Hide tab in travel application

Hi All,
Has any one tried for hiding the tabs in Travel application.
I want to hide tabs under My trips and expenses.
I am on ECC 6 EH 2 . I looked at configuration component but could not see anything for tabs
Thanks
santosh

Hi,
To solve the issue, delete the query in powl_type and powl_query transaction.
Run the Report POWL_D01 to clear the cache and load the application again.
Best regards,
Rohit

Similar Messages

How to hide tab bar and application bar? In ID CS4.

Hello all!
Please help! Maybe someone have idea how to disable both?
It is only waste of space imo. Will not use them for sure...
Never opening more than 2-3 docs and than can easy use shortcut ctrl+`. Tabbed pages are good in web browser imho... Application bar is also just useless and (as menu itself) too fat. Most of those are in menu and have shortcuts. New features could be in menu as well.
Don't know why interface changed so much. And why this direction.
I know monitors are bigger nowdays etc - but are wider rather than higher.
Also - maybe new interface is great and ppl love it - but would be nice to have a choice. Some may prefere maximize workspace...
M.

Thanks for responses...
Yes - mac users can be really happy. What about PC? What was wrong with classical menu?
Are designers really works with several documents the same time? So need to use tabs? Well maybe. But those who works with just one or two don't need it really. (Maybe easy solution could be: one doc = no tab, more = tabbed, would be more natural imvho. As well as turning it off for PC users as well.)
So really no trick similar to 'noallcaps'? Notabsbar? Noapplicationbar?
"You can turn off the tabs in the preferences, interface section."
Yes, I can - but no more place coz of this... Window isn't maximized in fact - is floating, what also personally I don't like. Anyway - it is the same size and use the same space as before... If u make next one doc it is even smaller, to show bottom one. Maximizing it to full screen... hiding menu and docked 'control panel' (OK this docked menu can float, np - but where is menu?).
As for maximized letter size document in CS3 vs CS4 it's 131% to 129% on my lcd. Sure - it is not much maybe. But why it must be less? Why to change smthng what was good and aesthetic solution. And why not allow people to use it in classical way? Are Mac users ("to keep the hardcore Mac users happy") better than others? :(
M.

How to *hide/remove* *u2018Corresponding Travel Planu2019* under My Expense Report

how to hide/remove the following link under My Expense Reports tab,
u2018Corresponding Travel Planu2019 column should be removed

got solution from the following document.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0ca7949-af7b-2b10-db80-ed8ca509f573?quicklink=index&overridelayout=true

Hide tabs of a tabstrip after authority-check

Hi experts,
I would like to hide tabs of a tabstrip depending on the user that is running the application. We have created an authorization-object "Z" to restrict this.
The scenario will be the following: for example, he have a tabstrip with 4 tabs. USER1 could only have editable tabs 1, 2 and 3. And USER2 have the restriction of not viewing tabs 1 and 3.
How can I associate each tab with the authorization-object?
Lots of thanks.
Javier

Hi
It depends on how you have create the authorization object: it should be have 2 fields
-one for the tab number
-one for the action (Create, Change and Display)
Max

Customizing the standard web dynpro ABAP travel application

Dear All,
Scenario :
We want to modify the existing travel application------> Create Travel Request should open an interactive adobe form
which will capture all the data and update the backend table , instead of the web dynpro screen and similarly for plan trip .
I wanted to know what is the best practice or approach for this and how to go about it.
Regards,
Geet

Hi All,
Need your valuable inputs on this.Also when I was trying to replace the standard web dynpro abap screen for create travel request...coudnt find the view.I mean on the overview of Trips and Expenses there is a button for Create Request but I am unable to find the view where this button is placed....I think its getting created dynamically.
My concern is how to call my interactive form when the button for create request is clicked...dont know where to place it.
Regards,
Geet Bijlani

Hide Tab Bar command

Under the View menu, there is a command that says 'Hide Tab Bar'. Mine is grayed out. Is anyone else able to select it? This command works with the Windows version.
btw- I liked the tabs on top in the Mac beta version

You should be able to select it. Try deleting the com.apple.safari plist from Home/Library/preferences.

How to use the Hide Tab Bar Command in Yosemite?

I guess I need a lesson in some basic Safari functionality. In Safari 8, when only one page is open (one tab, therefore), the Hide Tab Bar command in the View menu is functional. But, when a second tab is opened, the command is grayed out and the tab bar (at least in my configuration) is on screen with both tabs.
What is the point, therefore, of the Hide Tab Bar command if it is only functional when one tab is open? Or, do I need to configure my Safari differently so it can be functional with many tabs open?
Thanks for the guidance.

I tried this solution (using CP 5.5) but only to limited success. The TOC search seems to be able to pick up on some of the script but not all. I think it might be chronological, as in it will search within the first part of the script but not in latter parts, but I can't be sure. Are there any limitations to this solution, such as script (within the text box) length? Also, this may or may not be related, but the TOC rearranged and renamed all of my slides. For example, I have no duplicate slide labels and they are in order within the project, but my TOC looks like this:
Slide 2
Slide 2
Slide 3
Slide 4
Slide 4
Slide 21
Slide 40
Slide 70
Slide 16
etc...
As the project plays, the TOC status checkmarks jump around the list, appearing next to the corresponding slide (although in most cases mislabeled). Any guidance correcting these issues would be most helpful. Please let me know if you need any more information.

How to disable Tabs in the application

Hi OAF Guys
How to disable tabs in the application? if any one knows reply asap
Thanks in advance

Tabs are generated by the menu structure, if you want your page not to have tabs, have a responsibility with a menu which does not have any levels of submenus and just has your page as a function in the menu.
Thanks
Tapash

Error in travel application

Dear Friends
we are using portal on Windows 7 and IE 8 .
All my applications are working fine except Travel application when i open My trips and Expenses the page is opened but it is not bale to load the content it is keep on showing Refresh is running and after some time the system is getting hanged .
Can you please let us know whether the portal would work on Windows 7 and IE 8 .
My sap EP NW version 7.00 sp 22
Thanks in advance

Hi,
Is any javascript error coming at the bottom of the page? Make sure you use the portal URL with fqdn. Also, if you are accessing it from within the network, try to move the portal URL into "Trusted Sites" or "Local Intranet" zone from IE Settings.
Tools-Internet Options-Security.
Clear the internet cache, restart internet explorer and try again
Thanks

I accidentally pressed "Return" key and it opened around 100 finder windows. Now it won't close and when I right click on finder tab it says application not responding.

I accidentally pressed "Return" key and it opened around 100 finder windows. Now it won't close and when I right click on finder tab it says application not responding.

Iv'e tried that but that won't work either. Help please.

When I install firefox/addon/hide-tab-bar-with-one-tab, I loose the close "x" on all my tabs

when I install firefox/addon/hide-tab-bar-with-one-tab, I loose the close "x" on all my tabs!
PLAIN AND SIMPLE!!!!! I am starting to hate Firefox.
firefox 25

I'm sure the author will issue the final release at some point. It's their add-on and their call on the timing.

E-recruiting -Delete tabs for closed application groups (Menu Applications)

Hi gurus,
I want to delete the application group tabs from the menu "Applications" in e-recruiting.
The applications are stored on different tab pages. A tab page contains all applications that are based on actual job postings
(which are based on requisitions). In addition, a tab page also exists for unsolicited applications (applications that are assigned to an application group) for each application group. I would like to know who I can delete these tabs when an application group is closed. Currently, I have many tabs created without aplications inside and I would like to deleted and keep only the opened application groups. All the applications status are "rejected" or "hired" for each application group. There's no one "in process". Any idea how can I delete these tabs?
Thanks in advance,
Juanjo Garcin.

I'm not aware of any relationship link built in eRC that would allow for a search to the candidates' 'My Applications' (key word...application) or 'Favorites' for expired or closed postings. Think of when you save a URL in your web browser favorites and the site is no longer valid. Your browser doesn't know it until it searches for the address in the URL you saved that doesn't exist.
I hope this is helpful.
Samantha

Hiding Tabs in PCUI application on Runtime

Hi.
I'm looking forward to hide a tab in a PCUI application during Runtime but i'm getting the following bahiviour:
Let's assume i have 20 tabs and i don't want the TAB 15 to be displayed. I've used the method CHECK_ACTIVE_TABSTRIP in TAB 1 in order to delete from the list TAB 15 and "great" -
> that works ! :-D but..... as soon as i switch to TAB 2, TAB 15 is displayed again !!!!! does it mean that i have to redefine such method in all the MAC's and place my code for hiding the tab ?????? isn't there a BADI or kind of ? that doesn't make sence to me.
Thanks.
Armando Rodriguez.

This is how it works in PC-UI...
You can implement the logic in one method and call this in all MAC's...
Enjoy....
Raj

Is it possible to hide Tabs by using Url in FPM_OIF

Hi All.
I am calling one Standard Application from my custom application.
Standard Application has 8 tabs. There i want to hide some tabs by using URL.
Is it possible to hide through url.?
Regards,
Jack.

Issue Solved.
Implemented Enhancement for Standard Component and Hiding tabs based on Custom URL Parameter.
Regards
Jack.

Hide Tab in Selection Screen After Pressing Button

Hiii All..
My requirement is I have to disable the tab in the selection screen when the user presses the button 'Disable Tabstrip' which is present in Application toolbar..
And it should come back if the user presses another button 'Enable Tabstrip' and that time the above screen should hide.
I am showing u the screen..
Link : [https://www.filesanywhere.com/FS/M.aspx?v=8972698c58616eb771af]
If anyone knows then please help.
Regards,
Jhings.

Thanks For the reply Anju...
But the problem is.. this selection screen is not the default screen.. this is user defined screen.. and SY-UCOMM is not giving any value on the "AT SELECTION SCREEN OUTPUT" Event..
I am giving u the code.. How I defined this..
* This is screen where we are inclucing tab screen
SELECTION-SCREEN : BEGIN OF SCREEN 100.
SELECTION-SCREEN : BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-005.
SELECTION-SCREEN : BEGIN OF LINE.
SELECTION-SCREEN : COMMENT 1(15) CUS_TXT.
SELECT-OPTIONS : CUST_ID FOR VBAK-KUNNR.
SELECTION-SCREEN : PUSHBUTTON 79(20) BUT1 USER-COMMAND CLICK1 VISIBLE LENGTH 20.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE.
SELECTION-SCREEN : COMMENT 1(15) MAT_TXT.
SELECT-OPTIONS : MATNR FOR VBAP-MATNR.
SELECTION-SCREEN : PUSHBUTTON 79(20) BUT2 USER-COMMAND CLICK2 VISIBLE LENGTH 20.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE.
SELECTION-SCREEN : COMMENT 1(15) CRE_TXT.
SELECT-OPTIONS : CRE_BY FOR VBAK-ERNAM.
SELECTION-SCREEN : PUSHBUTTON 79(20) BUT3 USER-COMMAND CLICK3 VISIBLE LENGTH 20.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE.
PARAMETERS : A AS CHECKBOX USER-COMMAND UC.
SELECTION-SCREEN : COMMENT 5(33) CHK_TXT.
PARAMETERS:        NUM TYPE I MODIF ID M1.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN: END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF TABBED BLOCK T1 FOR 20 LINES.
SELECTION-SCREEN TAB (10) NAME1 USER-COMMAND UCOMM1 DEFAULT SCREEN 101.
SELECTION-SCREEN TAB (20) NAME2 USER-COMMAND UCOMM2 DEFAULT SCREEN 102.
SELECTION-SCREEN TAB (30) NAME3 USER-COMMAND UCOMM3 DEFAULT SCREEN 103.
SELECTION-SCREEN END OF BLOCK T1.
SELECTION-SCREEN: FUNCTION KEY 1,
                  FUNCTION KEY 2.
SELECTION-SCREEN : END OF SCREEN 100.
* These are subscreens
SELECTION-SCREEN : BEGIN OF SCREEN 101 AS SUBSCREEN.
SELECTION-SCREEN : BEGIN OF BLOCK B6 WITH FRAME TITLE TEXT-006.
PARAMETERS : CUS_NAM1(30) TYPE C,
             CONTACT1(12) TYPE C,
             CITY1(30) TYPE C.
SELECTION-SCREEN : SKIP.
SELECTION-SCREEN : PUSHBUTTON 1(20) BUT11 USER-COMMAND CLICK11 VISIBLE LENGTH 10.
SELECTION-SCREEN : PUSHBUTTON 25(20) BUT12 USER-COMMAND CLICK12 VISIBLE LENGTH 10.
SELECTION-SCREEN: END OF BLOCK B6.
SELECTION-SCREEN : END OF SCREEN 101.
SELECTION-SCREEN : BEGIN OF SCREEN 102 AS SUBSCREEN.
SELECTION-SCREEN : BEGIN OF BLOCK B7 WITH FRAME TITLE TEXT-007.
PARAMETERS : MAT_DES1(30) TYPE C MODIF ID M1,
             UNT1(12) TYPE C MODIF ID M1,
             MAT_TYP1(30) TYPE C MODIF ID M1.
SELECTION-SCREEN : SKIP.
SELECTION-SCREEN : PUSHBUTTON 1(20) BUT13 USER-COMMAND CLICK13 VISIBLE LENGTH 10.
SELECTION-SCREEN : PUSHBUTTON 25(20) BUT14 USER-COMMAND CLICK14 VISIBLE LENGTH 10.
SELECTION-SCREEN: END OF BLOCK B7.
SELECTION-SCREEN : END OF SCREEN 102.
SELECTION-SCREEN : BEGIN OF SCREEN 103 AS SUBSCREEN.
SELECTION-SCREEN : BEGIN OF BLOCK B8 WITH FRAME TITLE TEXT-008.
PARAMETERS : F_NAM1(30) TYPE C MODIF ID M1,
             L_NAM1(12) TYPE C MODIF ID M1,
             C_NO1(30) TYPE C MODIF ID M1.
SELECTION-SCREEN : SKIP.
SELECTION-SCREEN : PUSHBUTTON 1(20) BUT15 USER-COMMAND CLICK15 VISIBLE LENGTH 10.
SELECTION-SCREEN : PUSHBUTTON 25(20) BUT16 USER-COMMAND CLICK16 VISIBLE LENGTH 10.
SELECTION-SCREEN: END OF BLOCK B8.
SELECTION-SCREEN : END OF SCREEN 103.
Hope This could help u..
Regards,
Jhings

Hide tab in travel application

Similar Messages

Maybe you are looking for