Hiding the screen display in export

While running the export in oracle 10g rel 2 ,i want to hide the display of the export that comes to screen . Is there any suitable parameter with export.? Iam using a shell script

Add ‘2>/dev/null’ to the end of your export command.
This will redirect stderr (which export sends its
output to) to the null device.
For example:
exp / owner=scott file=scott.dmp 2>/dev/nullwhat is 2 there...........
cant we use
exp / owner=scott file=scott.dmp >/dev/null

Similar Messages

Hiding the screen display

hi folks,
I have an issue, I am executing a report program , at the end of which a screen gets displayed and the module pool program is MP400000 which in turn calls another include program MP400030 within this include program there is a perform statement which Calls an transaction screen.
CALL TRANSACTION 'PB60' AND SKIP FIRST SCREEN.
I need to hide this screen from display. I do not want this screen to be displayed.
Can I just comment it? because i want the action to be perfromed but no screen to be displayed.
How can I do this?
Thanks in advance
Vinu

I did that but I found out that it is an include program and tracked back to the main module pool program MP400400 (which is screen) displayed for infotype 4004 (related to recruitment). it does not have any executable program It looks like it is a dynamic screen.
How can i control that?
Thanks
Vinu

The screen displays hard disc not exist

The screen displays hard disc not exist i tried everything in the support section but ended up with this.

Hi,
Did it show up any code such as 3xx (xx is a hex number). Well, could be one of the following things:
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and/Hard-drive-does-not-exist/td-p/1569627
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and/hard-disk-does-not-exist-what-does-that-...
http://h30434.www3.hp.com/t5/Notebook-Lockups-Freezes-Hangs/my-laptop-says-my-hard-disk-does-not-exi...
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I have updated my Iphone5 with new IOS6 - now the screen/display does not react to my taps on screen as in i cant tap in my pin to start???

I have updated my Iphone5 with new IOS6 - now the screen/display does not react to my taps on screen as in i cant tap in my pin to startup???

I have updated my Iphone5 with new IOS6 - now the screen/display does not react to my taps on screen as in i cant tap in my pin to startup???

Since updating Iphone 4 the screen display is too large

Since updating my Iphone 4 the screen display is too large to fit on the screen. For example the green battery graphic is so large half of it takes up the full screen.
I pressed restore and restored the phone. I then restored my backup files and I still have the same problem.
Does anyone have any suggestions?

This is asked and answered many,many times and is covered in the manual ( Zoom feature).
iPhone User Guide (For iOS 4.2 and 4.3 Software)
Double tap with three fingers

HT4623 why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

You are in Recovery Mode. Follow the instructions below to recover your iPad.
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

I have a macbook pro 10.6.8. The screen displays vertical grey lines how do i fix it?

I have a macbook pro 10.6.8. The screen displays vertical grey lines. I tried Crtl.command.eject... Did not work. I tried Command.crtl.p.r. way; Didnt work. What is wrong with my mac and how can i fix it?

NVRAM reset is command, option, P and R.
Restart the computer and immediately hold the four keys down. Keep holding the keys down, and let the Mac chime three times, then release the keys. Be patient it could take some time.
That being said what you describe may be a hardware issue, so the NVRAM reset probably won't work.
You can get a free diagnosis at an Apple genius bar. Make an appointment and take the MBP in,
http://www.apple.com/retail/geniusbar/

When i try to switch on my Apple iPod Touch 2G 8GB , all i get is just the screen displaying " Connect to the iTunes " . What should I do?

WHENEVER I TRY TO SWITCH ON MY APPLE iPod TOUCH 2G 8Gb , ALL I GET IS JUST THE SCREEN DISPLAYING " CONNECT TO THE iTunes " . WHAT SHOULD I DO ???

Do just that. Connect it iTunes and restore it as it appears there is a software issue with the device.
B-rock

Why do i need to restart my imac everyday like ten times to get it to work, also the screen displays little digital squares.

Why do i need to restart my imac everyday like ten times to get it to work, also the screen displays little digital squares.

Hi Matt,
I purchased my imac in November of 2010 and below is a cut and past from Hardware overview. It has 1 TB hardrive, with 670 GB free. When i start up in the morning, it boots normal then freezes. Half the time i can get it to restart before it freezes, other half i have to power down then restart. At the same time throughout this process the little pixel squares show up sometimes in a single line or two aross the screen, then sometimes more random. After about 7 times of rebooting, everything runs fine for the day with no weird pixels. then i shut down at night, and start the porcess over in the morning. Thanks for your help!
iMac
Model Identifier:
iMac11,3
Processor Name:
Intel Core i5
Processor Speed:
2.8 GHz
Number Of Processors:
1
Total Number Of Cores:
4
L2 Cache (per core):
256 KB
L3 Cache:
8 MB
Memory:
4 GB
Processor Interconnect Speed:
4.8 GT/s
Boot ROM Version:
IM112.0057.B00
SMC Version (system):
1.59f2
Serial Number (system):
Hardware UUID:
AF510593-DDA2-513F-AE18-631B726F0BB1

I turned on my iphone this am and the screen display is larger than the phone and I can't resize it. How can I make it smaller?

The screen display on my iPhone won't resize. How can I make it smaller?

You have Zoom on... double tap with three fingers to turn it off. Go into Settings > General > Accessibility to disable it.
See p. 243... http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf

HT201210 my iphone 4is frozen the screen displays a plug cable with an arrow to itunes logo

how do fix a frozen iphone with. The screen displays a plug with an arrow to an itune logo

Nothing. It is just frozen. If I try to turn the power off. It powers off for a few seconds and then comes back with the iTunes logo, arrow and plug

I have a ipod u2 the screen displays an icon for the current conetar but does not start

I have a ipod u2 the screen displays an icon for the current conetar but does not start

Shockwave and Flash are not the same. Try installing a Flash plug-in. Here's the latest: Adobe Flash Player 11.2.202.183

HT202213 The screen displayed on the instructions for home sharing described as being found on the left side of iTunes isn't visible on the new iTunes page?? Where do i find that screen i.e., how do I fine the home sharing icon on the new iTunes page?

The screen displayed on the instructions for home sharing described as being found on the left side of iTunes isn't visible on the new iTunes page?? Where do i find that screen i.e., how do I fine the home sharing icon on the new iTunes page?

ontthe top menu
View > Show sidebar
Then the computers for home sharing show up under the Shared section

What could be wrong with my iMac? When switched on the screen displays the apple logo with a busy bar at the bottom of the screen. This displays the progress of the computer trying to do something. To fill the bar takes about 30 mins and then switches off

What could be wrong with my iMac? When switched on the screen displays the apple logo with a busy bar at the bottom of the screen. This displays the progress of the computer trying to do something. To fill the bar takes about 30 mins and then switches off

Which OS X is installed?

I need to connect a computer monitor to my MacBook Pro but have found that when using the mini display port to VGA adaptor the screen display on my macbook is very small font. Please what do I do to correct this?

I need to connect a computer monitor to my mac book pro, using a mini display port to VGA adaptor. But have experienced a drastic reduction in font size on my
Mac screen even before I have managed to check the result on the monitor screen. Please how do I compensate for this and restore my mac screen appearance?
Many Thanks Alangium in uk

Hi alangium,
Welcome to the Support Communities!
Resetting your computer's PRAM should restore your Macbook Pro's screen appearance.
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
This article may provide some information about your Mini DisplayPort to AVI adapter. Have you tried to connect a different VGA monitor to your Macbook to see if you get the same results?
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
http://support.apple.com/kb/HT3382
18. What is the maximum resolution available for use with the Apple Mini DisplayPort to VGA adapter?
The resolution available with the Apple Mini DisplayPort to VGA Adapter is 1920 x 1200. VGA displays that use higher refresh rates (such as 85 Hz) at resolutions of 1600 x 1200 or greater may not generate video properly until you lower the refresh rate.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573#5
How can I detect displays?
If the detect displays option is not available, hold down the Option key while you are in the Display pane.
How do I select additional resolutions on my display?
You can use the Display pane of System Preferences to specify how your display works. Not all options appear for all display models. By default the best resolution for your display will already be selected in System Preferences.
To select a different resolution, use the Scaled option. Some additional resolutions may be available when you hold the Option button.
I hope this information helps ....
- Judy

Hiding the screen display in export

Similar Messages

Maybe you are looking for