Hide Units

Hi all,
How to hide units in the report result display? in BI 7.0 queries.
for Ex: im getting a value dispalyed as "4029.12 PC". I need to hide the Units "PC" in the report result.
Please guide me in this issue.
Thanks in Advance.
Regards,
Ravi

Did you try using.
Nodim() ?????
Hope this helps.

Similar Messages

  • Hide Unit price from sales order for sales user without change authorization of document setting

    Hi all expert
    Hide Unit price from sales user without change authorization of document setting.
    I have also refer this note
    SAP B1 2005 Purchas Order,Good Reciept PO'S, and Unit Price Block
    but sill I had not getting my proper solution.
    I want to restrict sales person to see & access unit price. Here I know option of block authorization of document setting but its not good option because , In future ,if sales user wants to changes forms setting in future so Its become problematic for user. so I want do this without restrict user for form setting & only hide unit price table from him/her. also He/her able to access form setting with out unit price.
    Please reply
    Amol Nikam

    Hi Experts,
    Please Tell me Is there any option "Hide Unit price from sales order for sales user without change authorization of document setting"
    Regards/Thanks
    Amol

  • How to Hide Unit Currency in Query Display

    Hi to all,
    I have created Query for Receivables .
    wheher i am using 0FI_AR_4 as datasource and 0CREDIT_LC as Credit amount in local currency and using 0CREDIT_LC at query level as Key Figure.
    Now when i display Query in RSRT or PORTAL ,  0CREDIT_LC is display with Unit Currency.
    example      ;
                                 2100 INR              3500 INR         2300 INR
    I need that only value should display not Unit Currency at query level.
    example      ;
                                 2100             3500         2300
    Please can nay one help we with that.
    I shall be thankful to you for this.
    Regards
    Pavneet Rana

    Hi,
    Please create a calculated key figure and use the function NODIM
    so you have will have a new calculated key figure = NODIM ( cube key figures)
    Note - this will be fixed for this query.. you will not be able to change it at the report level... units can only be seen if you remove the NODIM

  • How to hide/suppress unit of measure for  values of columns in structure

    hi,
    hi i am using following in rows and columns.
    Rows:
    1. material group
    2. structure (key figures)
         key figure 1
         key figure 2
         key figure 3
    3. base unit of measure
    Columns:
    1. structure (time scale)
        fiscal period 1
        fiscal period 2
        fiscal period 3
        fiscal period 4
    If I run the report I am getting unit of measure for each key figure in each fiscal period. I wan to show unit of measure only once in a base unit of measure (row).
    I want to suppress / hide unit of measure in columns (time scale - fiscal period). If I wasn't using strcture, I could have used NODIM in formula. But I dont think that I can use NODIM in strctuere.
    Is there any alternative.
    pls suggest. Thanks.

    It seems that i have found the answer. I have checked the query properties --> check the option - Display scaling factors for key figures.
    Pls let me know if  you have any other alternatives. Thanks.

  • External hard drive icon has disappeared

    I have a 160gb acomdata external on FW. About a week ago the icon for the external disappeared (prior to the icon dropping out everything worked fine). Finder does not display it. If I use DU I can see the drive, get drive info and see the files on the drive, but DU will not let me do first aid on it nor can I mount the drive. What happened?

    It's FAT32, here is the profile from system:
    HM160HC:
    Manufacturer: DMI
    Model: 0x550
    GUID: 0x1010055011EB12
    Maximum Speed: Up to 400 Mb/sec
    Connection Speed: Up to 400 Mb/sec
    Sub-units:
    HM160HC Unit:
    Unit Software Version: 0x10483
    Unit Spec ID: 0x609E
    Firmware Revision: 0x353
    Product Revision Level: 3.53
    Sub-units:
    HM160HC SBP-LUN:
    HID Unit:
    Unit Software Version: 0x0
    Unit Spec ID: 0x1430
    When I connect it to my PC laptop same problem the system will not recognize it.

  • Cannot find vilid dvd drive

    i have a external dvd drive, when i put in a dvd in dvd player 4.6.5 opens. but i get an error message. it is a LaCie drive hook up by firewire
    viliddvd drive cannot be found (-70012)
    can onyone help?
    thanks,
    dan
    FireWire Bus:
    Maximum Speed: Up to 400 Mb/sec
    LaCie d2 DVD-RW Firewire:
    Manufacturer: LaCie Group SA
    Model: 0x0
    GUID: 0xD04B5C0C0458BA
    Maximum Speed: Up to 400 Mb/sec
    Connection Speed: Up to 400 Mb/sec
    Sub-units:
    LaCie d2 DVD-RW Firewire Unit:
    Unit Software Version: 0x10483
    Unit Spec ID: 0x609E
    Firmware Revision: 0x102
    Product Revision Level: LC00
    Sub-units:
    LaCie d2 DVD-RW Firewire SBP-LUN:
    2500JB External:
    Manufacturer: WD
    Model: 0x0
    GUID: 0x90A9500008A2C4
    Maximum Speed: Up to 400 Mb/sec
    Connection Speed: Up to 400 Mb/sec
    Sub-units:
    2500JB External Unit:
    Unit Software Version: 0x10483
    Unit Spec ID: 0x609E
    Firmware Revision: 0x223
    Product Revision Level: 2.23
    Sub-units:
    2500JB External SBP-LUN:
    Capacity: 232.89 GB
    Removable Media: Yes
    BSD Name: disk2
    OS9 Drivers: Yes
    S.M.A.R.T. status: Not Supported
    Volumes:
    Storage:
    Capacity: 232.76 GB
    Available: 165.54 GB
    Writable: Yes
    File System: HFS+
    BSD Name: disk2s10
    Mount Point: /Volumes/Storage
    HID Unit:
    Unit Software Version: 0x1430
    Unit Spec ID: 0x1101

    I too have a Lacie external DVD and had similar problems. As Malcolm Rayfield suggested, VLC gives a partial solution, but you have to amend CD&DVD preferences to select VLC from 'other application'.
    I can play Video DVDs but it is quite unstable and keeps giving out error boxes that it has quit (-do I want to send a bug report?). I was reading this discussion as I hoped to find a better solution than VLC!
    Anyone got any other recommendations?
    I may have to upgrade to a Mac with superdrive to overcome these problems!
    G4/466   Mac OS X (10.4.6)   Crossfire External HD, Lacie Dual DVD =/-RW

  • Automatic creation of TO's for Handling Unit Inbound Delivery -del type HID

    Hi Guru's,
    I would like to create the putaway TO's for a Handling Unit inbound delivery automatically (delivery type HID). This means at the moment of the creation of the Inbound Delivery. The packing is also automatically done by the customizing of the delivery type. Did somebody faced this requirement before?
    Thx,
    Carl

    I found the solution:
    Choose Customizing activity Define Output Types for Inbound Delivery, and define output type WMTA. Enter the following values in the detail view of output type WMTA under General Data:
    Enter an existing Access sequence. Access sequence 0001 is predefined in the standard system.
    Set the indicator Access to conditions.
    Set the indicator Partner-indep. output.
    Save your entries.
    In the menu tree, choose the entry Processing Routines in the Customizing activity Define Output Types, and enter the following values:
    Choose entry 8 (special function) for the indicator Transmission Medium.
    Enter RLAUTA20 in the field Program.
    Enter ENTRY in the field Form Routine.
    Save your entries.
    Choose the Customizing activity Maintain Output Determination Procedure.
    Define a procedure and enter the output type WMTA in the control view of the procedure. The procedure E10001 is predefined in the standard system.
    To define a suitable condition record for inbound deliveries,
    choose Logistics -> Materials Management -> Purchasing -> Master Data ->
    Messages -> Inbound Delivery -> Create from the SAP menu.
    Enter the output type WMTA.
    Enter output medium 8 (special function) for delivery type Inbound Delivery.
    Select the desired Date/Time.
    Select the desired Language.
    Cheers,
    Carl

  • How hide currency unit in BEx 7.0

    Hi,
    in my report I see the column values suffixed with the currency unit ex: 793,23 USD. How do I hide the "USD" in my report. I am working in BI 7.0
    thanks,
    sd

    Create a Formula Key Figure  (FKF) and use NODIM from the Data Functions for this and hide your original Key Figure (KF).
    FKF = NODIM (KF)

  • How to hide the unit in the query?

    Hi Gurus,
    I have three key figures,
    1, Stock: Showed as 1000 TON
    2, Value: Showed as 100000 USD
    3, AVG: Showed as 100 USD/TON, the formula is Value / Stock
    In the query, the value will display the unit, TON and USD and USD/TON.
    How can I hide the unit?
    Thanks ahead.

    Hi,
    create Calculated Key figure (for the key figures which u want to supress Units/currency)
    To use the NODIM function, you have to use a calculated key figure (CKF) which is defined as
    CKF = NODIM (KF)
    where KF is your original keyfigure which should be displayed in the report without any units. As I mentioned above, using NODIM will help you hide the ERROR message but will not display units even for those records for which the unit value exists in the info provider
    Create another calculated key figure (for amounts & quantity key figures for which you want to supress unit/currency) and insert "NODIM(Key figure name)" in formula. Use these calculated key figures for display.
    Message was edited by:
            bwuser

  • IP: How to hide currency/unit from input-ready query headers?

    Hi,
    Is there a way to hide currency/unit from input-ready BEx web query headers? I've used NODIM-concept for read-only reports, but with input-ready it won't work since formulas cannot be input-ready. Is there a setting somewhere or workaround? The web query is published by WAD.
    Thanks!
    Aki

    Hi Aki,
      If you wanna do this in input-ready query, there is only one scenario: you restrict 0UNIT and 0CURRENCY as one certain constant value for the 'Characteristic Restrictions' in the 'Filter', and DON'T set the according 'Can Be Changed at Execution' selected. Then the 0UNIT and 0CURRENCY can be put into 'Free Characteristics', no neccessary moving them to data area.
      If there're multiple value for 0UNIT or 0CURRENCY for your planning, you can't hide them in data area of INPUT-READY query, since they belong the dimension 'U'.
    Hope this will help.
    Gerald

  • A/R invoice PLD for BOM items need to hide the unit price

    Dear All,
    Our customer would like to have an A/R invoice like this: if the invoice has any BOM item, the unit price of child items should be hid. That means, I need to determine, if the item is the child of its parent, hide the unit price of it. Is there any way for me to know which item is the child item in A/R invoice PLD? I cannot find a column like status of item in the table that tells me this item is a regular item and that item is the child of an item. Thanks a lot.
    Regards,
    Yuka

    Thanks for your reply. The problem is, an item in the invoice might be the child item or the regular item.
    e.g, we have item A and B, they the child item of C. In the invoice, the customer may order 5 item C then add 10 item A as well.
    Then the invoice will like this
    C    5
    A    5
    B    5
    A    10
    Then they would like to hide A 5 B 5 but display A 10 as regular item.

  • How can I hide certain bookmarks so others cant see them on my unit

    ''locking - duplicate - https://support.mozilla.com/en-US/questions/850438''
    I would like to hide some bookmarks where only I can see them, how can I do this?

    Sorry, Firefox doesn't have a feature for that, and I haven't seen an Add-on which adds that type of feature to Firefox. <br />https://addons.mozilla.org/en-US/firefox/extensions/bookmarks/
    My suggestion is a "Guest" logon user account for other people who use your PC. That will keep all your data from being seen by anyone except you.

  • How to hide the rows in report which there is no data

    Hi,
    I am using web I rich client Xi R3.1 version. In the report i am displaying data region wise and applied section on the column named 'business unit'. Now i see there is no data for some business units and dont want to show in the report. There are some columns like projectname, manager, status summary which i am displaying region wise for each business region now I dont want to display 'Enterprise Infrastructure services, Equities Technology and Fixed income Technology which there is no data. Could any one please tell how to achieve this.
    I am able to display not the empty rows by the following steps but i also do not want to show the names of business units on the report.
    > Select the block
    > Go to properties tab -> Display
    > Uncheck Show when empty option.
    Thanks in advance,
    Eswar
    Edited by: Eswar Rao on Mar 26, 2010 10:03 AM
    Edited by: Eswar Rao on Mar 26, 2010 10:04 AM

    hi Eswar,
    List the columns for which if there is no data, you want to suppress section details and section name.
    1) Select 'Section on: Field'. Go to Properties tab.
    2) Display -> 'Hide section when the following are empty' . click on the Right side drop down.
    3) select (Check Mark) the appropriate columns which you have listed.
    3rd step is very important as it will decide to display section name or not.
    Please try it again.
    --Vamsee

  • Genric datasource using FM to extract quantity with out unit fields

    Hi All,
    I have a situation where i need to extract data from one custom table with 5 fields. one filed is quantity but i created structure and also the refernce fields for quantity in it. i wrote a program also which is fine. but while creating a datasource it is giving error that particular field in the extractor is hide and unable to craete the datsource. could someone tell me how to proceed further.
    Regards,
    sekhar
    Edited by: Sekhar Reddy on Oct 21, 2008 4:40 PM

    HI,
    The structure you created for DataSource is wrong, because genarally this kind of error will come for Qty and Currency unit, so take ABAPer help and create structure.
    I also got the same error, but that table was designed by ABAP team, so I informaed to that team then they corrected that table.
    Thanks
    Reddy

  • ERROR: Units field CURR1 for field HSL of DataSource 3FI_SL_Z3_SI is hidden

    Hi all,
    This is the error msg i'm getting when trying to activate the extract structure for FI-SL. Did anybody come across it? And how to unhide the HSL,ASL etc fields .. four of my fields got locked and i have no clue what made it hide. these were the fields that werent showing up in the extract structure that was generated, so i appended the extract structure with these fields .. then it asked for a reference table and structure which i provided, but wasnt able to activate it. so i deleted all the fields in the append and the datasource all together. Now when trying to assign a datasource to the ledger ... this is the msg i'm getting for all the fields i tried to include in the append. How can i get rid of the msg(unhide) the fields and what is the right way of appending fields(currency, unit) to the extract structure?
    Any help is appreciated.
    Thanks in Advance.
    Mav.

    You must send the unit/currency with a quantity/amount field, so
    - they must be defined in the structure/view behind your customer datasource,
    - they must be hidden or not together,
    Change  the hidden flag via RSA6 or RSO2.
    Regards,
    Raymond

Maybe you are looking for