Hide/Unhide Iterative Rows
Hi,
I have a table with two iterative rows.But they are supposed to be displayed based on some criteria.Is there any way to hide/unhide them?.Tried with
"this.presence='visible' on Row.form load event.
Thanks in Advance.
Hi Niall,
I was unable to upload the file to workscpace.My form has a table with 3 rows where row2 and row3 are iterative rows with xml like this
<DATA>
<Details>
<Documents>
<Documentname>Doc1</Documentname>
<DocumentTitle>Title</DocumentTitle>
<DocumentType>INDIVIDUAL</DocumentType>
<DocumentInclude>Y</DocumentInclude>
</Documents>
<Documents>
<Documentname>Doc2</Documentname>
<DocumentTitle>Title</DocumentTitle>
<DocumentType>INDIVIDUAL</DocumentType>
<DocumentInclude>N</DocumentInclude>
</Documents>
<Documents>
<Documentname>Doc3</Documentname>
<DocumentTitle>Title</DocumentTitle>
<DocumentType>COMPANY</DocumentType>
<DocumentInclude>Y</DocumentInclude>
</Documents>
<Documents>
<Documentname>Doc4</Documentname>
<DocumentTitle>Title</DocumentTitle>
<DocumentType>COMPANY</DocumentType>
<DocumentInclude>Y</DocumentInclude>
</Documents>
</Details>
</DATA>
I wanted to display row2 based on conditions that "Documenttype='INDIVIDUAL' and DocumentInclude='Y'" similarly i wanted to display row3 based on "Documenttype='COMPANY' and DocumentInclude='Y'".
Regards,
Anusha
Similar Messages
-
How to Hide / Unhide iGrid Applet
I'm attempting to develop an irpt page which will feature two grids / applets. The topmost grid will be visible upon initial load of the page. Upon selecting a record from the top grid, I'd like to then unhide the bottom grid so that a user may select a row from it before then calling another page.
I've tried all of the following methods to hide / unhide the grid but none appear to be working:
1) Set the style.display of the applet to 'none' and then set it to 'inline' after row selection of the top grid.
2) Set the column widths of the bottom iGrid to 0 and then use the document.iGrid-applet.ColumnWidths=x,y JS command after row selection of the top grid.
3) Set the initial width of the iGrid applet to 1 X 1 and then use the document.getElementById("applet-iGrid").style.width / height = 'xxxpx' after row selection of the top grid.
None of these solutions work. It appears that once the iGrid applet is loaded, none of these properties may then be utilized to change it's appearance.
How can hide upon load and then subsequently unhide an iGrid applet??
Thanks in advance,
RandyThanks Udayan - this worked.
Only other tidbit was that it appears you first have to set the style display to inline in the div tag (to ensure all subsequent object references to the grid are valid).
Then in the function called by the update event of your top iGrid applet, you have to hide the bottom iGrid/applet with the style="display:none" command.
Then in the function called by the selection event of your top iGrid applet, you have to unhide the bottom iGrid/applet with the style="display:inline" command.
This ensures the applet is first displayed (so that all references to the grid object are valid), hide it when the first (top) grid is displayed, and then unhide it when a row is selected from the first (top) grid.
Thanks again,
Randy -
How to Dynamically Hide-Unhide Report Details
Is there a technique to hide/unhide data?
I am creating a report that summarizes transaction data. The users want the opportunity to review the details behind the summary as the report is being reviewed.
Is there a way to hide the detail data while providing a mechanism for the reviewer to view the detail as desired?
TIAI have implemented this in BI Publisher enterprise and using the desktop version and I don't get this error..
I did come across another thread that discusses this error. R12: Namespace prefix 'dhtml' used but not declared.
Not sure if that addresses your setup and issue.. You can send me your template to [email protected] if you would like me to take a look.
Thanks! -
How to hide a table row in pdf using javascript?
How to hide a table row in pdf using javascript?
This is only possible with LiveCycle Designer forms, not PDF forms created
in Acrobat. -
Adobe Form - Hide a table row if a condition met
Hi Helper
I am learning how to use Adobe Form - and I am trying to hide a table row if a condition is met by using Formcalc/Jave script - but I donot know how - I was told that I can use "....presence = 'hide' " property in on of the event(?) but donot know how to write the qualified name for the varable row and what event to use. Could someone please show me how
Points will be rewarded.
ThanksHi Liem,
Here is some more information:
1)
Accessing data in Table Cell
xfa.resolveNode("xfa.data.my_data.tableData[" + this.parent.index + "].column1").value
2) Accessing data nodes in Context
xfa.datasets.data.my_data.second_node.an_attribute.value == "3"
I think you will find the WebLog below very useful for your requirements.
/people/juergen.hauser2/blog/2007/09/03/accessing-data-nodes-in-sap-interactive-forms
-regards,
harman -
Is it possible to hide the inbetween rows in jTable
I want to Hide the particular Rows within a jTable. For example the first column of the jTable contains the Values are,
1
2
3
4
5
6
7
etc.,
in an ascending order.
I want to Hide the Even numher rows like 2,4,6,...etc.,
Is it possible?Look at some of these they may help.
Searched on "filter jtable"
http://onesearch.sun.com/search/onesearch/index.jsp?qt=filter+jtable&subCat=&site=dev&dftab=&chooseCat=javaall&col=developer-forums
rykk -
Hide/Unhide Button on a Custom Form?
Hello! I am looking for some ideas regarding the ability to hide/unhide a button on a custom form. Ideally, I would like to create an authorization group, if a user is a member of the authorization group, they can see the button, if not, the button is hidden. Is this something that can be done? If not, does anyone have another way of doing this? Thank you.
Are you asking specifically for Smartforms, SAPforms, Interactive Adobe forms? Or generally about UI programming?
Generally yes, this is possible and is also often done to give the user a more friendly interface to work with (without having to click on buttons, only to discover that they cannot use it anyway).
Many standard transactions are developed in this way.
Cheers,
Julius -
Hide/Unhide Column in WAD via Button
Hi,
I would like to create a Button in WAD that hides or unhides a certain column (key figure) from a DP in the WebReport. What is the INSTRUCTION to Hide/Unhide a column?
Thanks for your help!Hi Andreas,
Use Generic Navigation Block to hide or unhide a keyfigure.
Use generic Navigation web item
Assign the report to the data provider
After execution select the navigation block and select the keyfigures and uncheck the check box for the keyfigure to be hidden.
Regards
RaM -
Hide or delete row based on it's value?
If I have a column called "Name" and I want to delete or hide all the rows which include the name "smith" or alternatively all the rows with "Miss" how do I do this?
I know I can manually search to find the name "smith" but I have 60,000+ rows in my spreadsheet.
Format:
Column 1
Row 1: Miss J Jones
Row 2: Mr P Smith
Row 3: Mr C Widget
etc...
Thanks.Here is an AppleScript whic is able to delete the rows matching your criteria.
--[SCRIPT removematchingrows]
Enregistrer le script en tant que Script : removematchingrows.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Sélectionner une cellule de la colonne dans laquelle le script cherchera le mot clé.
menu Scripts > Numbers > removematchingrows
Tapez le mot à chercher puis cliquez OK.
Le script supprimera les lignes dont la cellule de la colonne sélectionnée contenait le mot saisi.
--=====
L'aide du Finder explique:
L'Utilitaire AppleScript permet d'activer le Menu des scripts :
Ouvrez l'Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case "Afficher le menu des scripts dans la barre de menus".
--=====
Save the script as a Script: removematchingrows.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Select a cell in the column in which we will search a key word.
menu Scripts > Numbers > removematchingrows
You will be asked to type the word to search.
Type it then click OK.
The script will remove the rows whose the cell of the selected column contained the choosed word.
--=====
The Finder's Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the "Show Script Menu in menu bar" checkbox.
--=====
Yvan KOENIG (VALLAURIS, France)
2010/03/24
--=====
on run
if my parleAnglais() then
set theKey to text returned of (display dialog "Enter the word to search …" default answer "At least one cell of the column in which we will search must be selected.")
else
set theKey to text returned of (display dialog "Saisir le mot à chercher …" default answer "Une cellule de la colonne dans laquelle il faut chercher doit être sélectionnée.")
end if
set {dName, sName, tName, rname, rowNum1, colNum1, rowNum2, colNum2} to my getSelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
set nbRows to row count
repeat with r from nbRows to 1 by -1
set maybe to (value of cell r of column colNum1) as text
if words of maybe contains theKey then
remove row r
end if
end repeat
end tell -- Numbers
end run
--=====
on getSelParams()
local r_Name, t_Name, s_Name, d_Name, col_Num1, row_Num1, col_Num2, row_Num2
set {d_Name, s_Name, t_Name, r_Name} to my getSelection()
if r_Name is missing value then
if my parleAnglais() then
error "No selected cells"
else
error "Il n'y a pas de cellule sélectionnée !"
end if
end if
set two_Names to my decoupe(r_Name, ":")
set {row_Num1, col_Num1} to my decipher(item 1 of two_Names, d_Name, s_Name, t_Name)
if item 2 of two_Names = item 1 of two_Names then
set {row_Num2, col_Num2} to {row_Num1, col_Num1}
else
set {row_Num2, col_Num2} to my decipher(item 2 of two_Names, d_Name, s_Name, t_Name)
end if
return {d_Name, s_Name, t_Name, r_Name, row_Num1, col_Num1, row_Num2, col_Num2}
end getSelParams
--=====
set {rowNumber, columnNumber} to my decipher(cellRef,docName,sheetName,tableName)
apply to named row or named column !
on decipher(n, d, s, t)
tell application "Numbers" to tell document d to tell sheet s to tell table t to return {address of row of cell n, address of column of cell n}
end decipher
--=====
set { d_Name, s_Name, t_Name, r_Name} to my getSelection()
on getSelection()
local _, theRange, theTable, theSheet, theDoc, errMsg, errNum
tell application "Numbers" to tell document 1
set nbCols to column count
repeat with i from 1 to the count of sheets
tell sheet i
set x to the count of tables
if x > 0 then
repeat with y from 1 to x
try
(selection range of table y) as text
on error errMsg number errNum
set {_, theRange, _, theTable, _, theSheet, _, theDoc} to my decoupe(errMsg, quote)
return {theDoc, theSheet, theTable, theRange}
end try
end repeat -- y
end if -- x>0
end tell -- sheet
end repeat -- i
end tell -- document
return {missing value, missing value, missing value, missing value}
end getSelection
--=====
on decoupe(t, d)
local l
set AppleScript's text item delimiters to d
set l to text items of t
set AppleScript's text item delimiters to ""
return l
end decoupe
--=====
on parleAnglais()
local z
try
tell application "Numbers" to set z to localized string "Cancel"
on error
set z to "Cancel"
end try
return (z is not "Annuler")
end parleAnglais
--=====
--[/SCRIPT]
At this time, I don't know how to Hide a row thru AppleScript.
Yvan KOENIG (VALLAURIS, France) mercredi 24 mars 2010 17:02:20 -
HOW DO I HIDE & UNHIDE APPS PURCHASED IN APPS STORE PURCHASES LIST ON MY MAC
HOW DO I HIDE & UNHIDE APPS PURCHASED IN APPS STORE PURCHASES LIST ON MY MAC? MAVERICKS 10.9.5...
You need to reach level 3 (500 points) to add a custom avatar.
As you collect reputation points, your status level increases and you receive additional privileges.
Level
Points
Privilege
1
0
2
150
Report posts
3
500
Upload a custom avatar
4
1,000
Attend conference calls
5
4,000
Create User Tips
6
8,000
Access the virtual MVP lounge. Attend in-person Communities meetups.
7
20,000
8
35,000
9
50,000
10
80,000+ -
Hide unhide rolemenu in web with only one link
Hi together
is it possible to hide unhide the role menu in web with only one link by using command urls?
Regards,
M. ErbilHi Memo,
use something like this:
<!-- BW data source object tags -->
<object>
<param name="OWNER" value="SAP_BW"/>
<param name="CMD" value="SET_PROPERTIES"/>
<param name="TEMPLATE_ID" value="ROLEMENU"/>
TEMPLATE PROPERTIES
</object>
<HTML>
<HEAD>
<TITLE>Rolemenu</TITLE>
<link href="/sap/bw/Mime/BEx/StyleSheets/BWReports.css" type="text/css" rel="stylesheet"/>
<script type="text/javascript" >
/* This function switches the attribute HIDDEN (alternate Tablestyles) for item mytable
1. Get actual value for attribute HIDDEN
2. Send Commando with new attribute to BW Server */
function switch_visibility(mytable) {
var prop = SAPBWGetItemProp(mytable);
var visibility='X';
if (prop != null){
for(i=1;i<prop.length;i++){
if (prop<i>[0] =="HIDDEN") visibility = prop<i>[1];
if (visibility =='X') {
visibility=' '
else
visibility = 'X';
SAPBWOpenURL(SAP_BW_URL_Get() +'&item=' + mytable +'&HIDDEN=' + visibility);
-->
</script>
</HEAD>
<BODY>
<P> <object>
<param name="OWNER" value="SAP_BW"/>
<param name="CMD" value="GET_ITEM"/>
<param name="NAME" value="ROLEMENU_1"/>
<param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_MENU"/>
<param name="WIDTH" value="335"/>
<param name="GENERATE_CAPTION" value=""/>
<param name="TARGET" value=""/>
<param name="HEIGHT" value="285"/>
<param name="IFRAME" value="X"/>
<param name="IFRAME_STYLE" value="X"/>
<param name="HIERARCHY_COLOR" value=""/>
<param name="DIFF_ICONS" value=""/>
ITEM: ROLEMENU_1
</object> </P><!—Include a button in HTML with id mybutton1. By clicking on link the function switch_visibility for item ROLEMENU_1 will be executed à
<table class="SAPBEXBtnStdBorder" cellspacing="0" cellpadding="0" border="0"><tr><td>
<table>
<tr>
<td class="SAPBEXBtnStd" id="mybutton1" > <A href="javascript:switch_visibility('ROLEMENU_1');" >show / hide menu</A>
</td>
</tr>
</table>
</td>
</tr></TABLE><!— call function set_button, to set the correct style class for button mybutton1 à
<script type="text/javascript" >
<!--
set_button('ROLEMENU_1', 'mybutton1');
--></SCRIPT>
</BODY>
</HTML>
Regards,
Adem -
I think there are many times in one's life where it would be great to be able to hide/unhide an email account (without actually deleting it). For instance, when one is on vacation and doesn't want to be "in touch" with what is going on at work via your mobile device which we often use for both work and personal purposes. It would be great if this feature were available with the next iPhone OS update. I think many people would find it of benefit. Hopefully this will get done!
?? You can already do this. In settings, just go into the settings for a particular email account, and turn it off. When you launch the mail app and it updates, any account turned "off" will not show up. To get it back, just go back into it's settings and turn the account back "on" (it's just a slider switch).
Unless I am completely misunderstanding what you want. -
Is there a Hide/Unhide photo keyboard shorcut? There is none listed on the shortcut list.
Having a shortcut would seem critical for a good workflow: View your Album/Event full screen and just press next and (if necessary) hide the photo...
I guess the other alternative would be to add it myself using Keyboard Shortcuts under Keyboard and Mouse in the System preferences.
[Edit] Nevermind - just found it - Command L [/Edit]Hi Hannes,
Use the menu Edit >> Keyboard Shortcuts to modify/create new shortcut keys for the menu commands in AI.
Just select the option "Menu Commands" in the drop-down list and modify/create them accordingly.
With Best Regards,
Raghuveer -
Is it possible to hide/unhide page in acrobat? How can I do?
Can it work in reader?
Please help me....As it has been said, Acrobat can do it rather easily.
For Reader, there are some possibilities.
• You have access to the Reader Extensions Server (or whatever they call it today), and then you can spawn Template pages, and delete them again in Reader.
• You work with "virtual pages", by making the pages the icons of page-sized Button fields, and provide according navigation tools. Showing/hiding fields works in Reader without the need of any additionsl rights. It may, however, be a little bit unusual for the users.
HTH.
Max Wyss. -
Hide/Unhide Columns in WEBI Report output
We have a WEBI report which has 2 columns/measures to display the cost in EUR and USD. User would like to have the flexibility to filter the column so as to display USD or EUR cost column. Is it possible to hide/unhide column in WEBI. Can we have a input control on multiple measures so that user can dynamically select which measures they want to see on report.
Its possible in BEx Analyser using filter option on key figure. Is simillar functionality available in WEBI? We're on BO 3.1 XI. Is thre any other way to achieve this?
Thanks,
Milindhi,
i think it is not possible to hide a column based on condition. but in webi 4.0 u have an option using which, u can hide/ show a table based on the user selection. in ur scenario, create two tables, one with value in USD and other in EU, super impose the table. then right onthe table and select "Format cell". in that u ll have a option to hide the table based on condition. select that and apply the condition.
see the follwoing url for more info : http://bihappyblog.com/2011/11/05/dynamic-visibility-in-webi/
thank u,
Edited by: aady89 on Mar 9, 2012 7:39 AM
Maybe you are looking for
-
Hello guys, Can you kindly let me know if there is any FM to create a PO after the PR is created. Thanks.
-
ITunes won't recognize IPod touch
Problem started when I switched to 64bit iTunes On a older Pc,Got a new pc And still cannot get iTunes[64bit] to read the iPod touch.It shows up in windows,I've changed syncing cords,I tried all 15 steps That was listed in the support document for th
-
I set up a cluster with two managed servers , one is ServerA:8001 and another is ServerB :9001 , i have enabled SSL for both servers , the access URL for proxy is https://Server:80/Applicatiion , the purpose of proxy server is to transfer the request
-
Absolute URL IMAGE UI control in Web Dynpro ABAP fails
I would like to display a .jpg from the Internet, either using a URL or an RFC Destination as the source. The "Web Dynpro ABAP Development in Detail" manual says that this can be done using only the Source attribute of the IMAGE UI control (see page
-
I just purchased a song. The song downloaded, but I only have 30 seconds of a 5 minute song. There are no songs that haven't been downloaded when I choose that option.