Hiding reports Dashboards

Hi,
Iam new to OBIEE, How can i hide particular reports for particular user in dashboards ?

Hi,
Use Guided Navigation concept here.
Create one report abc_RPT based on your requirement.
Now, Go to the Dashboard--> Edit Dashboard
Then Click on the properties of section which you need to hide.
path as follows:
section--> properties --> Guided Navigation --> Give the abc_RPT as source request.
Click on Ok. Save the dashboard
I hope this will be useful.
Thanks,
Visweswar

Similar Messages

CUIC 9.0 Custom Reporting/Dashboards

Good Afternoon,
I am relatively new to CUIC as a whole so any feedback to the following question is appreciated. I am a manager at a contact center who recently made the jump from Avaya to Cisco this month. I am looking for a way to create a customized dashboard for each Supervisor in our center. I would like to include a report that shows all of the Supervisor's agents and their call statistics for that current day (since the start of shift until present moment, AHT, Calls taken, Abandoned calls, hold time avg, short call % etc.) I was using "Historical Agent All Fields Daily" Stock Report. Ideally I would like to have this report be a part of their dashboard so that each time they open the Dashboard it automatically begins running the report from 8am until present, and refreshes every 30 seconds (if you can input a refresh interval). Any and all assistance is appreciated, as I stated I am relatively new to the software and I am looking forward to learning as much as possible. Thanks in advance for your help!
-Daniel

Daniel,
Unfortunately, some of the stock reports don't have a built-in option for "relative" dates (i.e., being able to choose "Today", "Yesterday", etc). If you have the "peragt26_Agent Consolidated Daily Report" available to you, you should be able to select "Today" in that, it should have most of the data you're looking for. If you don't have this report, it is available from the CDN under "WebView reports". http://developer.cisco.com/web/ccr/documentation
In order to have a report in a dashboard automatically run with specific filter criteria, it needs to have a "default filter" set up. Each report can only have a single default filter. If you have multiple defaults you would like to set up, you will need to create copies of your report, each with its own default filter. You can set the default filter by right-clicking the report in the Reports tab and choosing Edit.
Once you have your reports and dashboards set up, I would recommend potentially adjusting user permissions so supervisors can only see the reports/dashboards that pertain to them.
If you haven't seen it yet, the CUIC User Guide is here - http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/intelligence_suite/intelligence_suite_902/user/guide/CUIC_BK_R4B100EB_00_reporting-app-user-guide-902.html
-Jameson

How To Schedule an Hyperion Interactive Reporting Dashboard

Hi . Can somebody let me know on how to schedule an Interactive REporting Dashboard Report and Export the output in PDF and Email the user.i can see the output in HTML when i schedule a pivot, Chart but i dont see anything when i try to schedule a Dashboard . Any pointers in Greatly appreciated

Once you have the dashboard scheduled to run/ process your queries.
Go to run the job. In there you will need to edit the cycle by clicking on Modify
(This will open another page)
Under the Actions sections there is a part that says
Add a(n) select the drop down that says Email Section.
This will take you to anther window where you can select the section you want to output (in your case the Report)
who to send it to and what format you want to send it in (default shows Microsoft Office Web archive).
Hopefully this will help you.

Setting default page in Interactive Report Dashboard (Version 9.3.1)

Does any one know how I can set the default page (to be the first page) in Hyperion Interactive Report Dashboard version 9.3.1?
I have a report with dashboard that returns 56 pages (and the user scrolls down to page 8 of page 56) and selects a filter (which only has one page of data). However, since the user had scrolled down to page 8, the default page remains at 8 and when the user scrolls up, he/she sees blank pages (thereby causing Servlet error which Hyperion has identified as being reproducible and a bug).
They have recommened that I use the onClick event trigger for the Set Filter command button to always default the page to 1 (when the set Filter button is clicked). This will put the user on page one always and prevent the Servlet error (and them seeing unnecessary blank pages).
Any help will be greatly appreciated!
Thanks in advance
Nancy

Does any one know how I can set the default page (to be the first page) in Hyperion Interactive Report Dashboard version 9.3.1?
I have a report with dashboard that returns 56 pages (and the user scrolls down to page 8 of page 56) and selects a filter (which only has one page of data). However, since the user had scrolled down to page 8, the default page remains at 8 and when the user scrolls up, he/she sees blank pages (thereby causing Servlet error which Hyperion has identified as being reproducible and a bug).
They have recommened that I use the onClick event trigger for the Set Filter command button to always default the page to 1 (when the set Filter button is clicked). This will put the user on page one always and prevent the Servlet error (and them seeing unnecessary blank pages).
Any help will be greatly appreciated!
Thanks in advance
Nancy

Interactive Reporting Dashboard Template

Hi All,
As part of next assignment we would like to develop Interactive Reporting Dashboards. I'm very new to Interactive Reporting.
I'm looking for Template which gives an idea how to gather the Requirements for Interactive Reporting Dashboards..
Could someone suggest me how to gather the requirements....
Thanks & Regards,
Suresh

Wayne has been using IR for over 8 years.... he's god
in IR..... 'cos when I read the post, I don't think
it's possible either...
Well... I'm not alone :-)))
I'm only thinking the same as what you're thinking,
having a navigation bar or command buttons for
jumping to sections using activate command.Problem is that I have to pass some parameter taken from the row the user click to change the filter applied in the target frame, I'm used to build web apps and to have complete control over the page content... IR dashboard is a bit of a straitjacket for me :-D
Have a good day
Gianluca

How we can add buttons on report/dashboard ?

Hi,
I want to add buttons on my report/dashboard so that clicking on one button it should generate one report, by clicking on another button it should generate another report.All these things are to be done on single dashboard/report.
Thanks,
Ganesh

Hi Ganesh,
Just as Olaf said, we can embedded all other reports as subreports in the main report, then control its visibility toggled by some Textboxes. For more details, please refer to the following steps:
Drag some Textboxes(Textbox1, Textbox2, Textbox3…) and some Subreports to design surface.
Right-click one subreport to open Subreport Properties dialog box.
Select the report name which you want to display as the subreport in the General pane.
Select “Hide” option when the report is initially run and enable it toggled by ‘Textbox1’ item.
In the Parameters pane, add parameters if necessary.
Use the same method for other subreports.
The following screenshot is for your reference:
The following blog is for your reference:
http://www.codeproject.com/Articles/195017/SSRS-Series-Part-II-Working-with-Subreports-DrillD
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

XL Reporter Dashboard

as everybody knows that XL reporter is a very good tool.There is an option to prepare XL reporter dashboard.in this one can view the financial highlights of the company and can also customise it according to its needs.
Can any body help me how to prepare XL reporter dashboard

Hi Sana Butt,
Do one thing. Try to download the XL Reporter Web-Ex sessions from the service.sap.com.
It was a video recorded session. So it is very helpful to u. But before that u must have knowledge of MS Excel, like "How to create charts" etc.
good luck & all the best.
Thanks,
Suresh Yerra

Hiding reports that are used by dashboards

Hi:
We are using some Webi reports for use in Live Office/Xcelsius. While we want the users to be able to consume the data from these reports in the Xcelsius dashboards (which reside in InfoView as well as on Desktops), we don't want them to be able to see these reports in InfoView. Is there a way to "hide" these reports from the users but still give the users the ability to refresh the dashboard data that uses these reports? Thanks.
-Nishant

Go to tcode CMOD. In the project field drop down your list there. Put a Z* there and run the list. These should be all the exits that are activated. Search for the ones that pertain to FI. You can also search by development class. You need a little ABAP knowledge to search easily. You get this by going to the tcode then to status then to the program then to the attributes. There you find the development class. Ie FBAS.
pls assign points if helpful as a way to say thanks.

Questions on OBIEE Report / Dashboards

What is report based total?
while using PIVOT TABLE we find this option of the measures section > more options
Where can we set suppress or repeat default settings?
On Column properties for duplicate values suppression. I would like to know the difference between the suppress and default
Remove My Dashboard completely.
My dashboard is the default dashboard appearing to the users. If I will have to remove this and set another dashboard as default, what is the option
I would like to the usage procedure for the personalized option on Delivers(IBots)
Thanks in advance,
Samson.
Edited by: user630453 on Apr 25, 2009 9:26 AM

What is report based total?
while using PIVOT TABLE we find this option of the measures section > more options
Where can we set suppress or repeat default settings?
On Column properties for duplicate values suppression. I would like to know the difference between the suppress and default
Remove My Dashboard completely.
My dashboard is the default dashboard appearing to the users. If I will have to remove this and set another dashboard as default, what is the option
I would like to the usage procedure for the personalized option on Delivers(IBots)
Thanks in advance,
Samson.
Edited by: user630453 on Apr 25, 2009 9:26 AM

BI Publisher report - Dashboard Integration Issue

Hi,
I have a problem when trying to display a Publisher Report at Analytics Dashboard.
I'm working in OBIEE 11g. I like integrate the BI publisher to show the result set on Analysis (Answers), so, I used presentation variables to send the dashboard prompts values.
The problem is that sometimes, when I select a value in the prompt, display "loading" process, but never displayed the data. (I noticed that the browser above shows an error related to a javascript - something like Expected ')' URI: <server>/xmlpserver/js/xdo_viewer_dreamscape)
Thanks
Dag.

Dag,
I would first ensure that you can pass the parameters correctly without using a presentation variable. Just make sure it works with the basics.
Also ensure that you are integrating the parameter passing correctly. Follow this guide to ensure your passing of parameters is taking place correctly,
http://www.biconsultinggroup.com/oraclebiblog/2009/7/3/bi-publisher-and-obiee-integration-with-dashboards-prompts.html
That should work.
Let me know.
Cheers,
Christian
http://www.artofbi.com

Passing parameters into 11g agent (ibot) scheduled report/dashboard

Hi,
Does anyone know whether or not you can pass in or set parameter values when scheduling a report or dashboard using 11g agents (ibots)?
Thanks in advance
Phil

Hi All,
Is it possible to open another application in the same window?
Currently my code is:
APPLICATION.openNewWindow(
http://<>:8080/BOE/OpenDocument/opendoc/openDocument.jsp?sIDType=CUID&iDocID=<>);
This is working fine but the requirement is to open another dashboard in the same window?
Is this possible in Design Studio 1.3?
Thanks & Regards
Swasti

Download report/dashboard in pdf..

Hi experts,
1.How to download reports in pdf format.
2. How to download whole Dashboard.
S

1.How to download reports in pdf format.
We don't have individual report to download in PDF.Anyway we have Download to excel,powerpoint,Download Data,Webpage.
The above options are available in Download hyperlink when you enable the downlaod option.
Edit Dashboard -> properties->Report Link and check the download Dashboard.
2. How to download whole Dashboard.
This property is available in the bottom left corner of the page with printer symbol which has download Dashboard to PDF or HTML.
Edited by: hsekar on Dec 29, 2009 7:59 AM

How Both View Selector and Column Selector in one report dashboard section

Can we use a view selector and column selector inside a report in one section of the dashboard?
env: obiee 10g
Appreciate any links and pointers
Thanks in Advance
Kris
Edited by: user566193 on Mar 22, 2011 10:18 PM

hi kris,
Can we use a view selector and column selector inside a report in one section of the dashboard?Here view selector is nothing but having multiple views and selecting depends on what end user want to see.You are saying in a single report in once section only.
If it is a single report you can go with using a column selector.
Note:-View selector and column selector combination can be used.....but it looks wierd as you need to select view at the same time the corresponding column.
UPDATED POST
Yes you can have it by creating different compound layouts with pivots in it.
Cheers,
KK
Edited by: Kranthi.K on Mar 22, 2011 11:27 PM

SQL Server Reports / Dashboards

Hi All,
We are planning to develop some dashboards and deploy in Project Server BI section.
1. Is it possible to make some report visible to only specific users.
2. How I can display the details based on the user accessing. i.e. If the user login, the project report should only show the details of the project handle by him.
Thanks in advance, taj

Hi Taj,
Yes, both are possible.
For #1, reports are SharePoint objects so you can use Document level permissions to accomplish this. You could also create separate libraries in SharePoint and authorize each library separately.
For #2, you can use the Current User Filter web part for this. In Excel, you would define a parameter that filters the report by the user.
For SSRS, refer to this: http://dataqueen.unlimitedviz.com/2012/03/how-to-use-a-current-user-filter-to-filter-an-ssrs-report-web-part-in-sharepoint-using-a-list-of-available-values/
Hope this helps,
Treb Gatte,
Project MVP | Twitter |
http://AboutMSProject.com

GRCv10.0- Process Control & Report/Dashboard Development

Hi There,
Does anyone have documentation around the custom report development in GRC-PCv10.0. ? We are looking to build some custom reports and it seems like this can be done either web dynpro and/or crystal. It will be great if some one could share report customisation done via web dynpro. We are looking to build a report that provides a unique listing of risks and controls. Additionally, we are also looking to create custom dashboards and if there is any documentation around that would be of immense help.
Regards

Hi Aman,
I understand that and will post here some locations where you can find out the reference guides!
Also will try to get a brief about the material I have with me!
About the SAP recommendation, it will depends on our environment, how many users, what level of integration do you need, need integration with other Office tools, questions like that need to be answered in order to better provide you an answer!
Talking about my experience, I can say that Crystal is a very good tool to provide enhancements for the reports and also give us some more possibilities!
But as it´s not a requirement to have Crystal, it´s quite hard to say what is the SAP recommendation! Also, Crystal will need to be licensed separeted from GRC products!
Regards,
Claud

Hiding reports Dashboards

Similar Messages

Maybe you are looking for