Hiding the objects in IDT - Reports not working

Hi All,
I have created some Webi reports.Now when i go back and change the Objects state as 'Hidden' in IDT (Information Design Tool), then exported the universe to Repository.i am using SAP BO 4.1 tools.
Now come back open those reports.It didn't open at all and throws me error message 'Unresolved objects.See your Business objects administrator'..
So please help me how to fix this issue by keeping those objects as hidden.
Thanks,
Regards,
Nanda Kishore.

Hi Ravi,
Thank you very much for your quick response.
But my requirement is that the hidden objects should not be removed from the report.
Those objects should be present in Webi report but should not be visible to users.
One more thing where to see that AUTO_UPDATE_QUERY parameter in Business layer and Data Foundation layer.
Thanks,
Nanda Kishore.

Similar Messages

  • IPS event monitor and reports not working

    Dear after upgrading my IPS from E3 to E4  the event monitor  and reports not working, can you please advice my to solve this issues

    Hi All,
    Filter settings below:
    The filter works partially as I don't get alerts on the IPS itself.
    Firewall LOG:
    4          Feb 14 2014          15:33:22                              39715                    514          IPS requested to drop UDP packet from SOURCE_VLAN_NUMBER:/39715 to DESTINATION_VLAN_NUMBER:/514
    IPS LOG (when enabled):
    evIdsAlert: eventId=1352793300955167909  vendor=Cisco  severity=low 
      originator:  
        hostId: SSM02 
        appName: sensorApp 
        appInstanceId: 1192 
      time: Feb 14, 2014 15:33:22 UTC  offset=0  timeZone=GMT00:00 
      signature:   description=IP Fragment Too Small  id=1206  version=S212  type=anomaly  created=20030801 
        subsigId: 0 
        sigDetails: Too many small IP fragments in datagram 
      interfaceGroup: vs0 
      vlan: 0 
      participants:  
        attacker:  
          addr: 172.x.x.x  locality=OUT 
          port: 39715 
        target:  
          addr: x.x.x.x  locality=OUT 
          port: 514 
          os:   idSource=unknown  type=unknown  relevance=relevant 
      alertDetails: InterfaceAttributes:  context="single_vf" physical="Unknown" backplane="GigabitEthernet0/1" ; 
      riskRatingValue: 50  targetValueRating=medium  attackRelevanceRating=relevant 
      threatRatingValue: 50 
      interface: GigabitEthernet0/1  context=single_vf  physical=Unknown  backplane=GigabitEthernet0/1 
      protocol: udp 
    Our next step is to make a service policy exception on the firewall itself. We are also considering reloading the IPS device or at least the analysis engine.
    Thanks for all your help so far. Any more suggestions are most welcome. I'll keep you up to date.
    Regards
    Mariusz

  • SQL Report not Working

    We have this DCM report in SCCM 2007 and we want to migrate it to SCCM 2012. In SCCM 2007, this report is working when you run it in the sccm console, but does not work when you run it in sql management studio. The error that I am encountering in sql management
    studio is
    The EXECUTE permission was denied on the object 'fnBuildCICategories', database 'SMS_ABC', schema 'dbo'
    After importing this report in SCCM 2012, this report is giving me the same error when running from the sccm console as well as in sql management studio
    Can anyone help me resolve this issue. Here is the sql report
    declare
    @severity varchar(255)
    declare
    @cicontentversion varchar(255)
    declare
    @name varchar(255)
    declare
    @category varchar(255)
    set
    @severity =
    'Informational'
    set
    @name =
    '1.0 Compliance Baseline'
    set
    @cicontentversion =
    set
    @category =
    'Windows'
    if
    IsNumeric(@severity)<>1
    begin
    select @severity=Severity
    from v_CIValidationSeverity
    where
    Description=@severity
    end
    select
      loc
    .DisplayName
    as BaselineName,
      ci
    .SDMPackageVersion
    as BaselineContentVersion,
      cssev
    .Description
    as MaxNoncomplianceCriticality,
      summ
    .CountCompliant,
      summ
    .CountNoncompliant,
      summ
    .CountTargeted
    - summ.CountCompliant
    - summ.CountNoncompliant
    - summ.FailureCount
    as CountNotReporting,
      summ
    .FailureCount,
      summ
    .CountTargeted,
      summ
    .ActivatedCount,
    case
    when summ.CountTargeted>0
    then
    convert(numeric(5,2),
    100.0*summ.CountCompliant/summ.CountTargeted)
    else 0
    end
    as CompliancePercentage,
      dbo
    .fnBuildCICategories(ci.CI_ID)
    as Categories,
      ci
    .CI_UniqueID
    as Baseline_UniqueID,
    -- used for drillthrough
    from
    v_CIComplianceSummary summ
    left
    join v_CIValidationSeverity cssev
    on cssev.Severity=summ.Severity
    left
    join v_LocalizedCIProperties_SiteLoc loc
    on loc.CI_ID=summ.CI_ID
    inner
    join v_ConfigurationItems ci
    on summ.CI_ID=ci.CI_ID
    left
    join(select
    distinct CI_ID
    from
                v_CICategoryInfo cat
    where cat.CategoryInstanceName
    = @category
    or @category='')
    temp
    on
    temp.CI_ID=ci.CI_ID
    where
    CIType_ID=2
    and(loc.DisplayName
    = @name
    or @name='')
    and(ci.SDMPackageVersion
    = @cicontentversion
    or @cicontentversion
    =
    and(summ.Severity
    >= @severity
    or @severity='')
    and(temp.CI_ID
    is
    not
    null
    or @category='')
    order
    by summ.CountCompliant,
    summ.Severity,
    BaselineName, BaselineContentVersion

    I bet you have an SSRS exestuation account that has been given the correct permission within the CM12 db. Are you dbo for CM12 db? if not have you grant yourself db_reader and sms_report reader (local group) rights?
    Did you know that even if you do that this working, there is another issue with respect to converting varchar to int?
    http://www.enhansoft.com/

  • Drill down report not working in 1og report

    hi all,
    Drill down report not working in 1og.
    in 6i it working good but 10g not working .
    plz help any one.
    thanks

    Hello,
    For detailled instructions about hyperlinks :
    Oracle® Reports Building Reports
    10g Release 2 (10.1.2)
    B13895-01
    3.6.10.1.8 Creating a hyperlink using the Property Inspector
    http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b13895/orbr_howto.htm#i1062802
    Regards

  • CDR report not working

    Hi,
    We have LYNC 2013 and Monitoring is enabled. the CDR report is not working. even User Activity summary for telconferencing and for audio, reports not working.
    Kindly suggest troubleshooting steps.
    Can we have any SQL query to fetch the report from database?
    Thanks
    jitender

    Hi Raju,
    From Monitoring server , CDR report is not working. Even "User Activity Report" not working and giving below error for "Telephony Conference" and as well for "A/V Conference"
    " No results match the report filters. Change the filter values and submit the query again."
    Thanks
    jitender

  • ZSAPLINK for Object type = CLAS is not working

    Dear Experts,
    ZSAPLINK for Object type = CLAS is not working. On executing by selecting Export Object to Slinkee with Object type = CLAS and class name, It is giving the dump which is shown in below snapshots. Pls guide me how to resolve this error.
    Thanks
    KH

    From the screenshot, It seems that the object  _renderer did not point to any memory location.
    You can verify this by putting a breakpoint in method IF_IXML~CREATE_RENDERER of class CL_IXML
    If the return value RVAL is initial, this mean there something wrong with the kernel module abkm_iXML_CreateRenderer. If it is, you will have to check with your Basis team to apply some kernel patches.
    Hope it helps. Cheers!

  • Using Acrobat Pro X on windows 7.  The replace pages feature does not work.  Is this a known issue? Is there a fix?

    Using Acrobat Pro X on windows 7.  The replace pages feature does not work.  Is this a known issue? Is there a fix?

    Hi Todd,
    I haven't heard other reports of this (though there was an issue quite some time ago where deleting pages on this combination of Acrobat/OS was challenging).
    Can you please tell me what happens when you try to replace pages? Do you get an error message? Are you able to manipulate pages otherwise (delete, extract, and so on)? Is this issue unique to one file, or does it happen with all PDF files?
    I look forward to hearing back from you.
    Best,
    Sara

  • After i install Visual-Studio 2013 crystal-report not working

    hi
    after i install Visual-Studio 2013 crystal-report not working on my Visual-Studio 2010 projects
    when i try to open crystal-report i see this:

    Hi E_gold,
    Crystal Reports forum may be a better place for you.
    Thanks for your understanding.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • TA44551 My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work.

    My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work. I tried to restore it again and charged it in three different locations with different cables. etc but nothing. Suggestions?

    - After charging for 1/2 hour or so, does iTunes see the iPod?  If yes, restore the iPod from backup.
    - If no, se if placing the iPod in recovery mode will make it visible so you can restore the iPod.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • I have a iphone 5 and I can login with my apple id to purchase music. However, when I try to login into icloud using the very same username and password that I use in the apple store it does not work to enter icloud, so what what gives???

    I have a iphone 5 and I can login with my apple id to purchase music. However, when I try to login into icloud using the very same username and password that I use in the apple store it does not work to enter icloud, so what what gives???

    I could do that, however when I select the icloud button (or whatever the heck it is) I am asked to enter the apple id and password. So if you are suppose to create another one for icloud you'd think it would give you the option at this point which would be logical.

  • When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

    When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

    Hi Brian,
    Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
    Thanks for your help though!
    Pernille

  • I have 4s iPhone , I download the iOS 7. Now the front receiver microphone is not working , please help me that how to fix the problem.

    I have 4s iPhone , I download the iOS 7. Now the front receiver microphone is not working , please help me that how to fix the problem.

    I live in South Africa, and I had the same problem with my iPhone 4.
    After weeks of frustration and swearing, I was in the process of restoring my phone to a previous iOS. To do that you need to turn the "Find my iPhone" option off, since i turned it off, my problem was solved. No need to repair anything or revert back to old iOS.
    ***** that i cant use Find my iPhone, but atleast i can use my phone.

  • My ipad mini is not syncing music onto in, my ipad has been replaced to see whether the issue is to do with the ipad but its still not working. i have a a windows PC please help thanks

    my ipad mini is not syncing music onto in, my ipad has been replaced to see whether the issue is to do with the ipad but its still not working.
    ive tried everything and ive been to the store which was when i was given a new ipad mini. i have a a windows PC please help thanks

    Are you attempting to sync music from your iTunes Music Library on your PC?
    What options do you have set on the Music Tab for your iPad in iTunes?
    What happens when you sync?
    Any error messages?

  • I have an ipod touch 3rd generation and the whole touch screen is not working.

    I have a 32gb ipod which I bought for fifty dollars and when i bought it had a pretty baddly cracked screen but thing is it worked fine. Every part of the screen worked fine; it was as senstive where the screen was cracked as the areas of the screen that were not cracked. I dropped it a couple times from like two or three feet on two a hard wood floor about four times all it did was make the cracks on the screen a little worse. Then one day I dropped it from about a foot and now the whole touch screen is not working does anyone know why this is. They told me at the ipod store to get a new one would be 130 to trade mine in. But the thing is I very mechanically inclined and I am very good with electrionics; I was planing on buying the glass for fifty bucks and putting it on myself because I read how to do it and I am more then capapble of doing it. But now since the touch screen is now working; do I need a new screen along with a new glass? See the thing is because I think both those part cost 120 together. Which would not be worth me doing that when I can go to the ipod store and they would trade me a new one for 130 bucks. But the issue is, they told me at the ipod store they would have to look and see how damaged the ipod is to see if they will exchange it. My screen is severly cracked; also I have a dent that is a half inch long and 1/8th inch deep in the back of my ipod and its very scracthed up; do you thing an ipod store would exchange it in the condition it is in. Also has anybody had this problem before and I was wondering if it would be possible for me to take it apart and fix it my self without buying any new parts.

    If I were you, I would pay the $130 for a replacement. Then you can be sure that it has all the working parts it needs.

  • Safari is not working on the Mac. Internet is fine, mail, App Store etc all working and connecting to Internet fine. Done the latest software update, still not working. When selecting a web address from bookmarks or typing in search bar, partial blue bar.

    Safari is not working on the Mac. Internet is fine. mail, App Store etc all working and connecting to Internet fine. Done the latest software update, still not working. When selecting a web address from bookmarks or typing in search bar, partial blue bar only and coloured wheel appears.

    From the Safari menu bar, select
    Safari ▹ Preferences ▹ Extensions
    Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
    If you wish, you may be able to salvage the malfunctioning extension by uninstalling and reinstalling it. That will revert its settings to the defaults.
    If extensions aren't causing the problem, see below.
    Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found

Maybe you are looking for