Hiding rows/columns completely in SSRS tablix even when they have data

I have several columns and rows in my tablix.  I don't want to see all of them at once.  I am using a parameter that controls the visibility of the columns or rows of the tablix.  The issue is that it hides but the white space is left. 
How do i take out that white space?

Is the columns inside a group?If yes you've to set visibility property for group too in addition to rows and columns.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Similar Messages

  • Using 10.9.2 has anyone had problems with mail sounds not sounding even when they have been selected in mail preferences?, Using 10.9.2 has anyone had problems with mail sounds not sounding even when they have been selected in mail preferences?

    Using 10.9.2 has anyone had problems with mail sounds not sounding even when they have been selected in mail preferences?

    Your download or install of the update may have been corrupt. Visit the Mac App Store and re-download the update or visit http://support.apple.com/kb/DL1726 and download the 10.9.2 update combo and re-install.
    If that fails to solve the problem please post back and post a EtreCheck Report which you can locate at:
    http://www.etresoft.com/etrecheck

  • How do you set the number of rows in a spreadsheet, so that even when you drag data in, in writes over those rows instead of adding a new row?

    How do you set the number of rows you want in a spreadsheet, so that even when you drag data in, in writes over those rows instead of adding a new row?

    After the discovery reported above, I filed this report :
    Bug ID# 10073038
    Summary:
    When Numbers is used on a system with decimal comma a csv file may be good AND wrong
    Steps to Reproduce:
    With Numbers v2, you introduced an interesting enhancement.
    In system using the comma as decimal separator, Numbers requires csv files using the semi-colon as values delimiter.
    In fact it’s true if we OPEN the document dragging its icon on Numbers one or thru the open dialog.
    This said.
    (1) Drag and drop a csv built with the 'semi-colon' standard on a table or on a sheet
    (2) Drag and drop a csv built with the 'comma' standard on a table or on a sheet
    Expected Results:
    Every normally constituted user assume that in
    case (1) he will get a perfectly built table
    case (2) he will get every cells of a row in a single cell
    Actual Results:
    In fact you forgot the drag and drop way of use and in
    case (1) every values separated by semi-colon are inserted in a single cell
    case (2) values separated by comma are correctly spread in a table
    isn’t it ridiculous ?
    Regression:
    Except looking in  QuickView to see which is exactly the structure of the file to decide the way we will insert it in a Numbers document, we may use an applescript fair enough to replace the semi-colons by TAB characters
    or
    to replace the commas by TABs and the decimal periods by commas
    Notes:
    While I am on this subject, I wish to make two proposals:
    (1)  It would be fine to format the date according to the ISO format year-mm-dd when you export a Numbers doc to csv.
    Doing that, dates would be imported correctly in every countries.
    At this time, on an English system, you export as mm/dd/year.
    If the doc is open on a system using the format dd/mm/year, the results will be odd.
    On a system using the format dd/mm/year, you export this way and so, if the doc is open on a system using the format mm/dd/year the results are odd too.
    As every localized versions accept the ISO format (at least on entry), using it in the export scheme would give a correct behavior everywhere.
    (2) It would be fine to add the format Tab Separated Values in the Export pane.
    TSV + ISO date format would give documents opening flawlessly everywhere.
    Yvan KOENIG (VALLAURIS, France) dimanche 4 septembre 2011 21:27:41
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community

  • WHY does the finder insist on rearranging the files in a folder in alphabetical order even when I have selected "none" in the preferences for file organization?

    WHY does the finder insist on rearranging the files and/or documents in a folder in alphabetical order even when I have selected "none" in the preferences for file organization? Even after I numbered the documents/folders to keep them in my preferred order, it will still displace them occasionally. This is becoming increasingly frustrating!
    Is this a "Pages" issue or "FInder"? The vast majority of documents I use are in Pages, but there are also Numbers, PDFs, jpegs and a few other applications involved. This never happened before I upgraded to Mountain Lion; in Tiger, the documents (mostly Appleworks) and files stayed where I wanted them to be.
    I am visually oriented, and prefer to arrange items in a folder in an order that makes them easier for me to access, which is often NOT alphabetical.
    Can anyone suggest a solution? Please??
    Thank you.
    Sara

    nbar,
    Thank you for your reply.
    However, I do not understand what you mean by "user account." I am the only user, and can find no options for "user" or "guest." The parental controls have always been off, as there are no other people who have access to my computer.
    Frank,
    Thank you for your reply.
    All my documents, files and folders are in icon view, Arranged By: none in both view and view options. This arbitrary rearranging does not happen all the time, only when I make a substantial change to one of the documents in the file or folder. I'm not sure what you mean by "column heading."
    MichaelLAX,
    Thank you for your reply.
    I know, to my sorrow, that Appleworks does not work with Mountain Lion. I spent at least three months converting approximately 2,000 Appleworks documents to Pages, Numbers, Bento (for databases) and Touchdraw (for drawings). So this is not the problem; but as I said, I did not have this rearranging problem with Appleworks - the icons stayed where I wanted them to be. I still miss the ease and reliability of Appleworks, darn it!
    Frank,
    Thank you for your second reply.
    I do have the Sort By: in view options as well as in view set to "none."   The finder still insists on rearranging, but only when I have made a substantial change to a document in that file or folder.
    Any futher thoughts?
    xdab, 
    Thank you for your reply.
    "Are you are using icon view, but for some reason the finder moves files around? is that the problem?"
    YES!! This is exactly the problem.
    "If this operation is successful then erase the original and rename the new one to the name originally chosen by the user."
    This seems like a lot of trouble, especially as I often work on several documents at the same time.
    "By the way, the finder has a "clean up by" menu that rearranges icons in one of the standard orders, there are shortcuts that produce the same effect, for example <option><cmd>1 sorts them by name. Is it possible that this shortcut was typed by mistake without you noticing?"
    I do know about this "clean up by" option, and avoid it like the plague! So I doubt this is the issue, and I infrequently use keyboard shortcuts like this anyway.
    Thanks all who replied. None of the suggestions seem to work, however. Any others out there?
    Regards,
    Sara

  • TS3899 I have an iPhone 5 and it shows on the Mail Icon that I have over 3,000 emails to read but the number continues to increase even when I have read the email.  I thought  once you have read an email it drops off the count of "new emails"

    I have an iPhone 5 and it shows on the Mail Icon that I have over 3,000 emails to read but the number continues to increase even when I have read the email.  I thought  once you have read an email it drops off the count of "new emails"

    The received emails should show in two locations:
    1. In the All Inboxes tab of Mail.
    2. The Inbox for each mail account,
    If your emails are not showing in these locations try quitting the mail app and then reset your iPhone.
    Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it wiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal.
    To reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • Can we recharge iPhones several times a day even when they are in 50%

    Dear all,
    Can we recharge iPhones several times a day even when they are in 50%?
    Is it OK, if we leave iPhone plugged-in even when it is fully charged? I have heard that, we need to discharge battery completely at least once a month to improve the battery life. Is that right?
    Thanks

    Dear Farhad,
    there is definitely two schools of thought about this, the conventional one is use phone until almost dead then full charge, however recent articles in macworld that frequent charges do no more harm to these batteries. i think the best advice is to use your phone and then charge it when it needs charging. Most phone batteries ae fairly tired after a couple of years anyway, regardless of how to charge.
    bw
    Andrew

  • My iPhone 5 won't send texts without wifi, even when I have 4G. It also won't make calls. Any ideas?

    My iPhone 5 won't send texts without wifi, even when I have 4G. It also won't make calls. Any ideas?

    Do you have a cellular plan with data and SMS activated?

  • I downloaded digital hd copies of movies onto my parents' computer and they have a new computer now, and the movies aren't there, even though they have the same apple ID. What do I do to get them to download?

    I downloaded digital hd copies of movies onto my parents' computer and they have a new computer now, and the movies aren't there, even though they have the same apple ID. What do I do to get them to download?
    New computer: Dell, Windows 8.1
    Processor: Intel Core i7-4770 CPU @ 3.40GHz
    64-bit Operating System, x64-based processor
    16 GB RAM
    itunes up-to-date
    Old computer: Dell, Microsoft Windows XP
    Processor: Intel Pentium D CPU @ 2.80GHz
    1 GB RAM
    itunes not up-to-date (updating it isn't really an option)
    I have these movies downloaded on the old computer from digital hd redeemed codes: Fantastic Mr. Fox, Super 98, Thor, Inception, The Hunger Games, and Star Trek Into Darkness. I bought Pirates of the Caribbean: The Curse of the Black Pearl on itunes with money, and that one isn't showing up either. When I search it on itunes to see if I can just re-download it, that isn't an option. I would have to buy it again. Home Sharing isn't what I want because the old computer will not be here forever and it is not connected to wifi.
    It's kind of a lot of movies, and I want them on the new computer.

    im so happy I have a iTunes Card Code absolutely free! I got it at http://linkbitty.com/freeitunes2014

  • I have a psts on my mac and the time stamp hasnt changed since i added this to the mac even though they have been imported?

    i have a psts on my mac and the time stamp hasnt changed since i added this to the mac even though they have been imported?
    where is the data stored when i moves messages to the imported pst?
    after serval months of rebuidling and creating new identites for Outlook for mac2010 any reasons why this is constantly happening?

    I am not sure what you mean by this.
    is it ok to delete outlook ID's copy/backup as running out of space?
    If you mean you have several identities in the Office Identities folder then yes. You can delete whatever you don need\want except for your current.
    Are you updated to the latest version of Office?
    After the restore, navigate to ~/Documents/Microsoft User Data/Office 2011 Identities/your identity and delete the file called Database. Then rebuild.
    This may help:
    http://www.officeformachelp.com/outlook/troubleshoot/

  • I've a problem which is: Ibelieve there's someone who knows my password in some games like "Happy Day" so, could you please help me by not letting anybody to use this game except for this IMEI 01 336000 521261 1 even if they have the correct password.

    I've a problem which is: Ibelieve there's someone who knows my password in some games like "Happy Day" so, could you please help me by not letting anybody to use this game except for this IMEI 01 336000 521261 1 even if they have the correct password. Thanks alot for your help.

    Change your password.
    These are user forums. We can't do what you ask, in fact no one can.

  • "Unknown Artist" comes up on iPhone music library for some albums even though they have an artist in iTunes, Also some artwork not showing on iPhone even though the artwork for the album is on the iTunes library on my iMac

    Trying to copy full albums onto my iphone 5s, some (About 25%) albums have "unknown artist" where the artist should be, even though they have the correct artist names in Itunes on my MBP.
    Also some albums dont have artwork on the iphone but it is there on itunes on my MBP.
    Is there a fix?
    (itunes 11.1.2, iphone 7.0.3)

    When you fix track names and album art in iTunes the information is written to an XML database and not to the file itself. You can use Doug's scripts to embed meta information to the file.
    http://dougscripts.com/itunes/scripts/ss.php?sp=embedart
    http://dougscripts.com/itunes/scripts/scriptcount.php
    There is also an iTunes vbscript if you're using windows.

  • My Macbook is not playing sound unless i have headphones in. The light in the headphone plug stays on even when they are not plugged in. How can i fix this?

    My Macbook is not playing sound unless i have headphones in. The light in the headphone port stays on even when they are not plugged in. How can i fix this?

    You might need to clean the headphone port (I was in the same situation and this worked for me).  Dirt, dust, and debris accumulate in the port and eventually the computer registers the debris as headphones being plugged in.  After cleaning the issue was resolved.

  • Latest Software of iOS 7.0.3 Wont install even when I have deleted all  applications.I don't want to buy more memory

    Latest Software of iOS 7.0.3 Wont install even when I have deleted all  applications.I don't want to buy more memory as I have already done.

    What model iPad and what iOS version is it currently running?
    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
     Cheers, Tom

  • Sometimes when I open Calendar, it is blank even when I have entered appointments.  What must I do?

    Sometimes when I open Calendar, it is blank even when I have entered appointments.  When this happens, I tap calendars and tap hide all calendars and then tap show all calendars and mt appointments appear.  How do I get the Calendar app to show my appointments without going through this extra step?  Thanks

    Close All Open Apps...  Perform a Reset... Try again...
    Reset
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • Why can´t I use inport VI in win xp even when I have used userport aplication?

    why can´t I use inport VI in win xp even when I have used userport aplication for enabling port reading in this plattform?, I´m getting data from the parallel port in epp mode, my pc´s pararell is ok bcs I can read data in c++

    If you have an older LabVIEW (6.1 or earlier) you will need to exchange the in port and out port VIs that came with LabVIEW with different ones and install a DLL. The reason is documented here . This link (which is the first link returned when you search ni.com for "in port") explains basically that the OS won't let you until you have kernel level access. The devzone link at the bottom of the refered page will include all of the code that you need to install (VIs and DLL) to make it work.
    >
    Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
    DISTek Integration, Inc. - NI Alliance Member
    mailto:[email protected]

Maybe you are looking for