Hide the query name in the workbook

Hi Experts,
I have a workbook and contains four worksheets defained from the same query.whenever i run the workbook the query name is displaying in the worksheet.My requirement is to hide the query name from worksheets outputs after the workbook executes.
Regards

Hi,
Open the orkbook. go to settings (Bex tool bar)> uncheck 'olap functions with right click'->Hide the header row of the workbook (using excel functionality..i.e right click on row>hide)->now enable 'olap functions with right click'-->save the workbook...
you will not see workbook name after refresh.

Similar Messages

Find query name based on workbook id and vice versa

Hi,
I need to developed a progarm in which user can enter Query name ( tech name ) and it should display all workbooks releated to it and vice versa .
Is there any tables which stores this relationship.?
Wating for response.
Thx in advance .
Regards
Nilesh

hi Nilesh,
Table RSRWORKBOOK WORKBOOKID, GENUNIID is the query ID;
goto RSRREPDIR for detail query properties
(query belongs, in bex analyzer, right click cell 'properties', tab 'information' - query id)
Queries in Work Book
determine the workbooks
table with list of work books
hope this helps.

How to hide the unit in the query?

Hi Gurus,
I have three key figures,
1, Stock: Showed as 1000 TON
2, Value: Showed as 100000 USD
3, AVG: Showed as 100 USD/TON, the formula is Value / Stock
In the query, the value will display the unit, TON and USD and USD/TON.
How can I hide the unit?
Thanks ahead.

Hi,
create Calculated Key figure (for the key figures which u want to supress Units/currency)
To use the NODIM function, you have to use a calculated key figure (CKF) which is defined as
CKF = NODIM (KF)
where KF is your original keyfigure which should be displayed in the report without any units. As I mentioned above, using NODIM will help you hide the ERROR message but will not display units even for those records for which the unit value exists in the info provider
Create another calculated key figure (for amounts & quantity key figures for which you want to supress unit/currency) and insert "NODIM(Key figure name)" in formula. Use these calculated key figures for display.
Message was edited by:
bwuser

How to Find the Query used by the Workbook ?

Hi ,
I am currently involved in trouble shooting a work book where some master data values are not being displayed.
How do i find, which Query the work books is using ? or Let me know as to how should i proceed in solving the same .

Hi,
If you have access to BW Admin workbench... then choose the option metadatarepository(left side) of the BW admin workbench, search for the workbook(Technical name) and click on the "Network display dataflow" link.
If you want to know the relationship between workbook and the queries:
Check table RSRWORKBOOK which contains the WORKBOOKID and the GENUNIID.
Table RSRREPDIR contains GENUNIID, query name RNAME, AUTHOR, LASTUSER, INFOCUBE
Table RSRINDEXT contains the WORKBOOKID and workbook TITLE
You should join the tables by GENUNIID and select in RSRREPDIR the rows that have COMPTYPE='REP' for queries and object version active/modified.
With this information an infoset query can be created to list all workbook-query-user relationship (and even the query-infocube relationship).
Hope this helps u...
Regards,
KK.

Is there any way to hide the column header in BW workbook?

I have inserted a query into a workbook. But I don't want the column header to be shown. Is there any way to hide the column header? Thanks.

Hi,
If you want to do any custom formatting to the workbook and you do not want it to reset when you refresh the workbook,
You will have to You can deactivate the function for adjusting the formatting (Adjust Formatting after Refreshing) in the Display Options of the Query Properties.
When you do this, you can have your own formatting for the workbook and it will not be affected when you refresh the workbook.
Regards,
Joe

Question on how to Hide the User Name, Password, and Domain fields in the MDT Wizard

MDT 2012 U1
Deploying Windows 7 via Offline Media (ISO) to MS Virtual PC's
I am looking on how to Hide the User Name, Password, and Domain fields which are prepopulated in the MDT wizard via the CS.ini (Not so concerned about the Domain field as I am User Name and Password)
We do need the Computer Name and OU fields to be seen, so skipping the wizard is not a option
The client just does not want these fields to be seen by the end users, they dont want them to even know the account name used for adding the machine to the domain, of course the password is not displayed but it must not be displayed either.
But since we use the fields they must still be fuctional just not seen.
Thanks.....
If this post is helpful please click "Mark for answer", thanks! Kind regards

You shouldn't have to edit DeployWiz_Definition_ENU.xml. You should only need to add "SkipAdminPassword=YES" to the CS.ini file and your authentication information.
Example:
[Settings]
Priority=Default
Properties=MyCustomProperty
[Default]
OSInstall=Y
SkipCapture=NO
SkipAdminPassword=YES
UserID=<MyUserID>
UserPassword=<MyPassword>
UserDomain=<MyDomain.com>
SkipProductKey=NO
SkipComputerBackup=YES
SkipBitLocker=NO
-Nick O.
Nick,
SkipAdminPassword=YES is for:
You can skip the Administrator Password wizard page by using this property in the
customsettings.ini.
I am hidding the Username/Password/and domain field in the computer name Wizard pane which is read from the cs.iniDomainAdmin=xxxxx
DomainAdminPassword=xxxxx
DomainAdminDomain=xxxxxx
JoinDomain=xxxxxx
If this post is helpful please click "Mark for answer", thanks! Kind regards

How to get the query name from portal report name

Hi Experts ,
I am given a portal report Name and asked to do changes to the queries of that ,so how do i get the query name ,
Thanks in Advance
Nitya

Hi Nithya,
You can get the technical name by selecting the role in the portal where the report is enclosed you will generally find the report in description then identify the report you are looking then double click on that you will get a window pop-up in that you will have details tab there click on the details the your Query technical name will be displayed.
EX : zqry_w001 Then replace W with Q and seach in analyser or Designer.
Regards
Amar.

How to change the default sql servery query name?

Whenever we click on new query button, Sql server automatically opens a new query with default name SQLQuery1.sql.
Can I change this default name? What I mean to say is I have to work with quite a number of databases on different servers. So I open multiple queries on different server. So I was finding a way where whenever I click on
New Query button it inherits servername or database name (e.g If I have database name like ABCD new query name should look like ABCDquery.sql ?)
So that I can distinguish which query belong to which Database?
I would be very greateful if you can please answer this.
Many thanks

Please try with different color code option for your servers:
Ref: http://technet.microsoft.com/en-us/library/hh213617.aspx
Set the Status Color for a Server in Object Explorer
To set a server status color in Object Explorer
In Object Explorer, select the Connect button and then select Database
Engine….
On the Connect to Server dialog, select Options >>.
Select the Use custom color check box.
To select the color, select the Select… button.
Select either a basic or custom color, then select OK.
Fill in the rest of the connection information, and then select the Connect button.
Note: This is to identify different server connected not for databases.

How can I send an email to a group in my address book, but hide the individual names and email addresses?

how can I send an email to a group in my address book, but hide the individual names and email addresses?

You used to be able to do this through leaving unchecked the box in preferences "when sending to a group show all member addresses". However, that feature failed some time ago (two or three years?) and the only way to hide the addresses now is to put the group in the BCC field.

How to hide the folder name in a KM Navigation Iview

Hi,
Scenario,
I am using a KM Navigation Iview with LinkListExplorer Layout set. The Folder Name appears at the top of the collection.
Please can someone tell me how I can hide the folder name for the iview. i.e I do not want the folder name to appear in the iview.
Appreciate your help.
Thanks,
Vaishali

Folder name is located in the breadcrumb
remove your breadcrumb in your collectionrenderer of the layout set you are using.
Check the layout set you are using in your KM navigational iview.
Raghu

In ST03 , how can i see the Query name, user id,how many times executed the

HI Experts,
In ST03 , how can i see the Query name, user id,how many times executed the query.
these details how do i get from the above transaction.
EX:-if there is one report name X,I want to know how many users had executed X report today,weekly,monthly.
ex:-query userid total number of execution
sales order 0000555 5 times
custmer 05855 2 times
fast reply will be appreciated,

Hi,
Look here:
http://help.sap.com/saphelp_nw04/helpdata/en/3b/54df4204892a78e10000000a155106/frameset.htm
Also check these:
http://help.sap.com/saphelp_nw2004s/helpdata/en/2d/b8be3befaefc75e10000000a114084/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/25/ece73a39e74d27e10000000a114084/frameset.htm
Hope this helps..
Bye
Dinesh

In ST03 , how can i see the Query name, user id,how many times .

HI Experts,
In ST03 , how can i see the Query name, user id,how many times executed the query.
these details how do i get from the above transaction.
Points will be awarded.
BR
sivs

Hi Siva,
Reporting statistics data is only written to the database table if BW statistics have been manually activated for the corresponding InfoProvider first. If this has not been done, it is therefore not possible to display any reporting statistics in transaction ST03.
Therefore activate the reporting statistics for all relevant InfoProviders. To do this, set the OLAP flag in the BW Administrator Workbench (transaction RSA1) in the area Tools ® BW Statistics for InfoProvider.
Check here...........
http://help.sap.com/saphelp_nw04/helpdata/en/ca/86df4254d81e1fe10000000a155106/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c8c4d794-0501-0010-a693-918a17e663cc
Hope this will help you shiva.........
Regrads,
Vijay

How can I hide the password and user name in url???

Hi experts,
I'm creating a login page and know I have a problem.
The Username and password are verified in a Java class, after checking the user and password, the user should be linked to the portal.
So far everything has worked well.
But when I call the lin like this
res.sendRedirect ("/ irj / portal j_user =" + UserN + "& j_password =" + passw);
then the user name and Pwasswort appears in the url.
Can someone tell me how can I hide the password and user name???
It will be very helpful.
Thank you
Edited by: Cilvaring on Aug 5, 2011 12:00 PM

If there is no specific reason that you have to use sendredirect...thne you can try request.forward.....
RequestDispatcher rd = request.getRequestDispatcher("pathToResource");
rd.forward(request, response);

How can I hide the user name and password from the url address?

Good afternoon every body,
I have a form running with Oracle9i Developer Suite Release 2 and when I run the form on the web it shows the user name and password of my data base. Can anyone of you please help me to hide the user name and password, if there's any way of course?.
Thanks a lot!!.

Luis,
Then, as inolau's notice, create logon screen (or use the default one) and force the users to logon at runtime. Do not pass username/password as parameters.
inolau,
True that if the connection is specified in the config it will be the same for everyone. However, every case is different. For example one of our apps gets S3 credentials (from non-Oracle S3) as session parameters. It uses this common db connection to validate some stuff with the database, read security definitions and then it re-connects the forms using the credentials.

Error while executing the workbook query.

Hi guyz
i'm getting an error while executing the workbook Query. The actual problem is there is a filter for REQUID in the query definition for removing the doble count. there is customer exit written. the report works fine in DEVELOPMENT but it is not working in quality.
The query on which this workbook is created is working fine, but the problem is when we execute the workbook i'm facing this issue.
we re-transported the queries but still we are facing the same problem.
while we execute the query we are prompted for variable entry(Optional) for date. when we press OK we get the below error
" NO SID value found for the value REQU_4DQT75Y2RJPVT4PXZ4LHC70V3 of characteristic"
the request is not available in the BW system. the request was deleted long back, but it is still referring to the same the request id
could someone please tell me where we went wrong and why we are getting this error.
Regards,
Anil Vadde

Hey ,I think data load to your target on which the query was based had some issue.
Can you check the data load to the data target.change the status of request concerned to red and delete.do reconstruct if neeed..I think the request had some issue.
Even you can go to RSRQ or RSMO and filter on the basis of this request and see its status.
Regards,
RK

Hide the query name in the workbook

Similar Messages

Maybe you are looking for