Hide ToDos in printout (or main view?)

Hey all - I'm trying to figure out how to hide ToDo items from the list in iCal. The drop down has an option for "Show all completed items" and when I do not have it selected it hides SOME of the completed ToDo items, but not all.
More importantly, I'd like to know how I can print out a ToDo list using the print dialogue that does not include completed items. My boss likes to print out his ToDo list, but it just keeps growing because the old ToDos are not removed.
Any ideas?

gthing wrote:
Hey all - I'm trying to figure out how to hide ToDo items from the list in iCal. The drop down has an option for "Show all completed items" and when I do not have it selected it hides SOME of the completed ToDo items, but not all.
In iCal preferences--> Advanced
you can check and set to hide to do items after completion. Put 0 days for right away.
More importantly, I'd like to know how I can print out a ToDo list using the print dialogue that does not include completed items. My boss likes to print out his ToDo list, but it just keeps growing because the old ToDos are not removed.
That's how I found your thread-- I am searching for the same thing. I can't believe that functionality is not in iCal anywhere I can find. Why do I want all the completed items to print out when I didn't want them to show up at all?
In any case, something that may work for you - a great widget called DoBeDo (http://www.bluehenley.com/products/dobedo/ ) that allows a lot more flexibility in viewing and printing your iCal todo's, but what doesn't work for me is that DoBeDo can't seem to print the little icon showing the priority - that's also something I need! All in all, though, DoBeDo solves the ridiculous issue of iCal always including completed to-dos.
Note: before someone writes to point out that iCal can be set to purge completed items after x number of days, that's not workable - I need to have the completed todo's archived for future reference, but I don't want them to print on today's to-do list. Is that so much to ask, Apple?

Similar Messages

  • Hiding a subview called in a main view in WEBDYNPRO Application

    Hello Experts,
    I have a scenario in which i am calling a subview inside a main view. I have created a main view in which:-
    1. List of reportee to the manager logged in is getting displayed in the form of a table.
    2. When we select any row of this table ( means selection of any reportee row) and click on a button 'Get Details', then it  should display the detailed personal data of that reportee.
    I have successfully called an already created personal data view inside this main view to display the detailed personal data of any selected reportee. But the issue is in the main view:-
    1. This view has table containing the list of reportee getting displayed.
    2. This view simultaneously also displays the default first row detailed data of the table of reportee.
    Our requirement is:-
    1. To display only table containing the list of reportee in the first load of main view.
    2. Then when any row of this table is selected, then only the detailed data specific to that row should be displayed.
    My approach till now is:-
    1. I have removed the default first row lead selection for the table of reportee.
    2. I have created a node VISIBILITY_DET_DATA and then an attribute IS_VISI BLE under that node of type WDUI_VISIBILITY.
    3. In the layout section i have created a group GROUP_DETAIL_DATA and a view container UI element under that to call the detailed data view when any row of table containing the list of reportee is selected.
    4. I have created a binding for the VISIBLE  property of the group GROUP_DETAIL_DATA to the attribute IS_VISI BLE created in the context of the component contoller.
    5. I have then used the method WDDOINIT of the main view to write code to hide the detailed data view by setting the IS_VISIBLE flag to '02' i.e. NONE.
    But this is causing the entire view to be coming as blank view.
    I am not sure why this is happening, Can any of you suggest if i am missing anything important which is cauing this analomy.
    Rupesh

    Hi ,
    This is a Webdynpro related question. you would have got many repsonses if you posted in webdynpro forum.
    i) I would want to know how to hide Image object or the transparent container which holds the IMAGE object, dynamically through the code inside the MODIFYVIEW method of the view
    You can do a post_exit enhancement in the  MODIFYVIEW method. Get the UI element object  from view and There are methods to set the visibility at runtime.
    Is there an option to dynamically specify diffent image based on the login language with the IMage container?
    i think yes, same procedure as first question's answer. Based on condition you can change the source path of the mime object .

  • Is there a way to hide todos without due dates?

    I have gobs of items without due dates.  iCal shows them all!  Is there any way of having it hide those?
    I am able to hide todos that have a due date in the future (past the view date of the calendar), but I cannot find an option for hiding the masses of chores, list items, things to read, etc. that have no dates on them.  Fortunately, they do show up at the bottom of the list, but...
    Also, is there a way to hide todos of medium or low priority?  Again, I'd like to focus my attention on the most pressing items!

    Hi,
    As far as I'm aware there is no way to do this.
    If you'd like Apple to add this as a feature I suggest you send them feedback.
    Best wishes
    John M

  • Impossible to bring up the info pane about a todo item outside the current view

    Can anyone reproduce this?
    1) Set iCal to hide todo items whose deadlines are outside the current view.
    2) Create a todo item whose deadline is outside the current view.
    3) Search for the todo item.
    4) In the search results, double-click on the todo item.
    Expected Results:
    The same thing happens as with events: the view switches to the week containing the event, and its info pane is displayed.
    Actual Results:
    Nothing happens.

    Your site was built using tables, whose sizes are defined in your site.
    If we look at your first table definition, we can see:
    <table width="861" height="1449" border="3" cellpadding="0" cellspacing="0" bordercolor="#868787">
    Your table has a width of 861 pixels and an overall height of 1449 pixels. Anything you put into that overall box must fit those dimensions, else
    it won't be visible. Anything you add above it will push everything down. You can redefine your sizing to let you edit more inside of the table elements.
    This is why, when you type in more text, things act weird. If you are in Dreamweaver, you must find the right cell to put your text into and then enter
    text there. Unfortunately, this is going to push things around, which were all lined up using tables. And this gets everything offset with respect to
    everything else in your website.
    And that is why everyone is saying, "Start Over!"
    I just inherited a website that has been put together using tables. I'm going to have to expend considerable effort in rewriting the entire design of the
    website because of that. because everything I intend to add to the pages on the site is going to need to be deconstructed in order to get it to work
    properly if I'm adding text and pictures that need to line up with each other.
    You need something done quick and dirty and the only way I can recommend you do that is to use Dreamweaver to show you the tables you have
    and put what you need in a new table that is defined above or below the tables you all ready have defined. Do that and then get back to someone here
    who knows how to make a website correctly to clean up your entire website and make it editable -- which will cost you some money, but it will be
    money well-spent.
    I like to quote this maxim: Good, Fast, Cheap. Pick any two. This works for website design. You can get it fast and cheap, but it won't be good. I
    think you may have chosen that route.

  • How to hide a list from SharePoint tree view pro grammatically.

    Hi,
    I have enabled tree view for a SharePoint 2013 site pro grammatically. 
    I want hide some specific lists from that tree view like Documents, Workflow, Task List, Calender
    Lists which are created default when we create a site.
    How could i do that?

    I know how to hide Quick launch and Enable Tree view with properties in C#.
    My question is 
    hide some specific lists from that tree view like Documents,
    Workflow, Task List, Calender
    Lists which are created default when we create a site.

  • I'm using iPhoto 11, and instead of seeing my images in the main view, I see only outlines. (Had same problem in iPhoto 10 before upgrade to Lion Help!

    I'm using iPhoto 11, and instead of seeing my images in the main view, I see only outlines. (Had same problem in iPhoto 10 before upgrade to Lion Help!
    I'm on a Macbook Pro and all of my software is up-to-date.
    The photos and events, etc. appear to be present in my photo library, but I cannot see the actual images--only an outlined placeholder.

    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to rebuild the thumbnails. This can take 3 or 4 goes to work.

  • Main view window locked on 'one pic at a time'???

    My main view window ... somehow I locked it into displaying only one-pic-at-a-time. Can't seem to get back to the library mode, or whatever it might be called, when I can see all the pics in the folder at the same time. I can't for the life of me figure out how to change the view mode. And the scaling control, bottom right, has disappeared (or I've somehow disappeared it).
    Any help would be most appreciated...
    Ben

    Thank you Ian,
    Aie yie yie. I cycled through the V yesterday ... and somehow never got to that thumbnail view (go figure). But it worked first try this morning. Maybe my Mac was tired yesterday, like me.
    Much appreciated,
    Ben

  • Action reference in the MAIN view for other Views

    Hi Experts,
    I have created a view(MAIN) that contains SUBMIT button and also included four other views(Using ViewContainerUIElement) in the MAIN view itslef. So am calling the respective view based on some certain condition from MAIN view.
    Now my problem is, am using  check_mandatory_attr_on_view() method which is being called on SUBMIT action from MAIN view of WDDOBEFOREACTION. But it is not checking Required Fields from other views. It checks the Required Fields only in the MAIN view.
    I know that I want to call the reference of other views in MAIN view, but how can I do it?
    Please help me, as how I can check the Required fields on action of SUBMIT button in MAIN view for other views.
    BR,
    RAM.

    Hi,
    Though am in MAIN view, If i clicks the submit button it checks the Required fields on both MAIN and Sub views, where still I have not called the Sub view.
    If you didn't call the sub view, the WDDOINIT method of your sub view wouldn't have been triggered and so the sub view reference is not set in the component controller, isn't it.?
    OR you are calling sub view separately in the initial state and get the reference and then in your MAIN view calling the sub view based on condition in the View Container UI..?
    If so, create an attribute in your Main view (say sub_view_name of type string) and then use the below code to get the current sub view name and then pass the corresponding sub view reference:
    DATA:lr_view_controller    type ref to        IF_WD_VIEW_CONTROLLER,
           lr_main_view_usage  type ref to        IF_WD_RR_VIEW_USAGE.
           lr_vc_assignment      type ref to        IF_WD_RR_VIEW_CNT_ASSIGNMENT.
           lr_view_usage           type ref to        IF_WD_RR_VIEW_USAGE.
           lr_t_views                 type                WDRR_VCA_OBJECTS.
           lr_s_view                  like line of        lr_t_views.
           lr_view                     type ref to        if_wd_rr_view.    
          lr_view_controller = wd_this->wd_get_api( ).
        lr_main_view_usage = lr_view_controller->GET_VIEW_USAGE( ).
       lr_t_views  = lr_main_view_usage->GET_VIEW_CNT_ASSIGNMENTS( ). "This will return all the View Container assignments.
    * Now loop over all the View containers and get the reference of embedding view.
       loop at lr_t_views  into lr_s_view .
          lr_vc_assignment = lr_s_view-VIEW_CNT_ASSIGNMENT.
          lr_view_usage  = lr_vc_assignment->GET_DEFAULT_VIEW_USAGE( ). " This will return view usage reference
          lr_view = lr_view_usage->get_view( ). " This will have the meta info of view
          wd_this->sub_view_name = lr_view->get_name( ).   
       endloop.
    Now in onAction submit,
    CL_WD_DYNAMIC_TOOL=>CHECK_MANDATORY_ATTR_ON_VIEW(
                                  EXPORTING
                                   view_controller =  lr_view_controller " MAin view reference
    case wd_this->sub_view_name.
    when 'SUB_VIEW1'.
    CL_WD_DYNAMIC_TOOL=>CHECK_MANDATORY_ATTR_ON_VIEW(
                                  EXPORTING
                                   view_controller = wd_comp_controller->gr_emb_view1.
    when 'SUB_VIEW2'.
    CL_WD_DYNAMIC_TOOL=>CHECK_MANDATORY_ATTR_ON_VIEW(
                                  EXPORTING
                                   view_controller = wd_comp_controller->gr_emb_view2.
    Or, alternatively; create all the nodes(of sub views) in component controller, then map all those to MAIN view, then read the required node attributes and validate manually.
    hope this helps u,
    Regards,
    Kiran

  • How to Hide some Rows in a List view Web Part using JavaScript ?

    How to Hide some Rows in a List view Web Part using JavaScript ?

     Here is the code that worked for me:
    var Elements = document.querySelectorAll('div[id=WebPartWPQ3] table[class=ms-listviewtable]>tbody tr .ms-vb-lastCell.ms-cellstyle.ms-vb2')
    for(var i=0, n = Elements.length; i < n; i++)
     if(Elements[i].innerHTML=="India")
    Elements[i].parentNode.setAttribute("style","display:none")
    WebPartWPQ3 -> ID of webpart Div
    ms-listviewtable -> class name of table in Div
    ms-vb-lastCell.ms-cellstyle.ms-vb2 -> classname of td to get text

  • Open iview url in WDA main view (below some long text)

    Hi Experts,
    My WDA first page is divided into 2 parts top & bottom.
    The top will have some text and bottom will have a display areas to display the portal iview. (Display means open iview directly on opening the first page of the application without any action)
    Eg: when you open the WDA in IE it will display some text in top & google webiste opened below that long text.
    I tried putting the google url in iframe source in main view but it didnt displayed it. only a blank area came displayed which was of iframe size.
    Hope i explained my requirement.
    Regards,
    Nik

    Hi Nikhil,
    Your requirement is clear, but displaying google page where did you write the code.
    Write your code in the View or component controller->WDINIT method, then first this method will display without any action.
    In the Layout you can divide into two parts one is for text another one is for the google site display.
    Let me know if you are not able to fix the issue still...send me the code I will let you know where is an issue.
    Regards,
    Naresh.

  • Hide a column in one table view but show it in another

    I need to hide a column in one tables view but show it in another table view in the same report. Is this possible?
    Any help on this is appreciated.
    Edited by: VNC on Jan 11, 2010 9:26 AM

    Hi VNC,
    If you're crafty with javascript, you could probably write a script that would set the CSS property DISPLAY to NONE to hide the column in the table view you didn't want but leave it there in the view you did want.
    -Joe

  • How to hide a field from table maintenance view?

    Hi,
    How to hide a field from table maintenance view? 
    The field is used for data created date. I need to hide it from display.
    Thanks

    Chk this link.
    http://help.sap.com/saphelp_nw04/helpdata/en/66/33f52010dd11d6999300508b5d5211/frameset.htm
    Maintenance Attributes
    You can assign a maintenance attribute P to individual fields in the maintenance view definition in the Dictionary (SE11). It can be  H (hidden)
    H (hidden)
    A field flagged H is not displayed on the screen. This field must also be filled in the background by a routine at an event.
    The system writes R and H fields to the database like all other fields when a new data record is saved.

  • Is there a way to hide and show the whole 3D viewer with javascript?

    I'm trying to set up a pdf so that the person who's reading it can use a button to switch between a picture of the product and a 3D model of the same. The idea is that the two ways of illustrating the product can be in the same space, so that there's still room to put enough text on the front page. I have spent about three hours trying to figure this out.
    Even if I hide the model withtin the 3D viewer and make the background transparent, the 3D viewer is still there, intercepting mouse clicks and showing the toolbar.
    I've tried modfiying the Annot3D, by moving it off the page, because the javascript reference says that the "rect" property of Annot3D can be written, but the viewer just stays in the same location.
    Is there any way to get the whole thing to go away with one button click and come back with another?
    Thank you for your help and patience,
    Daniel,
    PS - In the past I've placed product drawings and pictures in the same place by putting them on separate layers, but I can't figure out how to get the 3D display attached to a layer.

    One way you could get the same effect is to use separate pages. Disable the mouse scroll for switching pages and instead use buttons to go from one page to the other.  The user will get the impression that the annotation has appeared and disappeared.
    Another hack is to use the product information as the icon on the annotation, so just disable it when you want to show the product information and make sure it lines up with an overlay of surrounding product information.

  • In Blackberry Z 10 "HUB MANAGEMENTS", automatically changes the items that are included in my main View of the Hub Managements.

    In Blackberry Z 10 “HUB MANAGEMENTS”, automatically changes the items that are included in my main View of the Hub Managements.
    I really don’t know how it happens, “Off or On” thing, without knowing me.  When any Email hits to my device and not shows in my “HUB MANAGEMENTS”, at that point of time I come to know, it’s Off again.
    Then whole process again, I go in “HUB MANAGEMENTS” and switch it on again and again.
    I need Blackberry Z10 OS developers focus on this issue…  

    I can confirm this behaviour and it defeats the purpose of having a hub.
    Could a BBTA confirm that this has been filed or even solved internally?
    Olivier - interfaSys ltd
    Developing for BlackBerry 10 devices using the Sencha Touch framework.

  • Main Viewer Window does not display correctly

    Ever since I upgraded to Aperture 3.3 through 3.4.1, the main viewer window does not display correctly.  Everything is justified to the right of the screen.  When viewing images, the are not in teh center, they are over to the right.  I can't even see the import controls when trying to import... actually I can't even press the import button or add metada.  I am really in a bad position here.  Need help with this... anyone out there have a solution please?  my clients are waiting for their photos.  Yikes!
    Right justified?
    No Import Controls?
    Faces -  Everything displayed in a single row, runs off the end of the right side of the screen

    Have a read through this page and follow the directions to delete your application preferences,
    Let us know how you go.
    Tony
    http://support.apple.com/kb/HT3805
    Message was edited by: Tony Gay

Maybe you are looking for