Hiding wireless messages on boot [Solved]

After clearing the systemd startup sequence on my laptop, the system displays several messages regarding what I can only assume to be the kernel's wireless drivers, such as
[ <some value, perhaps a timestamp?>] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[ <some value, perhaps a timestamp?>] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enable true, count 0 (implment)
They also show up as I go in and out of hibernate and sleep. These would be fine, except they often get printed in the middle of my login prompt. Is there any way to disable these messages or route them elsewhere, such as to a log?
I'm using NetworkManager, for what it's worth.
Last edited by slavik262 (2013-03-05 17:05:33)

I edited multiple options in /etc/systed/journald.conf, including uncommenting ForwardToConsole=no and uninstalled syslog-ng (since the wiki advised that it is no longer necessary given systemd's journald service), but these messages still persist. I could globally set the log level of the kernel as illusionist suggested (and as is noted in this thread), but it seems like quite the brute force solution.
Is there nothing else I can do to suppress these messages?
Last edited by slavik262 (2013-03-05 16:00:19)

Similar Messages

  • [SOLVED] How to disable these messages at boot?

    So I managed to install Arch, and set up the network. I have a Broadcom 4313 wireless chip, all I had to do is blacklist the bcma module, because it conflicted with the brcmsmac module, both are loaded by default (no need to add anything to MODULES=(), only the blacklist bcma entry to modprobe.conf)
    So now I have a wlan0 interface that works perfectly fine, only I get these status messages during boot, that are totally unnecessary, see screenshot. These just pop up from nowhere, and annoy the heck out of me, disrupting the login and whatnot.
    So can these be turned off somehow? I suspect they come from the brcmsmac module itself.
    http://dl.dropbox.com/u/20678367/arch-n … ssages.png
    Mod edit:
    The image is too large: https://wiki.archlinux.org/index.php/Fo … s_and_Code
    Last edited by bernarcher (2011-10-18 19:16:57)

    junkie wrote:
    Gusar wrote:Add "dmesg -n 3" to /etc/rc.local
    That seems to solve my problem, thank you!
    Just out of curiosity, what numbers, or levels are available for the -n switch? The man doesn't state that.
    http://mailman.archlinux.org/pipermail/ … 21114.html
    https://bbs.archlinux.de/viewtopic.php?pid=267954 (it's from the German Arch forum, but the loglevel= stuff is in English)
    Full list: http://www.kernel.org/doc/Documentation … meters.txt
    Last edited by karol (2011-10-18 14:02:47)

  • [SOLVED] strange messages while booting

    Hi everyone.
    Since upgrading open source video card driver (xf86-video-ati), I get the following messages while booting:
    Fri Mar 30 10:26:25 2012: Found hardware: "HDA-Intel" "Realtek ALC272" "HDA:10ec0272,1179ff82,00100001" "0x1179" "0xff00"
    Fri Mar 30 10:26:25 2012: Hardware is initialized using a generic method
    Fri Mar 30 10:26:25 2012: Found hardware: "HDA-Intel" "ATI R6xx HDMI" "HDA:1002aa01,00aa0100,00100100" "0x1179" "0xff80"
    Fri Mar 30 10:26:25 2012: Hardware is initialized using a generic method
    What does they mean?
    Last edited by digitalone (2012-03-31 12:04:34)

    skottish wrote:It's in the ALSA section of the wiki. Just search for 'generic'.
    Thanks, that helped me.

  • [SOLVED] Scan for wireless networks at boot

    Lately I've been making extensive use of public wifi hotspots (libraries FTW), as mobile broadband is simply too unreliable to give me a persistent (and cheap) connection.
    Is it possible to use some combination of netcfg and wifi-select (or similar tools) to scan for wireless networks at boot?
    I've already got entries in rc.conf for my mobile dongle and automatically detecting ethernet connections, but it's pointless adding entries for whichever wireless profiles I might use as searching for these and discovering they don't exist just needlessly slows the boot process, whereas running something similar to wifi-select at boot (with a timeout so an unattended boot won't wait for me to make a selection) would avoid this.
    * Obviously I could just wait until the system has booted and then bring up the interface I wanted manually, but generally I only reboot my system after updates, and I only download updates at a wifi hotspot, so I was hoping to automate something here.
    Last edited by zoqaeski (2012-03-28 12:11:21)

    Isn't net-auto-wireless or net-profiles with menu what you want? https://wiki.archlinux.org/index.php/ne … omatically

  • Error Message at Boot-Up

    WRT54GX router with Wireless-G adapter ; I get the following error message at boot - "Query My Ca Information: InfoMyCa.exe - Ordinal Not Found - The ordinal 968 could not be located in the dynamic link library LIBEAY32.dll "
    Any help eliminating this message would be appreciated .

    Hi Bettybee2, and a warm welcome to the forums!
    As for deletion, feel free to switch iDisk Sync off and then toss the disk image. If you see a warning that the file is busy when you try to empty the Trash, log out and back in again and then empty the Trash.
    http://www.macworld.com/article/134651/2008/07/massiveidiskarchive.html

  • OSX Yosemite: cmd-M no longer showing/hiding the messages app

    OSX Yosemite: cmd-M no longer showing/hiding the messages app. Is there a new shortcut to get this to work?

    Remove Office 2008 for Mac using Microsoft deinstall procedure. Reinstall Office 2008 for Mac.  If there are updates, apply them. Using Disk Utility, verify/repair permissions on your boot drive.
    Does Office for Mac 2008 now work correctly? If not, you may want to repeat the above first sentence, and then update to Office for Mac 2011, and apply the latest (14.4.8) update which has Yosemite fixes.

  • Error messages when booting up

    Receive 3 error messages when booting up PS using Win 8. "Could not load the FastCore Routines Module, could not load the MMX Core, could not load the Multiprocess Support Module." Any explanation?

    Ah-ha! Seems there are two Adobe program folders, one under Program Files and one under Program Files (x86). I did not know about the one under Program Files.
    According to System Info:
    Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Required\Plug-Ins\
    Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Plug-ins\
    Creative Cloud app keeps wanting to update Photoshop CC but keeps failing. The error code is U44M1P7.
    Following is all of the System Info, showing the third-party plug-ins that I installed a few hours ago from onOne and Topaz. I can't see anything odd in this, and System Info says all the plug-ins loaded.
    Thanks for your help.
    Quote
    Adobe Photoshop Version: 14.1.2 (14.1.2 20130923.r.427 2013/09/23:23:00:00) x64
    Operating System: Windows 7 64-bit
    Version: 6.1 Service Pack 1
    System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
    Physical processor count: 2
    Logical processor count: 4
    Processor speed: 3093 MHz
    Built-in memory: 6088 MB
    Free memory: 4429 MB
    Memory available to Photoshop: 5289 MB
    Memory used by Photoshop: 59 %
    Image tile size: 1024K
    Image cache levels: 4
    Display: 1
    Display Bounds: top=0, left=0, bottom=900, right=1600
    OpenGL Drawing: Enabled.
    OpenGL Allow Old GPUs: Not Detected.
    OpenGL Drawing Mode: Basic
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: True.
    NumGPUs=1
    gpu[0].OGLVersion="3.0"
    gpu[0].MemoryMB=2108
    gpu[0].RectTextureSize=8192
    gpu[0].Renderer="Intel(R) HD Graphics 2000"
    gpu[0].RendererID=258
    gpu[0].Vendor="Intel"
    gpu[0].VendorID=32902
    gpu[0].HasNPOTSupport=1
    gpu[0].DriverVersion="9.17.10.3347"
    gpu[0].Driver="igdumd64.dll,igd10umd64.dll,igd10umd64.dll,igdumd32,igd10umd32,igd10umd32"
    gpu[0].DriverDate="20131031000000.000000-000"
    gpu[0].CompileProgramGLSL=1
    gpu[0].TestFrameBuffer=1
    gpu[0].OCLSupported=0
    gpu[0].CUDASupported=0
    gpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="1.30 - Intel Build 9.17.10.3347"
    gpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[1447]
    gpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[8]
    gpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[16]
    gpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[16]
    gpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[16]
    gpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
    gpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[512]
    gpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[1024]
    gpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[41]
    gpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
    gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
    gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
    gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
    gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
    gpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
    gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
    gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
    gpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
    gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
    gpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=0
    Serial number: 96040202581963319193
    Application folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\
    Temporary file path: C:\Users\RUSSEL~1\AppData\Local\Temp\
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      C:\, 1.35T, 1.10T free
    Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Required\Plug-Ins\
    Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Plug-ins\
    Installed components:
       ACE.dll   ACE 2013/07/14-12:09:50   79.543790   79.543790
       adbeape.dll   Adobe APE 2013/02/04-09:52:32   0.1160850   0.1160850
       AdobeLinguistic.dll   Adobe Linguisitc Library   7.0.0  
       AdobeOwl.dll   Adobe Owl 2013/03/03-12:10:08   5.0.13   79.533484
       AdobePDFL.dll   PDFL 2013/03/13-12:09:15   79.499517   79.499517
       AdobePIP.dll   Adobe Product Improvement Program   7.0.0.1786  
       AdobeXMP.dll   Adobe XMP Core 2013/03/13-12:09:15   79.151481   79.151481
       AdobeXMPFiles.dll   Adobe XMP Files 2013/03/13-12:09:15   79.151481   79.151481
       AdobeXMPScript.dll   Adobe XMP Script 2013/03/13-12:09:15   79.151481   79.151481
       adobe_caps.dll   Adobe CAPS   7,0,0,21  
       AGM.dll   AGM 2013/07/14-12:09:50   79.543790   79.543790
       ahclient.dll    AdobeHelp Dynamic Link Library   1,8,0,31  
       aif_core.dll   AIF   5.0   79.534508
       aif_ocl.dll   AIF   5.0   79.534508
       aif_ogl.dll   AIF   5.0   79.534508
       amtlib.dll   AMTLib (64 Bit)   7.0.0.169 BuildVersion: 7.0; BuildDate: Mon Apr 8 2013 2:31:50)   1.000000
       ARE.dll   ARE 2013/07/14-12:09:50   79.543790   79.543790
       AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
       AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
       Bib.dll   BIB 2013/07/14-12:09:50   79.543790   79.543790
       BIBUtils.dll   BIBUtils 2013/03/19-12:09:02   79.535293   79.535293
       boost_date_time.dll   DVA Product   7.0.0  
       boost_signals.dll   DVA Product   7.0.0  
       boost_system.dll   DVA Product   7.0.0  
       boost_threads.dll   DVA Product   7.0.0  
       cg.dll   NVIDIA Cg Runtime   3.0.00007  
       cgGL.dll   NVIDIA Cg Runtime   3.0.00007  
       CIT.dll   Adobe CIT   2.1.6.30929   2.1.6.30929
       CITThreading.dll   Adobe CITThreading   2.1.6.30929   2.1.6.30929
       CoolType.dll   CoolType 2013/07/14-12:09:50   79.543790   79.543790
       dvaaudiodevice.dll   DVA Product   7.0.0  
       dvacore.dll   DVA Product   7.0.0  
       dvamarshal.dll   DVA Product   7.0.0  
       dvamediatypes.dll   DVA Product   7.0.0  
       dvaplayer.dll   DVA Product   7.0.0  
       dvatransport.dll   DVA Product   7.0.0  
       dvaunittesting.dll   DVA Product   7.0.0  
       dynamiclink.dll   DVA Product   7.0.0  
       ExtendScript.dll   ExtendScript 2013/03/21-12:10:31   79.535742   79.535742
       FileInfo.dll   Adobe XMP FileInfo 2013/03/19-12:09:02   79.151561   79.151561
       filter_graph.dll   AIF   5.0   79.534508
       icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
       icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
       imslib.dll   IMSLib DLL   7.0.0.116  
       JP2KLib.dll   JP2KLib 2013/02/19-12:28:44   79.248139   79.248139
       libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)  
       libiomp5md.dll   Intel(R) OMP Runtime Library   5.0  
       libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0  
       LogSession.dll   LogSession   2.1.2.1785  
       mediacoreif.dll   DVA Product   7.0.0  
       MPS.dll   MPS 2013/03/15-13:25:52   79.535029   79.535029
       msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
       msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
       msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       ONCore7.dll   ONCore   7.0.0.0  
       ONCore8.dll   ONCore   7.0.0.0  
       ONCoreFoundation7.dll   ONCoreFoundation7   7, 0, 0, 0  
       ONCoreFoundation8.dll   ONCoreFoundation7   7, 0, 0, 0  
       ONDocument7.dll   ONDocument   7.0.0.0  
       ONDocument8.dll   ONDocument   7.0.0.0  
       ONProxySupport7.dll   ONProxySupport   1.0.0.0  
       ONProxySupport8.dll   ONProxySupport   1.0.0.0  
       PatchMatch.dll   PatchMatch 2013/06/11-12:08:08   79.542390   79.542390
       pdfsettings.dll   Adobe PDFSettings   1.04  
       Photoshop.dll   Adobe Photoshop CC   CC  
       Plugin.dll   Adobe Photoshop CC   CC  
       PlugPlugOwl.dll   Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit)   4.0.1.34  
       PSArt.dll   Adobe Photoshop CC   CC  
       PSViews.dll   Adobe Photoshop CC   CC  
       SCCore.dll   ScCore 2013/03/21-12:10:31   79.535742   79.535742
       ScriptUIFlex.dll   ScriptUIFlex 2013/03/21-12:10:31   79.535742   79.535742
       svml_dispmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0  
       tbb.dll   Intel(R) Threading Building Blocks for Windows   4, 1, 2012, 1003  
       tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   4, 1, 2012, 1003  
       updaternotifications.dll   Adobe Updater Notifications Library   7.0.1.102 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   7.0.1.102
       WRServices.dll   WRServices Mon Feb 25 2013 16:09:10   Build 0.19078   0.19078
    Required plug-ins:
       3D Studio 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Accented Edges 14.0
       Adaptive Wide Angle 14.0
       Angled Strokes 14.0
       Average 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Bas Relief 14.0
       BMP 14.0
       Camera Raw 8.0
       Camera Raw Filter 8.0
       Chalk & Charcoal 14.0
       Charcoal 14.0
       Chrome 14.0
       Cineon 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Clouds 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Collada 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Color Halftone 14.0
       Colored Pencil 14.0
       CompuServe GIF 14.0
       Conté Crayon 14.0
       Craquelure 14.0
       Crop and Straighten Photos 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Crop and Straighten Photos Filter 14.0
       Crosshatch 14.0
       Crystallize 14.0
       Cutout 14.0
       Dark Strokes 14.0
       De-Interlace 14.0
       Dicom 14.0
       Difference Clouds 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Diffuse Glow 14.0
       Displace 14.0
       Dry Brush 14.0
       Eazel Acquire 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Embed Watermark 4.0
       Entropy 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Extrude 14.0
       FastCore Routines 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Fibers 14.0
       Film Grain 14.0
       Filter Gallery 14.0
       Flash 3D 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Fresco 14.0
       Glass 14.0
       Glowing Edges 14.0
       Google Earth 4 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Grain 14.0
       Graphic Pen 14.0
       Halftone Pattern 14.0
       HDRMergeUI 14.0
       IFF Format 14.0
       Ink Outlines 14.0
       JPEG 2000 14.0
       Kurtosis 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Lens Blur 14.0
       Lens Correction 14.0
       Lens Flare 14.0
       Liquify 14.0
       Matlab Operation 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Maximum 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Mean 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Measurement Core 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Median 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Mezzotint 14.0
       Minimum 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       MMXCore Routines 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Mosaic Tiles 14.0
       Multiprocessor Support 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Neon Glow 14.0
       Note Paper 14.0
       NTSC Colors 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Ocean Ripple 14.0
       Oil Paint 14.0
       OpenEXR 14.0
       Paint Daubs 14.0
       Palette Knife 14.0
       Patchwork 14.0
       Paths to Illustrator 14.0
       PCX 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Photocopy 14.0
       Photoshop 3D Engine 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Picture Package Filter 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Pinch 14.0
       Pixar 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Plaster 14.0
       Plastic Wrap 14.0
       PNG 14.0
       Pointillize 14.0
       Polar Coordinates 14.0
       Portable Bit Map 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Poster Edges 14.0
       Radial Blur 14.0
       Radiance 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Range 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Read Watermark 4.0
       Reticulation 14.0
       Ripple 14.0
       Rough Pastels 14.0
       Save for Web 14.0
       ScriptingSupport 14.0
       Shake Reduction 14.0
       Shear 14.0
       Skewness 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Smart Blur 14.0
       Smudge Stick 14.0
       Solarize 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Spatter 14.0
       Spherize 14.0
       Sponge 14.0
       Sprayed Strokes 14.0
       Stained Glass 14.0
       Stamp 14.0
       Standard Deviation 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       STL 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Sumi-e 14.0
       Summation 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Targa 14.0
       Texturizer 14.0
       Tiles 14.0
       Torn Edges 14.0
       Twirl 14.0
       Underpainting 14.0
       Vanishing Point 14.0
       Variance 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Variations 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Water Paper 14.0
       Watercolor 14.0
       Wave 14.0
       Wavefront|OBJ 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       WIA Support 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Wind 14.0
       Wireless Bitmap 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       ZigZag 14.0
    Optional and third party plug-ins:
       Perfect Batch 8 8.1.0
       Perfect BW 8 8.1.0
       Perfect BW 8 Filter 8.1.0
       Perfect BW 8 Smart Filter 8.1.0
       Perfect Effects 4 4.0.4
       Perfect Effects 4 Filter 4.0.4
       Perfect Effects 4 Smart Filter 4.0.4
       Perfect Effects 8 8.1.0
       Perfect Effects 8 Filter 8.1.0
       Perfect Effects 8 Smart Filter 8.1.0
       Perfect Enhance 8 8.1.0
       Perfect Enhance 8 Filter 8.1.0
       Perfect Enhance 8 Smart Filter 8.1.0
       Perfect Mask 8 8.1.0
       Perfect Mask 8 Filter 8.1.0
       Perfect Mask 8 Smart Filter 8.1.0
       Perfect Portrait 8 8.1.0
       Perfect Portrait 8 Filter 8.1.0
       Perfect Portrait 8 Smart Filter 8.1.0
       Perfect Resize 8 8.1.0
       Perfect Resize 8 Engine Automation 8.1.0
       Perfect Resize 8 Engine Filter 8.1.0
       Perfect Resize 8 Filter 8.1.0
       Topaz Adjust 5 10.0
    Plug-ins that failed to load: NONE
    Flash:
       Kuler
       Adobe Exchange
    Installed TWAIN devices: NONE

  • I'm getting "Installer disk not found" message during boot camp 5 and windows 8 install on late 2011 MBP upgraded to Mavericks.

    hello,
    And thank you in advance.
    I'm getting "Installer disk not found" message during boot camp 5 and windows 8 install on late 20011 MBP upgraded to OS X 10.9 Mavericks. Any ideas?
    I've downloaded the Window support option software and the WindowSetupBox.exe and copied it to the USB drive. I tried to create an iso image from my Windows XP machine but recieved messages that Windows 8.1 could not run on XP.  I've ordered the Windows 8.1 backup media.
    Any way to proceed?
    Thanks  Tim

    download the win 8 iso from here;
    http://getintopc.com/softwares/operating-systems/download-windows-8-pro/
    then start over. install on to your usb along with the support software.

  • Installer disk not found message during boot camp 5 and windows 8 install on late 2001 MBP running Mavericks?

    I'm getting "Installer disk not found" message during boot camp 5 and windows 8 install on late 2001 MBP running Mavericks. Any ideas?
    I've downloaded the Window support option software and the WindowSetupBox.exe and copied it to the USB drive.
    Thanks  Tim 

    You might have better luck in the Boot Camp community. I'll ask the hosts to relocate your post.
    Boot Camp Community

  • Warning message on boot.

    I have a Netra ct800 running Solaris 5.8 Generic_108528-07.
    As the machine is coming up I notice a warning message which reads:
    "WARNING: scsb: HSC not initialized or AC not present!"
    My question is, what is this message trying to tell me.
    Is the a repository of error and warning messages that I can search?
    I ruled out AC for the 120v power line. The machine runs on -48 volts in the telco office.
    Thanks.
    Jim

    I had been noticing the fast tsc calibration failed message at boot for quite a long time on my old Samsung Q35 which is a BIOS boot netbook with arch running the x86 system. The message has continued to show up through many kernel updates including 3.17.4-1-ARCH.
    After doing a bit of research I found a simple solution to getting rid of this warning during boot. In my case I use grub as the bootloader and that is where a workaround is possible.
    I edited the following two lines in /etc/default/grub to add in "clocksource=tsc":
    GRUB_CMDLINE_LINUX_DEFAULT="quiet clocksource=tsc"
    GRUB_CMDLINE_LINUX="clocksource=tsc"
    Then regenerated the grub.cfg file with:
    grub-mkconfig -o /boot/grub/grub.cfg
    After rebooting the machine the tsc calibration warning no longer appears.  Presumably similar workarounds are available for other bootloaders also.
    Hope this may help even though I only discovered this workaround 5 months after this thread had its last post!
    Last edited by mcloaked (2014-12-05 21:42:27)

  • Sending SMS to server - Wireless Messaging API (WMA)

    Hello :-)!
    In general I want to create application for CLDC (with the use of MIDlet). (And maybe later to try the same with CDC). I want my application to create some data based on communication with the user of mobile phone and then to send little text file to the application on server computer.
    I found that there exists such a thing as WMA - Wireless Messaging API. I downloaded examplary .jar & .jad files (with sources and documentation):
    [http://www.forum.nokia.com/info/sw.nokia.com/id/9edb3299-e0f4-449d-a2fd-fa15ddbeed8b/MIDP_2_0_Wireless_Messaging_API_Example_v1_0.zip.html|http://www.forum.nokia.com/info/sw.nokia.com/id/9edb3299-e0f4-449d-a2fd-fa15ddbeed8b/MIDP_2_0_Wireless_Messaging_API_Example_v1_0.zip.html]
    and copied those files to Sony Ericsson K750i. I installed the application, run it, it asked me whether I want to allow this application to receive SMS, I answered yes and... nothing else happened and the application exited. I run this application once more, it doesn't do anything at all and exits.
    I tried to analyse the code but it didn't help me to notice what is wrong with the program.
    In init() there is initialization of what and where will be sent (port number and message). (Function init is called in startApp so in my application I will need to call it in the other place in the code and I will take the content of the message from the other place that jar or jad files, as in this examplary application).StartApp() calls init(), it listens to incoming messages, creates commend, label etc. (Probably I need to erase from this example code responsible for listening to incoming messages so that this examplary application will work on my Sony Ericsson?).
    CommandAction(c,d) sends text or binary message (depending on choice in the field cg.setSelectedIndex) or exits the application for "exit".
    ItemStateChanged() changes from binary to text mode and vice versa.
    SendBinaryMessage(connection,destAddress,Body) and sendTextMessage(...) send the message.
    I don't know what are those "private static final String".>
    Greetings:)!

    {color:#000080}Learn to live with it, this is the specified behavior for SMS sending. Unless you can hack your phone's firmware, there's nothing you can do about it.
    db{color}

  • Simple question: Physical wireless switch, and booting

    This is a question for those who have a laptop with a switch that enables or disables the wireless network: Do you have to manually press this button before you want to establish a wireless connection?
    Until kernel 2.6.31 I could start my wireless connection at boot without pressing any button. However, since kernel 2.6.32 I have to physically press the button on my laptop and then issue the command that establishes the connection (I use the net-profiles daemon for this). This means that I cannot establish the connection at boot. Various rfkill options (hard, soft, blocked, unblocked, or blacklisting rfkill) do not change this behavior. I was just wondering whether this is normal, and whether this can be avoided?
    I use an old laptop that I do not carry around, and it uses the rt2500pci driver. The BIOS does not have any settings that automatically enable wireless.
    Thanks!
    Last edited by anadyr (2012-04-23 14:28:59)

    With OSX, one can use a USB adapter (DLink and others make compatible adapters). Compatible PCI cards are also available. Both will need drivers; some PCI cards will work with the drivers imbedded in the OS. Typically, the required drivers will come packaged with the card or can be downloaded.
    The third option, and I think the best one, is to use an Ethernet Wireless Bridge. These communicate via the Mac's ethernet port and configure with a browser, so they are platform independent; no drivers are required. I use a DLink DWL G-820, but other vendors make them as well. Setup of the bridge adapters is a bit more difficult, but not terribly so.

  • Strange message while booting up.

    I get this message while booting and am wondering if anyone knows how to correct the problem.
    Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
    I haven't found any solutions or much explanation of what it is using google.

    When I read the message I felt brave enough to try installing this mysterious tomoyo-tools, system boots fine like I didn't have it and it's happened about for a week. I forgot to have installed that.
    Today my machine have had strange message and didn't boot, I've tried the fallback and the first time has worked. From fallback I have reinstalled tomoyo-tools, thinking some upgrade could have broken the package.
    Well, reboot the machine and system still not booting, neither fallback this time. WTH!
    I've used the livecd to move the binary /sbin/tomoyo-init (yes of course I can chroot and pacman -R but moving the binary was enough), booting correctly and pacman -R it.
    The last message written was about kernel start etc, and the system stuck.

  • Laptop mode -- where to find error messages on boot

    Hi guys,
    I get some error messages when booting. I have the time to read that they are related to laptop-mode, but they quickly disappear.
    I have activated the ENABLE_LAPTOP_MODE_TOOLS in my laptop-mode.conf file, but I can't find the error messages in /var/log :
    /var/log » ll nico@cotier
    total 2152
    -rw-r--r-- 1 root users 24082 20 mars 11:30 Xorg.0.log
    -rw-r--r-- 1 root users 24084 20 mars 10:35 Xorg.0.log.old
    -rw-r--r-- 1 root users 28050 1 juin 2013 Xorg.1.log
    -rw-r--r-- 1 root users 27492 1 juin 2013 Xorg.1.log.old
    -rw-r--r-- 1 root bumblebee 13679 1 juin 2013 Xorg.8.log
    -rw------- 1 root utmp 18816 20 mars 10:18 btmp
    -rw------- 1 root root 32032 20 mars 11:29 faillog
    drwxr-xr-x 2 root root 4096 16 juin 2013 httpd
    drwxr-sr-x+ 3 root systemd-journal 4096 1 juin 2013 journal
    -rw-r--r-- 1 root root 292292 20 mars 11:29 lastlog
    drwxr-xr-x 2 root root 4096 14 mars 2013 old
    -rw-r--r-- 1 root root 159892 19 mars 14:55 pacman.log
    -rw-r--r-- 1 root root 77572 5 oct. 00:47 pm-powersave.log
    -rw-r--r-- 1 root root 3586 1 juin 2013 slim.log
    drwxr-xr-x 2 root root 4096 9 mars 2013 speech-dispatcher
    -rw-rw-r-- 1 root utmp 1745280 20 mars 11:45 wtmp
    Do you know where they might be?
    Thanks!

    grep all these logs and systemd's journal.
    If you have 'quiet' on the kernel line of your bootloader, remove it.
    Last edited by karol (2014-03-20 11:52:42)

  • Where can I find javax.wireless.messaging

    Hello,
    I am trying to fellow the tutorial ( http://developers.sun.com/mobility/midp/articles/wma/ ) about sending SMS. I think I need a package called javax.wireless.messaging. Do you know where I can find this?

    The JSR is the source of the original proposal
    [http://jcp.org/en/jsr/detail?id=120]
    It is an API specification so you need the API and an actual implementation as well.
    The above has a reference implementation. A "reference implementation" is intended to demonstrate that the API is sufficient. It isn't intended to be a production implementation and there might be problems with it.
    Note that the API is not part of the Java API. Including 1.7
    That above url via the "Final Release 2" suggests that Sun has a real implementation (alternative to the reference). Probably commercial. There might be other implementations as well.

Maybe you are looking for

  • Time Machine with Two Separate Computers?

    Is it possible to have a hard drive connected to one computer physically backing up on Time Machine and have another computer wirelessly connect on the same network and have its own Time Machine backups on that hard drive? Can the wireless computer b

  • Big Bang XPower II no longer boots, no video

    I'm having issues with my Big Bang XPower II not booting. First, some background information... For a couple months my computer has been acting strangely. My monitors would randomly go to sleep, and nothing would wake them (mouse movement, keyboard p

  • Making the whole po line item as a non editable one (Greyed out)

    Hi all can any one please let me know is there is any way we can grey out the whole line item, i mean to say non editable mode. i am working on a user exit where based on certain field entries i have to make the whole line item as an non editable one

  • Loop through records in a table and update

    Hi there, Need some help here please. Sorry new to Oracle. I'm working with Oracle 10g. I have a table like this; ID Amount Date 123 5000 Oct-07-2011 123 null Oct-09-2011 124 7000 Oct-14-2011 124 null Oct-17-2011 124 null Oct-24-2011 What I'm trying

  • Yosemite imac mail

    Running yosemite 10.10 on my iMac.  Mail does fetch new emails. Can this be fixed?  How can I download a new version of the Mail app for my iMac?