Hiding Text Fields Outwith a Repeating Frame

Hi
I have a set up where a row of data fields are within a repeating frame but the text headings are outwith the R frame because I do not want the headings to repeat.
How can I set this up so that if the main data fields is null then return false for the text headings?
I am finding this difficult because the text headings are outwith the repeating frame so I can't manage to reference to within the repeating frame (i.e. when field is null return X) using the format trigger.
Any valuable feedback on how to comlete this otherwise simple problem would be very much appreciated?
Andrew

To continue
E.G. Data row 1 is parent, data row 2 is child, data 1 has 2 child records:
Heading 1 for data 1
Data1
Heading 2 for Data 2
Data 2
Data 2
Than if there is another parent row the Data 1 repeating frame breaks and continues as below but this time there is no data 2
Heading 1 for data 1
Data1
Heading 2 for Data 2
And the heading is still there but no data.
Andrew

Similar Messages

How can I add a field to a Repeating Frame in the body of a 9i Report

How can I add a field to a Repeating Frame in the body of an Oracle 9i Report whose source is in a higher group?
I want to change an Oracle 9i report. The report has no header or trailer but only a body. The body has the parent frame fields & a repeating frame with four fields, A, B, C & D. They all seem to be in one group. I want to add another field E to the repeating frame whose source is from the 'header'.
I added the field & created a boiler plate & then added the new field, E to the original group A, B, C & D. In the Property Inspector for the field, I pointed the source to the source column in the main query. However, when I run the report, I receive the error "Invalid body size". Some notes on Metalink indicate that this could be due to margins being out of the printable area.
Moreover, after making the changes & after having unsuccessfully run the report, when I try to open the Page Layout for the report, I get no details.
Thanks,

Hi,
i also got same query can u pls tell me elaborately, if u can can u pls send some code.
Thanks & Regards
Jagadeeshwar.B

How to put non-repeating field in a repeating frame?

I have a formula field that creates the header for a list in a repeating frame. I seem to be in a quandary though-if I include the field inside the repeating frame the header gets repeated. If I put it outside the frame I get an error 'Field references Column at a frequency below its group'. If I move the formula column to the parent query it works except in the case where the child query returns no rows-then I get the header with no data.
So, I either need a way to display the header inside the repeating frame, but only once, or I need a way to suppress the header when the child query returns no rows.

So, I either need a way to display the header inside the repeating frame, but only once, or I need a way to suppress the header when the child query returns no rows.You can try one idea. Keep the formula column in detail group and create one more summary column as serial number for the detail records so in repeating frame place that field (formula column) in repeating frame and use the PL/SQL code for that field as below...
IF :serial_no = 1 THEN
RETURN TRUE;
ELSE
RETURN FALSE;
END IF;Then it should display for the first record only.
-Ammad

Adding a field to a Repeating Frame in Oracle Reports

Hi,
I have a report that has 4 repeating frames. At the lowest level (Level 4), I have several fields to do with school swimming sessions - Session Start Time, End Time etc..
I want to add a field to that frame for Session Notes, and have tried doing this by going to the Layout Model, selecting an existing field (e.g. Start Time) and doing a copy & paste into the Layout Model, with a view to then renaming it and changing the Source to Session Notes.
However, each time the new field is being created at School level (this is the Level 3 repeating frame) - obviously then when I attach the Session level column as the source for my new field, I get a field referenced "at a frequency below its group" message.
Any idea how I create a field in the Level 4 group?
Many thanks,
Keith.
PS I am using Oracle Reports v6

Before adding the items for the level4,create a repeating frame and put the right source to the repeating frame.
After doing this,put the items on this frame,and they will be level4 items.
It should work
aguero

Format Fields in a Repeating Frame

Hi All,
I have a repeating frame with multiple fields in it. I was trying to change font and size of those character fields when some parameter changes. If I put the "if ... then.." in each field's format trigger, it worked. Since those fields are included in the frame, I was thinking can I just use frame's format trigger to change its fields attributes? Is there anyway I can refer to individual field while using srw functions?
Thanks a lot for any help.

Typically you want to use the following order when dealing with how to manipulate data:
- do it on the server
- do it in the data model
- finally, do it in the layout
If you do want to do this in the layout, then you'll need to keep track of the the previous value in a PL/SQL package variable and set this value in the format trigger. You can then reference the previously set value on the next instance of the repeating frame.
However, this creates difficulties since a format trigger for a single instance of an object may execute more than once (basically when it doesn't fit on the previous page). To get around this problem, you'll need a count column in the data-model to check when you need to update the package variable value in the format trigger.
If you can, take a look at changing your data to calculate this value and just display it in the layout.

Repeating frame with anchor

Hi all,
I have a repeating frame in a report and it is anchored to a text field object (variable height). This repeating frame is Across/Down mode, but its behavior is like a Down mode repeating frame. Could anyone help me?
Att.
Diogo Domanski de Souza
PS: I've already verified the width of the repeating frame and it fits twice per row.

For easy to illustrate, let's call the variable height text field F_1, and repeating frame R_1. When you anchor from R_1 to F_1, the position of the anchor is very important and it affects the location and formatted size of R_1.
For example, if the anchor starts on the left-top corner of R_1 and ends on the left-bottom corner of F_1, that means formatted R_1 and F_1 will anchor together with 0% on the left of F_1 and 0% on the left of R_1 from the original position. In this case, you should see two columns per row.
If the anchor is in the top-middle of R_1 and bottom-middle of F_1, that means formatted R_1 (which has different width than you see on the layout model because it could expand across) and F_1 will anchor together from middle of R_1 (50%) to middle of F_1 (50%). Because of the anchor condition, you should notice even the left position of formatted R_1 would be different than on the layout model if R_1 still can contain more than one column.
In summary, the anchor is defined based on the percentage of formatted object. Once you understand that, you can adjust the position of the anchor to achieve what you want.
Hope this helps.
Thanks,
-Shaun

All fields same height in repeating frame

Hi,
If I have multiple fields inside a repeating frame and all fields and the frame are set to vertically expand, how can I force all fields to be the same height as the highest field so that everything looks equal in height even though there may be less text or no text in some fields?
Thanks

Hello!
If you use expand property to all fields they can't be at same height.
You mast set the property to fixed and set equal height to all fields on the canvas.

How Do I add new fields to Repeating Frames in existing Report

Hi,
How do I add new fields to Repeating Frames in existing Report. The Report has 2 GRPFR, 1 HDR and 2 Repeating Frames. I would like to add a new field(column) to inner most repeating frame. I added the new golumn to QUERY and GROUPs in Data Model. After adding the new column to inner most Repeating Frame in Layout Model, the Layout model is losing all other frame and it is showing only the modified one.
How do I add new column to repeating frames without disturbeing other frames.
Any hellp will be appreciated!!!!!!!!!!!.
I am using Oracle Reports 6i.
Thanks,
Ravi.

you must work in your layour editor
expand your repeating frames do it more big
for add your new items or field. after you inserted or add, can you put more little your repeating.
too can you to do one copy of one field in your repeating frame and assign it in his source your new item in your data model.
normally i begin with the principal frame and go one by one internally.

Repeating Frame with mutiple lines -- Page Break

I have a report with repeating frame R11. R11 has several fiels
spread across 4 lines.
We have a case in which there is a pagebrek, while this
repeating frame R11 is printed. Fields in the first line of R11
are printed in the first page. Then when it continues to print
the repeating frame in the next page, it is not printing the
fields in the second line of the repeating frame. In other
words, the second line is completely missing in the report.
However, fields in the third and forth lines of the repating
frame R11 are printed in the second page.
Why the second line is dropped?
How do I fix this problem?

Create one summary column (lets say cs_pagenumber) in inner group and provide following:
Function: Count
Source: any field from innrer group
Reset At: outer group
Create one summary column (lets say cs_totalpages) in outer group and provide following:
Function: Count
Source: any field from innrer group
Reset At: outer group
(above will work if one field is printed only once in a form)
Create a field in inner repeating frame for cs_pagenumber and create a boilerplate text (&cs_totalpages) in the same repating frame for cs_totalpages. This should solve the problem.
Hope this helps.

Page Numbering on repeating frame with 3 logical pages per physical page

We have a report in Reports 6i that prints a form on continous multi-part paper. We are converting the report to print to a laser printer with three forms per page. Each form has page numbers in the format of "page 1 of 15". The "page" refers to the form number and the "of" refers to the total number of forms for the outer group. So we could have page 1 of 15 through page 15 of 15 followed by page 1 of 112, etc.
I have tried all of the suggestions on how to base page numbers on a repeating frame and non of them seem to work. All the examples seem to be based on the idea that the logical page contains 1 or more physical pages; whereas my situation is that I have multiple logical pages on each physical page.
Does anyone have a thought on how to do this?

Create one summary column (lets say cs_pagenumber) in inner group and provide following:
Function: Count
Source: any field from innrer group
Reset At: outer group
Create one summary column (lets say cs_totalpages) in outer group and provide following:
Function: Count
Source: any field from innrer group
Reset At: outer group
(above will work if one field is printed only once in a form)
Create a field in inner repeating frame for cs_pagenumber and create a boilerplate text (&cs_totalpages) in the same repating frame for cs_totalpages. This should solve the problem.
Hope this helps.

How to get the values from repeated frame?.

Hi
how to get the values from repeated frame?. i have to disply the first 3 digits in another place in my report.
i have field empno in repeated frame and i want to disply first 3 digits in another place in the same report.
thanks

How often do you need to display it? It sounds like you might want to base a summary on that formula with a function of first or last. If it's a per page basis, it can be a page level summary. If it's at a higher level repeating frame, then you can create the summary at that level. I'd suggest taking a look at the online help for summaries using the first/last functions.
Hope that helps,
Toby

How to fix objects below repeating frame?

hello all! I wonder how to fix the last elements such as signature area of a sale order report to the bottom of the last page?
i find the area always appear closely after the detail lines...i don't want this
Thanks for any help!

hi philipp!Thanks for your reply.
I am meaning that a have some text objects lower than a repeating frame which height is variable and i want to have the distance between the text objects and the bottom of the page to be fixed,instead of varying according to the height of the repeating frame.The text objects and the repeating frame are in a same container frame so i can't set the vertical elasticity of the frame to fixed.
Any idea?

How do I embed multiple font outlines in dynamic text field

Can anyone tell me how I can embed multiple font outlines in
Flash MX so I can get smooth text in a dynamic
text frame? I want to use Regular, bold and italic in various
parts of the text.
I was using the Character button in the properties manager
and tried to include all Characters. That does not work.
In the Properties manager I can choose Bold and/or Italic.
But it becomes a universal setting that overrides my HTML tags in
my external txt file that I am importing. I dont want all my text
to be bold.
If I dont select them in the properties, however, Flash will
not embed the font that it needs.
Is there a different way to embed fonts other than under the
Character Tab?
I tried to import fonts to the library, but can not select
them.
Your help would really be appreciated.
Sincerely,
ggaarde

ggaarde wrote:
> Thanks Urami
> Tried your method and it does not work for me.
> I put 3 dynamic text fields in the first frame of the
movie. Set them up to
> where one is regular, one is bold and one is italic
Helvetica.
Weird, it works for me on first go, always had in fact :)
Show you an example, try to compare to your file see if you
missed anything accidentally.
http://flashfugitive.com/stuff/font/text.swf
text file
http://flashfugitive.com/stuff/font/text.txt
fla
http://flashfugitive.com/stuff/font/text.fla
Best Regards
Urami
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Repeating frames...simple problem

I am new to Oracle Reports and have run into a simple issue which I am not able to fix.
Suppose that Ive a table Numbers as shown below:
SQL> desc numbers
Name Null? Type
COL1 NUMBER
SQL> select * from numbers;
COL1
1
2
3
4
5
Now I want to build a report manually(not using the wizard).
In the datamodel Ive given the query as (select * from numbers).
In the layout model I am having one field and a repeating frame pointing to the group of the query. When I run the report it shows
1,2,3on different pages but I want all of them on the same page. I am not sure which property to set, Ive tried the maximum records per page for the repeating frame but it doesn't help!
If I build the layout using the layout wizard then I am able to achieve the desired results but I'll still like to know which properties exactly control this behaviour.
Thanks in advance.
Regards.

Three ideas -
Your repeating frame is as large as a full page and the elasticity is set to fixed.
You have page protect set to on.
You have a page break set before or after.
Easy enough to create the two reports and compare the properties in the property palette.

Repeating Frame Problem - please guide

Dear Gurus,
I am developing a report in reports 6i. The structure of report is something like this.
M1
R1
f1
f2
R2
M1 is a fixed frame containing all other elements. R1 is repeating frame containing
2 fields and one repeating frame.
Now while printing records of R2 overflow to next logical page. that's fine but space of f1 and f2 also get repeated on to next page.
To give an analogy :-
Purchase Order Report
po number - f1
supplier - f2
po lines -r2
next page
empty space present ( equal to the required fields r1 and r2 )
po_lines
Now point is i want the Po lines to continue without the space for fileds for f1 and f2 repeating.
and yes i kept vertical elasticity for M1,R1 and R2 as variable.
How can i solve it.
please guide.
regards ravi

Print Object on property it is "First Page". the structure is like
<code>
M1
R1
f1
f2
R2
</code>
Problem is when r2 overflows to next page, the space for f1 and f2 is also there on next page. What i want is content of r2 should come at the start of the page rather than at the location where its fixed when it's overflowing to next page.
regards

Hiding Text Fields Outwith a Repeating Frame

Similar Messages

Maybe you are looking for