Hiding button in me28 report

HI friends,
              I want to Disable the print preview , information, summation, subtotals , ascending
             and descending buttons when we execute the me28 report.
            Please do let me know if this is possible , If yes then how to go abt it.?
Thanks,
srinath.

Use transaction variants:
[http://help.sap.com/saphelp_nw04/helpdata/en/67/232037ebf1cc09e10000009b38f889/content.htm]
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a023f383-83b1-2b10-3983-9fbbcbfd11f1]
Regards

Similar Messages

Hiding refresh button in Webi Report

Hello experts,
I would like to hide 'refresh' button on webi report in XI 3.1. One way to do this is using rights which I don't intend to use at this stage.
Do we have any other way out to do this task?
Many thanks in advance
Regards,
John

Options:
a) roll your own viewer/portal - probably the safest bet, although a bit unwieldy if Infoview works fine and you only want to make this specific change
b) make changes to Infoview's javascript files that render the toolbar buttons - entirely unsupported by SAP as well as a maintenance headache during upgrades
c) ...revisit your reasons for not being able to disable refresh of the report to users - surely there's a security matrix that satisfies your requirement. If there isn't (meaning that, for whatever reason you need these users to refresh against this content area in normal scenarios but want it disabled for this portion of your workflow) - then there are kludgy "work arounds" like adding/removing the user to/from a "no refresh" group you've created in the CMC, programmatically, when running the report(s)
good luck

While Printing using Print Button on Crysal Report Loses focus.

Hi all,
I am using CR XI along with VS2003 for developing my application.
My application uses a Treeview to list all the available reports, once user select one of the report. I am using another dll, which contain all the rpt files as Embedded Resource, for showing the report in Crystal report viewer.
Once report get loaded, I am using Print Button from Crystal report viewer to print the report.
report get printed properly..
However a strange behavior occurring, Form with Crystal report viewer control placed loses focus and immediate below window coming into focus (some other opened window get activated and bring to front and hiding my application).
Any suggestion would be appreciated.
Thank you
Riju K K

Hi Brian,
Thanks for you are reply.
I think I am not creating a separate process,
From my application, I am creating an instance of form (which is in another DLL) which is hosting Crystal report viewer.
If click "Print" button on the Crystal report viewer, I am getting a Printer selection form.
If I cancel from there ,my Crystal report viewer form get focus back.
If select a printer and click "OK". my Crystal report viewer form lost focus and some of the other window opened (word, ie, etc) before get focus.
My assumption is Crystal Report viewer's "Print" button may be using a separate thread for Printing.
that may creating this focus issue.
what you think?

Information button in ALV report

Information button in ALV report is not working. any suggestion

I have copied standard tool bar from standard program.During debugging, I have found that function code is defferent. Then I changed function code according to that.

How to add button in ALV report (Class method )?

Hello experts,
I have developed one ALV report using classes.
I want to add one more button on the report like already is there named DISPLQUA
How ca i do that here?
Following the code of CLASS definition & implimentation
CLASS lcl_handle_events DEFINITION.
PUBLIC SECTION.
    METHODS:
      handle_on_user_command FOR EVENT added_function OF cl_salv_events
        IMPORTING e_salv_function.
ENDCLASS.                    "lcl_handle_events DEFINITION
      CLASS lcl_handle_events IMPLEMENTATION
CLASS lcl_handle_events IMPLEMENTATION.
METHOD handle_on_user_command.
    CASE e_salv_function.
      WHEN 'DISPLQUA'.
        PERFORM show_quant_record.
     WHEN 'DISPQM03'.                                " Here i want to add button
       PERFORM display_quality_notification.
      WHEN OTHERS.
    ENDCASE.
ENDMETHOD.                    "handle_on_user_command
ENDCLASS.                    "lcl_handle_events IMPLEMENTATION

HI Ronny.
Code snippet for reference.
CLASS LCL_EVENT_HANDLER DEFINITION .
PUBLIC SECTION.
    METHODS :
*--Toolbar control
      HANDLE_TOOLBAR FOR EVENT TOOLBAR
        OF CL_GUI_ALV_GRID IMPORTING E_OBJECT
                                     E_INTERACTIVE,
ENDCLASS
CLASS LCL_EVENT_HANDLER IMPLEMENTATION.
*--handle toolbar
METHOD HANDLE_TOOLBAR.
* append a separator to normal toolbar
    CLEAR G_TOOLBAR.
    G_TOOLBAR-BUTN_TYPE = 3.
    APPEND G_TOOLBAR TO E_OBJECT->MT_TOOLBAR.
    CLEAR G_TOOLBAR.
    G_TOOLBAR-FUNCTION = 'SAVE'.
    G_TOOLBAR-ICON = ICON_SYSTEM_SAVE.
    G_TOOLBAR-BUTN_TYPE = 0.
    G_TOOLBAR-QUICKINFO = 'Save the Customer'(203).
    APPEND G_TOOLBAR TO E_OBJECT->MT_TOOLBAR.
ENDMETHOD.                    "HANDLE_TOOLBAR
Hope this helps.
Gary.
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Apr 7, 2008 5:41 PM

Control User Specific button in ALV report

Hi,
Can anybody please suggest me how to control "USER SPECIFIC" button in ALV report layout using authorization object. I mean if you can tell me which authorization object is responsible to control the "USER SPECIFIC" button.

additional info to what Lakshmi already said:-
normally the restrictions for saving layouts/display variants are done at 2 levels:
1) The developer of an ALV list first predetermines the authorization in the 'i_save' parameter within the code.
I_SAVE = ' '     -
layouts cannot be saved
I_SAVE = 'A'   -
user-specific and cross-user layouts can be saved
I_SAVE = 'X'   --- cross-user layouts can be saved
I_SAVE = 'U' --- user-specific layouts can be saved
2) The second level comes to us restriciting the S_ALV_LAYO which gives access to users to save global layouts if I_SAVE for that particular transaction is A or X.
for example, a report has I_SAVE= 'A', which means
it will allow to save User-specific layouts without any restrictions.
and if user has S_ALV_LAYO then he can save both User-Specific and Global Layouts(variants).
it would be better to keep this object separate.

Button in ALV Report

Hi All,
I want to know how to create a button in alv report .
Please respond to my query.
Thanks and Regards,
Aman

hi aman,
u can try this example:
where i have a created a button:
*& Report Z_GURU_ALV_EVENT01                                          *
report z_guru_alv_event01                      .
tables: mara, makt.
type-pools slis.
data: begin of imara occurs 0,
        matnr like mara-matnr,
        ernam like mara-ernam,
        ersda like mara-ersda,
      end of imara.
data: begin of imakt occurs 0,
        matnr like mara-matnr,
        spras like makt-spras,
        maktx like makt-maktx,
      end of imakt.
data: ffc type slis_t_fieldcat_alv,
      ievents type slis_t_event with header line,
      iievent type slis_t_event with header line.
select-options: s_matnr for mara-matnr.
initialization.
call function 'REUSE_ALV_EVENTS_GET'
exporting
   i_list_type           = 0
importing
   et_events             = ievents[]
EXCEPTIONS
LIST_TYPE_WRONG       = 1
OTHERS                = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
read table ievents with key name = slis_ev_top_of_page.
ievents-form = 'TOPP'.
modify ievents transporting form where name = slis_ev_top_of_page.
clear ievents.
read table ievents with key name = slis_ev_user_command.
ievents-form = 'USR_COM'.
modify ievents transporting form where name = slis_ev_user_command.
clear ievents.
read table ievents with key name = slis_ev_pf_status_set.
ievents-form = 'PFSTAT'.
modify ievents transporting form where name = slis_ev_pf_status_set.
clear ievents.
call function 'REUSE_ALV_EVENTS_GET'
exporting
   i_list_type           = 0
importing
   et_events             = iievent[]
EXCEPTIONS
LIST_TYPE_WRONG       = 1
OTHERS                = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
read table iievent with key name = slis_ev_pf_status_set.
iievent-form = 'PFSTAT'.
modify iievent transporting form where name = slis_ev_pf_status_set.
clear iievent.
read table iievent with key name = slis_ev_user_command.
iievent-form = 'USERCOM'.
modify iievent transporting form where name = slis_ev_user_command.
clear iievent.
start-of-selection.
select matnr ernam ersda from mara into table imara where matnr
in s_matnr.
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
exporting
   i_program_name               = sy-repid
   i_internal_tabname           = 'IMARA'
I_STRUCTURE_NAME             =
I_CLIENT_NEVER_DISPLAY       = 'X'
   i_inclname                   = sy-repid
I_BYPASSING_BUFFER           =
I_BUFFER_ACTIVE              =
changing
    ct_fieldcat                  = ffc
EXCEPTIONS
INCONSISTENT_INTERFACE       = 1
PROGRAM_ERROR                = 2
OTHERS                       = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
   i_callback_program                = sy-repid
I_CALLBACK_PF_STATUS_SET          = ' '
I_CALLBACK_USER_COMMAND           = ' '
   i_callback_top_of_page            = 'ALV_BACKGROUND'
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
   i_callback_html_end_of_list       = 'ALV_BACKGROUND'
I_STRUCTURE_NAME                  =
   i_background_id                   = 'ALV_BACKGROUND'
I_GRID_TITLE                      =
I_GRID_SETTINGS                   =
IS_LAYOUT                         =
   it_fieldcat                       = ffc
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
IT_SORT                           =
IT_FILTER                         =
IS_SEL_HIDE                       =
I_DEFAULT                         = 'X'
I_SAVE                            = ' '
IS_VARIANT                        =
   it_events                         = ievents[]
IT_EVENT_EXIT                     =
IS_PRINT                          =
IS_REPREP_ID                      =
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
IT_ALV_GRAPHICS                   =
IT_HYPERLINK                      =
IT_ADD_FIELDCAT                   =
IT_EXCEPT_QINFO                   =
I_HTML_HEIGHT_TOP                 =
I_HTML_HEIGHT_END                 =
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
tables
    t_outtab                          = imara
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
form topp.
data: it_top type slis_t_listheader,"having s , h ,a
       wa type slis_listheader.
      IT_SPEC TYPE SLIS_T_SPECIALCOL_ALV,
      WA1 TYPE SLIS_SPECIALCOL_ALV.
wa-typ = 'H'.
wa-info = 'RELIANCE GLOBAL SERVICES' .
append wa to it_top.
clear wa.
wa-typ = 'S'.wa-key = 'NO:23'.
wa-info = 'TRIPLICANE HIGH ROAD'.
append wa to it_top.
clear wa.
wa-typ = 'S'.
wa-info = 'TRIPLICANE'.
append wa to it_top.
clear wa.
wa-typ = 'A'.
wa-info = 'sample'.
append wa to it_top.
clear wa.
call function 'REUSE_ALV_COMMENTARY_WRITE'
   exporting
     it_list_commentary       = it_top
    i_logo                   = 'ENJOYSAP_LOGO'
   I_END_OF_LIST_GRID       =
   I_ALV_FORM               =
endform.
form usr_com using r_ucomm type sy-ucomm r_selfield type slis_selfield.
case r_ucomm.
when 'CANC'.
leave to screen 0.
endcase.
data: ff type slis_t_fieldcat_alv.
data: v_vbeln(18) type n.
v_vbeln = r_selfield-value.
select matnr spras maktx
from makt into table imakt
up to 10 rows
where matnr = v_vbeln.
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
exporting
   i_program_name               = sy-repid
   i_internal_tabname           = 'IMAKT'
I_STRUCTURE_NAME             =
I_CLIENT_NEVER_DISPLAY       = 'X'
   i_inclname                   = sy-repid
I_BYPASSING_BUFFER           =
I_BUFFER_ACTIVE              =
changing
    ct_fieldcat                  = ff
EXCEPTIONS
INCONSISTENT_INTERFACE       = 1
PROGRAM_ERROR                = 2
OTHERS                       = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
   i_callback_program                = sy-repid
I_CALLBACK_PF_STATUS_SET          = ' '
I_CALLBACK_USER_COMMAND           = ' '
I_CALLBACK_TOP_OF_PAGE            = ' '
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
I_GRID_TITLE                      =
I_GRID_SETTINGS                   =
IS_LAYOUT                         =
   it_fieldcat                       = ff
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
IT_SORT                           =
IT_FILTER                         =
IS_SEL_HIDE                       =
I_DEFAULT                         = 'X'
I_SAVE                            = ' '
IS_VARIANT                        =
   it_events                         = iievent[]
IT_EVENT_EXIT                     =
IS_PRINT                          =
IS_REPREP_ID                      =
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
I_HTML_HEIGHT_TOP                 = 0
I_HTML_HEIGHT_END                 = 0
IT_ALV_GRAPHICS                   =
IT_HYPERLINK                      =
IT_ADD_FIELDCAT                   =
IT_EXCEPT_QINFO                   =
IR_SALV_FULLSCREEN_ADAPTER        =
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
tables
    t_outtab                          = imakt
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. "USR_COM
form pfstat using extab type slis_t_extab.
set pf-status 'STD' excluding extab.
endform. " pfstat
form usercom using rucom type sy-ucomm rselfield type slis_selfield.
case rucom.
when 'CANC'.
leave to screen 0.
endcase.
data: ffc type slis_t_fieldcat_alv,
      v_matnr(18) type n.
v_matnr = rselfield-value.
select matnr ernam ersda from mara into table imara
where matnr = v_matnr.
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
exporting
   i_program_name               = sy-repid
   i_internal_tabname           = 'IMARA'
I_STRUCTURE_NAME             =
I_CLIENT_NEVER_DISPLAY       = 'X'
   i_inclname                   = sy-repid
I_BYPASSING_BUFFER           =
I_BUFFER_ACTIVE              =
changing
    ct_fieldcat                  = ffc
EXCEPTIONS
INCONSISTENT_INTERFACE       = 1
PROGRAM_ERROR                = 2
OTHERS                       = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
   i_callback_program                = sy-repid
I_CALLBACK_PF_STATUS_SET          = ' '
I_CALLBACK_USER_COMMAND           = ' '
I_CALLBACK_TOP_OF_PAGE            = ' '
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
I_GRID_TITLE                      =
I_GRID_SETTINGS                   =
IS_LAYOUT                         =
   it_fieldcat                       = ffc
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
IT_SORT                           =
IT_FILTER                         =
IS_SEL_HIDE                       =
I_DEFAULT                         = 'X'
I_SAVE                            = ' '
IS_VARIANT                        =
   it_events                         = iievent[]
IT_EVENT_EXIT                     =
IS_PRINT                          =
IS_REPREP_ID                      =
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
IT_ALV_GRAPHICS                   =
IT_HYPERLINK                      =
IT_ADD_FIELDCAT                   =
IT_EXCEPT_QINFO                   =
I_HTML_HEIGHT_TOP                 =
I_HTML_HEIGHT_END                 =
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
tables
    t_outtab                          = imara
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.

How to give push button in alv report output

hi,
my requirement is that , i have to give push button in alv report output(item level) not in application toolbar, i am using reuse_alv_grid_display FM, can any body provide me sample code
regards,
siva kumar

have a look at this thread, also has a sample report at the end from Uwe Schieferstein.
[button on alv list|How to add and program a pushbutton on ALV grid line;
seems not to work try this:
How to add and program a pushbutton on ALV grid line
Edited by: Micky Oestreich on May 15, 2008 10:20 PM

Add buttons in ALV Report output

Dear Friends,
I am developing one ALV report in PP moule for calculating Shelf Life. The output is coming properly in ALV.
But my additional requirement is ADD coustomise buttons in ALV Reports.
Please give me an idea how can I insert buttons in my alv report?
Thanks & Regards
Vasu

Hi vasu,
consider the code given below.
      FORM F4200_PF_STATUS_SET                                      *
FORM f4200_pf_status_set USING i_extab TYPE slis_t_extab.
REFRESH i_extab.
PERFORM f4210_exclude_fcodes CHANGING i_extab.
The PF status is an exact copy of the PF status 'STANDARD' of program
SAPLSALV but with command 'CHNG' added to it.
SET PF-STATUS 'ZSOM_STANDARD' EXCLUDING i_extab.
ENDFORM.
*&      Form f4210_exclude_fcodes
FORM f4210_exclude_fcodes USING i_extab TYPE slis_t_extab.
DATA: ws_fcode TYPE slis_extab.
CLEAR ws_fcode.
ws_fcode = '&EB9'.            " Call up Report.
APPEND ws_fcode TO i_extab.
ws_fcode = '&ABC'.            " ABC Analysis.
APPEND ws_fcode TO i_extab.
ws_fcode = '&NFO'.            " Info Select.
APPEND ws_fcode TO i_extab.
ws_fcode = '&LFO'.            " Information.
APPEND ws_fcode TO i_extab.
ENDFORM.                    " f4210_exclude_fcodes
*&      Form f4300_user_command
FORM f4300_user_command USING ucomm LIKE sy-ucomm
                                         selfield TYPE slis_selfield.
CASE ucomm.
    WHEN '&IC1'.                              "Double Click line Item
      READ TABLE i_data INDEX selfield-tabindex.
      IF i_data-qmnum NE space.
        SET PARAMETER ID 'IQM' FIELD i_data-qmnum.
        CALL TRANSACTION 'IW52' AND SKIP FIRST SCREEN.
        CLEAR ucomm.
      ENDIF.
    WHEN 'CHNG'.                          " Change Notification Icon
      READ TABLE i_data INDEX selfield-tabindex.
      IF i_data-qmnum NE space.
        SET PARAMETER ID 'IQM' FIELD i_data-qmnum.
        CALL TRANSACTION 'IW52' AND SKIP FIRST SCREEN.
      CLEAR ucomm.
      ENDIF.
ENDCASE.
CLEAR ucomm.
ENDFORM.                    " f4300_user_command
EXPLANATION
In this program, first we created a PF status (ZSOM_STANDARD), which was an exact copy of STANDARD of program SAPLSALV through transaction SE41 (Menu Painter). Then we added another button to it,with a new fcode called CHNG. After this this we set this PF status instead of STANADRD.
We initialize a third event USER_COMMAND and associate a form with it. In this form we can capture the function codes and write any functionality under it. If we write functionality for an existing fcode, then this gets precedence over the default functionality that might be associated with it.
In this example, we capture a standard fcode &IC1 that is nothing but double clicking a line of the report. We are capturing the notification number of that line and calling transaction IW52 with it. We are also doing the same when a user clicks on the new Change Notification button.
When the user clicks the Back button in IW52, it comes back to the report.
Please reward for the same.
Message was edited by: Prakhar Saxena

In popup step how do I get the "text on the button" in the report rather than button index?

(1)
How do I configure the POPUP step in "SEQ MAIN.seq" to execute the second
step (IS OUT PUT IS 20?) in "SEQ 1.seq" when "IS OUT PUT IS 20?" button
hit and execute the third step (IS OUT PUT IS 30?) in "SEQ 1.seq" when "IS
OUT PUT IS 30?" button hit.
(2)
In popup step how do I get the "text on the button" in the report rather than button index?
File attached
Attachments:
test_stand.zip ‏32 KB

The handle to the Step.Button1Label gets you the data, but there are several ways to get it into the actual report.
The easiest is to use the reporttext.
In a post expression, you can use something like
Step.Result.ReportText = Evaluate("Step.Button" + Str(Step.Result.ButtonHit) +"Label")
and then the default report generation will include it in the report. Otherwise, you need to get the text into the Resultlist by various means (check the user manual, or the TestStand II customisation course) and handle the report generation yourself inside of the appropriate sequence in the process model.
Just my 2cents
S.
// it takes almost no time to rate an answer
Attachments:
IncludeButtonTextInReport2_0.seq ‏18 KB

Button in Interactive Report

Hi Friends,
I want to add Button in Interactive report for each row. Is it possible to add a button.Please help me.

You should add a dummy column in your report query. Make dummy column as a link and change the column attribute 'Column Link' to and image. For instance the Edit column in the following query is a button on my report.
select
'Edit',
"CUST_NO",
"CUST_FIRST_NAME",
"CUST_LAST_NAME",
"CUST_ADDRESS",
"CUST_CONTACT_PHONE_NO"
from "CUSTOMER"

How can we place a push button in ALV report

hi
could anybody inform me
how can we place a push button in ALV report
thanx
regards
kals.

Hi kals.
please have a look at demoprogram
SALV_DEMO_TABLE_FUNCTIONS
BCALV_GRID_05
Regards
Bernd

How to create user defined button in alv report

how to create user defined button in alv report
thnks in advance.

Hi,
U can define it the the PF-STATUS ( Menu for ALV ).
For that u have to define it in the EVENTCAT.
form z_eventcat using    p_i_eventcat type slis_t_event.
data: i_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
    exporting
      i_list_type     = 0
    importing
      et_events       = p_i_eventcat
    exceptions
      list_type_wrong = 1
      others          = 2.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
clear i_event.
read table p_i_eventcat with key name = slis_ev_top_of_page into
i_event.
if sy-subrc = 0.
    move 'TOP_OF_PAGE' to i_event-form.
    append i_event to p_i_eventcat.
endif.
read table p_i_eventcat with key name = slis_ev_pf_status_set into i_event.
if sy-subrc = 0.
    move 'SET_PF_STATUS' to i_event-form.
    append i_event to p_i_eventcat.
endif.
clear i_event.
read table p_i_eventcat into i_event with key name = slis_ev_user_command .
if sy-subrc = 0.
    move 'USER_COMMAND' to i_event-form.
    append i_event to p_i_eventcat.
endif.
And in the DISPLAY
call function 'REUSE_ALV_GRID_DISPLAY'
   exporting
     i_callback_program                = v_progname
     i_callback_pf_status_set          = 'SET_PF_STATUS'
     i_callback_user_command           = 'USER_COMMAND'
     i_callback_top_of_page            = 'TOP_OF_PAGE'
     i_grid_title                      = v_gridtitle
     i_save                            = 'A'
     is_layout                         = i_layout
     it_fieldcat                       = i_fieldcat[]
     it_sort                           = i_sortinfo
     it_events                         = i_eventcat
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
    tables
      t_outtab                          = it_final
   exceptions
     program_error                     = 1
     others                            = 2
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
*MENU SETTINGS.
form set_pf_status using rt_extab type slis_t_extab.
set pf-status 'ALV_MENU'.
endform.                    "SET_PF_STATUS
endform.                    " Z_EVENTCAT
Now double click on ALV MENU nad u can create a button in the application bar.
Regards,
Pritha.

Radio button in alv report

Hi experts,
I am using radio buttons in alv report by using screen painter but error occurs in alv that screen doesn't exist in module.
plz help me.

Hi Ankita,
check this program.
*& Report ZALVGRID_WITH_RADIOBUTTONS
*& This program shows how to realize radiobuttons in ALV grid lists
*& using event HOTSPOT_CLICK.
*& Screen 100:
*& - Flow logic
*& PROCESS BEFORE OUTPUT.
*& MODULE PBO.
*& PROCESS AFTER INPUT.
*& MODULE PAI.
*& - Screen elements: none
*& - ok-code field -> gd_okcode
*& GUI Status MAIN100:
*& - F3 = 'BACK', Shift+F3 = 'EXIT', F12 = 'CANC'
PROGRAM zalvgrid_with_radiobuttons.
TYPE-POOLS: abap, icon. " INCLUDE . for releases < 6.20
TYPES: BEGIN OF ty_s_sflight.
INCLUDE TYPE sflight.
TYPES: button1 TYPE iconname.
TYPES: button2 TYPE iconname.
TYPES: button3 TYPE iconname.
TYPES: button4 TYPE iconname.
TYPES: END OF ty_s_sflight.
DATA:
gt_sflight TYPE STANDARD TABLE OF ty_s_sflight,
gs_layout TYPE lvc_s_layo,
gt_fcat TYPE lvc_t_fcat.
DATA:
gd_okcode TYPE ui_func,
go_docking TYPE REF TO cl_gui_docking_container,
go_grid TYPE REF TO cl_gui_alv_grid.
CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
CLASS-METHODS:
handle_hotspot_click FOR EVENT hotspot_click OF cl_gui_alv_grid
IMPORTING
e_row_id
e_column_id
es_row_no
sender.
ENDCLASS. "lcl_eventhandler DEFINITION
CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_hotspot_click.
define local data
FIELD-SYMBOLS:
IS ASSIGNED ).
Set all radio buttons "unselected"
IS ASSIGNED ).
Set selected radio button "selected".
= icon_wd_radio_button.
ENDIF.
Force PAI followed by refresh of table display in PBO
CALL METHOD cl_gui_cfw=>set_new_ok_code
EXPORTING
new_code = 'REFRESH'
IMPORTING
RC =
ENDMETHOD. "handle_hotspot_click
ENDCLASS. "lcl_eventhandler IMPLEMENTATION
MAIN *
START-OF-SELECTION.
PERFORM select_data.
PERFORM init_controls.
PERFORM build_fieldcatalog.
PERFORM set_layout.
CALL METHOD go_grid->set_table_for_first_display
EXPORTING
i_structure_name = 'SFLIGHT'
is_layout = gs_layout
CHANGING
it_fieldcatalog = gt_fcat
it_outtab = gt_sflight.
Link docking container to dynpro
CALL METHOD go_docking->link
EXPORTING
repid = syst-repid
dynnr = '0100'
CONTAINER =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
lifetime_dynpro_dynpro_link = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL SCREEN 100.
END-OF-SELECTION.
MODULE PBO OUTPUT *
MODULE pbo OUTPUT.
SET PF-STATUS 'MAIN100'.
SET TITLEBAR 'MAIN100'.
ENDMODULE. "PBO OUTPUT
MODULE PAI INPUT *
MODULE pai INPUT.
Leave report
CASE gd_okcode.
WHEN 'BACK' OR
'EXIT' OR
'CANC'.
SET SCREEN 0. LEAVE SCREEN.
Refresh table display
WHEN 'REFRESH'.
PERFORM refresh_display.
WHEN OTHERS.
do nothing
ENDCASE.
CLEAR gd_okcode.
ENDMODULE. "PAI INPUT
*& Form BUILD_FIELDCATALOG
text
--> p1 text
<-- p2 text
FORM build_fieldcatalog .
ALV List with Radio Buttons
SAP DEVELOPER NETWORK | sdn.sap.com BUSINESS PROCESS EXPERT COMMUNITY | bpx.sap.com
© 2007 SAP AG 7
define local data
DATA:
ls_fcat TYPE lvc_s_fcat.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
I_BUFFER_ACTIVE =
i_structure_name = 'ICON'
I_CLIENT_NEVER_DISPLAY = 'X'
I_BYPASSING_BUFFER =
I_INTERNAL_TABNAME =
CHANGING
ct_fieldcat = gt_fcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
DELETE gt_fcat WHERE ( fieldname <> 'NAME' ).
NOTE: field ICON-NAME has data element ICONNAME.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
I_BUFFER_ACTIVE =
i_structure_name = 'SFLIGHT'
I_CLIENT_NEVER_DISPLAY = 'X'
I_BYPASSING_BUFFER =
I_INTERNAL_TABNAME =
CHANGING
ct_fieldcat = gt_fcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE gt_fcat INTO ls_fcat
WITH KEY fieldname = 'NAME'.
IF ( syst-subrc = 0 ).
DELETE gt_fcat INDEX syst-tabix.
ENDIF.
ls_fcat-fieldname = 'BUTTON4'.
ls_fcat-coltext = ls_fcat-fieldname.
ls_fcat-icon = 'X'.
ls_fcat-hotspot = 'X'.
INSERT ls_fcat INTO gt_fcat INDEX 5.
ls_fcat-fieldname = 'BUTTON3'.
ls_fcat-coltext = ls_fcat-fieldname.
INSERT ls_fcat INTO gt_fcat INDEX 5.
ls_fcat-fieldname = 'BUTTON2'.
ls_fcat-coltext = ls_fcat-fieldname.
INSERT ls_fcat INTO gt_fcat INDEX 5.
ls_fcat-fieldname = 'BUTTON1'.
ls_fcat-coltext = ls_fcat-fieldname.
INSERT ls_fcat INTO gt_fcat INDEX 5.
Renumbering of the columns
LOOP AT gt_fcat INTO ls_fcat.
ls_fcat-col_pos = syst-tabix.
MODIFY gt_fcat FROM ls_fcat INDEX syst-tabix.
ENDLOOP.
ENDFORM. " BUILD_FIELDCATALOG
*& Form SELECT_DATA
text
--> p1 text
<-- p2 text
FORM select_data .
define local data
DATA:
ls_sflight TYPE ty_s_sflight.
SELECT * FROM sflight INTO CORRESPONDING FIELDS OF TABLE gt_sflight.
ls_sflight-button1 = icon_wd_radio_button. " selected radiobutton
ls_sflight-button2 = icon_wd_radio_button_empty.
ls_sflight-button3 = icon_wd_radio_button_empty.
ls_sflight-button4 = icon_wd_radio_button_empty.
Alternatively: create icons using function module 'ICON_CREATE'
on SAP releases where these icons are not available.
MODIFY gt_sflight FROM ls_sflight
TRANSPORTING button1 button2 button3 button4
WHERE ( carrid IS NOT INITIAL ).
ENDFORM. " SELECT_DATA
*& Form INIT_CONTROLS
text
--> p1 text
<-- p2 text
FORM init_controls .
CHECK ( go_docking IS NOT BOUND ).
ALV List with Radio Buttons
SAP DEVELOPER NETWORK | sdn.sap.com BUSINESS PROCESS EXPERT COMMUNITY | bpx.sap.com
© 2007 SAP AG 9
Create docking container
CREATE OBJECT go_docking
EXPORTING
parent = cl_gui_container=>screen0
REPID =
DYNNR =
SIDE = DOCK_AT_LEFT
EXTENSION = 50
STYLE =
LIFETIME = lifetime_default
CAPTION =
METRIC = 0
ratio = 90
NO_AUTODEF_PROGID_DYNNR =
NAME =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Size of container = full screen size
CALL METHOD go_docking->set_extension
EXPORTING
extension = 99999
EXCEPTIONS
cntl_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Create ALV grid instance
CREATE OBJECT go_grid
EXPORTING
I_SHELLSTYLE = 0
I_LIFETIME =
i_parent = go_docking
I_APPL_EVENTS = space
I_PARENTDBG =
I_APPLOGPARENT =
I_GRAPHICSPARENT =
I_NAME =
I_FCAT_COMPLETE = SPACE
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Set event handler for event HOTSPOT_CLICK
SET HANDLER:
lcl_eventhandler=>handle_hotspot_click FOR go_grid.
ENDFORM. " INIT_CONTROLS
*& Form REFRESH_DISPLAY
Refresh table display after switching the radiobuttons
--> p1 text
<-- p2 text
FORM refresh_display .
define local data
DATA:
ls_stable TYPE lvc_s_stbl.
ls_stable-row = abap_true.
ls_stable-col = abap_true.
CALL METHOD go_grid->refresh_table_display
EXPORTING
is_stable = ls_stable
I_SOFT_REFRESH =
EXCEPTIONS
finished = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " REFRESH_DISPLAY
*& Form SET_LAYOUT
Set layout for ALV list
--> p1 text
<-- p2 text
FORM set_layout .
CLEAR: gs_layout.
gs_layout-cwidth_opt = abap_true. " optimize column width
gs_layout-zebra = abap_true.
ENDFORM. " SET_LAYOUT
Regards,
Prasanth
Reward if helpful

Print button on Web report.

Hi gurus,
We were trying to add a print button on Web report for printing the result area on the Web report.
We followed the steps which has given in the How-to-guide How To Web Printing with Microsoft
Excel document.
In the document it has mentioned that
1. Support package should be above 19 for BW 3.5 version
2. Add HTML code in the WAD Template
3. Import Transport file into the System.
4. Apply OSS notes 736568 and 737082 to BW
We upgraded the support package to 22, added the html code in the WAD template, imported the transport file into the BW system and applied the OSS notes as per the mentioned in the document.
The transport file contains the Package u201CZPK_WEB_PRINTING_WITH_EXCELu201D and ABAP Classes u201CZCL_RSR_XLS_GRIDu201D,
u201CZCL_RSR_XLS_HELP_WINDOW_PRINTu201D,
u201CZCL_RSR_XLS_ITEM_CONDITIONu201D,
u201CZCL_RSR_XLS_ITEM_EXCEPTIONu201D,
u201CZCL_RSR_XLS_ITEM_GRIDu201D,
u201CZCL_RSR_XLS_ITEM_TEMPLATEu201D,
u201CZCL_RSR_XLS_ITEM_TEXT_ELEMENTSu201D,
u201CZCL_RSR_XLS_TABLEu201D
After import the transport file into BW, some of the objects in the ABAP Classes were not activated. I was trying to activate manually but those were not activating.
Please guide me how to resolve the above issue or is there any way to get the printing the web report?
Thanks in advance.
Venkata.

Hi
If you want to print the web page directly then you can define a button using Java script and you can do it.
Define java script code to print the page
for ex define a button and call function for print.
i cannot attach the code. but you can solve with java script
Regards
M.A
Edited by: M.A on Jul 24, 2008 4:22 PM

Hiding button in me28 report

Similar Messages

Maybe you are looking for