Hiding the Clip/Event Preview Window??

Upgraded to v10.1 tonight, and this center clip preview window sudenly appeared -- and for the bloody life of me, I cannot figure out how to hide it.
All I want are the clip window (far left) and the timeline preview (far right). If I scrub the clips, I want them to show in the far right window. If I scrub the timeline, I want it to show in the same, right window.
What am I missing?!?

Top Toolbar: Window / Show / Hide Event Viewer (control+command+3)

Similar Messages

  • I have put my documents on creative cloud preview and now I can not open the creative cloud preview window open and I have nothing in my creative cloud app

    I have put my documents on creative cloud preview and now I can not open the creative cloud preview window open and I have nothing in my creative cloud app

    The license allows YOU to install on a 2nd computer... it does not allow someone else to use your license
    Licenses and terms of use | Adobe
    You may also not purchase an Education version for someone, they must do that for themself... if they qualify
    Adobe Education... Start here https://creative.adobe.com/join/edu
    Education Plan https://creative.adobe.com/plans?plan=edu
    One Year Intro Price http://forums.adobe.com/thread/1448933?tstart=0
    http://www.adobe.com/products/creativecloud/students.edu.html
    http://www.adobe.com/education/students/student-eligibility-guide.edu.html
    ID Proof http://www.adobe.com/store/au_edu/academic_id.html
    I do not  know how it is done, but you MAY be able to buy her a regular subscription and pay with your credit card... just not the Education version that has strict requirements

  • Why are some jpg images scrambled when they appear in my screen saver?   The same images look fine in Preview and Finder.  Some images appear scrambled in the screen saver 'preview' window and the actual screen saver. Other jpg images look fine.

    Why are some jpg images scrambled when they appear in my screen saver?   The same images look fine in Preview and Finder.  Some images appear scrambled in the screen saver 'preview' window and the actual screen saver. Other jpg images look fine.

    The desktop image is fine, taken from the exact same pool of jpg photos.  However, as soon as the slide show screen saver comes on, the images are scrambled.  What is it about the apple screen saver algorithm that scrambles the pics?

  • Collapsing the space-wasting preview window when clicking on bookmarks???

    Does anyone know where you can collapse the large-useless preview window in each of the bookmarks you open? I didn't realize people needed visual aids to look at their list of bookmarks under "table of contents" in the left column or in the bookmarks bar. This is just the most annoying and space-wasting of the new designs here, although there are at least a half-dozen more - just want to read my whole list of sites tallied in each folder.

    MERCI! GRACIAS!! MAHALO!!
    Is this necessary every time you "open all bookmarks", or is it possible to do it once and have it stick?
    I wonder why there were no instructions on the "Safari help" link about this ridiculous item, I guess they must assume here that everyone has a 30" screen instead of a laptop-size, and can see all their bookmark-lists upon opening them!
    Thanks again, H-S -

  • Audio Disappeared in iMovie Event Preview Window

    I've been using iMovie 09 for about 2 years with no major issues.  Today I added some new clips, and for some reason I can no longer hear audio in ANY of my "events" in the preview window (or whatever it's called--I'm talking about the box where you look at your clips and decide which parts to add to your project).  If I select a section and add it to a project, it plays fine (ie with audio) in the project window, but nada still in the preview window.  Anyone know what's going on?

    Are  you able to check the Volume setting for those imported clips? I've had clips that I've dragged from the Event Library into a project suddenly lose their audio. When I looked at the audio waveform it was flat. But I could drag the volume up to get it back to 100% where it should have been when I dragged it originally.
    Try this: Click on the clip in the Project time line, where the little 'gear' icon appears on the clip. From that pop-up menu choose Audio Adjustments:
    You will see the iMovie Inspector window open with a whole series of audio adjustments you can perform on just the audio track iself. The one you want is Volume, near the top of the window. That should always be 100%.

  • Premiere CS5 will not render video with titles on the fly in preview window

    I am trying to use CS5 and notice if I add a title to the timeline overlapping any video and then attempt to play the video as soon as it hits the part with the title the video stops playing in the preview window. The background sound keeps going but video play back stops. In premiere CS4 it would render titles on the fly no problem. Why wont it do it in CS5? I should not have to render the timeline it should do at least a rough realtime playback without a full render. In CS4 it would play any and all effects on the fly depending on the resolution and the performence would vary depending on how many and what effects and transitions were applied to the clips but its very useful to get a quick idea how it will look. If I scrub, the titles playback while scrubbing no problem its only with actual playback it happens. Other effects and transitions I apply seem to render on the fly and play back in the preview window ok, it only seems to be the titles having the issues.
    Any ideas?

    Version = 5.0
    Language = english
    Latest updates = applied
    Issue happens regardless of sequence settings
    Windows 7 64 bit
    latest updates
    english
    1650x900 , 32 bit color
    Intel core 2 duo 3ghz cpu
    8 gig ram
    Nvidia 9600 gt with latest drivers
    multiple monitor setup
    Audigy 2 platinum pro sound card from creative , latest drivers
    3 hard drives,  drive 1 = 1TB with 747gb free, drive 2= 1TB with 750 gb free, drive 3 = 200gb drive with 75 gig free
    Usualy capture video from a canon HV30 using Cineform Neoscene capture software, this is 1440x1080 HD 24p clips. (issue with the titles happens on any imported video in any format though, even with no clips but on a matt background)
    Cineform Neoscene capture software version 5 latest version
    Only using stock premiere plugins
    No error message
    I want to use the built in premiere title function to place titles along with fades and what not and then play back clips in the preview windows with the titles applied rendering on the fly. This works perfectly in CS4, just not in CS5. When I try it in CS5 after you hit the play button it will play the clip but as soon as you get to the part of the clip where the title is the video playback will freeze, mind you the clip is still playing in the sense that audio is still going just the video playback stops in the preview window. As a note if you scrub the video on the timeline the video clips will display with the titles applied it should, it is only when you hit the play button the problem happens.
    I have tried adjusing the quality settings in the preview window, updated my gfx card drivers and system drivers along with directx. Premiere is updated. I have tested other effects and transitions and they display fine, including super imposures such as chroma key or ultra key. I have adjust playback settings not that there was much to adjust there.
    I will say again in CS4 never had this issue, I am surprised to see it here.
    Please any ideas would be appriciated thx.

  • Inserted a png PIP into my clip, can see it fine, can see it playing with the clip as expected when moving the play head manually, but cannot get it to play with the clip for preview, pleas help!

    I am sorry if my inquiry here seem dumb but I am a new iMovie user and cannot figure this out.  I inserted a png image into my video clip in the project as PIP, I can see it and move it and can also see it playing with the main clip if I move the play head manually, I can also see the PIP part only playing along with the undelying main clip if I use the Play button in the preview window when the PIP section is selected, however, for the life of me I cannot get it to play with the main clip all together for previewing the entire video via the video play button.  What happens is that the video plays normally and when the PIP section comes in, the video clip stop all motion during the duration of the PIP section and the PIP image itself is simply NOT showing.  Am I missing something really stupid here?  It seems as it the Picture On Picture is a separate clip that plays with the underlying main video clip if selected and played by itself but it is not part of the video clip and will not play with it.  What am I missing here, can anyone please help?
    Shony

    The easiest way to get up and running is to convert your MP3s to MP4s (obviously there won't be a video track). The following link links to a file that was an MP3 that I converted to an MP4 using QT Player Pro. When you go to export the files, make sure you click on "Options" and then check the box for "Enable Streaming" in the Streaming tab. It should stream flawlessly using QT Player. rtsp://rhsstreamit.rih.org/testmp4/Scorpion.mp4
    Make sure you place the media to be streamed in the proper folder. You should only get a "404" message if the physical file doesn't exist.
    Good luck!

  • Hiding the osx Partion in Windows

    Hello after installing Windows 7 using boot camp I noticed that the mac osx
    partition is visible in the windows install.
    I am little nervous about this and was wondering if there is any way to hide
    this from my windows 7 install?
    Thanks

    You can't hide the partition from any tool that reads the drive, as the partition is clearly on the drive. You can un-install the Boot Camp driver for the HFS+ file system, then your Windows installation won't be able to read the files on the disk (since the driver is read-only anyway). Is that what you are looking to do?

  • IMovieHD Preview windows

    I think I have a gremlin in here... have just upgraded to iMovieHD and having problems 'fixing' a photo, in place, in the preview windows. I position the photo in the small (upper right) preview window, then update... but, once update is complete, the photo in that small window jumps out of allignment. This is frustrating... all the settings are lost, so to make a change I have to constantly reposition the photo. Got smart, figured would try KB... set the end and start number the same... success, got the picture to stay 'put' in the small preview window... but the clip panel photo jumped out of allignment! Also, even though I am careful to zoom in and position the photo in the smaller window... the photo in the clip/larger preview window still shows a thin black band, usually at the bottom. I have to make a 'guess' at how much to zoom in for the photo to be 'clean' of frame. I checked prefences, settings, updated and cleaned both iMovie and QT, removed older versions ...even reinstalled iMovieHD. Is there a setting, or something I have missed? Or, does anyone have a good 'mouse' trap for this really annoying little gremlin?

    Hi Ann. Welcome to the forum.
    is is frustrating... all the settings are lost, so to make a change I have to
    constantly reposition the photo. Got smart, figured would try KB... set the
    end and start number the same... success, got the picture to stay 'put' in the
    small preview window... but the clip panel photo jumped out of allignment!
    In iMovie HD, if the Ken Burns checkbox is OFF when you import an image, there's a bug that fails to restore the prevew settings when you click on the clip in the Timeline. As you say, the preview window places the image in the wrong place. It creates a real mess.
    (That's only true if the preview wasn't centered when the photo was imported.)
    There is no workaround for the bug, which makes it very irritating.
    The bug does NOT occur if the Ken Burns checkbox is ON when you import the photo. When you click on the Timeline clip, the Ken Burns settings are correctly displayed.
    The other alignment problems you see can be cured by re-setting the Ken Burns pan/crop. In effect, you want to return the preview window back to its default position.
    To do that, click on the Ken Burns Start side of the Start/End thingy. Pause. Drag the zoom slider a bit to the right, then all the way to the left. Repeat for the End side of the Start/End thingy. Now the preview window is centered.
    Please complain to Apple about this bug. Hopefully it will be fixed sometime soon. (But I'm not counting on it.)
    http://www.apple.com/feedback/imovie.html
    Karl

  • Preview Window really laggy in PE8?

    Hi
    I just can't get the Preview Window to keep up.
    I'm looking for a setting that will reduce the resolution of the image and lower the overhead (the preview quality is very high right now, It looks as good as the final output, it used to be pretty blurry, but it ran smooth) but I can't find a way to change it.
    The sound and everything is working and keeps pace but it's hard to edit when the preview window lags and then skips ahead 5 seconds completely skipping transitions etc or just stops at one frame and sit there to the end of the clip.
    The video I have loaded right now is only one and a half minutes long and the video is coming in as a 1600 by 900 avi file.
    I always worked at 1200 by 900 before but I'm trying to switch to wide screen.
    Everything else seems to be working ok.
    I recently did a clean install of my operating system (Windows 7), I have a very fast computer, i7 at 3Ghz and 8 Gigs of ram along with an ATI 5870 I gig video card, and everything else is running really well except for PE8 and PE9.
    Both of them are not running as well as they did in the past.  I can run Lord of the Rings Online at 250 fps, it shouldn't have trouble running a little 2D preview window.
    Both of my hard drives are defragged, and clean of any malware or junk.
    PE9 was so bad I went back to PE8 but it's only slightly better.
    When I do output the edited video it looks fine, and runs smoothly.
    Mike

    Hi
    I got it fixed, I removed both PE8 and PE9 using Revo Uninstaller.
    I cleaned everything out.
    I reinstalled PE9 in the default location and installed the update 9.0.1.
    I when I opened it up the old grainy Preview Window was back and it run normally again.
    I then discovered that somehow it had changed the Playback setting from Automatic to Highest, and that was the problem.
    I don't know how it got changed I had a lot of other things that were weird, for instance when I would open PE9 it wouldn't load all of the interface, just the preview window without the options on the right side of the screen, Organize, Edit etc.
    Anyway everything seems to be back to normal, and it no longer logs me in and tries to save all my files online either so I guess I'm all set.
    Now it's time to get back to work on my video.
    Mike

  • Smart Sharpen and Reduce Noise preview windows are blank

    Hello,
    I am using Photoshop CS5 64 bit with WIndows 7
    Whenever I try to use the Smart Sharpen or Reduce Noise image menu items, the preview window for both
    these applications are always blank.
    My images are mostly 16 bit with some 8 bit but I always get the same blank preview window
    Any help would be appreciated
    Dave Harman

    Always check your LAYERS panel to ensure you've activated the image layer on which the pixels reside, and not an adjustment layer.  Also make sure you've clicked on the image if there's a layer mask present, so the filter won't be inadvertntly working on the mask.
    Assuming you're not on the wrong layer, have you checked to see whether new drivers are available from the web site of the maker of your video card?  Many, many display problems are resolved by updating display drivers.
    -Noel

  • When downloading from my PD 150 to the event window in my iMac the clips are out of order and split into many subclips   ac  iMac the clips in the

    when downloading from my PD 150 to the event window in my iMovie the clips are out of order and split into many subclips. Very frustrating

    Nevermind, somehow it's magically back in order.

  • IMovie 11 projects no longer working, preview window is glitched or black, event library not playing imported vids

    I am having a lot of trouble with iMovie 11.  I bought a new MacBook Pro 15" for the sole purpose of editing surgical videos for work.  iMovie 11 was working great initially for me (taking full length surgical video - up to 2 hours) and editing these down to anywhere from 5 to 30 min videos highlighting crucial steps for the surgeries along with transitions, ken burns, etc  (with the plan of overlaying narrative voice-over later).  I had about 15 of these videos edited sitting in my Project Library and multiple imported videos (dvd to m4v via handbrake then imported via iMovie 11) in my Project Library.  Now none of my projects play in the preview window, it's either black or a weird glitchy picture (like messed up pic of my doc or desktop... really weird) and only about 2 of my imported videos play in the project library, otherwise they are just black when I roll over them.  My projects are still intact as far as edited clip lengths and transitions, but nothing plays, even in full screen mode.  I tried making a new project and the imported video shows in the event library but when I add it to a project it's black (but does play in full screen mode, but impossible to edit this way).  I think the audio is actually intact although i'm not positive because these videos don't have any audio (there's some baseline level that fluctuates on the audio bars). 
    I tried finalizing and exporting a project as an m4v (one that was a combination of two edited imported videos - one of the source imported vids working in the event library and the other not working) and the first half is all glitched up with no surgery video, but the second half is there with the transitions and everything (the half that is working in the event library).  This part does not show up when I am trying to edit the project. 
    fyi - I had deleted some of the videos from my event library to unclutter a little some time ago, the projects were still working after that.
    I can find all of my imported videos (in .mov format) that should be working in the event library when I look in the folder:
    users/me/movies/iMovie events
    If someone could please help me resolve this issue, I would really appreciate it.  I put a lot of work and time into these videos and it would be near impossible to start from scratch (which would probably be on some other movie editor like windows movie maker since my iMovie is not working properly even for new projects).  I'm hoping this is just some sort of glitch that can be fixed and my projects are still salvagable.  I can't remember if this started after I did a system software update or not.  This will be a huge dissapointment for me in the Apple platform if I have to scrap my projects because I had just switched over from the PC platform. 
    I even got Norton antivirus and internet security to make sure I don't have some sort of weird virus.
    I have a Feb 2011 15 in MacBook Pro 2.2 Ghz, 4 g RAM, 750 g HD, 1 g vid card.  iMovie ver 9.0.4.  Lion 10.7.2

    Did you by any chance upgrade your Mac OS from version 10.6 (Snow Leopard) to 10.7 (Lion) during the time you were working in iMovie on all these projects?
    If not, start by deleting the iMovie Preferences file.
    Go to the Desktop
    Hold down the Option key and choose the Go Menu > Library
    Go to Preferences > com.apple.iMovieApp.plist
    Move the .plist file to the trash and restart iMovie
    See if the Project files react any differently. Failing that try doing a Repair Disk Permissions:
    Restart the Mac, hold down the Option key continuously until 2 hard drive icons appear
    Choose the Recovery Volume as your startup disk and let it run until you see the Desktop
    Choose Disk Utility from the Recovery Menu
    Run Repair Disk Permissions in Disk Utility
    Reboot the Mac and when you see the Desktop appear launch iMovie
    See if the Project files are the same or different. Next step after this is to one at a time take the Project folders out of users/me/movies/imovie projects. Move one to the desktop and start iMovie. Try skimming the projects that acted up recently. Moving one project at a time might help isolate which project may be causing problems. You can also place project folders back in their original location after doing this testing and iMovie will recognize them on the next relaunch. It won't hurt anything.

  • Video will not show in the preview window

    I am using iMovie 08 and have some video that I pulled into iMovie using my iSight. Whenever I am trying to preview my movie it will not show in the preview window. I did a software update for iMovie and the issue is still happening. Any ideas??

    Although the same not preview-able iMovie event played perfectly fine when transferred to a different mac running perian and divx, disabling Perian solved the issue on my macbook, too!
    Thanks for the tip!
    I still wonder why some clips preview and some don't (with perian running)...

  • I have MTS files imported from a Canon HD cam. They import into I movie and I see them in the Finder folders and they preview fine. I have a new project and some of the clips are freezing and some audio is now gone? Do i need a file converter and convert

    I have MTS video files that import from a Canon Vixia HF S20 HD camera. I imported into I Movie. They converted into MOV files and I see them in the movies folder in finder. They view fine and run through the events folder in Finder. In I Movie, I created a new project and used a "Theme". The project worked fine at first but then some clips started to freeze and some lost audio. The effected clips are the same in the project library and in the event library, meaning they are froze in both places. As I said when i view through finder the MOV files preview and work fine.  Is this inherent to MTS files using in I movie. SHould i consider using a file converter to convert to MOV files prior to importing into I movie.
    I found on Apple support site info that states the MTS files can only be imported through the camera. I am developing my back up procedures and now I am faced with backing up in the original MTS files but not being able to reload if necessary into I movie. Any suggestions?

    I'd like to add that after I import these clips without thumbnails, iMovie does give me an error and say that they could not be imported. No explanation as to why, though. Again, they play fine on my camera.

Maybe you are looking for