Hiding programs....help????

iphoto is hiding from me, when i click f3 it shows up as open but when i click on it the program hides, when i swipe with four fingers it comes up, but i can't have it open on my screen...help please??? how do i get this to stop????
it is opening, it's just hiding. unless i go into full screen mode i can't use it and even then only some features work.....
it's responding fine. everything's working the program is just hidden
i also have completely quit everything and shut down my computer and turned it back on again and that doesn't help either.

This has happened to me before. Try to hide all of the other applications then see if you can view it. If that doesn't help quit iPhoto and relaunch it. And if that doesn't help delete the cache files ~/Library/Caches. Finally, open ~/Library/Preferences/com.apple.iPhoto.plist and move it to the trash. Note: You should quit iPhoto before deleting either of the files or it won't work right.
The application could be not responding. Press command-option-esc and in the window that comes up it will display which applications are not responding.
Chris

Similar Messages

When i open itunes its normal and then out of nowhere it says "itunes has stopped working" and i have to click 'close program'. help?

when i open itunes its normal and then out of nowhere it says "itunes has stopped working" and i have to click 'close program'. help?

Having the same issue here....a quick fix is to just minimize the window, and immediately maximize it. It will now fit the screen. Trouble is, after you close it, you'll have to do it again when you re-start itunes. The good news is it takes all of about 2 seconds. Apple should fix this. Should.

Programming help - how to get the read-only state of PDF file is windows explorer preview is ON?

Programming help - how to get the read-only state of PDF file is windows explorer preview is ON?
I'm developing an application where a file is need to be saved as pdf. But, if there is already a pdf file with same name in the specified directory, I wish to overwrite it. And in the overwrite case, read-only files should not be overwritten. If the duplicate(old) file is opened in windows (Win7) explorer preview, it is write protected. So, it should not be overwritten. I tried to get the '
FILE_ATTRIBUTE_READONLY' using MS API 'GetFileAttributes', but it didn't succeed. How Adobe marks the file as read-only for preview? Do I need to check some other attribute of the file?
Thanks!

Divya - I have done it in the past following these documents. Please read it and try it it will work.
Please read it in the following order since both are a continuation documents for the same purpose (it also contains how to change colors of row dynamically but I didnt do that part I just did the read_only part as your requirement)
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0625002-596c-2b10-46af-91cb31b71393
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0155eb5-b6ce-2b10-3195-d9704982d69b?quicklink=index&overridelayout=true
thanks!
Jason PV

Freely Programmed help in Pop Up Window

Hi,
Is it possible to display the data of freely programmed help in the pop up window.
Thanks
Raghavendra

Hi Thomas,
I agree that by using Freely Programmed help the data will be displayed in a seperate window. I want to display the data in a window( of type Pop Up) because i am displaying table control with 3 fields on clicking f4 and it has 2 buttons Ok and Cancel. But if there are 50 entries the user needs to scroll down to click on Ok. If the window is of type pop up Ok button will be embedded in the window instead of on view.
Thanks
Raghavendra

Freely programmed help in ALV

   HI:ALL
      How to achieve Freely programmed help in ALV？

Hi,
On APPLY buttton action, write the below code
*Fire the event to indicate that data selection is done
wd_comp_controller->fire_vh_data_selected_evt( ).
wd_comp_controller->value_help_listener->close_window( ).
*Raise Event
   cl_fpm_factory=>get_instance( )->raise_event_by_id( EXPORTING   iv_event_id   = '<custom event name>').
And in PROCESS_EVENT of your webdynpro component(where Freely Programmed search help is implemented) write the code as per your requirement to set the values back to the table.
CASE IO_EVENT->MV_EVENT_ID.
          WHEN '<CUSTOM EVENT NAME>'.
                    write code as per your requirement.
ENDCASE.
Thanks
KH

N95 Maps Program Help and Suggestions Anybody??

N95 Maps Program Help and Suggestions Anybody??
havnt updated to firmware v12 yet
Why can't I search my Address or Current Location and then save this as HOME or say my Start_Point_01?
I have managed to save my HOME as a PEOPLE LOCATION and my friends address etc and worked out
how to plan a route etc, BUT Maps GPS POSITION thinks I live 20 miles away??
I dont seem to be able to simply set my HOME or Current Location myself,
I have seen some Satelite activity but insists I live 20 miles away :/ how do I fix this,
it's realy annoying. any handy tips people??
cant upgrade firmware as need phone plugged into wall socket
at webcafe, will have to wait for firmware :/
N95-1 (8GB-MicroSD),LCG-Audio,Fring,Nimbuzz,Skype,Youtube,iPlayer,Garmin4-GPS.Googlemaps,SkyFire,ZoneTag,Gravity, Sennheiser CX-400-IIs,500-IIs,TR-120 Wireless,HD215'S.AudioTechnica ATX-M50's.BT B-Tube BT Speaker.

The least problems you'll have with miniDV cameras. About any miniDV camera will connect to a Mac via Firewire. HDD cameras are an open invitation to trouble, especially as you speak of older computers.
There are well-featured models out there now for 2-300 bucks. But watch out for cameras that connect to the computer via a dock. I had two Sony with these @#$% docking stations .... both docks broke and rendered the cameras useless for capturing. replacing the dock was nearly the price of a new cam.

What Is Wrong With My Program Help

This Is The Assignment I Have To Do:
Write a Java program that prints a table with a list of at least 5 students together with their grades earned (lab points, bonus points, and the total) in the format below.
== Student Points ==
Name Lab Bonus Total
Joe 43 7 50
William 50 8 58
Mary Sue 39 10 49
The requirements for the program are as follows:
1.     Name the project StudentGrades.
2.     Print the border on the top as illustrated (using the slash and backslash characters).
3.     Use tab characters to get your columns aligned and you must use the + operator both for addition and string concatenation.
4.     Make up your own student names and points -- the ones shown are just for illustration purposes. You need 5 names.
This Is What I Have So Far:
* Darron Jones
* 4th Period
* ID 2497430
*I recieved help from the internet and the book
*StudentGrades
public class StudentGrades
     public static void main (String[] args )
System.out.println("///////////////////\\\\\\\\\\\\\\\\\\");
System.out.println("==          Student Points          ==");
System.out.println("\\\\\\\\\\\\\\\\\\\///////////////////");
System.out.println("                                      ");
System.out.println("Name            Lab     Bonus   Total");
System.out.println("----            ---     -----   -----");
System.out.println("Dill             43      7       50");
System.out.println("Josh             50      8       58");
System.out.println("Rebbeca          39      10      49");When I Compile It Keeps Having An Error Thats Saying: "Illegal Escape Character" Whats Wrong With The Program Help Please

This will work exactly as you want it to be....hope u like it
     public static void main(String[] args)
          // TODO Auto-generated method stub
          System.out.print("///////////////////");
          System.out.print("\\\\\\\\\\\\\\\\\\\\\\\\");
          System.out.println("\\\\\\\\\\\\\\");
          System.out.println("== Student Points ==");
          System.out.print("\\\\\\\\\\\\\\");
          System.out.print("\\\\\\\\\\\\");
          System.out.print("\\\\\\\\\\\\");
          System.out.print("///////////////////");
          System.out.println(" ");
          System.out.println("Name Lab Bonus Total");
          System.out.println("---- --- ----- -----");
          System.out.println("Dill 43 7 50");
          System.out.println("Josh 50 8 58");
          System.out.println("Rebbeca 39 10 49");
     }

Freely Programed Help for select-option field

Hi,
how can i set freely programmed help for select option field, i mean while adding selection field what are the parameters that are important for freely programmed help.
i have implemented iwd_value_help in one component comp1 and declared the usage of comp1 in comp2 where i actually defined the usage of select-option component.
i used parameter i_value_help_type = if_wd_value_help_handler=>co_prefix_appldev while adding selection field, however when i presss F4 icon, the following message is coming
View WD_VALUE_HELP does not exist within the component WDR_SELECT_OPTIONS
Please suggest where i am doing wrong??
Edited by: kranthi kumar on Dec 29, 2010 6:19 PM

>
kranthi kumar wrote:
> Hi,
>
> how can i set freely programmed help for select option field, i mean while adding selection field what are the parameters that are important for freely programmed help.
>
> i have implemented iwd_value_help in one component comp1 and declared the usage of comp1 in comp2 where i actually defined the usage of select-option component.
>
> i used parameter i_value_help_type = if_wd_value_help_handler=>co_prefix_appldev while adding selection field, however when i presss F4 icon, the following message is coming
>
> View WD_VALUE_HELP does not exist within the component WDR_SELECT_OPTIONS
>
> Please suggest where i am doing wrong??
>
> Edited by: kranthi kumar on Dec 29, 2010 6:19 PM
Hi Kranthi,
Please help me to understand your design.
Why would you like to create a Freely programmed value help for select-option?. why not use wdr_select_option directly ?

Why i cant open the ae after i download ~then pop up something like ae error, crash in program~help~pls

why i cant open the ae after i download ~then pop up something like ae error, crash in program~help~pls

I recently updated my iTunes to version 10.3.1.55 and when i launch the program it says 'iTunes has stopped working' then another window pop up saying me to close program.HELP!!! ME PLEASE!!

ok i installed new iTunes version 10.3.1.55 and when i launch itunes it says 'iTunes has stopped working' i get to my problem history this is whay i found
Problem signature
Problem Event Name:          APPCRASH
Application Name:          iTunes.exe
Application Version:          10.3.1.55
Application Timestamp:          4deec351
Fault Module Name:          MediaToolbox.dll
Fault Module Version:          1.0.694.7
Fault Module Timestamp:          4ddeb575
Exception Code:          c0000005
Exception Offset:          00250000
OS Version:          6.0.6002.2.2.0.768.3
Locale ID:          1033
Additional Information 1:          fd00
Additional Information 2:          ea6f5fe8924aaa756324d57f87834160
Additional Information 3:          fd00
Additional Information 4:          ea6f5fe8924aaa756324d57f87834160
PLEASE HELP ME!!!!

Fault Module Name:          MediaToolbox.dll
Fault Module Version:          1.0.694.7
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more. Itunes starts but before anything loads a window pops up saying that the prograam has encountered a problem and sh...

Links in Windows (7, 64-bit) doesn't open, getting error:" [link] Can't find the program", help!?

Everytime I click a link that's not in the actual browser window, could be from a word doc, pdf-file or just plain info link in windows gadgets, I get an error:
[Clicked link]
Can't find the program
I have:
Windows 7 64-bit
Firefox 4 RC 1
Firefox is standard browser and installed at default location.
please help, it's getting really annoying!!

This is what I get when opening a link from Outlook 2010.
Windows 7 64bit
Firefox 4 RC
Firefox 4 is set as the default browser
Links won't open in FF4 from any external programs (tweetdeck, outlook, word, etc.)

VIRUS in my Mac BOOK .. When I bought my mac book 6 months ago, everything was perfect.. but then when I open some webpage..it comes a lot of ads or pages unsafe .. that before it didn't appear.. I don't know if have to download a anti virus program.HELP

VIRUS in my Mac BOOK .. When I bought my mac book 6 months ago, everything was perfect.. but then when I open some webpage..it comes a lot of ads or pages unsafe .. that before it didn't appear.. I don't know if have to download a anti virus program.HELP

Not a virus, but it is malware: The Safe Mac » Search Results » adware removal.
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
          Mac OS X Snow Leopard and malware detection
          OS X Lion- Protect your Mac from malware
          OS X Mountain Lion- Protect your Mac from malware
          About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using Dr.Web Light from the App Store. It's free, and since it's from the App Store, it won't destabilize the system. If you prefer one of the better known commercial products, then Thomas recommends using Sophos.(Thank you to Thomas Reed for these recommendations.) If you already use Sophos, then be aware of this if you are using Mavericks: OS X Mavericks- Sophos Anti-Virus on-access scanner versions 8.0 - 9.1 may cause unexpected restarts
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect anything targeting the Mac because there
     is no Mac malware in the wild, and therefore, no "signatures" to detect.
3. The very best way to prevent the most attacks is for you as the user to be aware that
     the most successful malware attacks rely on very sophisticated social engineering
     techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
    your computer is intended to entice you to install their malware thinking it is a
    protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
    from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
    you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware.

Apple programs, Help, Mail, iTunes, Safari, Quicktime will not launch.

Recently we downloaded some upgrades from Apple and now Help, Mail, iTunes, Safari and Quicktime will not launch. The icon dances on the dock, and the operating system records the program as having opened, but the program does not come up and the icon menu on the dock still displays open rather than quit. I have tried re-installing the programs to no avail.

"Repair disk was unable to repair these"
Any one of the following may fix the directory damage:
DiskWarrior
Highly recommended for *directory damage* repairs.
TechTool Pro
Multi-functional utility.
Drive Genius Multi-functional utility.
You will need to make your own decision on which to purchase. Read up on them on their websites because each does something a little different.
You must use the versions that are compatible w/your OS system & keep the utilities updated to avoid damaging/harming/trashing your system.

Java 2D array program help please?

Hi - I'm teaching computer science to myself (java, using jGRASP) using some websites online, and one of the activities I have to do is to make an "image smoother" program.
I just started learning about 2D array, and I think I get what it is (based on what I know of 1D arrays), but I have no clue how to do this activity.
This is what the description says:
"A grey-level image is sometimes stores as a list of int values. The values represent the intensity of light as discrete positions in the image.
An image may be smoothed by replacing each element with the average of the element's neighboring elements.
Say that the original values are in the 2D array "image". Compute the smoothed array by doing this: each value 'smooth[r][c]' is the average of nine values:
image [r-1][c-1], image [r-1][c ], image [r-1][c+1],
image [r ][c-1], image [r ][c ], image [r ][c+1],
image [r+1][c-1], image [r+1][c ], image [r+1][c+1].
Assume that the image is recangular, that is, all rows have the same number of locations. Use the interger arithmetic for this so that the values in 'smooth' are integers".
and this is what the website gives me along with the description above:
import java.io.*;
class Smooth
public static void main (String [] args) throws IOException
int [][] image = {{0,0,0,0,0,0,0,0,0,0,0,0,},
{0,0,0,0,0,0,0,0,0,0,0,0},
{0,0,5,5,5,5,5,5,5,5,0,0},
{0,0,5,5,5,5,5,5,5,5,0,0},
{0,0,5,5,5,5,5,5,5,5,0,0},
{0,0,5,5,5,5,5,5,5,5,0,0},
{0,0,5,5,5,5,5,5,5,5,0,0},
{0,0,5,5,5,5,5,5,5,5,0,0},
{0,0,5,5,5,5,5,5,5,5,0,0},
{0,0,5,5,5,5,5,5,5,5,0,0},
{0,0,0,0,0,0,0,0,0,0,0,0},
{0,0,0,0,0,0,0,0,0,0,0,0}};
//assume a rectangular image
int[][] smooth = new int [image.length][image[0].length];
//compute the smoothed value for
//non-edge locations in the image
for (int row=1; row<image.length-1; row++)
for (int col=1; col<image[row].length-1; col++)
smooth[row][col] = sum/9;
//write out the input
//write out the result
"The edges of the image are a problem because only some of the nine values that go into the average exist. There are various ways to deal with this problem:
1. Easy (shown above): Leave all the edge locations in the smoothed image to zero. Only inside locations get an averaged value from the image.
2. Harder: Copy values at edge locations directly to the smoothed image without change.
3. Hard: For each location in the image, average together only those of the nine values that exist. This calls for some fairy tricky if statements, or a tricky set of for statements inside the outer two.
Here is a sample run of the hard solution:
c:\>java ImageSmooth
input:
0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0
0 0 5 5 5 5 5 5 5 5 0 0
0 0 5 5 5 5 5 5 5 5 0 0
0 0 5 5 5 5 5 5 5 5 0 0
0 0 5 5 5 5 5 5 5 5 0 0
0 0 5 5 5 5 5 5 5 5 0 0
0 0 5 5 5 5 5 5 5 5 0 0
0 0 5 5 5 5 5 5 5 5 0 0
0 0 5 5 5 5 5 5 5 5 0 0
0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0
output:
0 0 0 0 0 0 0 0 0 0 0 0
0 0 1 1 1 1 1 1 1 1 0 0
0 1 2 3 3 3 3 3 3 2 1 0
0 1 3 5 5 5 5 5 5 3 1 0
0 1 3 5 5 5 5 5 5 3 1 0
0 1 3 5 5 5 5 5 5 3 1 0
0 1 3 5 5 5 5 5 5 3 1 0
0 1 3 5 5 5 5 5 5 3 1 0
0 1 3 5 5 5 5 5 5 3 1 0
0 1 2 3 3 3 3 3 3 2 1 0
0 0 1 1 1 1 1 1 1 1 0 0
0 0 0 0 0 0 0 0 0 0 0 0
c:\>"
OKAY that was very long, but I'm a beginner to java, especially to 2D arrays. If anyone could help me with this step-by-step, I would greatly appreciate it! Thank you very much in advance!

larissa. wrote:
I did try, but I have no clue where to start from. That's why I asked if someone could help me with this step by step...regardless, our track record for helping folks who state they are "completely lost" or "don't have a clue" is poor to dismal as there is only so much a forum can do in this situation. We can't put knowledge in your head; only you can do that. Often the best we can do is to point you to the most basic tutorials online and suggest that you start reading.
That being said, perhaps we can help you if you have some basic knowledge here, enough to understand what we are suggesting, and perseverance. The first thing you need to do is to try to create this on your own as best you can, then come back with your code and with specific questions (not the "I'm completely lost" kind) that are answerable in the limited format of a Java forum. By posting your code, we can have a better idea of just where you're making bad assumptions or what Java subjects you need to read up on in the tutorials.

Object Oriented Programming - help required to find training material

Hi,
I am working in ABAP for 4 years. I did not get any chance to work in OOPs concept.
However I know how to create classes,methods and how to access methods and attributes of class inside the report program and I hope apart from these we are having many things to learn OOPs ABAP.
Can anyone help me to find OOPs training materials with examples?
Thanks

Hi Colleen,
This is to inform you that, I am not expecting SCN or anyone to spoon feed me. I believe in IT industry Spoon feeding is not going to help in long time to survive. I am also using google,scn,sap technical.com and so many sites for my queries and learning.Please remember I am working in IT for long. Why should I expect people to spoon feed me.
I have posted this question, because already many people might have searched and got some good and best articles with examples. So by believing that I will get good articles from the experts I have posted, but not for spoon feeding.
I agree that whatever you have pointed in this post are good suggestion, but please before answering to such issues, please think in which situation they are seeking other's help.
Everyone's time is very precious. So I will not waste anyone's time and I will not waste my time too. I am not here to raise any concern on anyone. I just needed some help and got from the experts too.
Instead of making this discussion to grow further, kindly close this here itself or remove this thread. I did not expect such sort of communication for asking the best training material for learning OOPs ABAP.
Thanks

Hiding programs....help????

Similar Messages

Maybe you are looking for