Hide the Investment profile in WBS - Control Tab

Hi,
Our project has four level of WBS elements. The fourth wbs element would have investment profile attached to it and would be relevant for AuC and settlement.
I request you experts to suggest how should I grey out the Investment Profile in WBS Control Tab, so that no one would by mistake enter a Investment profile, in only top 3 wbs elements.
Thank you
KAP

T Code OPUK- Field selection for WBS elements.
Double click on the field Investment profile (PRPS-IMPRF), position the cursor on level field and click on new value button. Mention the level 1,2 and 3 and select the radio button 'Invis' (Invisible). Save.
With this Investment profile field will not be displayed at level 1-3 but would be visible at level 4.
Regards
Sreenivas

Similar Messages

CRVS2010 Beta - How do you hide the Group Tree for Visual Studio 2010

Would anyone know how to hide the group tree in the Crystal Reports viewer for Visual Studio 2010. I have tried
DisplayGroupTree="False" and found the property doesn't exist in the new version for VS 2010. I have search in the designer options and found nothing. Note this report is for ASP.net.
Thanks
Dave.
Subject modified as per the sticky post at the top of this forum; [Crystal Reports for Visual Studio 2010 Beta - read before posting|Crystal Reports for Visual Studio 2010 Beta - read before posting;
Edited by: Ludek Uher on Sep 15, 2010 8:55 AM

A simple search using the search box in the top right corner of this web page would have come up with the following KBase as one of the 1st - if not the 1st hit (for once, we beat Google ).
[1183704 - How to display or hide the Group Tree in CrystalReportViewer control through code in Crystal Reports 2008|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333133383333333733303334%7D.do]
- Ludek

Investment measure settlement doubles after investment profile change

We changed the indicator "Summary Settlement/Line Item Settlement" in Investment Profile (which was already used for Investment Measures) and "Amount and Percentage" indicator to allow the amount wise capitalization of AuC/Investment Measure on various fixed assets.
Now, while we try to settle the amount through CJ88, the system is settling the values that were already settled in previous periods. As a result the expenses become understated and Asset are over stated. How can we resolve this issue while we have already changed the Investment Profile as mentioned above.?

We are trying to settle March 2014 period therefore we can't carry out any new postings other than settlement.
For your reference, here is the Case:
EAC003 is an expense account and primary cost element
ABA001 is CWIP Account with Statistical Cost Element
The amount posted in March 2014 on account EAC003 is 323,813 which has value type 4 (Actual). When we run the settlement, the system settles the amount 3,053,065 (including 2,729,252 of value type 11: Statistical Actual)

Investment Profile

Hi
Could any please explain me the difference between CWIP and Investment Profiles. And please tell me the configuration required for the Investment Profiles.
Thanks & Regards
Ramki

Have a look in the SAP help in the part project or internal orders to understand how investments are working in SAP. You first need to undersatnad this befre you start
How to set this up is depended of your requerements. There are example profiles / order types in the system available.
Play with it in a sand box

WBS elements in Investment profiles

Hi Experts,
Is there any way we can check that to which all WBS element an investment profile is attached?
Regards,
Vijay

Hi Vijay,
If an inv. profile (or other customizing settings) is used somewhere, it must not be deleted in the customizing table, otherwise it cause database inconsistency.
To forbid the user to maintain this field at wbs, you can use the
customizing item
'Define Field Selection for Work Breakdown Structures' to hide\disable the filed. in the following path: Project System -> Structures -> Operative Structures -> Work Breakdown Structure (WBS) -> User Interface Settings.
Please reward points, if it is helpful.
Kind regards,
Zhenbo

Message control tab is not present in partner profile

Hi experts,
I have a requirement where I need to add a new segment to a custom idoc . I am doing this according to the following steps:-
1. In WE31, I have created a new segment and released it.
2. In WE30, I have added the new segment to the idoc and released it.
3. In WE82, I have assigned the Message type to the custom idoc type. Though this is a custom idoc, I am using a standard message type CRMXIF_PARTNER_SAVE_M.
4. In WE41, I have created a new process code ZBUPA and assigned the message type to it.Also I have created a custom function module for outbound processing Z_IDOC_OUTPUT_CRMXIF_PARTNER_S.
5. In WE20, I have created a partner profile and assigned the message type and the basic idoc type in the Outbound parameters tab.
However, I am not getting the 'Message Control' tab from where I can assign the application type to the process code.
For this Idoc, the sender system is CRM and the receiver is XI. Also I am working in CRM6.0 environment.
Please let me know how to go about this.
Thanks,
Samrat.

Hi,
I have looked into your query. As far as i know you will define the process code for Inbound Parameters only. For Outbound parameters you will define only the Reciever port in which the process code is set.
I believe you do not have to set Process code for the outbound registration.
You have to register in the site which acts as the target destination for e.g. as APLI (Individual IDOC processing)
I hope this helps.
Regards,
Venkat

I can change the tab location w/respect to the address bar, but what are "tab controls?" Can't find that explanation.

From your web site re: tabs on top- Why was this Change Made?
The main reason is that it just makes more sense. With tabs underneath, the tab and the controls were grouped together and the page was separate. With tabs on top they are now all grouped together so that each tab has it's own set of controls.
What are the "controls" of which you speak?

The article you looked at will have been
*[[How do I put tabs back on bottom like they used to be?]]
and it will have been the version of that article relating to the current Release.
I think the mention controls relates the fact that the reload and bookmarks star, and the zoom icon if you use it all clearly relate to the individual tab and the redesign makes that easier to understand.
Note that from Firefox 29 the tabs underneath will no longer be an option even from the about:config. I imagine there are or will be addons to customise Firefox so that tabs can be underneath again.
Also note that right clicking a tab gives a list of options including to pin the tab
* [[Pinned Tabs - keep favorite websites open and just a click away]]
*There are also the currently advert free new tabs which are customisable <br /> [[New Tab Page – show, hide and customize top sites]]

Controlling the menubar and toolbar in Dynamic tab shell.

Hi,
I am using the Dynamic tab shell template in my application, and will load the page fragments (in a new tab) in the adf region embeded in the shell page as and when required. I have defined the 'menu bar' and the 'toolbar' with their items in the 'globalToolbar' facet of the template hence they are rendered in all the pages. My requirement is that I want to control the 'toobar' and 'menubar' from the page(fragment) I am in. That means, I want to 'enable/disable', 'show/hide' the menu items/toolbar items depending on the page fragment I have loaded. Is there a way to achieve this?
Thanks.

Sorry, it just works this way. I made a test page
        <af:pageTemplate viewId="/oracle/ui/pattern/dynamicShell/dynamicTabShell.jspx" value="#{bindings.pageTemplateBinding}" id="pt1">
          <f:facet name="copyright"/>
          <f:facet name="about"/>
          <f:facet name="navigation"/>
          <f:facet name="globalLinks"/>
          <f:facet name="status"/>
          <f:facet name="globalToolbar"/>
          <f:facet name="globalSearch"/>
          <f:facet name="globalTabs"/>
          <f:facet name="welcome"/>
          <f:facet name="innerToolbar"/>
          <f:attribute name="logoImagePath" value="/images/LOGO.jpg"/>
        </af:pageTemplate>and can see the image. You might not see the image at design time, but once you run the page the image shows up OK.
Timo

How to hide the table control column in module pool

Dear Experts,
Please help me on this
I have 2 screens 9000 and 9001 . In screen 9000 I have 2 radio buttons if I select the 2nd radiobutton then the screen 9001 should display inthat some column has to be hide inthe table control. I have used this code but still it is not hiding please help me on that
I used this code in PBO of 9001 screen
LOOP AT SCREEN.
    IF wopr = 'X'.
      IF screen-group2 = 'ABC'.
        IF screen-name = 'ZMMT_EKKO-MATNR' or screen-name = 'ZMMT_EKKO-BANFN'.
        screen-active = ''.
          screen-invisible = '1'.
          screen-input = ''.
          MODIFY SCREEN.
        ENDIF.
      ENDIF.
    ENDIF.
ENDLOOP.
Even I tried this code also in the same screen 9001
loop at tbl_rfq-cols into cols.
IF wopr = 'X'.
IF screen-group2 = 'ABC'.
IF cols-screen-name = 'ZMMT_EKKO-MATNR' or cols-screen-name = 'ZMMT_EKKO-BANFN'.
cols-screen-input = '0'.
cols-invisible = '1'.
endif.
MODIFY tbl_rfq-cols FROM cols INDEX sy-tabix.
endif.
endif.
endloop.

Hi Balaji,
To hide a column in a table control on screen.
In the PBO of the screen, inside
loop with control <tab_ctrl_name>.
module modify_tab.
endloop.
Say for a column, you take group1 as 'ABC'.
In this module you can use the group for the input/output fields and the display/hide them as per your requirements.
if <condition>.
loop at screen.
if screen-group1 = 'ABC'. "say textbox (column for a table) has group1 as ABC
   screen-invisible = 'X'. "hide a column
   screen-active = ' '.
endif.
modify screen.
elseif <condition>.
loop at screen.
if screen-group1 = 'ABC'. "say textbox (column for a table) has group1 as ABC
   screen-invisible = ' '. "display a column
   screen-active = 'X'.
endif.
modify screen.
endif.
Similarly, you can use this code for other columns also.
Hope this solves your problem.
Thanks & Regards,
Tarun Gambhir

Acrobat XI full screen mode: how to hide the window control frame

i mainly use Acrobat to prepare full screen presentations and training, and it is annoying not being able to hide the window control
i previous versions the window control frame was always hidden / please bring this option back

Thanks, but my ID CS6 is already set to open as a "normal window". What I'm trying to resolve is the sizing and positioning of that "normal window".
I found one older post (http://forums.adobe.com/message/4609791) from someone who has the same problem, and it looks as if their question was never resolved, either. I haven't tried the script mentioned in the other message that has a link from that one. Btw, I've never seen a Window > Application Frame option within InDesign CSx for Microsoft Windows.

Hide The Table in Table-Control Dialogue Programming

Hi all,
How to hide the TABLE itself (not the columns only but the whole table completely) in table-control in dialog-programming.can any one please help me.....
Regards,
Biswajit

Hi,
use the screen table.
delclare as a "table" for the group properties of that table element.
LOOP AT SCREEN.
if screen-goupt1 = "table"
   if the pushbutton = 'HIDE'
        screen-required = 0.
        screen-invsible   = 0.
        screen-input    = 0.
        MODIFY SCREEN.
   ELSEIF the pushbutton = 'SHOW'
        screen-required = 0.
        screen-invsible = 1.
        screen-input    = 0.
        MODIFY SCREEN.
     ENDIF.
endif.
    ENDLOOP.
it solves your problme.
Thanks

How to hide the sub menus under tabs

Hi,
i have a requirement to hide the submenus(links) under tabs.
i succeded to hide the tabs and global menus. but still menus(Links) are showing under the tabs.
i wrote the below code
OAPageLayoutBean page = pageContext.getPageLayoutBean();
page.prepareForRendering(pageContext);
page.setTabs ((oracle.cabo.ui.UINode)null);
page.setGlobalButtons((oracle.cabo.ui.UINode)null);
can anyone help me please?
Regards,
Raju

Raju, add his line in your code, it will hide links under tabs:
OAPageLayoutBean page = pageContext.getPageLayoutBean();
page.prepareForRendering(pageContext);
page.setTabs ((oracle.cabo.ui.UINode)null);
page.setGlobalButtons((oracle.cabo.ui.UINode)null);
page.setPageHeader((UINode)null);
I hope this helps.
--Mukul

How can I hide the provisioning tab from end users?

Hi,
Can someone tell me if it's possible to hide the "provisioning tab" within FIM? End users do not need to see this.
I know how to modify RCDCs to hide individual fields, but I'm not sure about entire tabs.
Thanks in advance

http://social.technet.microsoft.com/Forums/en-US/74242380-c8ce-4904-863e-f28ae3605c7e/fim-r2-end-user-portal-customization?forum=ilm2

CRVS2010 Beta - WPF Viewer, how to hide the GroupTree control?

All,
I would like to turn off the display of the GroupTree for my reports using some property or function call?
I would also like to hide the text "Main Report" displayed in the status bar. This is for the WPF viewer, not the WinForms viewer.
Thanks,
Stan

For those who are using the WinForms viewer you can use the following code to hide/show the grouptree control.   Add this property to the class that is hosting the viewer.
public bool ShowGroupTree
    set
          Control control = null;
          for (int i = 0; i < m_Viewer.Controls.Count; i++)
              control = m_Viewer.Controls<i>;
              if (control is ReportGroupTree)
               { //Hide the Group tree by default.
                   control.Visible = value;
                  continue;
Edited by: Stan Harris on Aug 4, 2010 3:12 PM
Edited by: Stan Harris on Aug 4, 2010 3:13 PM

In QuickTime 10 is there a way to hide the movie controls when paused?

Is there anyway to hide the movie controls in quicktime when pausing movies? It's quite irritating when trying to analyse video, especially when resolution is low, and can't move the controls out of the video window to see whole picture. There should be a way to move them outside the movie window?

Click the mouse while it is over the player window. The onscreen controls and title bar will disappear.

Hide the Investment profile in WBS - Control Tab

Similar Messages

Maybe you are looking for