
<TD><CFINPUT
   TYPE="text"
   NAME="txt_p_nm_adp_f"
   SIZE="18"
   MAXLENGTH="18"
   TABINDEX=1
   id="txt_p_nm_adp_f"
   onBlur="javascript:changeCase(this.form.txt_p_nm_first)">
</TD>
</TR>
<TR>
<TD><B>Adopted Middle Name:</B></TD>
<TD><CFINPUT
   TYPE="text"
   NAME="txt_p_nm_adp_m"
   SIZE="18"
   MAXLENGTH="18"
   TABINDEX=2
   id="txt_p_nm_adp_m"
   onBlur="javascript:changeCase(this.form.txt_p_nm_adp_m)">
</TD>
</TR>
<TR>
<TD><B>Adopted Last Name:</B></TD>
<TD><CFINPUT
   TYPE="text"
   NAME="txt_p_nm_adp_l"
   SIZE="18"
   MAXLENGTH="18"
   TABINDEX=4
   id="txt_p_nm_adp_l"
   onBlur="javascript:changeCase(this.form.txt_p_nm_adp_l)">
</TD>
</TR>
<TR>
<TD><B>Adopted Maiden Name:</B></TD>
<TD><CFINPUT
   TYPE="text"
   NAME="txt_p_nm_bio_adp"
   SIZE="18"
   MAXLENGTH="18"
   TABINDEX=5
   id="txt_p_nm_bio_adp"
   onBlur="javascript:changeCase(this.form.txt_p_nm_adp_mdn)">
</TD>
</TR>
Submit, reset, /CFFORM etc.etc.

Group the form fields into appropriate DIVs. Then use the style property Display or Visibility to show or hide a DIV. Google and find out more.
The major difference between display="none" and visibility="hidden" is that, when visibility is set to hidden, the hidden element still occupies its place in the layout of the page. Whereas, your page may experience a jumping motion when the display is changed to none.
Here follows an example for you to play with
<script type="text/javascript">

</script>
<form name="f" id="f">
<div id="a_fields">
A1: <input type="text" name="a1"><br>
A2: <input type="text" name="a2"><br>
</div>
<div id="b_fields">
B1: <input type="text" name="b1"><br>
B2: <input type="text" name="b2"><br>
</div>
<input type="checkbox" name="toggle_A" onclick="toggleDisplay()"><br>
<input type="radio" name="toggle_B" onchange="toggleVisibility()">
<input type="radio" name="toggle_B" onchange="toggleVisibility()">
</form>

Acrobat Forms - javascript to hide/unhide text box if any one of a number of radio buttons is enable

I have a form which I am designing in Acrobat 9 which has a section where there are three questions, each with a pair of radio buttons - one for 'yes' and one for 'no'. They are in the style of a check box (with a tick). I need some help to write some code which will unhide a single field (or multiple fields if I need to use something similar at a later date) if any one of the 'yes' radio buttons is checked. So if all three radio buttons were checked, the field would be hidden but if you then changed your mind and clicked a yes button, the field would be visible.
I am new to this so any help would be greatly appreciated. Many thanks in advance! I hope that i have explained this clearly btw.

For ease of maintenance you might want to make the above script into 2 doucment level JavaScript function. One could set a return value to the result of the caparison and the other could show/hide the text field based on the result. Then a call to the show/hide function could control the show and display of the field(s) and and a call to the function for the results of the comparison could be used anywhere else and not change the field display property.
funciton Test3RB() {
// set logical result based on result of test
var bReslut = ((this.getField("rb1").value == "Y")|(this.getField("rb2").value == "Y") |(this.getField("rb3").value == "Y"));
return bResult; // return value of logical test
} // end funciton
function ShowText() {
// assume field not to be shown
this.getField("textbox").display=display.hidden;
if (Test3RB() ) {
this.getField("textbox").display=display.visible;
} // end if true
return;
} // end ShowText function
You mouse up action for each button could be:
ShowText();
And if you could test the logical value returned by the function somewhere else and did not want to modify the display field:
if(Test3RB() ){
// action for true
} else {
// action for false

Change a STATE depending in a radio button

HI everyone.
I need to do this little thing, but is have been a real pain
in the neck.
I have a radio buttons and depending in wich selection is
pressed, the state the user will go.
Example..
Select your favourite Tv Show:
( ) 4400
(o) Lost
( ) Prison Break
Submit
When the user presses submit, he will be sent to LOST state.
I mean, currentState='lost'
Or send him to state "prison" if he choose Prison Break.
Like currentState='userselection' or something....
Please someone help doing this!! Please!!
Thanks!

well it would be the same thing i posted just triggered by a
button or something like that. You can call
radiogroup1.selectedValue.toString(); at any time from any function
and if there is a selection you will get the string from the radio
button.
<mx:Script>
<![CDATA[
private function changeStateRadio():void {
currentState= radiogroup1.selectedValue.toString();
]]>
</mx:Script>
<mx:RadioButtonGroup id="radiogroup1"/>
<mx:RadioButton x="211.0" y="479.0" label="LOST"
groupName="radiogroup1" click="{changeStateRadio()}"/>
<mx:RadioButton x="211.0" y="503.0" label="Prison Rape"
groupName="radiogroup1"/>
<mx:Button click="{changeStateRadio()}"
label="Vote"/>

Is it possible to make a fillable form have variable fields - so if you select a radio button it triggers a different form field to be seen depending on which radio button is selected??

Is it possible to make a fillable form have variable fields - so if you select a radio button it triggers a different form field to be seen depending on which radio button is selected??

Yes, one needs to use some custom JavaScript code to control the other fields' properties.
Disabling (graying-out) Form Fields by Thom Parker

Simple "show / hide" script using radio buttons, need a little help

Hello;
I have a place in my form where I need to swap out what type of form you need to fill out in an area. If I don't do this, it makes the page look over crowded and if I pass it off to a 2 or 3 step process, it doesn't have enough info in each section to be worth it. It's either one or the other.
Right now, this code works nice. click on a radio button, and the form section appears and disappears. What I am trying to make this do it when the page loads, one of the radio buttons is selected and one of the form sections is visible. Then if you click on the other radio button, it swaps them.
can anyone help me tweek this code so one of the buttons is selected all the time?
here is my script.
<style type="text/css">
.showHide {
position: absolute;
background-color: #f1f1f1;
width: 350px;
padding: 1px;
color: black;
border: #999999 2px dashed;
display: none;
</style>
<script language="JavaScript">
function setVisibility(id, visibility) {
document.getElementById(id).style.display = visibility;
</script>
<form>
<input name=type type=radio onclick="setVisibility('sub3', 'inline');setVisibility('sub4','none');" value='male' checked>Selection 1
<input type=radio name=type value='female' onclick="setVisibility('sub3', 'none');setVisibility('sub4','inline');";>Selection 2
<div id="sub3" class="showHide">Selection 1 content</div>
<div id="sub4" class="showHide">Selection 2 content</div>
</form>
That's the short of it with out dumping tons of other code on anyone.
Thank you

That's what I need. I tweeked it a little and now it doesn't work. Can
you help me add one last option? I need 3 buttons that intereact leaving the red one still visible when it loads unless you click on
one of the others. this is what I'm trying to do:
<script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.3.2/jquery.min.js"></script>
<script type="text/javascript">
$(document).ready(function() {
$('#divGrey').hide();
$('#divRed').show();
$('#divBlue').hide();
$('.grey').click(function(){
//$(this).hide();
$('#divGrey').show();
$('#divRed').hide();
$('#divBlue').hide();
$('.red').click(function(){
//$(this).hide();
$('#divGrey').hide();
$('#divRed').show();
$('#divBlue').hide();
$('.blue').click(function(){
//$(this).hide();
$('#divGrey').hide();
$('#divRed').hide();
$('#divBlue').show();
</script>
<style type="text/css">
#divGrey {
position: absolute;
background-color: #f1f1f1;
width: 350px;
padding: 1px;
color: black;
border: #999999 2px dashed;
display: none;
#divRed {
position: absolute;
background-color: #f1f1f1;
width: 350px;
padding: 1px;
color: black;
border: #999999 2px dashed;
display: none;
#divBlue {
position: absolute;
background-color: #f1f1f1;
width: 350px;
padding: 1px;
color: black;
border: #999999 2px dashed;
display: none;
</style>
<input type="radio" name="Radio1" value="" id="RadioGroup1_1" checked="checked" />Selection 1
<input type="radio" name="Radio1" value="checked" id="RadioGroup1_0" />Selection 2
<input type="radio" name="Radio1" value="checked" id="RadioGroup1_2" />Selection 3
<div id="divRed">Selection 1 content</div>
<div id="divGrey">Selection 2 content</div>
<div id="divBlue">Selection 3 content</div>
it isn't doing anything right now, and no errors either that I can see. Any ideas?

Hide radio button in run time

Hi expert,
kindly help me for hide radio button in run time for web dynpro kindly give me on example .
thank's and regard's
Vikash

hi.
For Visibility :
-> bind its Visible Property to the context of type WDUI_VISIBILITY.
-> Now make it visible or invisible according to your requirement.
using Code Wizard ( Control + F7) , Set the particular context.
For visible Set as 02.
For invisible Set as 01.
code for your ref ( Generated using Code Wizard- Set the particular context attribute. )
In below code : radiobutton is binded with CA_VIS of type WDUI_VISIBILITY
DATA lo_el_context TYPE REF TO if_wd_context_element.
DATA ls_context TYPE wd_this->element_context.
DATA lv_ca_vis TYPE wd_this->element_context-ca_vis.
get element via lead selection
lo_el_context = wd_context->get_element( ).
@TODO handle not set lead selection
IF lo_el_context IS INITIAL.
ENDIF.
@TODO fill attribute
lv_ca_vis = 1.
set single attribute
lo_el_context->set_attribute(
name = `CA_VIS`
value = 02 ).
I hope it helps.
Check the sample Wedbynpro Component WDR_TEST_events . This is having the complete UI element functionalities in WDA.
Thanx.
Edited by: Saurav Mago on May 1, 2009 1:53 PM

Hide SUbscreen depending on Radio buttons

Similar Messages

Maybe you are looking for